PDF created in ArcView does not appear the same for all users

PDF documents created from ArcView 9.2 with the "warm front 2" symbol in it do not appear properly on some users computer displays when opened. I have a handful of users who when they view these specific PDF's the symbol appears as a series of 4's. We are using Acrobat Pro 7.0.9 and all systems are running Windows XP Pro. In the handful of users experiencing this problem we have both laptops and desktops.

Probably did not embed the fonts in the PDF. Change the settings file to print (or press) and try again.

Similar Messages

Problem with "Group By" in Views - Not Displaying the Same for All Users

We have an Announcements List with its only View being set up to group by a metadata category field. We've done this many times on other kinds of lists and never had a problem. But with this list, about half the users can see only the ungrouped
set of announcements, whereas others actually see the items within their groups.
Those with "View" rights only can't see the grouped items - but that appears to be a coincidence as I promoted them to the same rights as others who can see them correctly, and that did NOT solve the problem. Everyone is using the exact same browser.
Note: the users who do NOT see the groupings see only a single category entry that displays only the name of the category list (but not the names of the actual categories within the category list). All the announcements are grouped under that one
entry for those users. This display looks exactly like it would if the categories had been left blank when the original announcements were created. But the categories are NOT blank, and the rest of the users can see them just fine, and the announcements display
within their appropriate groups.
I can't find anything in the View, the List Settings, or the User Permissions to explain this. What could be causing it, and how can I fix it?

Browser settings are controlled by central IT and are all identical.
The only difference I can detect is the second set of users (that don't see the category options) have only Read rights, whereas those with Contribute (or above) rights can see the categories. It doesn't make
sense that permissions would affect this, but I can't come up with any other differences.
Microsoft will not allow me to upload images. it says I can't upload images until they have verified my account, but there is no clue as to how, if or when that might happen. If you can tell me how to fix that, I can provide samples.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

Workitem exists in SAP Inbox But does not appear in UWL for some users

Hi,
We have a peculiar problem with a standard workflow. This workflow is working fine in SAP Inbox and UWL in portal for most of the users. But sometimes, it does not send workitem to UWL for some users.
Any input of as why this happens?

Hi All,
I had experienced this type of problem as well, just to share it could be that the Identity of the Portal user misses a role which can be solved by any user assigning the identity in their identity management or it could also be the connection status of the UWL to the backend, there should be at least two connection statuses for workflow items to get into the UWL I could not recall it but I would post it here once I have the access to our system again.
Cheers,

Clicking the App Store item in the Finder menu does not open the application for one user account.

Although clicking the App Store icon in my Dock works, clicking the App Store . . . selection in the Finder menu doesn't do anything. I created a second user account and the Finder Menu worked as expected.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

I own a PDF EXPORT, but it does not appear on Acrobat DC

I own a PDF EXPORT, but it does not appear on Acrobat DC

We need to know what Mac you are using and what version of OS X, then we can get your question transferred to the correct forum.

A JE created from the AP Invoice does not include the project # on all trx

A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?

Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin

Eclipse environment does not appear the options "Web Dynpro Project"

Hi all,
I installed the SAP NetWeaver 7.1 Composition Environment SP03
But in my eclipse environment does not appear the options "Web Dynpro Project" and not "Development Component Project".
That is, I can not do a Web Dynpro project
I have to do some more configuration in eclipse, for example, carry some plugin?
How to do this, please help me
Thanks,
Vivian

Hi,
         I think you are suffering from the problem below.
Problem Statement:
No Webdynpro Perspective is Visible
only perspectives available are
    Debug
    Resource(default)
    Team Synchronizing
How to Solve:
There are many ways that this kind of error can occur.
1.   It may occur due to "improper installation of NWDS"
How to Check and Resolve :    Is NWDS is displayed in intalled list in Control panel? If 'yes' then it is properly installed. If 'No' then reinstallation is needed.
2. It may occur due to "installation of Skeleton alone"
How to Check:
                                  you can check if your installation includes Web Dynpro by selecting
Help->Software Updates->Manage Configurations.
When installing Developer studio 7.1 you only get the bare eclipse installation (Skeleton). You have to add web dynpro and all, after the initial install is complete.
The installer installs the kernel of the Developer Studio. The kernel contains Eclipse and a few SAP additions, but is not equipped with the SAP features necessary for the Composition Environment. In order to install the required SAP features you have to install the SAP features.
           How to Resolve:
Updating the NWDS software will resolve the problem.
Go to Help->Software Updates->Find and Install. This will install the default SAP plugins that came with your NWDS CE 7.1 setup source and also the additional updates that are needed.

HT204406 I have subscribed to match on iTunes and organized my music on my Mac Book. Why does it not appear the same way on my iPad

I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book. (and on my iPhone as well) Since it is in the cloud, why does it not appear the same way in all devices?

The purpose of iTunes match is to make your music library available to all of your devices anywhere. It will sync Playlists, but no other type of organization you may have made.
If you're having trouble, be sure you are logged into the same Apple ID on all devices but be sure to read this article and pay special attention to associating your devices with an Apple ID. There are important restrictions you should know about.

My ipad keeps restarting over and over again and even it does not appear the home screen

my ipad keeps restarting over and over again and even it does not appear the home screen...............................how can i fix this.................
`

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

The executible I build with the application builder does not function the same as my VI file.

I am using a USB 6008 device with the newest DAQmx drivers and Labview
8.2 to make analog voltage readings. Within my main VI I first
create a data folder in the same location as the VI using a property
node and then use case statements to call two sub VIs that create a
data file within the data folder and then collects data. When I use the
application builder to create an executible the resulting file does not
operate the same as the origional VI. The program appears to be
reacting to button presses on the GUI, but there is no indication that
the data folder is being created or that any measurements are buing
made. Are there any known issues that may account for this
anomily?
-Mike
Message Edited by TMBurleson on 10-16-2006 03:09 PM

Are you using the VI Path property, using a reference to the current VI?
I could be wrong, but if you're attempting to use a path relative to the current VI, I think that does indeed change in a built application. If your VI used to be C:\somewhere\foo.VI, then after building its path would actually be C:\somewhere\foo.EXE\foo.vi . Thus, if foo.VI used to try to make a folder like C:\somewhere\datafolder, the built application would be trying to make C:\somewhere\foo.EXE\datafolder , which wouldn't work.
This is sort of a shot in the dark, but does this sound like it might be the case?
EDIT: Dennis beat me to it.Message Edited by kehander on 10-16-2006 03:26 PM

Conversion does not look the same?

I converted a pdf file to a word document last night and the page does not look the same. It is a weekly time log and the lines are messed up and the font is not placed correctly. Is there any way to fix this?

Good day,
What you described is fairly common for conversions where the PDF file that's being converted to Word wasn't originally created from Word. The service does the best it can to interpret the font data as well as the formatting, but as that information is often not present within the code of the PDF file, sometimes the resulting Word document does not exactly resemble the PDF file.
Kind regards,
David
Acrobat Community Manager
Adobe Systems

OC4J: marshalling does not recreate the same data structure onthe client

Hi guys,
I am trying to use OC4J as an EJB container and have come across the following problem, which looks like a bug.
I have a value object method that returns an instance of ArrayList with references to other value objects of the same class. The value objects have references to other value objects. When this structure is marshalled across the network, we expect it to be recreated as is but that does not happen and instead objects get duplicated.
Suppose we have 2 value objects: ValueObject1 and ValueObject2. ValueObject1 references ValueObject2 via its private field and the ValueObject2 references ValueObject1. Both value objects are returned by our method in an ArrayList structure. Here is how it will look like (number after @ represents an address in memory):
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@2
Object[1].getValueObject[0] = com.cramer.test.SomeVO@1
We would expect to see the same (except exact addresses) after marshalling. Here is what we get instead:
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@3
Object[1].getValueObject[0] = com.cramer.test.SomeVO@4
It can be seen that objects get unnecessarily duplicated â“ the instance of the ValueObject1 referenced by the ValueObject2 is not the same now as the instance that is referenced by the ArrayList instance.
This does not only break referential integrity, structure and consistency of the data but dramatically increases the amount of information sent across the network. The problem was discovered when we found that a relatively small but complicated structure that gets serialized into a 142kb file requires about 20Mb of network communication. All this extra info is duplicated object instances.
I have created a small test case to demonstrate the problem and let you reproduce it.
Here is RMITestBean.java:
package com.cramer.test;
import javax.ejb.EJBObject;
import java.util.*;
public interface RMITestBean extends EJBObject
public ArrayList getSomeData(int testSize) throws java.rmi.RemoteException;
public byte[] getSomeDataInBytes(int testSize) throws java.rmi.RemoteException;
Here is RMITestBeanBean.java:
package com.cramer.test;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.util.*;
public class RMITestBeanBean implements SessionBean
private SessionContext context;
SomeVO someVO;
public void ejbCreate()
someVO = new SomeVO(0);
public void ejbActivate()
public void ejbPassivate()
public void ejbRemove()
public void setSessionContext(SessionContext ctx)
this.context = ctx;
public byte[] getSomeDataInBytes(int testSize)
ArrayList someData = getSomeData(testSize);
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println(" serialised output size: "+byteOutputStream.size());
byte[] bytes = byteOutputStream.toByteArray();
objectOutputStream.close();
byteOutputStream.close();
return bytes;
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return null;
public ArrayList getSomeData(int testSize)
// Create array of objects
ArrayList someData = new ArrayList();
for (int i=0; i<testSize; i++)
someData.add(new SomeVO(i));
// Interlink all the objects
for (int i=0; i<someData.size()-1; i++)
for (int j=i+1; j<someData.size(); j++)
((SomeVO)someData.get(i)).addValueObject((SomeVO)someData.get(j));
((SomeVO)someData.get(j)).addValueObject((SomeVO)someData.get(i));
// print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Check the serialised size of the structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return someData;
Here is RMITestBeanHome:
package com.cramer.test;
import javax.ejb.EJBHome;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
public interface RMITestBeanHome extends EJBHome
RMITestBean create() throws RemoteException, CreateException;
Here is ejb-jar.xml:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<session>
<description>Session Bean ( Stateful )</description>
<display-name>RMITestBean</display-name>
<ejb-name>RMITestBean</ejb-name>
<home>com.cramer.test.RMITestBeanHome</home>
<remote>com.cramer.test.RMITestBean</remote>
<ejb-class>com.cramer.test.RMITestBeanBean</ejb-class>
<session-type>Stateful</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
And finally the application that tests the bean:
package com.cramer.test;
import java.util.*;
import javax.rmi.*;
import javax.naming.*;
public class RMITestApplication
final static boolean HARDCODE_SERIALISATION = false;
final static int TEST_SIZE = 2;
public static void main(String[] args)
Hashtable props = new Hashtable();
props.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
props.put(Context.PROVIDER_URL, "ormi://lil8m:23792/alexei");
props.put(Context.SECURITY_PRINCIPAL, "admin");
props.put(Context.SECURITY_CREDENTIALS, "admin");
try {
// Get the JNDI initial context
InitialContext ctx = new InitialContext(props);
NamingEnumeration list = ctx.list("comp/env/ejb");
// Get a reference to the Home Object which we use to create the EJB Object
Object objJNDI = ctx.lookup("comp/env/ejb/RMITestBean");
// Now cast it to an InventoryHome object
RMITestBeanHome testBeanHome = (RMITestBeanHome)PortableRemoteObject.narrow(objJNDI,RMITestBeanHome.class);
// Create the Inventory remote interface
RMITestBean testBean = testBeanHome.create();
ArrayList someData = null;
if (!HARDCODE_SERIALISATION)
// ############################### Alternative 1 ##############################
// ## This relies on marshalling serialisation ##
someData = testBean.getSomeData(TEST_SIZE);
// ############################ End of Alternative 1 ##########################
} else
// ############################### Alternative 2 ##############################
// ## This gets a serialised byte stream and de-serialises it ##
byte[] bytes = testBean.getSomeDataInBytes(TEST_SIZE);
try {
java.io.ByteArrayInputStream byteInputStream = new java.io.ByteArrayInputStream(bytes);
java.io.ObjectInputStream objectInputStream = new java.io.ObjectInputStream(byteInputStream);
someData = (ArrayList)objectInputStream.readObject();
objectInputStream.close();
byteInputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
// ############################ End of Alternative 2 ##########################
// Print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Print out the size of the serialised structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
catch(Exception ex){
ex.printStackTrace(System.out);
The parameters you might be interested in playing with are HARDCODE_SERIALISATION and TEST_SIZE defined at the beginning of RMITestApplication.java. The HARDCODE_SERIALISATION is a flag that specifies whether Java serialisation should be used to pass the data across or we should rely on OC4J marshalling. TEST_SIZE defines the size of the object graph and the ArrayList structure. The bigger this size is the more dramatic effect you get from data duplication.
The test case outputs the structure both on the server and on the client and prints out the size of the serialised structure. That gives us sufficient comparison, as both structure and its size should be the same on the client and on the server.
The test case also demonstrates that the problem is specific to OC4J. The standard Java serialisation does not suffer the same flaw. However using the standard serialisation the way I did in the test case code is generally unacceptable as it breaks the transparency benefit and complicates interfaces.
To run the test case:
1) Modify provider URL parameter value on line 15 of the RMITestApplication.java for your environment.
2) Deploy the bean to the server.
4) Run RMITestApplication on a client PC.
5) Compare the outputs on the server and on the client.
I hope someone can reproduce the problem and give their opinion, and possibly point to the solution if there is one at the moment.
Cheers,
Alexei

Hi,
Eugene, wrong end user recovery. Alexey is referring to client desktop end user recovery which is entirely different.
Alexy - As noted in the previous post:
http://social.technet.microsoft.com/Forums/en-US/bc67c597-4379-4a8d-a5e0-cd4b26c85d91/dpm-2012-still-requires-put-end-users-into-local-admin-groups-for-the-purpose-of-end-user-data?forum=dataprotectionmanager
Each recovery point has users permisions tied to it, so it's not possible to retroacively give the users permissions. Implement the below and going forward all users can restore their own files.
This is a hands off solution to allow all users that use a machine to be able to restore their own files.
1) Make these two cmd files and save them in c:\temp
2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
<addperms.cmd>
Cmd.exe /v /c c:\temp\addreg.cmd
<addreg.cmd>
set users=
echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
REG IMPORT c:\temp\perms.reg
Del c:\temp\perms.reg
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

The report does not accept the value for apps.fnd_profile.value('USER_ID')

Hi,
I followed the below note and added a report to my SSHR menu.
How To Add A Report To A 11i Self Service Menu [ID 334847.1]
In my report , I have a condition in the query
and a.created_by =apps.fnd_profile.value('USER_ID')
When the report is submitted as a request , it works fine., however the same report when called from the self service page does not accept any value for apps.fnd_profile.value('USER_ID') .
Is there a workaround to handle this problem.
regards

hi,
I had already tried the option apps.fnd_global.USER_ID too.
However it does not accept the value for apps.fnd_global.USER_ID.
We want to call the reports in SSHR using oaf and at the same time the records that are pending for approval created by the employee should only be visible.
regards
Maya

PDF created in ArcView does not appear the same for all users

Similar Messages

Maybe you are looking for