Pdf as print and never/not interactive

hi, is it possible to change the default pdf format from "interactive" to "print" - we would never use the interactive format and this i pretty annoying

Okay thanks, I reposted as my own question: http://forums.adobe.com/thread/1379464 and also in the scripting forum:
http://forums.adobe.com/thread/1379465
Here's hoping there's an answer!

Similar Messages

Adobe Pdf Converter Print Driver Will not install

Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > Set

I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

Saving as a PDF in print page order [not actual page order]?!?!

Hiya,
I've got a 20 page newsletter, each page A4, all created in InDesign CS3 [nice and simple]. I want to print the document in print page order [as appose to actual page order] on our printer here at work, because it's clever and can fold and staple to create a book/newsletter etc! In InDesign, I can obviously use the 'print booklet' option to do just this, and it works great; all my pages are printed in the correct order, I can also choose to print 2-sided, all lovely. But I was wondering if there is an option somewhere to be able to save my InDesign doc as a PDF in print page order [front with back, page 2 with 19 etc] - as printing a PDF of my artwork seems to solve a problem i was having in the thread I posted up yesterday.
Cheers guys

This is called "imposition". Does your OS and InDesign version come with the "Print as Booklet" option?
If not, you can enter this range into the page number "Range" box on exporting:
20,1,2,19,18,3,4,17,16,5,6,15,14,7,8,13,12,9-11
(Typed from memory; -- please check)
If I then print this PDF to my HP with the options "double sided" and "2 pages per sheet", it comes out exactly the way it should.
(Waiting for the printer ... hold on.)
Well whaddoyouknow -- I got the numbering right first time. Perfect!

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

HP Photosmart c309a no longer printing and drivers not available

My HP Photosmart c309a printer which previously worked successfully printing wirelessly suddenly stopped longer working and showed as Offline and the dirvers do not seem to be available for my Macbook Air. I have set the printer back to default settngs and reconfigured wireless and bluetooth. I have turned printer and laoptop on and off. I then removed the printer from the list in Printers and scanners in System Preferences and then have tried to add it it back. The Photosmart shows as a device to be added but when I add it, I then get a message:
"Can't install the software because it is not currently available from the Software Update server."
I have downloaded general HP Photosmart software from apple download site and that hasnt had any effect, and I have tried to download from HP site for C309a for mac http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en&os=4159&product=373... but there is no download available directly (like there is for Windows). The instructions take you to Printer & Scanners and Add printer, so same vicious circle as above. I have also tried adding the IP address for my printer but get the same message. After trying these various work arounds we can now prnt from daughters PC (after downloading drivers again from HP site) and other daughters mac is now working but i cant add my printer back to my selected prnters on mine. Hoping someone can help me very soon. Thanks Lisa

The radio may have failed. Let's try a test:
Make sure the radio is enabled. The blue Wi-Fi light should be on.
Turn off the Bluetooth radio. The blue BT light should be off.
Press and release together the <setup> and <#> keys. A diagnostic report will be generated.
At the top of the report is a section labeled [ USB Host ]. Tell me the RNDIS PID/VID values.
At the bottom of the report is a section labeled Undirected Scan - Wireless Networks Found = X. Tell me how many networks are detected, the names of the networks, the channel and the RSSI. Also tell me which one is yours.
If the PID/VID in step #4 is N/C and there are no wireless networks found in step #5, then the radio may have failed.
One last check is to turn the printer off and unplug the power supply. Then while pressing and holding the # the 6 keys, plug in the printer power. Hold the keys for 10 seconds then release.
After the printer initializes, repeat the steps above and report back.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

As suggested by adobe support contacted Epson.   What I expected no help. Since it works ok with PSE10, PSE 9, CS5 it could not be their problem.
However PSE 11 have changed something in the sequence of events.
I then downloaded a trial version of Lightroom 4.   no problem everything works.
I have been offered a refund for PSE11.     That is not encourageing. Does that mean wait for PSE12?????
I developed a bypass - every time I start up PSE11 I just print a dummy image thumb nail size.   then go on to regular printing and all works.
original discussion
Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

Was on facebook and screen suddenly changed to very small print and fuzzy not clear, so I switched to another browser and it was ok on there

while scrolling thru my facebook page. The screen suddenly changed to very small print and blurred / fuzzy not clear. The whole page had changed the way it was showing. So I tried another browser and facebook page was working fine. Went back to firefox and still had issues.

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Officejet 6600 shut down while printing and will not turn back on

I was printing a few documents on my printer and everythign was working fine, then there was a loud click and the touch screen turned blue and the printer shut down. I could not power it back up using the power button, so I tried unplugging it and re-plugging it and it did not work. I have the device plugged into a surge protector so I plugged it into the wall and it still did not work. (Note: all other devices on surge protector were able to get power, so it was not that). I do not know what to do. I need the printer for business and school ASAP and the product is still under warrenty. The warrenty ends September this year (I believe). I would like to bring it into the store if I can and exchange it, but I do not have the box. I do not know if there is something HP can give me to be able to return the product to Staples, or how long it will take to go through HP for the warrenty, but again, I need this printer ASAP and all of the troubleshooting I've done so far has not helped. This is not the first time the printer has shut down while printing more than one document, however this is the first time it has not been able to turn back on either by pressing the power button or unplugging it and replugging it back in. Any help would be great!

Hi @Stacki
I don't know what Staples return policy is. I suggest calling us so we can help.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Update --PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

Adobe seem to have implemented the CS5 print screen format.
PSE11
1. page setup the entire OSX print screen comes up where you then set all your settings including paper type, paper size and all other things including paper format, colorsync or epson etc.     you then save it       and finally go to print.    completely different.
2. options select profile
3. print
it also seems everytime you go to print the actual paper size is not remembered you must go in select page set up again   do nothing then go out and it adjusst itself again. Yes, my osx preference file is set recognize this printer as my primary printer.
More as the story unfolds.    I have yet to hear if anyone have this problem.
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly

Changed Profiles after printing many prints..     this time the first print was dark/black muddy as on my previous discussion... follow up prints fine....
see early discussion about 12 hours ago

I will suggest you to re verify that the Profile of your image and Profile of printer are same.
PSE11 prints an image in two different scenario:-
1. When Color Handling is governed by Photoshop Elements and 2. When Color handling is governed by Printer
I will explain you these two scenario in detail.
1. Open your image in PSE11.
2. Go to Image > Mode and note down the image mode.
3. Now launch Print dialog.
4. Click "More Options" button present on Print dialog.
5. Now select Color Management tab.\
6. Here you can find Image Space , this should be same as you noted down in 2nd step.
7. From here you can control Color Handling options.
    a) From "Color Handling" drop down you can select either "Printer Manages Color" or "Photoshop Elements Manages Color".
    b) If you select Printer Manages color then you can see the profile of your printer in Printer Profile, that you cannot change.
    c) But if you will select "Photoshop Elements Manages Color" then you can change the Printer Profile.
   Now in both cases, for best result, make sure that that Image Space and Printer Profile is same.
   Also if you are using Photoshop Elements Manages Color then please turn off the Color Management of printer from your Printer Preferences option.
If your Printer Profile is known to you then you can also change the Image mode from Image > Mode menu.
For best result of printing it is necessary that both Image and Printer profile are same.
Hope it will help you in your problem.
Cheers !!!

Wont open pdf files, print, and lags excessively

pdf files show url but a completely black screen. when I hit Ctrl P, no print box comes up, nothing print. LAG. Worst ever! AND so many disabled add-ons. It wiped out my printer.

Hi Gregory ..
Go to /Library/Internet Plug-Ins
Move the Adobe PDF Browser plugin (or just PDF Browser plugin) to the Trash.
Quit then relaunch Safari to test.

Export PDF file as a file, not Interactive Form

hi all,
The scenario is about exporting OTF from Bapi and I want to export PDF file through SAVE AS pop up instead of showing as Interactive Form.
The main treat is the enormous time consuming if the Bapi exports many number of lines of table. In this case, there's 1000+ lines of table then WD Java consumes 15+ to create a PDF showing on Interactive Form. Finally, WD Java app gives a short-dump screen as failing to update PDF. Then I prefer another solution which is EXPORTING PDF FILE AS A FILE THOUGH SAVE-AS POPUP INSTEAD OF SHOWING ON INTERACTIVE FORM.
Could you help me on this? Any matters, please feel free to let me know. Thanks in advance.
Peerasit

Hello,
You can try third party API to write into pdf file after getting data from Bapi. Search for Apache POI.
Best Regards,
Pankaj Sharma

I paid for the convertion from pdf to word and its not letting me???

I paid for the convertion from PDF to word i received a confirmation number, but it is not converting, Why?????????

Hi Rosa,
I'd like to assist! Are you receiving a particular error message? I see you have verified your subscription...
There is also this handy 'getting started' guide that may help.
Looking forward to hearing back from you!
Regards, Stacy

Sluggish at initial opening and loading websites, google maps print and images not working right, problems are not present in Chrome and Safari

Firefox is very slow opening. Web pages load slowly. When I go to images in a Google search, the pictures take a long time to load, and when I click on an image, then the back arrow, the loading time for the previous page is very slow. When I print a Google map, it is small, rather than full-page. In Google Chrome or Safari, the same actions product immediate results. I cannot get Google desktop to work.

This sounds like a network problem, since it goes away when you connect through a different network. You'll need to talk to your university's IT department about this.

Have a wireless printer and will not print in color, prints black

My wireless printer will not print in color, prints in black & white

Have you contacted the manufacturers support?
Clinton

Pdf as print and never/not interactive

Similar Messages

Maybe you are looking for