PDF attachment sign and save problem

I've used digital signatures for quite a while without problem. Recently, I've noticed that when trying to digitally sign a PDF attachment from Outlook 2003 or 2010 using Adobe Acrobat Standard 7, I get an error when clicking Sign and Save. The Sign and Save As button works fine
Error is:
The document could not be signed.
There was an error when attempting to commit this signature. The document was not saved.
The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder.
Any help is greatly appreciated! TIA!

I will try that, thank you.
Jim Dodge
English Proofreading Coordinator
ASIST Translation Services
4891 Sawmill Road, Suite 200
Columbus, OH 43235-7266
www.ASISTtranslations.com
Tel: 937-596-6649
NOTICE: This electronic mail transmission is for the use of the named
individual or entity to which it is directed and may contain information
that is privileged or confidential. It is not to be transmitted to or
received by anyone other than the named addressee (or a person authorized
to deliver it to the named addressee). It is not to be copied or forwarded
to any unauthorized persons. If you have received this electronic mail
transmission in error, delete it from your system without copying or
forwarding it, and notify the sender of the error by replying via email or
by calling ASIST Translation Services, Inc. at (614) 451-6744, so that our
address record can be corrected.

Similar Messages

Unable to digitally sign and save a PDF document

I am currently using ADOBE ACROBAT 8.0 Professional (Ver 8.1.0). I provide proofreading service for a client. The client provides me with a PDF which I use the comment and mark up tool to indicate required changes. Once all of the comments are complete, I mark the document approved or disapproved and attach a digital signature.
Recently, many files that I have recieved from the client will not allow me to sign and save the PDF. I can save the PDF without the signature but not when it is digitally signed. The error reads:
"The document could not be saved. A number is out of range"
I queried my client to find out if they have made any changes. They have recently upgraded to Illustrator 4 and they create the PDF's for me from the Illustrator files they work from. There are four teams using the same Illustrator program but not all of them are producing files that I cannot sign and save.
Can anyone tell me what the error indicates? Is there a property assigned to the document that I can not recognize that refers to this problem.
Since the files I work on contain proprietary information, I prefer not to attach them to this forum. If anyone is interested in helping, I will share a file to fully explain my problem.

I will try that, thank you.
Jim Dodge
English Proofreading Coordinator
ASIST Translation Services
4891 Sawmill Road, Suite 200
Columbus, OH 43235-7266
www.ASISTtranslations.com
Tel: 937-596-6649
NOTICE: This electronic mail transmission is for the use of the named
individual or entity to which it is directed and may contain information
that is privileged or confidential. It is not to be transmitted to or
received by anyone other than the named addressee (or a person authorized
to deliver it to the named addressee). It is not to be copied or forwarded
to any unauthorized persons. If you have received this electronic mail
transmission in error, delete it from your system without copying or
forwarding it, and notify the sender of the error by replying via email or
by calling ASIST Translation Services, Inc. at (614) 451-6744, so that our
address record can be corrected.

'Sign and Save As' in Acrobat 8.1.2 Professional

Hello!
I realize this is not a critical error or anything, but it is a major nuisance to the tech-unsavy and easily frustrated in my office.
When signing a document with a Digital Signature in Acrobat 7.0, you had the option to "Sign and Save" which would allow you to do so with one click. In Acrobat 8.0, that option has been replaced with "Sign and Save As" which gives you no choice but to browse to the folder you want to save the file. It automatically opens to the right folder, but you then have to click again to confirm that you want to overwrite the existing file.
Since our files are always in the same folder and always replace the one preceding it, this is completely unnecessary and I inevitably get a call from someone in the office who freezes when confronted with a scary dialogue box asking for input.
So my questions is: is there a setting to revert back to "Sign and Save"? Or is this an option in a more recent version of Acrobat?
Thank you in advance for any help.
Best,
Perry

Unfortunately, it looks like the "sign and save as" behavior is the only one available in Acrobat 8 and 9. I believe this was because many people were confused about where the signed document ended up or wanted to preserve the original pre-signature document and didn't realize they were going to overwrite it.
I don't see any setting related to this in the Security Administration Guide at www.adobe.com/go/acrobat_security

Share and save problem after latest update

hello,
i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app but problem is still and app doesn't work properly ) how can i downgrade to the old version ? Could you fix this problem quickly ?

i use app which called "aLogcat"
--------- beginning of /dev/log/main
I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
--------- beginning of /dev/log/system
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

Let Users Annotate A PDF In Browser And Save To Server?

I started this discussion here.
I have a bunch of PDF documents. I want users to be able to make annotations in their browser, and save them back to my server.
If I use Acrobat X Pro and click on "Send For Shared Review", then it behaves the way I want. However, I don't want to have to manually open Acrobat every time for each file.
Unfortunately, the Acrobat X SDK doesn't support this feature.
I heard that there's another way to do this with FDF files and LiveCycle. Is that right? How do I do that?
What I want is very simple. I want to write a program that will:
- Take a pdf file from my server.
- Enable the users to make annotations in their browser, as if I used "Send For Shared Review"
- Save the annotations back to my server.
- Merge the annotations into a new PDF document.
I can do this with Acrobat via the GUI. I want to write a program that does if for me. Can I do this with LiveCycle?

Thanks for the reply.
I know that having them both is not only unsupported, but has been a huge pain in the rump. However, This team needs Acrobat, and corporate policy as of yet hasn't been edited to allow the removal of Reader.
While it's been a pain for other issues, The users have been running both for around 12 months now, and the save button has always worked. Suddenly yesterday afternoon (after it had been working in the morning) the save is grayed out. There must be some configuration issue that has caused this...
I'm near the point of having acrobat uninstalled/reinstalled, and the reg entry we found to get them both working re-applied, but that's kind of a worst case option at the moment.

PSE10 Photobook print and save problem

Hey all
I have had some major problems with creating Photobooks on PSE10.
The problem is that I have is that it is not saving the PSE file correctly.
My last project (kids school prject) was complete (8 pages) and looked good with a title page.
I tried to print a few test pages and noticed that it printed the title page and page 2, skipping page 1.
After saving and exiting the program, I re-opened the file and the title page was gone and all of the other pages had a screwed up template that was twice as wide the template. The problem was compouneded by a lack of flexiblity in the printing area. Anything I tried did not work..ARRRRGGGG... Advanced mode was not too much help.
I finally saved it as a PDF, opened it Acrobat and was able to print. The project is still screwed up, but I was able to print it.
It would be great if Adobe allowed more flexiblity with the "page settings and size" for the canvas.
Templates are good, but more flexiblity is needed.
PSE10 should allow saving or exporting of a Photo Book to individual PSD files.
I am using a Win7 system, and a Canon iP6000 printer. The Photo Book template that I was using was "Storyteller".
Any ideas?

Hi,
There aren't any specific steps or settings for saving or printing a document.
To save it just single click on the agreement under the Manage page, and click the "PDF" button towards the top of the page. This will open the document in your default PDF viewing application where you can save it to your local system.
Once it is saved, I would try printing it from there. Having it saved to your system may make a difference.
Unfortunately, printing issues are difficult to troubleshoot since it deals with your local hardware and your local system.
Thanks,
Jat

Read Email Attachment Document and Save it in DMS

Hi
I have developd a zFM for reading the email attachment and storing it in SAP.(CV01N)
using the FM for SO_DOCUMENT_READ_API1(Read attachement) CVAPI_DOC_CHECKIN(Save Document) FM for save it in SAP.
After reading the attachemtn am getting Hexa decimal Values and i have convert into binary.
But the output is showing can't open the file.
How to solve this?
CALL FUNCTION 'SO_DOCUMENT_READ_API1'
          EXPORTING
            document_id                = lv_doc_id
          IMPORTING
            document_data              = lw_doc_data
          TABLES
            object_content             = lt_objcontent
            contents_hex               = lt_contents_hex
          EXCEPTIONS
            document_id_not_exist      = 1
            operation_no_authorization = 2
            x_error                    = 3
            OTHERS                     = 4.
Converteing Hexa decimal into srting by loop the internal table lt_contents_hex.
lv_raw concatenate hexa decimal values
          CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
            EXPORTING
              buffer        = lv_raw
            IMPORTING
              output_length = lv_length
            TABLES
              binary_tab    = it_temp_binary.
     CALL FUNCTION 'CVAPI_DOC_CHECKIN' ......

Hi,
thank you.
The DB-Version is 9.2.0.4.0
This document does not help me...
I need to create any procedure that inserts the nodes(tag-name) and when the node has any content then the content too in the table and s.o., so how I have it entered in the question...
Any Idea?
Regards

Sending an e-mail with pdf attachment and logo as a signature

Hi,
My task is to send an email with pdf attachement. And an image file need to be added as a signature. Is it possible, if so, can anyone please guide me?
Thanking you.
Kumar.

Hi
I'm having the same issue, except my application actually sends the email but the attachment is 0 octet and it doesn't even give me an error... Any chance you found a solution for this and could share it ?
Thanks

PDF attachment opens wrong file

I have had a few problems now when emailing a PDF attachment.
I save a document as a PDF and then email it to a client however
when the client opens the attachment, it opens a previous
attachment that I sent them i.e. I send them an invoice dated
15/09/08 however when they open the attachment, the invoice is for
one that I sent months ago dated 12/02/08. I usually save the PDF
attachment as the same file name each month hence overiding the
previous saved file so I'm not sure why it would open as an old
file. Any help on this would be greatly appreciated

Welcome to our community, charmyaus
You are in a forum designed for supporting Adobe Captivate.
From what you have posted, it would seem your question would be
better suited for the Adobe Acrobat forum. You might try re-posting
the question there. The link below should take you there.
Click
here to visit the Acrobat forums
Cheers... Rick

Video grab and save using labview

Dear All
I am trying to grab and save a video from ni smart camera (NI 1744). I
am using Grab and save vi which is attached. I open a new project in
labview 10. To this project I add the smart camera as a RT target and
then add the attached grab and save vi under the smart camera in the
project. I right click the smart camera and select " Deploy all".
Deployment starts but it terminates displaying the following error
message:
" LabVIEW: Failed to load shared library
nivissvc.*:LV_AviMovieOpen:C. Ensure that the library is present on
the RT target. Use MAX to install NI software or FTP to transfer
custom libraries to the RT target.
Deployment completed with errors "
Kindly note that I am able to grab a video using MAX (Measurement and
Automation) without any problem. I have also re installed IMAQ RT,
Vision RT, IMAQdx RT and Labview RT on the smart camera several times
but that has not solved the problem. I shall be really grateful if
anyone can provide any guidance regarding how to carry out successful
deployment of the attached vi or if anyone can suggest an alternative
way of grabbing and saving a video from NI smart Camera (NI 1744).
System Specifications: Toshiba Satellite Laptop, Windows 7 home
premium. Labview 10.
Attachments:
Grab and Save to AVI IMAQdx 8_6.vi ‏54 KB

AVI is still not supported for the 1744, which uses a VxWorks Operating System (as compared with the newer series of smart cameras the 177x which use pharlap OS and support the new AVI functions).
Attached is a sample LV project and code to illustrate how to acquire images on your smart camera and write those to a network image variable. I also made a host side VI to read the image variable where you can use your AVI function to save to your local host machine images acquired from the smart camera.
Hopes thishelps,
Brad
Attachments:
Smart Camera Acq Example.zip ‏35 KB

Signing and saving a document in Acrobat 8.0

We would like to bypass the sign and save As dialog which appears when
1. Sign a document
2. click on Sign
Is there any way we could acheive this

We have written a plugin. We do not wish to interfere with the Signing process. All we want is that the original document should be saved with the signature instead of displaying the Save As dialog.
In Acrobat 7.0, there were 2 buttons on the Sig Dialog viz. "Sign And Save" and "Sign And Save As". Sign And Save would save the signature in the same document. However in Acrobat 8, there is only one button "Sign" and this button displays the Save As dialog. The behavior is similar to Sign And Save As in Acrobat 7.

Signing and saving docs

I am creating a fillable form with Digital signature approval. I want to have the approval sign the document and it automatically saves as a unique name so it can then be emailed to the next approver. Help - I am not a programmer!

We have written a plugin. We do not wish to interfere with the Signing process. All we want is that the original document should be saved with the signature instead of displaying the Save As dialog.
In Acrobat 7.0, there were 2 buttons on the Sig Dialog viz. "Sign And Save" and "Sign And Save As". Sign And Save would save the signature in the same document. However in Acrobat 8, there is only one button "Sign" and this button displays the Save As dialog. The behavior is similar to Sign And Save As in Acrobat 7.

How to sign a pdf file and save it directly back to sharepoint site?

Hello,
I own a Sharepoint site for testing. It is installed in my computer with Sharepoint 2010 (WSS). What I want to do is to find a way to achieve a signing function for pdf file type on sharepoint.
By refer to this site below, the site has been able to recognize pdf file type and open it and edit it directly on the sharepoint site.
http://www.portalsolutions.net/Blog/Lists/Posts/Post.aspx?ID=40
I can edit the pdf file by checking out and then the modification will be save directly back to the pdf file in the shared document library when I am done. Now the problem is, I cannot save the pdf directly back to sharepoint after I inserted a digital signature
to the pdf file.
Everytime I inserted a digital signature to the pdf file, a "save as..." window would pop up and asked me to save the signed pdf file as another file in my local computer, so the changes were not applied to the original pdf file on the shared document library
of my sharepoint site. I have to upload the local signed version back to the site and replace the old one manually.
Any suggestion? Thank you.
Mengxin Wu

Hi,
According to my analysis, for Digital Signatures: Adobe has changed the behavior around digital signatures and SharePoint-hosted PDF files. Now, when digitally signing a SharePoint-hosted PDF file, it will be saved directly to SharePoint if that PDF file
is already checked out. If not, the user will be prompted to check it out. When digitally signing a SharePoint-hosted PDF file in Acrobat X, Version 10.0, the user would be prompted to save that file locally and would then need to upload it separately to SharePoint
as a new version.
I suggest that you use Acrobat X, then check the result. For more information about Acrobat X, please refer to
http://blogs.adobe.com/pdfitmatters/2011/06/whats-new-in-acrobat-x-version-10-1.html
In addition, you can also consider the following third-party tool:
http://www.arx.com/digital-signature/sharepoint
Thanks,
Rock Wang

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

PDF Attachment problem in Adobe form and send mail is not working

Dear Experts,
                     Recently i'm facing a problem regarding Adobe form PDF attachment and sending an e-mail along with the PDF attachment to customer mail id.But when i execute the RFC Function module, in customer side no mail is comming. And when i check the transaction SBWP then i found that the PDF attachment hold only 1KB of data which is not right.For that i'm sending my code which i was declared in my program.Can anybody please help me to overcome this problem?
Warm Regards,
sameek.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
data: t_att_content_hex type SOLIX_TAB.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
DATA: lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
        l_send type ADR6-SMTP_ADDR value 'Already provided an e-mail address here'.
DATA: lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
Message body and subject*
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Customer Information Form').
TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'Customer Information Form'
I_ATTACHMENT_SIZE =*
I_ATTACHMENT_LANGUAGE = SPACE*
I_ATT_CONTENT_TEXT =*
I_ATTACHMENT_HEADER =*
      i_att_content_hex = t_att_content_hex ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment*
Pass the document to send request*
lo_send_request->set_document( lo_document ).
Create sender*
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).*
Set sender*
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient*
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).*
Set recipient*
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(*
EXPORTING*
i_recipient = lo_recipient*
i_express = 'X' ).*
Send email*
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'The Customer Information form has been emailed to the Employee' type 'I'.

I am also facing issue with email send .
apex 4.1.1 oracle 11g
create or replace procedure email ( p_email in    varchar2)
is
    l_workspace_id      number;
    l_subject           varchar2(2000);
    l_body              clob;
    l_body_html         clob;
     l_email varchar2(40);
begin
    l_workspace_id := apex_util.find_security_group_id (p_workspace => 'xyz');
    apex_util.set_security_group_id (p_security_group_id => l_workspace_id);
l_email:= p_email;
    l_body := ' ';
    l_subject := 'You have new tasks';
    --if l_email=:P3_CONFIRM_EMAIL_ADDRESS is not null then
   -- email( l_email =>:P3_CONFIRM_EMAIL );
-- end if;
        l_body_html := '<p />The following tasks have been added.';
     apex_mail.send (
            p_to        => l_email ,
            p_from      => '[email protected]',
            p_body      => l_body,
            p_body_html => l_body_html,
            p_subj      => l_subject );
APEX_MAIL.PUSH_QUEUE;
end; I also check the log and queue but both are empty,
select * from
apex_mail_queue
select * from
apex_mail_log Kindly suggest what to do ?
I also created a process in apex , which call this procedure and pass the email address entered by user.

PDF attachment sign and save problem

Similar Messages

Maybe you are looking for