PDF direction problems

Dear All,
I have a problem in some cases with arabic and english reports, i'm using IAS Rel2 , report builder 9.0.4,
the first case is i have this string "A/C No." but on PDF it's "No C/A."
the second case i have the date format with dd/mm/yyyy but on PDF runtime it will be yyyy/mm/dd.
Regards

Yes I did and got the error message i mentioned in my earlier email. I am using Adobe Reader 11 on Windows 8.1 if that helps

Similar Messages

Print a pdf directly to a printer to avoid repeated ripping of the same image

Hi,
I have created a 3.000 pages document from inDesign heaving its page the same color image as background and variable data. The document exported as pdf. Because of this method the file has very little size (about 3MB). The acrobat print engine take the image once and the resulted pdf does not using a copy in every page but share it (very cool).
The problem that I have is that when I print this pdf using the windows postscript drivers of my industrial printer (Xerox) then it takes very long time to ripp. I think that even if the pdf has only once the image the windows drivers does not understand this and send the image with every page.
I discussed this with someone and told me to print the pdf directly to the printer without the interference of printer's driver. As an example he mentioned that when we have a postscript file we do the same to print it (otherwise the postscript code will be printed) using a command line like lpr and put as an argument the IP of the printer (or using some tools for this like the free PrintFile but tghis is only for postscript files).
Could someone explain to me what he meant? And how is the syntax of the lpr?
Thanks in advance

Do you mean that the information for the label is huge on a letter or A4 page and you want to shrink it to the size of the label, or do you have a small region that you want to print to the label? Your work flow is not coming through at all and it is hard to help as a result.
If you have a label size print on a large page, then crop the page to the label print. Then go to the print menu, select the label paper, set shrink to fit, and print. At least I think that is what you are looking for.

Custom "Save as PDF" directly to a destination folder overwrites previously saved PDF files

Custom "Save as PDF" directly to a destination folder overwrites previously saved PDF files
As many of you will know, within Mac OSX it is possible to "print" any document off as a PDF. You simply prepare your document then invoke the "Print" command and in the resulting print dialog box, click the "PDF" button in the bottom left corner which spills out a menu with various options including "Save as PDF..." as shown in the image below:
Selecting the last option "Edit Menu" permits users to add specific folders to which a PDF of the document will be saved. As you will note from the image above, I have created a number of destinations such as "Bank Transfers" (for anything on screen in Safari I wish to preserve when using my on-line banking facility); "Bind" (which I use with an Automator workflow to consolidate many PDFs into one long document); "Officeworks" (for stuff I need to copy to a USB stick and have printed on on large plotters); "iPad" (for anything I need to put on my iPad through "iAnnotate" or "Documents") etc
The problem I have discovered is that with the introduction of Mountain Lion, PDFs that get saved directly to a destination folder get overwritten by later versions of PDFs that are produced from the same document. This is fine when working on a single document that you may want to have the latest print of a document but not so when you produce many different PDFs from the same browser window in Safari as you surf through a number of websites etc.
Prior to Mountain Lion, pervious versions were never over-written but rather preserved them with new versions having version number suffixes added e.g., untitled.pdf, followed by untitled1.pdf, untitled2.pdf, untitled3.pdf etc.
Does anyone else have this problem?
Does anyone have a solution to this problem? (other than a workaround like switching to Finder to rename or move files around)

The "Save to Web Receipts" bug existed for a long time - here's a MacOSXHints article offering a workaround in 2007. Here's another reference to it in 2009. Your contention that:
Prior to Mountain Lion, pervious [sic] versions were never over-written.
is, I'm afraid, wrong.
Apple fixed (worked around) that bug by using a .pdfworkflow, as I indicated. As I also indicated, this file can't be opened with Automator (or I just don't know how, which is no great surprise ). But it's the answer to your problems.
You can either wait for Apple to fix what is, admittedly, a huge bug in their PDF Services feature, or you can find a way of implementing the same fix they did for your own folders.
I should be doing the same, as I use PDF Services regularly, but I'm too lazy and have had too little success with Automator in general to give it a shot. You may have more success than I did.
Good luck

HTML to PDF conversion - problems with page-breaks and bookmarks

Hello,
My company is currently considering updating your software (from Acrobat 9 Pro to Acrobat XI Pro) and I’ve been assigned to research its features and make sure that it is a right fit for our goals. Basically we want to automate the whole process as much as possible and we want to create PDF directly from HTML. We’re providing a lot of content in HTML and we need a fast way to transfer it into PDF format. There are however some guidelines:
We want page-breaks in is this kind of documents, and thus - your app needs to be able to interpret HTML and put them where we want to;
We need to have bookmarks in there. Converter must be able to make them based on headlines from HTML source or afterwards, directly in PDF by using some auto-bookmarks feature;
There has to be table of content generated, based on HTML Link Tags if possible. Here’s sample of TOC structure that we have currently:
<A NAME="redirect">sample_text</A>
<A HREF="#redirect">sample_text</A>
Of course we can modify HTML in any way you want us to. The important thing for us is to make it work in PDF without the need to make a lot of manual changes after conversion.
I’ve been messing with Acrobat 9 Pro and reading some documentation that you have provided and I’m convinced that point 3 is not a problem. I’m aware that Acrobat 9 Pro is not having any difficulties with links in document and they work fine in PDF format that has been created from HTML.
Page-breaks on the other hand are bothering me. Your app is apparently ignoring every HTML code that the Internet is advising me to use to force page-break where I want. Honestly - I’ve tested like ten ways to make them and not even one was working. That’s why I’m asking for your help.
Another problematic subject for me is the bookmarks creation. I know that they are not a problem if I’m doing DOC to PDF conversion. Then I’m able to decide what header should be used as a curtain level of bookmarks and everything is working great at the end. However - with direct HTML to PDF conversion - I really don’t know how to generate bookmarks that are based on the source of the input document. Is there any way to make fully working 2 level bookmark tree in this case? Here’s an example of the structure we want at the end:
header1
header2
header2
header1
header1
header2
Could you please help me in finding the solutions? Just like I’ve mentioned - we can modify input HTML in any way, but in the end we would like to achieve our goals as quickly as possible.
Please excuse my English.
I am looking forward to your response,
Lucas

Frankly - we would like to avoid using Word. We are using it currently but there are long-term plans of improving whole conversion process, eliminate any mid-steps and automate as much as possible even though conversion is not going to be done unattended on a server. Thank you for your response, but I hope that maybe someone else would have any idea?

Unable to open PDF directly if user use Acrobat 8

Unable to open PDF directly if user use Acrobat 8.
We are facing some problems in our production site. When user click PDF icon, "FileDownload" windows pops up, but it only has "Save" or "Cancel" button, so user needs to download and save the file to open.
I tested the following scenario using
We have facing problem with this visions IE 6.0 Acrobat 8.0 and IE7.0 Acrobat 8.0.
Mozilla 2.0 acrobat 8.0 working fine. The pdf contents are embedding fine the browser window
Does anyone have any experience with something of this nature?

I must have missed the announcement - when did these forums change from Java language to IE/Adobe/Mozilla forums?

Open a pdf directly in IE11 (ACrobat Reader VI, Windows 8.1)

Hello!
We use Acrobat Reader, Windows 8.1 and IE11 in our company.
Unfortunately no user is able to open a pdf directly with IE11.
Instead of opening the pdf there is a popup which asked what to do with the pdf -open, save or saveas
I couldn't find a way to setup a default action (open)
In earlier versions it was possible to set the option "open in Browser".
This option is missing in AR11.
But why?
How can i set the deafult action?
thx

Hello together!
the problem was still there, so i decided to modify my search.
Fortunately i found a technet-post, which described our problem.
The following solution worked in our enviroment. PDF-documents will now be opened directly in IE11.
In Windows 7 (also Win8.1!!!!!), there is not the key AttachmentExecute by default. For this reason, Checkbox for "always ask before opening this type of file" is missing in the Download prompt window.
Actually, you can choose to add this key in your Registry by following txt, Copy them to notepad, then renamed as .reg file. After that, import to Registry.
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\AttachmentExecute\{0002DF01-0000-0000- C000-000000000046}]
" AcroPDF.PDF.1"=hex(0):
Many Thanks to Roger Lu from the technet community support!

Is it possible to insert a PDF directly(ie from Share Point) to email (Outlook) without saving it?

Is it possible to insert a PDF directly(ie from Share Point) to email (Outlook) without saving it?
I open several docs on Sharepoint that I need to send out immediately and waste a lot of time saving it to my computer and than opening an email and attaching it and than deleting the file bc I don't need it - its already on Sharepoint where I can access it.

I have the exact same problem. I used to could do it without saving until I upgraded to a new version. I cannot figure out how to send it without saving.

PDF splitting problem

Not sure if this is an Illustrator or Acrobat issue. Using Illustrator CS2, Acrobat Pro 9 and Quark Xpress 4 on Mac OSX 10.4.11.
Have a 2 color graphic created in illustrator, includes a blend and drop shadow, but a pretty basic design. Imported into Quark 4.0 and printed to PDF. The graphic seems to be split. There are a few rectangular shapes bounded by hairlines, only barely noticeable. When file was sent to client the problem was more noticeable from their end, with chunks of the graphic missing - these missing parts seem to correspond with where the hairlines are appearing on my pdf missing.
Fairly new to Acrobat 9 and CS2, so it could be something basic
Any suggestions greatly appreciated.

What if you open the PDF directly from Illustrator into Acrobat?
Jon

Forms 10g, how to send ReportServer generated PDF directly to client printr

Hi
We are implementing Forms 10g now, at we are facing quite a big problem - we haven't found a way how to send Report Server generated PDF directly to printer installed in clients computer.
Forms 10g and ReportServer are installed in the same machine and clients are accessing Forms10g through IE. Installing all the printers to the Forms10g server is not an option!
Is there any way of doing it?
Probably we could write a java bean that can read in the byte array and directly somehow send it to clients printer(java can read client printer list) but at this moment I have no idea how to accomplish it - haven't investigated it yet.
So if anyone has working software, please let me know how you achieved it.
Thanks!

may be this will help
Re: Printing Reports directly from to a printer via 10g forms (Linux)
DirectPrint Javabean and barcode fonts

PDF Export Problems

bei using interactive functions in inDesign CS5 and then exporting to pdf, I am able to see exactly everithing I wanted in AcrobatPro, but not in Adobe Reader. What can I do, so that anybody who uses Reader can see it too? Anybody knows?? Thanks

Re: PDF Export Problems
created by Jeffrey_Smith <http://forums.adobe.com/people/Jeffrey_Smith> in
InDesign - View the full discussion
<http://forums.adobe.com/message/4271659#4271659>
What is it that you can not see in Reader: button behavior, rollover effect,
hyperlink, etc. ?
Wow, I am impressed about the fast reaction:-)
The interactive function I am using (unfortunately in German inDesign) is
"button" > Action: by letting go (?). It's a file with some 100 pages and
some 500 links. Exported as pdf interactive...
The effect In AcrobatPro: when clicking on the thumbnail the original
picture shows in a separate window without closing the original file. After
closing the new window, I could continue in the multipage file...
This is not happening in Adobe Reader. It says: the link was not found, and
here and then, when shown in e new window, the multipage file is closed...
Hope this helps..
Thanks Jaro
PS
I did reply on the forum directly, but no success. There trying via mail.
Hope it works:-)

Error when printing a PDF direct from SAP archive

Hi together,
I try to print a PDF direct from SAP archive and I got the error ""C:\Program files\Adobe\Acrobat 7.0\reader\AcroRd.exe" /p /h" not found. In the internet I found several topics which describe this way to print a PDF without open the Acrobat Reader.
The customizing for document management (Local application) seems o.k. If I remove in the registry the parameters /h /p for print, Acrobat Reader will open and show the document if I use the print button in SAP.
Have anybody an idea what the reason is?
Thank you.
Regards
Thomas

The rundll32 error seems to have disappeared. Until this morning I had both this error and the rundll32. All other types of docs open fine. This one will open if saved to the desktop first, but not from Outlook.

Show report as PDF directly.

Hi BO teams,
   Can we show the report as PDF directly instead of showing a CR Viewer component?
Meaning I dont need to invoke the export feature of crystal report. If yes
a sample code will be greatly appreciated. Many thanks.
Best regards,
June

Hi,
You can export the report with out viewing using the viewer object but you need to use the export control to do this.
sample code as below.... Hope this will help you
ReportExportControl exportControl = new ReportExportControl();
exportControl.setParameterFields(getReportFields(map));
try {
      exportControl.setReportSource(getReportSource(map.get(REPORT_NAME)));
} catch (ReportSDKExceptionBase e) {
     e.printStackTrace();
ExportOptions exportOptions = new ExportOptions();
exportOptions.setExportFormatType(ReportExportFormat.PDF);
exportControl.setExportOptions(exportOptions);
exportControl.setDatabaseLogonInfos(getConnectDetails());
exportControl.setExportAsAttachment(true);
exportControl.processHttpRequest(request, response, session.getServletContext(), null);
exportControl.dispose();

Upload PDF directly to printer via Citrix from off-site computers

Is it possible to upload PDF documents directly to the newer HP printers, especially the business printers and copiers (MFDs)? We have HIPAA-containing data that home-based users must print at work, and therefore cannot be sent via the cloud.
Our current printer vendor supports uploading PDFs directly, which our users are using. The workflow involves printing via PDFCreator, then opening the web interface print tab of the device they are printing to and uploading, via a browse button, the PDF document. The connection is handled through our Citrix remote access servers, everything is encrypted, and all data stays out of the cloud.
Because HP's ePrint is in the cloud, we cannot submit HIPAA-containing data via that route.
If no current HP products have that capability, can it be added? I would think a firmware update to have an upload option would be very doable. It appears that the ability to print PDFs is already present via ePrint--this would only be another way to submit a print job.
Our current printer vendor's device functionality includes being able to upload and print other print-ready formats, including .PCL and .PS files, but we aren't using that capability currently. It would be nice to be able to upload .DOC/.DOCX formats directly.

Hey SPS64,
Thank you for participating in the HP Consumer Support Forums! The steps you desire are not going to be found on Consumer grade printers, but may be able to be found on some of the Enterprise level printers from HP. I would advise posting this question on the Enterprise printing boards where there are many experts who would be willing to assist with your question.
http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
Best of luck,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How can i set Adobe to open pdf from a secure website in the browser, it just pops up and asks to open save or download. we want it to just open the PDF directly in the browser with no popups, using IE 11

Hi,
We are running Internet explorer 11 with the latest version of Adobe Reader.
have found when users login to a secure website and it has pdf links on there, it doesnt open these pdf directly in the browser, it wants to save them and then open them.
is there anything we can change to allow them to be opened directly in the browser?
Thanks,
Cam

Hi campbellk19046717,
Please refer the KB doc link mentioned below if that might help:
Acrobat Help | Display PDF in browser | Acrobat, Reader XI
Let me know.
Regards,
Anubha

Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

Good day,
I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

Good day abrieb93050306,
I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
This will probably resolve your issue.
Let me know if you still experience any issue.
Regards,
Aadesh

PDF direction problems

Similar Messages

Maybe you are looking for