Pdf and preview printing too big

This problem just began: When I click to print a pdf in either Adobe Reader or Preview, it prints off the page, way too big. The image is fine in the preview window. It happens identically on two printers. Gmail and google and Word docs print fine.
I have clicked FIT and scale in the Reader program, but the result is the same. It's obvioulsy a setting, but the answer is not obvious.

looking again, it prints badly in Chrome, Safari, pdf, preview but NOT Firefox.
And, I was wrong about Gmail. it prints wrong from gmail, too.

Similar Messages

Why does a PDF on preview print so slow on my macbook air?

Why does my PDF on preview print so slow on my macbook air?

Try deleting the current print queue ..
Open System Preferences > Print & Scan > Print
Click: Delete Print Queue ...
Delete all prints jobs
Restart your printer and your Mac.
Try printing a PDF formatted file.

Error trying to print report to both pdf and network printer

Hi all,
When trying to print a report to my network printer or to pdf I get the two errors attached, one right after the other. The resulting pdf or hard copy has almost everything in it, except for three tables which are completely missing. When I go back into the report and open the page with the missing table, the table is no longer visible in the report and I get the second error again. Exiting and restarting diadem brings the tables back.
I've found several threads about pdf and other print errors and tried the solutions there to no avail; specifically the one posted here.
I hope there is a fix to this! These reports are intended to sell management on diadem! Thanks!
OS Info:
Windows 7 64 bit SP1
18GB RAM
DIAdem Info:
Version: 11.3.0f4563
USI: 1.9.1f4681
DataFinder: 3.0.0f4681
Script Engine:
5,5,0,5207
Debugger: 6,0,0,8424
CLAD
Solved!
Go to Solution.
Attachments:
diadem print error 6-7-12.png ‏17 KB
diadem print error two .6-7-12.png ‏15 KB

Hello testingHotAir,
Just to make sure, do you have administrative privileges for this machine?
Also, you have attempted these exact steps as posted by lerman?
Make sure that you are logged in as Windows administrator.
Click the Windows button and click Printers.
Right-click the Diadem pdf Export and select Properties
Click the Ports tab, then click the Add Port button.
Note: If the Ports tab is greyed out, right-click the Diadem Pdf Export icon and select Run as admin.
Select Local Port and click the New Port button.
Enter PDF1 for the new port name and click OK. Close the Printer Ports window.
Put a checkmark in the box next to the PDF1 port if it is not already checked.
Click on the Advanced tab.
Select the Spool print documents radio button to make the options below it clickable.
Clear (uncheck) the box labeled Enable advanced printing features by clicking it.
Select the Print directly to printer radio button to make the options below not clickable.
Click the Apply button, then click OK.
Important: In order for the changes to take effect, you must restart your computer.
Reboot your computer and then try to print, email, or create a pdf from Diadem.
Regards,
Jeff L.
Applications Engineer | National Instruments

Gray box around images in PDF and when printing? Why?

Hi,
I'm using CS5 and I'm getting a gray box around any image embedded in my document. The box comes if I click on it when a PDF and it prints around them. I can't seem to figure this one out. I'm not used to prepping files for print and I'm trying to send this out to someone who needs to print it.
It's CMYK.
I've tried to flatten transparency using both vector and rasterize.
I've made sure the images are embedded.
I can't figure this out!!
Please, help.
Thanks.

does this look like your problem?
http://indesignsecrets.com/eliminating-ydb-yucky-discolored-box-syndrome.php

Configuring Export to PDF and Report Printing

Greetings
using Apex 3.1,Oracle 10g Release 2 on Hp-Unix
i have got to Configure
Export to PDF and Report Printing
please mention Documents or Links for the Configuration
thanks a lot

Hello ahuja
I would start here...
[APEX Printing|http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm]
Kind regards
Simon Gadd

I uploaded a photo onto my desk top and it was too big when I tried to change it I couldn't get into iPhoto it just wouldn't open

I uploaded a photo to my desk top as my screen saver and it was too big, when I tried to get back into iPhoto I couldnt, it wouldn't open, I closed it and tried again and it still will not open, can you help me?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

't' and 's' in font GFS Didot don't correspond to selected font size. 't' is too small, and 's' is too big. Can this be corrected?

't' and 's' in font GFS Didot don't correspond to selected font size. 't' is too small, and 's' is too big. Can this be corrected?
GFS Didot is nearest listed MUSE font in appearance to Adobe Caslon Pro, which is the font used in the book which the website is intended to promote. I would like to use Adobe Caslon Pro (I paid for it and it's on my computer, but not in the cloud). Is there any way to install Adobe Caslon Pro as a MUSE font choice in the cloud?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

I have a macbook and was having trouble with safari so I removed it and am trying to re-download but it says snow leopard and lion are too big. which version of safari can i download?

I have a macbook and was having trouble with safari so I removed it and am trying to re-download but it says snow leopard and lion are too big. which version of safari can i download?

Which operating system are you running? Not sure, click the apple on the left of the menu bar, the click about this mac. It will say version 10.6.x or 10.7.x.

Reader 11 pdf page numbers printing too high

After I upgraded to Adobe Reader 11, I have started having issues with page numbers on my pdf forms printing too high on the page. Instead of printing at the bottom of the page, they jump up to wherever the text on the page stops. For instance, if the text stops half way down the page, the page number prints one line beneath that text, so it's in the middle of the page instead of the bottom corner. The file looks fine on the screen, and if I print it in Reader 10 on another computer, it prints at the bottom of the page where it belongs. I've compared settings between my computer, and the computer where the file prints correctly, and I can't find any settings that are different. Has anyone else had this problem? And if so, suggestions for a solution?

looking again, it prints badly in Chrome, Safari, pdf, preview but NOT Firefox.
And, I was wrong about Gmail. it prints wrong from gmail, too.

Why do files (UPS labels) from the Internet not print properly (they used to), unless they're saved as PDFs and then printed?

Files from the Internet (for example a UPS label) no longer print properly (too light, faded out), whereas they used to print just fine directly from the Internet source. The only way they print properly now is to save the file as a PDF and print from that. So I'm think it's not the Canon printer. This hasn't happened before, and I'd like to know what I can do about it, what's going on. This is via Firefox and Safari on my Mac laptop, OS 10.6.8.
Thanks, David Smoak

2) Thanks for the tip. It isn't what I had in mind, but writing scripts to do the work (via tells to "System Events") and then invoking those scripts with osascript is indeed a reasonable solution.
3) You may not have understood me. The only peculiarity is that I sometimes see "Enable Folder Actions" in the menu even when Folder Actions are, in fact, globally enabled, so that I should instead be seeing "Disable Folder Actions" along with "Remove a Folder Action" and so forth. As you say, I always see "Configure Folder Actions...". Surely this is just a minor bug.
As far as the main issue, I don't believe I have any code that activates the Finder. My original message has a sample of one of my scripts, and you can see that it doesn't mention the Finder at all. As I said, I get the same behavior with the sample Folder Action scripts in /Library. As one more test, I tried a absolutely empty script---the Script Editor window contains not a single glyph when I save it. If I attach this completely empty script as a Folder Action to a folder, any addition or deletion from that folder activates the Finder, though nothing else happens. Still looking for help on this one!

PDF and Preview related problems

Hi:
A user in our office (MacBook Pro, v10.5.6) is having difficulty viewing and creating PDF files. To wit:
--Opening a PDF file results in a morass of symbols throughout.
--Opening a PDF file may show exclamation points substituted for tab characters.
Some other files appear to be just fine using Preview, and occasionally the latter of the two above will open and appear to be just fine and dandy. The files appear to be just fine on another Mac.
The two files appear correctly when viewed with Adobe Reader 9.0.
Also:
--Creating a PDF file may result in exclamation points substituted for tab characters.
I tried a full system software archive and install...no luck.
I tried deleting the Adobe Reader and Preview preferences files...no luck.
I dragged and dropped a copy of Preview (v4.1) from my computer to hers...no luck.
I created a Second User, and the previously mangled PDF files open and appear to be just fine. I can also create PDF files that are true to their source document (no exclamation points for tab characters). I did only limited testing of this; however I did use the files above and created a new PDF file using the original source document. No problems.
I don't believe this is a missing font problem.
So that makes me think there's something wrong in the user's home directory with Preview and the PDF creation process. Some preference file or something.
Before I go ahead and move my data over to a new home directory...
1. Has anyone seen this before?
2. Has anyone fixed this before?
3. How do I know which files to move to the new home directory and which (corrupted ones) to leave behind..if that indeed is the fix?
4. How do I know that the creation problem doesn't extend beyond this user, and that I wasn't just lucky when Second User's PDF-created file was fine?
TIA,
mm

You need to resolve the conflict/corruption in the original account. This can be a laborious process, but is guaranteed to resolve the problem. While logged into the newly created account (if it's an admin account; otherwise create a new one), backup the bad account's folder (to another volume, partition, or disk), delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. Run Preview and, If the problem's solved (which it should be), open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it, keeping track of what you're moving to the new account so you can remove them if you encounter problems in the next step. Log out and back in to ensure there's no conflict and things still work correctly. Good luck.

Function module to Print Customer Invoice as PDF and to Printer

Hi,
I am writing a program to create a document through FB01. After that I also need to a PRINT the customer invoice for Same document. I need to print Invoice as PDF and Report and print to a Printer. Which Function Modules can I use for these purposes.
Thanks.
FS
Moderator Message: SDN is not here to do your job for you. There are plenty of good developers who work at CSC who can help you out. Thread locked.
Edited by: Neil Gardiner on Oct 5, 2010 6:38 PM

Hi,
please see the given link,It may help you.
Re: Regarding Print Problem in ALV
Regards,
Shamma

No "convert to pdf " and no " print to pdf " option after install

I installed adobe acrobat reader professional 8 at home ( WIN 7 ) and everything works great there, but after installing it at work ( WIN 7 ) i have no option when i right click a file in the drop down menu that says " convert to adobe pdf ", and also in word i have no option to " Print to PDF " in the printer menu.
Thoses options are on my home PC but not work PC ? the only thing i can think of is a USER RESTRICTION that is in place that does not give my user account the option to use thoses two options ?
Im I wrong ? and if so how can i get thoses options at work like i have at home ?
TY for any help giving

cyberskin99 wrote:
I installed adobe acrobat reader professional 8
First, you either have Adobe Acrobat Pro 8 Or Adobe Reader 8. Acrobat Reader Professional 8 does not exist.
If you have Acrobat, we'll try and work this out. If you have Reader, you don't get either of those items since it's made for viewing/printing PDF's.
My suggestion is to open the application you installed then go to the Help dropdown and see whether it says Acrobat or Reader. Also, be sure you don't have both products installed since that could cause similar issues as this.

After Installing Premiere CC Update Icons and Worksurface became too big and cannot be change in small

Hi, ich have installed the new Cloud Update of Premiere Pro CC today. Well, I canot understand, why all Icons are too big now and I cannot make them smaller. If someone knows what I am talkig about, please help. Thanks

Hi Mark.
I have the same problem, but it works when i set the windows settings for the font and icons to 100% instead of 125% (standard) which is not optimal.
Do you have an other solution?
My specs are:
Windows 8.1 laptop X4578 15,6'' gaming bærbar | MM Vision
1920x1080 screen
Intel Core I7-4710MQ
Nvidia Geforce GTX 870M with geforce 344.11 driver (the latest)

Recently my PDF files have printed too dark. Has something changed in the software?

Why do my PDF files print too dark?

2many2cho0se wrote:
Yes...I know iMessage is supposed to be where there is wifi...
Actually, all iMessage requires is a data connection, & that data connection can be either WiFi or 3G.

Pdf and preview printing too big

Similar Messages

Maybe you are looking for