PDF convertion for standard text

Hi all,
Currently i am using this function module "SX_OBJECT_CONVERT_OTF_PDF",
working fine for script out puts.
but i want to convert the standard text also as a pdf file . we are using 4.0 version.
I am reading the standard text through READ_TEXT.
Please do needful.
Regards,
Giridhar P

Hi Ravi,
after reading the Standard test the file format is :
li_cnt_txt like solisti1 occurs 0 with header line.
But the OTF file is like ITCOO this structure which is having only 2 fields.
please suggest me how i can go ahead
Thank you.
Regards,
Giridhar

Similar Messages

How to get F4 help for Standard Text Key of a operation based on Order type

Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
Bujji

Hi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM

PDF converter for Mac Snow Leopard

What would be the best PDF-converter for my Mac OSX 10.6.4 Snow Leopard?
Thanks for advice.
Vallis

Well, I think actually you can try this *PDF converter*.
It could convert PDF to Word, PowerPoint, Excel, Epub and 2 other format.
Extremely easy to use and really friend interface.
Only 1 thing I want to complain is it just support 50 files in a batch.
Wish it could help though.

How to create transport request for standard text created using SO10.

Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna L

Hi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva

Why when I try to subscribe to PDF converter for Word-nothing happens-have entered password & ID and

Why when I try to subscribe to PDF converter for Word - nothing happens- have entered password and email which have been verified. Please advise

House & Garden wrote:
PDF converter for Word
Not sure what you mean...
PDF to Word : ExportPDF : post in http://forums.adobe.com/community/exportpdf
Word to PDF : CreatePDF : post in http://forums.adobe.com/community/createpdf

Recruitment Faxing & e-mailing only possible for standard text in SAPscript

Hi,
I am using the old recruitment module PA-RC ion ECC6 and I am trying to send an email to an applicant. When I try and do this I get message "Faxing and e-mailing only possible for standard text in SAPscript". In feature WPROC I am set up to use RTF. Is there no way to send RTF emails? Do I need to create SapScripts for anything that I may possibly want to email?
Thanks
Tom

Apparently only able to carry this out in SAPScript

How to create REQUEST NUMBER for STANDARD TEXT (SO10)

how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

you can do this using program RSTXTRAN .
Text key - object
Text key - name
Text key - ID
Text key - language, then it will store under one transport that can be moved to other system.
check out the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

When will get 64-bit PDF converter for 64-bit Firefox variants (Cyberfox, Waterfox, etc.)

I use 64-bit Firefox variants (Cyberfox, Waterfox, etc.), and am frustrated that the PDF Converter addin with Acrobat Pro X and XI does not yet work with them. I understand that a 64-bit DLL is needed for the add-in to work. Inasmuch as the PDF converter works with 64-bit IE-9 and IE-10 and Office2007/2010, I am at a loss to understand why a 64-bit PDF converter add-in for Firefox 64-bit variants is not available. WHEN?
Thank you.

Someday. This is a question asked multiple times but the answer is always the same, there is no real benefit to moving to 64 bit Firefox, and the amount of work required to do something with no benefit makes this a low priority. Eventually it will happen, but just because it uses 64bit doesn't magically make things better.

PDF Converter for Acrobat Pro 8 problem in windows 7 (64)

Hi,
I just recently upgraded to Windows 7 - 64 bit and I am getting the following error message when I try to print to the Adobe PDF printer:
%%[ Error: undefined; OffendingCommand: setdistillerparams; ErrorInfo: CalCMYKProfile U.S. Web Coated (SWOP) v2 ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
Error accessing color profile: U.S. Web Coated (SWOP) v2
%%[ Warning: PostScript error. No PDF file produced. ] %%
I am using Adobe Acrobat 8 professional version 8.1.4 that came with CS3 Design Premium and have installed all current updates. Regardless of the chosen program (Word, Excel, Photoshop) when I attempt to print to the Adobe PDF printer, the print job stops at about 10% completion with the above error message.
Any suggestions?
Thanks,
Kyle

Thanks everyone for the helpful hints.
In the end I unstalled and then re-installed the entire Adobe Premium CS3 in Windows 7 (64 bit). The big difference was loading the adobepdf.dll_64 file at the proper point during the installation process.
Adobe has published a full explanation of this issue at the following URL:
http://kb2.adobe.com/cps/401/kb401731.html
Once installed, it's also important to update Acrobat 8 to the latest revision to get the PDF Converter working again.
Thanks again,
Kyle

Language change for standard text

How to change the language of standard text.
ex; from 'EN' to 'CS'

Hi,
Refer note 3355 in OSS for a complete explanation. The SAPscript objects that should be transported must be written in a
     transport request.
     The entries are as follows:
     R3TR FORM NAME (NAME = Name of the layout set)
     R3TR STYL NAME (NAME = Name of the style)
     R3TR TEXT OBJECT,NAME,ID,L
     (OBJECT = Text object, NAME = Text name, ID = Text ID, L = Text language)
     If you want to transport a number of texts, you can use report RSTXTRAN to insert the individual text keys into a
     correction.
     The transport request must be entered and released via the transport system.
Reward points if helpful
Regards.
Srikanta Gope

Smart forms. How to setup logic for standard text usage.

Hi All!
Could you advise please is there a way, except abap programming, to setup in smart forms that different standard texts values (tcode so10) to be used based on different selected parameters (e.g. customers, vendors etc... ).
e.g.
For picking list smart form:
for customer A- standard text A to be used.
for customer B- standard text B....
Thanks,
Best Regards,
Andrey
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM

HI,
Refer this thread:
Re: how to display symbols in smartforms
There is a standard smartform for invoice.
LB_BIL_INVOICE.
Refer this thread:
Re: Can anybody plz give me Smartforms print prog for Invoice/PackList
Regards,
Gayathri
Message was edited by: Gayathri Hariharan

Transposrt request for standard text

Hi,
I have made changes to a standard text in SO10. It didnt ask for any transport request. IN se10 i created a workbench request. But the task is for this request is unclassified. How would i change it to Development/correction.
Please let me know.
Ster

Hi,
Steps..
Create a work bench CR in the transaction SE09..
Modify the task to Development correction / Repair..
Go to the program RSTXTRAN..
In the name of correction give the task number (Not the CR number)
Give the Text Key..Your standard text name..
Press F8...
Press select all..
Then Press enter..
Then press the button "Trsfr texts to corr".
Now the standard texts will be moved to a CR..
Then release the CR and move it to QA..
If you want to move it to another client..
Use the transaction SCC1.
Thanks,
Naren

Transport req. generation for standard text

Hi,
I have done changes in standard text in trans. SO10 and could anyone let me know like how to generate transport req. for these changes for moving the same to Quality as i didnt get any transport req. generaton while i was trying to save my changes.
Please advise.
Thanks
Naga

HI,
Don't provide any value to this field 'Name of correction '
Name of correction - blank
Text key - object    - TEXT
Text key - name    - <Object name created in SO10'
Text key - ID         - 'ST'
Text key - language - 'EN'
Press F8 now you can see the you Text Object
- select your text object and press enter.
- now you can see the button in application toolbar 'Trsfr text to corr' press this button
- you get the pop up window for the TR.

Doubt in creating the transport request for "STANDARD TEXT""

HI ALL,
i used the standard text in scripts but i am getting the problem while creating the transport request for that,
i am not able to create the transport request for that,if anybody knows plzlet me know,
this is very urgent,
thanks and regards,
saikrishna.

HI SURESH ,
THANKS FOR UR IMMEDIATE REPLY ,
i executed that report in that i have given
Name of Correction : ZREPST
Textkey-object:
Text key name:
Text key - ID: ST
Text key - language :EN
Here Textkey-object,Text key name
wat i have to ,give after that ,can i execute that ,
will it create the request.
plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
plz let me know immediately,
thanks and regards,
saikrishna.

Formatting for Standard Texts not Applying

Hi ,
Now Ia m working on BTE's . In BTE function module I am writing some text and saving it By SAVE_TEXT. In that Iam possing all the variables Including Style Name.And I am using this standard text as a body of the email.In that email Body the Formating options are not appying.
Can anyone throw some inputs on this.
Regards,
Eswar

thanks for you response,I am sending plain text.I am facing formatting issuse .How to do formating for body of email .

PDF convertion for standard text

Similar Messages

Maybe you are looking for