PDF annotation(comments) in acrobat increase file size rather than reader

Hi,
When I annotating(comments) files in Acrobat Professional(7 or 9) will increase the file size where as if I open the same file in adobe reader I can easily edit the page within short times,Please suggest what is the mechanism used in Acrobat.
Regards,
MohamedFaisal.

Hi MohamedFaisal,
I am not sure, if i understood you correctly. The file size grows big in Acrobat and when the same file is opened in Reader the size is less?
Also, please help us with the details mentioned below
1) Exact version of Acrobat being used
2) Exact version of Adobe Reader being used
3) Size difference, when opened in Acrobat Vs When opened in Reader.
4) How was the file Created.
Thanks,
Vikrantt Singh

Similar Messages

Reduce File Size and Optimise PDF both increase file size

Hi All
I have exported a pdf (our college mag) at smallest file size from Indesign CS4 for online use. The problem is the resultant file size is a little under 19Mb. Using both or either Reduce File Size or Optimise functions simply result in an increase to 22Mb. The document is packed with images however I would have thought one or both of these processes would have helped reduce the file size to a more manageable download file size.
A pdf is also produced to go to print so simply compressing all images prior to imcuding them in Indesign is not a preferable option - this would mean creating two separate Indesign documents, something which I would rather avoid if possible.
Any help would be greatly appreciated as always.
The file reside here if anyone cares to take a look http://www.ayrcoll.ac.uk/index.php?name=UpDownload&req=viewdownload&cid=11&orderby=dateD It's the latest release (September 09)
Thanks
Colin

You might want to do an audit of the PDF (button in PDF Optimizer) and try to figure out what the various parts are. It shows 58% is content streams (sorry, but I am not sure what that is), 26% is overhead, and only 12.7% is graphics. Since you are not storing bookmarks and such, you might want to try going back to ID and printing to the Adobe PDF printer for a comparison. It may be one technique is more efficient than the other.
When I used the optimizer, the file did get larger. When I used Reduce File Size, it got slightly smaller. The key may be in figuring out what the various parts are from the audit. You might try copying one page of ID to a new document and play with various versions - different fonts (all were embedded and that is probably best), variations on graphics, etc. That is all I can suggest since I would simply be playing with different ways to produce the document and looking at what is causing the bloat. When the Images are only 12.7% and the fonts less than 1%, there is something going on to produce the size, and those 2 are typically the killers. I would mention tags that tend to bloat, but you do not have any (normally used for assessibility).
You might want to try some of the preflight checks to find issues. I did the transparency check and got 170 instances in 22 pages. Flattening the page may help. There were some pages that seemed to be very bad. However, I did not get a big file size reduction. I did not get a lot of improvement by printing to a new PDF either. Certain pages seem to be part of the bloat problem. The print took a long time around pages 11 and 22.
One troubleshooting technique would be extract pages to separate files and look at the details of each page to see what is causing the issue.
Need to go. Good luck.

I publish a 41mb newsletter monthly into interactive pdf. It always becomes a file size of 4mb, 10% of original, when I save to pdf. This month my newsletter is 41mb and it drops to 11mb, 25% of original. I have re-sized all pictures, deleted pages separa

I publish a 41mb InDesign newsletter monthly into interactive pdf. It always becomes a file size of 4mb, 10% of original, when I save to pdf. This month my newsletter is 41mb and it drops to 11mb, 25% of original. I have re-sized all pictures, deleted pages separately, have gotten the file size down to 16mb and it drops to 7mb, 45% of original.
I have gone back and saved Feb and March and it saves to 10% of original, as it did before, and I use the same mechanism to save now.
I have gone to Acrobat Pro and optimized down to 8.8mb, but the quality is not acceptable.
What other variable is there that I haven't discovered?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Help!..CS4 IS INCREASING FILE SIZES.

Hi all
Wondered if anyone has had a problem with increased files sizes when opening a document up in Photoshop? Anything i open up is increased by two thirds in file size and i've no idea why ( e.g..8MB doc opens as 24MB doc)
What is even more strange is that it won't let me reduce a file size to anything under 1MB.
Has anyone ever come across this problem?...would appreciate any help.
Thanks
Bri

Hey Noel
Fair Play.
This is what is happening.
I’ve got a standard JPEG file that viewed in Explorer and Bridge reads as a 2.70MB (2838,796 bytes) file. Pixel dimensions 797x1000. Document size 6.75 x 8.47cm .Res 300 PPI.
When I open it in CS4 it reads 2.28MB. (This is the first thing I don’t understand)
Either way my simple( so I thought ) objective is to decrease the file size.
In the image size box I have re-set the resolution to 72ppi as I just need to post the image on a Website. My before and after calculations in the image Panel reads (was 2.28MB...now 134.3k)
Great! .this is what I want, However..... when I ‘save as’ and the JPEG compression box appears it has suddenly increased the file to 1.8MB Large file...and only allows me to reduce it to 1.7MB small file.
Admittedly this is not my area of expertise....I’m doing something wrong so any pointers would be much appreciated.
Bri

Increase File Size

After converting CR2 Raw files to Jpeg the size of the files is too small. How if possible Can one increase file size in Elements 9? Thanks

Why on earth do you want to have "larger" files?
JPG uses compression to reduce the size of the resulting files. If you're concerned about the picture quality because of JPG's lossy compression method, simply set the JPG "Quality" setting to its maximum.
Ken

SAP ISR -XI - SAP POS. File size more than 11 KB failing in Inbound

Hi All,
We are implementing SAP ISR- XI - POS Retail implementation using
Standard Content Store Connectivity 2.0, GM Store Connectivity 1.0, and
other contents.
In our Inbound Scenario File-RFC , we are picking files from FTP server
for sales and totals data and if the size of this sales data file in
format *_XI_INPUT.DAT is greater than 11 kb , it is failing at XI
Mapping level, saying Exception occurred during XSLT
mapping "GMTLog2IXRetailPOSLog" of the application. We have tried and tested at mapping level no error found as this is processing files below 11 Kb successfully with same mappings, Also this is standard Mapping by SAP in form of XI Content Store connectivity 2.0.
At XI Side we have processed the file of eg: 40 KB by splitting the record data and making
file size less than 11KB and it is being processed successfully, but file of 40 kb fails.
XI Server: AIX Server.
There may be some memory setting missing or some basis problem also. Kindly let me know how to proceed.
Regards,
Surbhi Bhagat

hi,
this is hard to believe that such small files cannot be processed
do your XI mappings work for any other flows with something more then 11kb?
let me know about that and then we will know some more
as this is realy very small size
maybe your XI was installed in on PocketPC
Regards,
Michal Krawczyk

Load and Read XML file size more than 4GB

Hi All
My environment is Oracle 10.2.0.4 on Solaris and I have processes to work with XML file as below detail by PL/SQL
1. I read XML file over HTTP port into XMLTYPE column in table.
2. I read value no.1 from table and extract to insert into another table
On test db, everything is work but I got below error when I use production XML file
     ORA-31186: Document contains too many nodes
Current XML size about 100MB but the procedure must support XML file size more than 4GB in the future.
Belows are some part of my code for your info.
1. Read XML by line into variable and insert into table
LOOP
UTL_HTTP.read_text(http_resp, v_resptext, 32767);
DBMS_LOB.writeappend (v_clob, LENGTH(v_resptext), v_resptext);
    END LOOP;
    INSERT INTO XMLTAB VALUES (XMLTYPE(v_clob));
2. Read cell value from XML column and extract to insert into another table
DECLARE
CURSOR c_xml IS
(SELECT trim(y.cvalue)
FROM XMLTAB xt,
XMLTable('/Table/Rows/Cells/Cell' PASSING xt.XMLDoc
COLUMNS
cvalue
VARCHAR(50)
PATH '/') y;
    BEGIN
OPEN c_xml;
FETCH c_xml INTO v_TempValue;
<Generate insert statement into another table>
EXIT WHEN c_xml%NOTFOUND;
CLOSE c_xml;
    END
And one more problem is performance issue when XML file is big, first step to load XML content to XMLTYPE column slowly.
Could you please suggest any solution to read large XML file and improve performance?
Thank you in advance.
Hiko

See Mark Drake's (Product Manager Oracle XMLDB, Oracle US) response in this old post: ORA-31167: 64k size limit for XML node
The "in a future release" reference, means that this boundary 64K / node issue, was lifted in 11g and onwards...
So first of all, if not only due to performance improvements, I would strongly suggest to upgrade to a database version which is supported by Oracle, see My Oracle Support... In short Oracle 10.2.x was in extended support up to summer 2013, if I am not mistaken and is currently not supported anymore...
If you are able to able to upgrade, please use the much, much more performing XMLType Securefile Binary XML storage option, instead of the XMLType (Basicfile) CLOB storage option.
HTH

Sorting files by file name rather than ID Tags

Some of my files have incomplete or missing ID Tags ( a lot of mp3's from vinyl) making sorting more difficult and I typically find it more usefull to sort by file name rather than ID Tag anyway. Does anyone know how to sort by file name?

Aloha!
While this is not possible in iTunes right now, I might be able to help.
It sounds like you've taken care to ensure that your music is properly labeled. That should make it easy to use a third party app to tag the lot as a batch. I am aware of one application that folks around here seem to like called "Tag & Rename" that can build a set of tags for you from folder and file names. I believe it has (or had) a free demo period as well. Try a google search or check out sites like versiontracker and you will find several apps that can do the task for you.
Once done, iTunes will be able to handle the collection that has apparently been with you for some time. Hope this helps you decide on a course of action.

Acrobat 7.0.9: Optimizing PDF increases file size?

Audit Space Usage in the Optimize dialog shows "Color Spaces" ballooning from 0.8 MB to 22 MB when a PDF is optimized (goes from 3% of the file size to 58%). File size increases from 23.8 MB to 35.6 MB.
What exactly is happening, and how can I fix it?
Thanks for any info.

Hey, Jon
Interesting...
Original file (300 dpi CMYK images) 23.8 MB
Images 19 MB
Color Spaces 0.8 MB
Optimize with flattening (72 dpi images, low quality) 68.7 MB
Images 49 MB
Color Spaces 18 MB
Optimize without flattening (72 dpi images, low quality) 68.2 MB
Images 48 MB
Color Spaces 18 MB
Not sure why color spaces are down to 18 MB from 22 MB, I used a preset that I THOUGHT was the same one I used yesterday. Regardless, it's bizarre that both images and color spaces are getting huge when optimized.
I used Create PDF from Multiple Files to bring in a bunch of pages, but I'm reasonably sure that all those files were already flattened before I brought them in.
I'll file that transparency tip for next time though, you never know when it might come up.
Thanks.

PDF Optimizer decreases resolution, increases file size

I've noticed that the file size of my PDF files INCREASES now when I optimize them now that I've updated to version 7.0.7. The image resolution still decreases but the files increase significantly. For example, I have a 2 page document that originally was 3.2mb as a hi-resolution PDF. After I optimized it down to 72dpi for the images the file increased to 20.5mb!! I use this feature for documents that we publish on our web sites or to send a proof to a customer.
Is this just a new bug in version 7.0.7?

MAC G5, 1 gb RAM, OS 10.4
Indesign CS3
Acrobat version : at least 7.0.6 or newer (I'm not at work to verify the version)
I'm having the same problem. Doing a SAVE AS does not fix anything.
I have created a High Res PDF of a 56 page catalogue using Indesign CS3. I had to divide the document into two sections. The first file is 131 megs and the other 78 megs. I have to print high res for the client. Then I need to downsize the resolution so that I can send the catalogue to the client. Whether I choose PDF Optimizer or Reduce file..., the 131 megs PDF became 1.27 GB and not to mention the time wasted! This is enormous! I assure you that I have checked all settings for the PDF.
To counter the problem, I have to do a SAVE AS POSCRIPT file. Then I reduce the size using Acrobat Distiller. The 131 megs file then became 21 megs, which is what it should have been with Optimizer.
I don't understand what's happening with the Optimizer? It seems that there's an update version that has installed this bug. Which one? How to fix this problem? Is there anyone on this earth that knows what to do?

Acrobat 9 Typewriter increasing file size

I have scanned forms that I need to edit with the Typewriter tool in Acrobat 9 Pro - basically I just need to add a date to the form and then e-mail it. Evidently I have accidentally clicked some box that I did not want to click, because now when I edit the one-page form (about 70k before editing) and type in any data whatsoever using the Typewriter tool, then save the form, the file balloons to anywhere from 0.6 to 0.9 MB. Which is crazy, and too large for me to submit.
Right now what I'm having to do is edit the form, save it, print it, and re-scan it. This is making me nuts. Does anyone have any suggestions?
I have tried Reduce File Size, the Optimizer, and downsampling, but nothing has worked. I can't make the file small enough to make a difference.
Thanks,
Beth

Base - 14 fonts
Standard Type 1 Fonts (Standard 14 Fonts)
Fourteen typefaces—known as the standard 14 fonts—have a special significance in PDF documents:
Times (v3) (in regular, italic, bold, and bold italic)
Courier (in regular, oblique, bold and bold oblique)
Helvetica (v3) (in regular, oblique, bold and bold oblique)
Symbol
Zapf Dingbats
These fonts are sometimes called the base fourteen fonts.[34] These fonts, or suitable substitute fonts with the same metrics, must always be available in all PDF readers and so need not be embedded in a PDF.[35] PDF viewers must know about the metrics of these fonts. Other fonts may be substituted if they are not embedded in a PDF.
Helvetica was developed in 1957 by Linotype. Arial was Monotype's attempt to make a font that looked like Helvetica (but without paying licensing fees) and was designed in 1982.
Microsoft didn't want to pay Linotype licensing fees to use Helvetica so it went instead with the cheaper Arial.
Arial is held in disregard by many professional typographers and type enthusiasts, for reasons relating to its similarity to other typefaces and the involvement of Microsoft in its development and distribution.[7] It is reinforced by Arial's apparent status as a de facto Helvetica stand-in, but without paying royalties, or credit, to Helvetica. Arial's glyph widths are nearly identical to those of Helvetica,[7][26] rather than Monotype Grotesque, on which Arial is otherwise based.[7] "But to an experienced designer," writes typographer Mark Simonson, using Arial "was like asking for Jimmy Stewart and getting Rich Little."

Adding Bates numbers to PDFs increases file size by 10x - How to keep original size?

I have a lot of email texts that I converted from Word to PDF and then Bates numbered.
However, Bates numbering made each email's file size go from about 50kb to 500kb.
Once I combine these larger files for uploading to a docket, at the maximum allowable file size is 4 Mb, I can put together only 8-10 emails at a time. What to do to keep the original file size small when Bates numbering?

Hi paulu40695891,
Yes, there is a significant increase in the file size when one applies bates numbering to the pdf and saves it.
A workaround for this issue would be to save the pdf file again as reduced size pdf. (File -> Save as other -> Reduced Size PDF. )
Does that helps with your issue? Please revert back for any further query or assistance.
Regards,
Rahul

Increased file size when converted from .docx to .pdf

Hello everyone,
I have been having problems with Adobe: I need to convert a large amount of Word documents (.docx) to Adobe files (.pdf). I need to keep the size of these documents small as there are limits designated to my project. I have converted a file of 27kb recently and it turned out as 207kb pdf file. When I save this, I select "Minimum Size" when saving in the "Optimize for" area. As far as I know, when converted, .pdf files should be smaller than the original files. Please help me on this
I am using Microsoft Office 2013 and Adobe Reader XI (11.0.06)

Not wrong. Different.
As it seems you are converting by saving as in Word, rather than using Adobe software. If you own Acrobat Pro, you can both use it to make the PDF (several different ways, many settings) and analyse the space usage.

Does publishing as PDF increase file size? Is there a way to manage this?

I am looking for any ways to reduce file size of presentations. We have to publish as PDF for single file purposes. I know you can change settings in Presenter publishing, but does publishing as PDF have any affect on file size and if so, are there ways to reduce file size?

My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years). I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely.
Is this what I have to do?
Thanks for your help!

How to export an interactive pdf from InDesign at a smaller file size.

I have a single page InDesign doc with a side navigation panel to the right of each page. This panel has interactive buttons created in InDesign.
When I export as an interactive pdf, the file size is over 27MB and I need it to be much lower.
I should mention that this doc was made from an original PRINT InDesign doc of facing pages, which was about 55MB.
When making it single pages for the interactive doc, the InDesign file size increased to 105MB.
Can anyone explain this and have any useful tips for saving the pdf down WITH interactivity working?
Many thanks.

Okay - With the 15MB pdf, when I go into the PDF Optimizer dialog box, it's telling me that the Fonts are using 40% and the Acrobat Forms are using 29%.
Anyone know of a way I can reduce either of these???
Many thanks in advance!

PDF annotation(comments) in acrobat increase file size rather than reader

Similar Messages

Maybe you are looking for