Pdf converter pro not converting all columns

pdf converter pro not converting all columns

I'm using FrameMaker 7.1 to create multi-file user manual books (one file = one chapter). In Book view, I use the File > Save Book As... option to create the PDFs.
Most of the FrameMaker cross-references work in the PDF, jumping to the referenced location as expected. Not all do, however. If there is a common trait among the jumps that won't jump, I have not identified it.
I have downloaded the entire 7.1 "upgrade library" from the Adobe Web site (one update), but the problem persists. Any thoughts would be appreciated.
Thanks.
DC Smith

Similar Messages

ADF FACES: af:table not rendering all columns

I'm using ADF EA 17 with myFaces 1.0.9 on JBoss 4.0.1/JVM 1.4.2_07-b05. The af:table is embedded within an af:panelgroup (being body of af:panelbox).
The af:table is not rendering all columns (only last 2 out of 8 cols total). The model behind the af:table is a java.util.List. Debugging shows that the list is filled up with beans correctly and that each of the properties of such a bean corresponding to a table column are also set correctly.
Strange thing is that sometimes all columns are rendered ok. Especially if i make heavy changes on the jsp (e.g. removing all but 2 cols from the af:table) and dropping it into the .../jboss/server/../tmp/deploy/tmpXYZ-exp.war directory. Restarting JBoss results in the old behaviour. Also closing browser and re-opening it yields to the missing columns again.
I've set breakpoints on the bean properties representing on table column and i can see, that the getter methods aren't called (all but those 2 that get rendered finally)
Table has multiselection enabled with 1 command button.
This happens with both IE 6 and Firefox 1.0.4; no oracle, myFaces exceptions visible on console or any log file.
Has anybody made same experiences so far or an idea what the problem really is ?
best regards,
Christoph.

I've tried it also with a plain af:table without any surrounding af:panelgroup or/and af:panelbox. Same result.
The bean holding the table-model (the java.util.List) is in session-scope. the table-model is update by an actionListener fetching values from an EJB. Could the session-scope be a problem ?
Potential candidates from my point of view, that might cause trouble here:
--) Caching (i've seen that sort of "CachedRenderers" are used
--) partial page rendering
--) multi-threading issue.
--) or any silly mistake of mine :-)
best regards,
Christoph

Table not displaying all column

hi my table>adf table does not display all column when i run the application it only display the first three column but in design it display all column

hi user,
i think so some panelcollection is closely strecthed, so only this problem.
go to panelcollection make it as styleClass=" AFStretchWidth" .
solution:
if you are used panelcollection inside af:table means it will suits.
or else go to the af:table add this
styleClass=" AFStretchWidth"
columnStretching="last"
or else some problem:
please elaborate or else paste the part of the code.

PDF: Convert all text to 100%K / Black

I am trying to take a pdf manual with images and text, and convert all of the text to 100%K. Currently there is text set to tints of black, and color values. I've been looking through all of the custom preflight fixups and can't find a way to accomplish this. Any ideas?

I am trying to take a pdf manual with images and text, and convert all of the text to 100%K. Currently there is text set to tints of black, and color values. I've been looking through all of the custom preflight fixups and can't find a way to accomplish this. Any ideas?

UNION ALL: converting all columns to_char

I have a union all statement. I want to convert all the fields to character using to_char. Is there any quick way to do this or do i have to put to_char before each field?

Say you have three queries: one on Tab1, Tab2 and Tab3.
To order them in that way in your queryresult, you could do something like this:
select x.col1, x.col2, ...
from (select 1 OB_COLUMN, t.col1, t.col2, ...
      from Tab1 t
      union all
      select 2, t.col1, t.col2, ...
      from Tab2 t
      union all
      select 3, t.col1, t.col2, ...
      from Tab3 t
      order by ob_column) x
/This might even be better...
select x.col1, x.col2, ...
from (select 1 OB_COLUMN, t.col1, t.col2, ...
      from Tab1 t
      union all
      select 2, t.col1, t.col2, ...
      from Tab2 t
      union all
      select 3, t.col1, t.col2, ...
      from Tab3 t) x
order by x.ob_column
/Edited by: Toon Koppelaars on Oct 10, 2009 10:58 AM
(added other alternative)

Function module u0091GET_PRINT_PARAMETERSu0092 Not showing all columns

Hello all,
I am using function module GET_PRINT_PARAMETERS
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      DESTINATION    = LOC_DEST
      COPIES         = WF_COPIES
      LIST_NAME      = WF_LISTNAME
      LIST_TEXT      = WF_LISTTEXT
      IMMEDIATELY    = ' '
      RELEASE        = ' '
      NEW_LIST_ID    = 'X'
      EXPIRATION     = WF_DAYS
      LINE_SIZE      = 132
      LINE_COUNT     = 65
      LAYOUT         = 'X_65_132'
      SAP_COVER_PAGE = 'X'
      RECEIVER       = 'SAP*'
      DEPARTMENT     = ''
      NO_DIALOG      = 'X'
    IMPORTING
      OUT_PARAMETERS = WF_PARAMS
      VALID          = WF_VALID.
NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
    PERFORM WRITE_PDF_SUMMARY USING P_VALID P_COND P_ZMGC P_ZOGC P_PDF.
    NEW-PAGE PRINT OFF.
But in my report there are 10 columns and in download file its showing only 6 columns .If I increase that size to X_65_200 Then it shows all columns But its not readable. Please tell me how can I use that fix size X_65_132 & it will show all columns .
Message was edited by:
        megha waykar

You r right,But that program is already developed in following sequence
*==> 1. Create Virtual Spool
            using FUNCTION 'GET_PRINT_PARAMETERS'
*==> 2. Write Report to Virtual Spool. Use NEW-PAGE PRINT ON option.
            NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
            PERFORM WRITE_PDF_SUMMARY USING P_VALID
            NEW-PAGE PRINT OFF.
*===> 3. Prepare Path and set spool number.
*===> 4. Convert List to PDF format.
             Use function 'CONVERT_ABAPSPOOLJOB_2_PDF'
*==> 5. download PDF file
            CALL FUNCTION 'GUI_DOWNLOAD'.
and it's not showing readable download file.
I don't have to change whole coding. I just want to increase that font.

Out put in Background (SM37) not showing All columns

Hi Folks,
Im creating an out put display for my query in background , we have define an output device , after submitting the query in back ground it just showing me only 10 columns . I mean I its not showing me all columns when I went to SE37-> select job->spool ->view (display).
Why its happening?
Please help me
Cheers
Usman

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen youll see properties hit that, itll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns.
Hope thisll help you .
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

CRM 2011 Outlook Client not showing all columns in Opportunity Views

Versions:
CRM: 2011 On-Premise - 5.0.9688.1533
Outlook: 2010 Professional - 14.0.6122.5000 32bit
CRM Client for Outlook: 5.0.9690.1992
Basic Problem
The Outlook Client views that show up in Opportunities do not have all the columns that are in the view.
Some of the views do, but not all of them.
Example:
View Name: Won Opportunities
Columns in view: Created on, Location, Quote Type, Scope of Work, Quote Number, Booked Sale Date.....8 other
columns (many custom columns)
Columns in View in Outlook: Icon, Quote Number, Categories, Flag....thats all.
Other Notes
This only happens in the Opportunity section of the Outlook Client.
This does not happen in advanced find in Outlook or anywhere in the web client. This does not happen for any other entity.
This happens on all of our users Outlook clients.
I have tried recreating the view.
No error messages are recording in any logs that I can find.
Any ideas on why this is happening or how to fix it?
Thank you
Paul

1. Are you sure this is a System View and not a User Defined View? Can you take a screenshot of all the availalbe Outlook views when you click on the little down arrow to add a new view? Yes. See the screen shot at the bottom. It is a public
view.
2. What happens when you close the view and add it back? same results.
3. What happens when you restart Outlook? I ask because if you customized your System Views, those are only persistent for a given session. If your restart Outlook, then it should reset the View. we have tried that. and uninstalled Outlook client
and reinstalled. And uninstalled Outlook and reinstalled. Same results. The only view that works for opportunities is the Default Custom View. The strange thing is that the filters are working just fine. just not the columns.
4. A workaround - have you tried creating a new System View similar to the one you want? Yes. same results

POWL not showing all columns

Hi,
I am sending the field catalogs with 60 columns but only 40 cols are displayed. I looped through the IT of field catalog and made all col visibility to abap_true. But still then I am not getting all the cols.
Please help me.
thanks in advance.
best regards,
suresh.

Hi,
There are some limitations on ALV, I know that there are only 255 column max in ALV display(Maybe because of Microsoft Excel). and also there are limitations on the characters number, I'm not sure about that, may not more than 5000 char, you can check it in help.
Hope this helps
Bob

Concatenated PDF file does not show all content.

When I concatenate 2 single page pdf file into one pdf file, the concatenated page does not show all the content. It misses the last line on the 2nd page.
However the thumbnails view shows the missing line correctly.
Also, if I view the concatenated pdf into another pdf view, it shows the content correctly.

Upon further research in the merged pdf file, it appears the merged pdf file has 2 references to the same field "UFE_ISSUE_DATE".
If I edit the pdf file in the text editor and change one of the field name to "UFE_ISSUE_DATE_TEST", then the pdf gets rendered correctly with date value shown correctly!
So, we decided to use 2 different field names in each of the individual pdf for this field only.
But, what causes confusion is that we do have several other fields with same field name in each of the individual pdf file, but upon merge they appear correctly. Searching for such field name in the merged pdf file via text editor, I can see only 1 reference. Not sure, why this particular field "UFE_ISSUE_DATE" has 2 references in the merged pdf file.
Any one has any thoughts?

SALV_WD_TABLE not showing all columns in Enhancement package 4

Hi all,
I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
Any suggestions?
Thanks,
Regards,
Morten

>
Morten Pedersen wrote:
> Hi all,
>
> I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
>
> Any suggestions?
>
> Thanks,
>
> Regards,
> Morten
Hi,
Are you suggesting that it was working in earlier version , now with sp4 it is not working without any modification happened ?
In that case i would raise a Support ticket.
Otherwise , you can see if there a method configure_alv and is there any column deletion is happening !!
There may be a Customizing change happened that the layout is changed and become default.

DB Adapter not returning all columns from a sql table type

Using Soa Suite 10.1.3.4.
Calling DB Adapter from bpel to a database package procedure with an OUT NOCOPY parameter based on a TABLE OF type.
It works fine except that I only get the first 14 columns out of 55.
Can query all columns from Sqldeveloper or Sqlplus.
XML skema reflects all columns correct.
Same result without NOCOPY in parameter.
HaveI missed some details/limitations?

hi
here is how I solved it.
first create custom view that will find all requred data.
in my case it was
tables :
ADRCITYT
ADRCITY
ADRPCDCITY
T005S
T005U
joins :
ADRCITY     CLIENT     =     ADRCITYT     CLIENT
ADRCITY     COUNTRY     =     ADRCITYT     COUNTRY
ADRCITY     CITY_CODE     =     ADRCITYT     CITY_CODE
ADRCITY     CLIENT     =     ADRPCDCITY     CLIENT
ADRCITY     COUNTRY     =     ADRPCDCITY     COUNTRY
ADRCITY     CITY_CODE     =     ADRPCDCITY     CITY_CODE
T005S     MANDT     =     ADRCITY     CLIENT
T005S     BLAND     =     ADRCITY     REGION
T005S     MANDT     =     T005U     MANDT
T005S     LAND1     =     T005U     LAND1
T005S     BLAND     =     T005U     BLAND
and finaly searh help
ORT01     3     3     PAD_ORT01
CITY_CODE     0     2     CITY_CODE
PSTLZ     1     1     PSTLZ_HR
STATE     4     4     REGIO
BEZEI     5     5     BEZEI20
COUNTRY     0     6     LAND1
LANGU     0     7     LANGU

SM37 - Not displayed all columns in results

Hi all,
I would like to ask you for help - I need to download some data from BSEG. Via SE16 I define criteria in BSEG (customer numbers, fiscal year etc.) and via Setting - List format - Choose fields select 5 columns that I need to have as output.
If I use background processing, I don't have displayed only 5 columns that I need, but 64 from 285 fixed columns. The columns that I need, have higher number than 64 therefore they aren't displayed.
Is there any possiblity how to display all columns?
Thank you in advance.

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen youll see properties hit that, itll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns.
Hope thisll help you .
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Macbook Pro not using all available resources

Hey All,
I have a MacBook Pro with Retina Display (Late 2013) with the 750M and 16 GB RAM. I monitor most of my resource stats with MenuMeters and I've been noticing that it doesn't use all the available power to complete a given task, I assume to save battery life. What I'm wondering is, can i change some settings to allow my processor to run faster (not overclock, just use a higher percentage of available CPU power)? For example, I was updating league of legends, and the launcher was scanning itself to check for discrepancies. It took a minute or two and I noticed that my CPU percentage hovered around 20-25% and my SSD read speeds were not even close to the theoretical maximum (I've got the PCI-e interface). Is it just poor programming that doesn't let my computer work its hardest? I feel like I have a Porsche with governor on it.

Expanding on the above, with 64-bit systems like Mountain Lion, RAM becomes critical. 4GB is a bare minimum. And will fall short if you add a few hungry apps. What happens then? Unix's fallback for low RAM conditions kicks in: virtual memory. The system tries to simulate what it does not have: extra "RAM" in the shape of a chunk of hard disk space where unneded stuff gets dumped to free real RAM. Now the system starts to lag as it desperately tries to guess which part of stuff in RAM can be moved to the disk and waits till the slow disk operation concludes. Worst case is when space runs out in the drive and all comes crashing down.
So, upgrade and give the big cat at least 8GB RAM. Can go up to 16GB. And always leave AT LEAST 10% of the drive empty.
Lastly, if you want to know what your cores and threads are up to, start up Activity Monitor. Click on the CPU tab at the bottom part of the window. Then double-click on the CPU graph. A new window will pop open, showing the load on each thread the CPU can handle concurrently.

The BI report created by Query designer does not display all columns

Dear Experts,
I have created a BI report using the Query Designer.
When I execute the query, only 6 columns have been displayed.
The total columns are 12. I need to display all 12 columns at the first instance.
Could any one help me to resolve this problem?
Thank you very much!
Arthur

Hi Athul,
Thanks for your reply.
There is not marked for '.Supress Zero' in the Rows and Columns.
And I did not check for 'Hide repeated values' in the Display tab.
Any other place you could suggest to verify?
Thanks
Arthur

Pdf converter pro not converting all columns

Similar Messages

Maybe you are looking for