Pdf appear in the collection, but won't download from cloud

Hello everybody,
I have an issue now with the pdf I just Sync'ed. They appear in the collection shelf, but stay on the cloud.
I tap on the "download" disk on the right but nothing happens.
It is the first time my pdf are on the cloud when I synch from McBook to Ipad. They are usually usable as soon as the synh is complete.
What can I do?
My internet connection is fine, whayt is the problem?
Thank you for your help.
IOS 7.0.4

I've already been through all that, thanks though. According to my college tech team, Firefox has updated its security systems (or words to that effect), as the same issue is happening all across their network, not just my single device.

Similar Messages

  • Just got the IPhone 5. Photos won't download from cloud

    Just got the IPhone 5. Photos won't download from cloud

    You need to set up Photo Stream.
    Only the photos you take now will be available in photo stream not photos you have taken before your icloud is active.
    iCloud: Photo Stream FAQ
    Message was edited by: ckuan

  • I have an iPad 1.  I bought a book from iBooks and it is not downloading.  I bought it prerelease and I got an email that informed me it was ready.  The cover of the book appears in the library but does not download.  Does anyone know how to remedy this?

    I have an iPad and I bought a pre released book on iBooks.  The book cover appears in my library but it won't download.  Does anyone know what I should do?
    Mimi

    Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
    The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.

  • Music won't download from cloud

    Bought music on ipad...my account. Want to sync it with home macbook...someone else's. Used to sync music before, but now cannot do this. Ipad has not been updated to latest version. Can see artist and song, but cannot load it from the cloud. Any advise?

    Make sure you are signed in with the Apple ID used to purchase the music in Settings>iTunes & App Store, then download it as explained here: http://support.apple.com/kb/ht2519.

  • PS CS6 Extended won't download from Cloud

    I already own Ps CS6 and after buying a subscription to the Cloud, tried to download PsCS 6 Extended, but it wouldn't come through. I tried to download the trial version before I purchased the subscription, but that didn't come through either.

    From what I see on CS6 Cloud it only comes in extended version http://www.adobe.com/products/creativesuite/buying-guide.edu.html.
    So if you downloaded the CS6 cloud subsciption it would be the extendended version.  If the 3D option is grayed out then it must have something to do with OS or computer.

  • Movie won't download from cloud while having a billing issue

    I've got a billing issue with my account which hopefully will be resolved in the next 48 hours, but in the meantime, a movie that I had already purchased will not download from the icloud to my IPad mini.  Everytime I try to get it to download it takes me back to the billing screen.  I've already purchased this movie several years ago and shouldn't be having this issue, but here I am.  Is this something new that's going on with ITunes with this new update, and if so ***, I've already paid for this movie and my son wants to watch it so why am I having this issue while waiting on a different issue to be resolved?

    Click here and ask.
    (50556)

  • Firefox won't download from cloud storage

    I use Asus Webstorage - as that's what came with my tablet - and ever since Tuesday Firefox hasn't let me download anything I've saved to it. At first I thought it was just in college, but tonight I've discovered it's at home too.
    As far as I can tell, I can still upload files to the cloud from my tablet - at least, I could on Monday night - and up until Friday morning, when I downloaded an essay for college I'd saved on my tablet at home, I was able to download my files easily.
    What changed? What's going on? It's incredibly inconvenient.

    I've already been through all that, thanks though. According to my college tech team, Firefox has updated its security systems (or words to that effect), as the same issue is happening all across their network, not just my single device.

  • Video won't download from cloud

    I'm receiving an error message,  you do not have permission to access current resource,  how do I fix this?

    Are you logged into the Apple ID that purchased the movie?
    Settings > iTunes & App Store > Apple ID

  • Ipod won't download from cloud

    I set up everything to access the cloud.  It says i have 1700+ songs out there.  i added a few more songs on my computer and they moved up to the cloud as well. Can I now get these new songs to download to my ipod tough via the cloud? Or do i need to plug it into my PC to get it to update?

    It sounds like you are using iTunes Match. If so post here:
    https://discussions.apple.com/community/itunes/itunes_match

  • I live in the US but want to dowload from the Canadian iTunes.

    Is it possible to access the Canadian iTunes store so that I can download music from a Canadian artist? The artist I want to download is not available in the US iTunes store.
    Apple Dual G5   Mac OS X (10.4.3)  

    I also have this problem, I am in the UK but want to download from the French store.. you would have thought apple would have sorted it out so that this is possible.. it is frustrating to see the song you want in the French store and to be unable to get it..
    thomas

  • My iPod had music on it previously from my old computer but won't sync the new music I bought on my new laptop? The songs I bought appear in the library, but they won't sync onto my iPod?

    I'm going on a hike tomorrow with my dad and I'd been reluctant to download iTunes on my new laptop but finally decided to install it so I could have new music for the trip.  I bought nearly ninety new songs, all of which appeared in my library, and on my account they are shown with my old songs.  But my iPod isn't syncing the new music?  Really I planned to start from scratch and not have them together, but that would be fine if they would just download.  I don't understand.  They're in my library, but won't download to my iPod. 

    Hi avmary11,
    If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Regards,
    - Brenden

  • If I try to download a pdf document, it appears in the tab but not on screen. I am using Firefox. I tried it with Safari and the document appeared on screen but it wouldn't print.

    If I try to download a pdf document, details appear in the tab but not on screen. I am using Firefox. If I use Safari it appears on the screen but the print is blank.

    Hi...
    Quit your browsers.
    Open the Finder.
    From the menu bar click Go > Go to Folder
    Typs this exactly as you see it here:    /Library/Internet Plug-Ins
    Click Go
    Move the Adobe PDF Browser plugin  (or just PDF Browser plugin) to the Trash.
    Relaunch either Firefox or Safarai and try downloading a PDF document.

  • When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

    When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

    Hi NicoMan,
    According to your description ,we seem to suffer a performance issue here.
    Have you tried to open the task manager to check the system performance  ? Is there any specific process occupied many system resources ?Will the issue occur only with the specific applications ?
    We can try to restart the Windows Explorer process to have a check.
    If it only occurred with the spefcific two applications ,we can try to end the other application processes manually from the task manager to have a check .
    If this is caused by the specific application ,we may need to look for help from the third party support considering they are all the third party applications .
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • My macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    my macbook air won't get past the white apple screen.  I've tried power cycling the batter but won't help

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • TS1367 my mac book air opens to the password but won't go any further it stop right there!  What soulh I do?  I am sure I have the right pass word!

    My Mac book air opens to m the password but won't go any further,  it stop right there!  what should i do?  I am sure i have the right password

    Here's an old fix for the problem. Don't know it applies now:
    Clearing Caches to Fix Login Problem
    You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
    Be careful. Some of these commands are dangerous, since you are going to be root.
    Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
    /sbin/fsck -fy
    Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
    /sbin/mount -uw /
    cd /Library/Preferences
    rm com.apple.loginwindow.plist
    rm com.apple.windowserver.plist
    cd /Library/Caches
    rm -r *
    cd /System/Library
    cd /System/Library/Caches
    rm -r *
    reboot
    Press RETURN after each command.
    This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
    If it isn't applicable in your version of OS X, then I suggest:
    Be sure you backup your files to an external drive or second internal drive because the following
    procedure will remove everything from the hard drive.
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

Maybe you are looking for

  • Random shutdown MacBook Pro

    I can't find this specific problem anywhere apart from on postings that are a couple of years old. I have a 2 year-old Macbook Pro that has never given me a moment's worry. Except on the 1 January when it refused to start up. It would get to the grey

  • Settings in Jdeveloper - WebApplication. Mr. Frank Could u Pls check this

    Hi Mr. Frank, I m using Jdeveloper 9i version. I want to create a web application using Jdeveloper. is there any specified path is there to run suppose i want to run the project. ex: IDS home/J2ee/ Something like that... Also another doubt. I hv alre

  • Read-only mode. Object is currently locked by user: J2EE_ADMIN. hw 2 unlock

    Hi friends, <b>i am not able to edit my object in EP</b> , it says Read-only mode. Object is currently locked by user: J2EE_ADMIN. how do i unlock it ? i am on 04s SP9

  • Developer vs sqlplus

    Hi all in sqlplus I create table : create table pks (n varchar2(5)); insert into pks values ('ŽáŽá'); and error : ORA-12899: value too large for column "SYS"."PKS"."N" (actual: 8, maximum: 5) I tried this scenerio again in nls UTF8 and also EE8MSWIN1

  • Reg inspection lot cancellation

    Dear all, When I am cancelling material document of  GR (101) for a purchase order with account assignment-P (projects) and item category-S (third party) with insp type-01 , inspection lot is not getting cancelled. Where shall I make setting to cance