PDF display bug in Mail
This an iPad Air with latest software. When I get a PDF via mail and open the PDF I will sometimes get
a black screen. If one looks closer, one notices that the PDF reader did com op, but the first part
of the PDF visible on the screen is just black. If I scroll down, I can see the rest, but the first part
will remain black. If I zoom the document, the first (previously black part) will become visible,
as soon as I remove my hand it will jump back to the original size and turn black.
This is reproducible but depends on the document (i.e. some work and others don't). Sometimes not
all of the first visible part will be black bot only some rectangular areas.
Is this known. Is there a workaround?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
Similar Messages
-
[Bug Report] CR4E V2: Exported PDF displays Japanese characters incorrectly
We now plan to transport a legacy application from VB to Java with Crystal Reports for Eclipse. It is required to export report as PDF file, but result PDFs display Japanese characters incorrectly for field with some mostly used Japanese fonts (MS Gothic & Mincho).
Here is our sample Crystal Reports project: [download related resources here|http://sites.google.com/site/cr4eexportpdf/example-of-cr4e-export-pdf]
1. PDFExportSample.rpt located under ..\src contains fields with different Japanese fonts.
2. Run SampleViewerFrameClient#main(..) to open a Java Report Viewer:
a) At zoom rate 100%, everything is ok.
b) Change zoom rate to 200% or 50%, some fields in Japanese font collapse.
c) Export to PDF file,
* Fonts "MS Gothic & Mincho": both ASCII & Japanese characters failed.
* Fonts "Meiryo & HGKyokashotai": everything works well.
* Open PDF properties, you will see all fonts are embedded with built-in encoding.
* Interest to note that copy collapsed Japanese characters from Acrobat Reader, then
paste them into a Notepad window, Notepad will show the correct Japanese characters anyway.
It seems PDF export in CR4E mistaking to choose right typeface for Japanese characters
from some TTF file.
3. Open PDFExportSample.rpt in Crystal Report 2008 Designer (trial version), and export it as PDF.
The result PDF displays both ASCII & Japanese characters without any problem.
Test environment as below:
* Windows XP Professional SP3 (Japanese) with MS Office which including extra fonts (i.e. HGKyokashotai)
* Font version: MS Gothic, Mincho, Meiryo, all in Version 5.0
You can download MS Meiryo from Microsoft's Site:
http://www.microsoft.com/downloads/details.aspx?familyid=F7D758D2-46FF-4C55-92F2-69AE834AC928&displaylang=en)
* Eclipse 3.5.2
* Crystal Reports for Eclipse, V2, 12.2.207.r916
Can this problem be fixed? If yes how long will it take to release a patch?
We really looking forward to a solution before abandoning CR4E.
Thanks for any reply.I have created a [simple PDF file|http://sites.google.com/site/cr4eexportpdf/inside-the-pdf/simple.pdf?attredirects=0&d=1] exported from CR4E. It is expected to display "漢字" (or in unicode as "\u6F22\u5B57"), but instead being rendered in different ones of "殱塸" (in unicode as "\u6BB1\u5878").
Look inside into this simple PDF file (you can just open it with your favorite text editor), here is its page content:
8 0 obj
<</Filter [ /FlateDecode ] /Length 120>>
stream ... endstream
endobj
Decode this stream, we get:
/DeviceRGB cs
/DeviceRGB CS
q
1 0 0 1 0 841.7 cm
13 -13 569.2 -815.7 re W n
BT
1 0 0 1 25.75 -105.6 Tm <-- text position
0 Tr
/ttf0 10 Tf <-- apply font
0 0 0 sc
( !)Tj <-- show glyphs [20, 21], which index is to embedded TrueType font subset
ET
Q
The only embeded font subset is defined as:
9 0 obj /ttf0 endobj
10 0 obj /AAAAAA+MSGothic endobj
11 0 obj
<< /BaseFont /AAAAAA+MSGothic
/FirstChar 32
/FontDescriptor 13 0 R
/LastChar 33
/Subtype /TrueType
/ToUnicode 18 0 R <-- point to a CMap object
/Type /Font
/Widths 17 0 R >>
endobj
12 0 obj [ 0 -140 1000 859 ] endobj
13 0 obj
<< /Ascent 860
/CapHeight 1001
/Descent -141
/Flags 4
/FontBBox 12 0 R
/FontFile2 14 0 R <-- point to an embedded TrueType font subset
/FontName /AAAAAA+MSGothic
/ItalicAngle 0
/MissingWidth 1000
/StemV 0
/Type /FontDescriptor >>
endobj
The CMap object after decoded is:
18 0 obj
/CIDInit /ProcSet findresource begin 12 dict begin begincmap /CIDSystemInfo <<
/Registry (AAAAAB+MSGothic) /Ordering (UCS) /Supplement 0 >> def
/CMapName /AAAAAB+MSGothic def
1 begincodespacerange <20> <21> endcodespacerange
2 beginbfrange
<20> <20> <6f22> <-- "u6F22"
<21> <21> <5b57> <-- "u5B57"
endbfrange
endcmap CMapName currentdict /CMap defineresource pop end end
endobj
I can write out the embedded TrueType font subset (= "14 0 obj") to a file named "[embedded.ttc|http://sites.google.com/site/cr4eexportpdf/inside-the-pdf/embedded.ttf?attredirects=0&d=1]", which is really a tiny TrueType font file containing only the wrong typefaces for "漢" & "字". It seems everything OK except CR4E failed to choose right typefaces from the TrueType file (msgothic.ttc).
Is it any help? I am looking forward to any solution. -
Bug report: Mail sends messages with empty bodies
Over the last year, I have experienced a particularly irritating bug in Mail.app at least a dozen times. I finally have a good idea as to what causes it.
The problem involves long email messages (often with attachments) that end up being sent with blank bodies (and no attachments). Even the copy in the "Sent" folder ends up blank, and several minutes or hours of work vanishes into thin air, not to be seen ever again.
I finally realized that this bug only occurs when sending mail through our work SMTP server while outside the work firewall, and only as a result of a certain sequence of events. Here is what happens:
When we connect to our work SMTP server from outside the local network and without going through the VPN, the SMTP server requires password authentication. If the current SMTP selection in Mail.app is the one that does not require authentication, the SMTP server rejects the message. At that point, Mail.app opens the email I am trying to send and brings up a modal dialog that says "Cannot send message using the server xxx.xxx -- The server response was: xxx@xxx relaying prohibited. You should authenticate first." The dialog also presents a drop-down list of SMTP server choices. I choose the password-authenticated version of the server and then click on "Use Selected Server" to send the message.
This works almost all the time, but on occasion it ends up sending a blank message! If I have a long email, particularly with attachments such as PDFs that are rendered in the body of the message, it takes a few seconds for the mail message to be rendered underneath the modal dialog box. Since I am used to this STMP rejection behavior, sometimes I am too fast to choose another STMP server from the list and click on "Use Selected Server" before the mail message is rendered on screen! The result, invariably, is a blank email message that gets sent.
I guess what is happening is that when the STMP server rejects the message and hands it back to Mail.app, the message gets copied into a buffer in order to be displayed on screen. Selecting another server and resending it immediately (before the message is copied into the buffer completely) causes the message body to get trashed.
I hope that this description is adequate for Apple QA folks to replicate and isolate the problem (and hopefully fix it). One solution (although not the most elegant one) would be to disable the "Use Selected Server" action until the message is copied into the buffer and rendered on screen.This could be related to another bug reported here recently:
E-mail looses all images if mail server doesn't accept outgoing email...
You cannot count on Apple looking into this or even noticing it if you report it here, so I suggest you the same I suggested in the other thread, i.e. report it in one of the following places:
http://www.apple.com/macosx/feedback/
http://developer.apple.com/bugreporter/ -
Can not open all .pdf files in Yahoo Mail.
Three computers using Windows XP and Internet Explorer can open all .pdf files in Yahoo
Mail. The fourth and newest Computer with XP Pro, Internet Explorer, and the latest Adobe
Reader can only open some, but not all, .pdf files in Yahoo Mail. Nothing happens when
the window is clicked to open file. How can this be fixed?Adobe Reader isn't my favorite, but neither are smug and uninformed assertions about Preview. There are PDFs that render only squares and marks under Preview (http://apple.stackexchange.com/questions/24209/this-pdf-displays-with-question-m arks-instead-of-letters), which is a common problem in MS Windows Office generated PDFs, so you may actually need Adobe Reader for Mac.
If you need to use Adobe Reader (as I do), then it may depend on the filesystem type where you save your PDF. For example, our Macs are network homed. Saving to desktop produced the error reported above no matter whether I used Safari:Save As, or the PDF save icon.
However, when I saved to a local drive (such as /tmp), then it worked. I don't know why file system makes a difference, unless Adobe is doing something with extended attributes that doesn't get written correctly to some filesystems.
Hope this helps. -
How to open a pdf attachment in imac mail
I am unable to open a PDF attachment in Mac Mail. There is not a PDF Icon in the email message. Is there a setting that should be checked?
I have a new iMac (less than a month old) with Mountain Lion.
Help would be greatly appreciated. ThanksIt is an actual PDF that is an attachment to an email. There is not a link to click on to open the attachment.
The attachment is a statement that I normally open, then print..
What I am seeing on the monitor is the heading portion of the email with the statement image, all on one page..It prints exactly as seen on the screen.
I have checked my Mail>Preferences>Viewing Tab."Display remote images in HTML" messages is checked..
Thanks for the help. -
Spool no. data to PDF and then to mail
Hi all ,
My requirement is i have to display all the spool request no.'s for the particular user and from that user will select the particular spool no. . and that particular data has to convert into PDF and that PDF should go to mail id specified in selection screen.
now my prob. is when i am downloading the PDF on desktop it is opening with right data and when i am sending to mail id with the same internal table with PDF format , the file is corrupted and giving some error.
for ur reference here i am sending my code , please check and let me know .
thanks & regards,
Anil kumar .
TABLES: tsp01,
soextreci1.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-020.
SELECT-OPTIONS : so_date1 FOR sy-datum OBLIGATORY,
so_time1 FOR sy-uzeit,
so_name1 FOR sy-uname,
so_splno FOR tsp01-rqident.
so_email FOR soextreci1-receiver OBLIGATORY.
PARAMETER : so_email TYPE soextreci1-receiver OBLIGATORY.
SELECTION-SCREEN : END OF BLOCK b1.
DATA : l_addrnumber TYPE adr7-addrnumber,
l_persnumber TYPE adr7-persnumber,
l_mail TYPE adr6-smtp_addr.
DATA : BEGIN OF it_tsp01 OCCURS 0,
rqident TYPE tsp01-rqident,
rqowner TYPE tsp01-rqowner,
rqcretime TYPE tsp01-rqcretime,
rqclient TYPE tsp01-rqclient,
rqo1name TYPE tsp01-rqo1name,
END OF it_tsp01.
DATA : l_date_low TYPE char8,
l_date_high TYPE char8,
l_time_low TYPE char8,
l_time_high TYPE char8,
l_final_low TYPE char16,
l_final_high TYPE char16,
markfield VALUE ' '.
DATA : BEGIN OF l_final OCCURS 0,
sig TYPE c,
opt TYPE char2,
low TYPE char16,
high TYPE char16,
END OF l_final.
*PARAMETERS:
spoolno LIKE tsp01-rqident,
download AS CHECKBOX DEFAULT 'X',
DATA : p_file TYPE rlgrap-filename VALUE 'C:\temp\file.pdf'."#EC NOTEXT
DATA otf LIKE itcoo OCCURS 100 WITH HEADER LINE.
DATA cancel.
DATA pdf LIKE tline OCCURS 100 WITH HEADER LINE.
DATA it_pdf LIKE pdf OCCURS 0 WITH HEADER LINE.
DATA doctab LIKE docs OCCURS 1 WITH HEADER LINE.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
AT SELECTION-SCREEN OUTPUT.
SELECT SINGLE addrnumber
persnumber
FROM adr7
INTO (l_addrnumber,l_persnumber)
WHERE uname = sy-uname.
SELECT SINGLE smtp_addr
FROM adr6
INTO l_mail
WHERE addrnumber = l_addrnumber
AND persnumber = l_persnumber.
so_date1-sign = so_name1-sign = 'I'. "so_email-sign = 'I'.
so_date1-option = so_name1-option = 'BT'. "so_email-option = 'BT'.
so_date1-low = so_date1-high = sy-datum.
so_name1-low = so_name1-high = sy-uname.
so_email-low = so_email-high = l_mail.
APPEND : so_date1,so_name1.",so_email.
START-OF-SELECTION.
IF so_date1-low IS NOT INITIAL.
l_date_low = so_date1-low.
ENDIF.
IF so_date1-high IS NOT INITIAL.
l_date_high = so_date1-high.
ENDIF.
IF so_time1-low IS NOT INITIAL.
l_time_low = so_time1-low.
l_time_low+6(2) = '00'.
ENDIF.
IF so_time1-high IS NOT INITIAL.
l_time_high = so_time1-high.
l_time_high+6(2) = '00'.
ENDIF.
IF l_time_low IS NOT INITIAL.
CONCATENATE l_date_low l_time_low INTO l_final_low.
ELSE.
CONCATENATE l_date_low '00000000' INTO l_final_low.
ENDIF.
IF l_time_high IS NOT INITIAL .
IF so_date1-high IS NOT INITIAL.
CONCATENATE l_date_high l_time_high INTO l_final_high.
ENDIF.
ELSE.
CONCATENATE l_date_low '23595959' INTO l_final_high.
ENDIF.
l_final-sig = so_date1-sign.
l_final-opt = so_date1-option.
l_final-low = l_final_low.
l_final-high = l_final_high.
APPEND l_final.
CLEAR l_final.
SELECT rqident
rqowner
rqcretime
rqclient
rqo1name
FROM tsp01 INTO TABLE it_tsp01
WHERE rqcretime IN l_final
AND rqowner IN so_name1.
IF sy-subrc NE 0.
MESSAGE 'No data for the entered values' TYPE 'E'.
EXIT.
ENDIF.
CLEAR : so_name1,so_name1[],it_tsp01.
SORT it_tsp01 BY rqident.
LOOP AT it_tsp01.
WRITE : /1 sy-vline,
3 markfield AS CHECKBOX,
5(16) it_tsp01-rqident, 22 sy-vline,
23(10) it_tsp01-rqowner, 34 sy-vline,
35(16) it_tsp01-rqcretime, 52 sy-vline.
HIDE it_tsp01-rqident.
AT LAST.
WRITE : /1(52) sy-uline.
ENDAT.
ENDLOOP.
TOP-OF-PAGE.
WRITE: /1(52) sy-uline.
WRITE: /1 sy-vline,
5(16) 'Spool No.' COLOR COL_POSITIVE CENTERED , 22 sy-vline,
23(10) 'User' COLOR COL_POSITIVE CENTERED , 34 sy-vline,
35(16) 'Date' COLOR COL_POSITIVE CENTERED , 52 sy-vline.
WRITE: /1(52) sy-uline.
END-OF-SELECTION.
SET PF-STATUS '/BAY4/PDF'.
DATA : l_rqident TYPE tsp01-rqident,
l_count TYPE i VALUE '0'.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'PDF'.
CLEAR l_count.
DO.
CLEAR : markfield.
READ LINE sy-index FIELD VALUE markfield.
IF sy-subrc NE 0.
EXIT.
ENDIF.
CHECK markfield NE space.
IF l_count GT 0.
MESSAGE 'Please select only one check box' TYPE 'E'.
EXIT.
ENDIF.
l_rqident = it_tsp01-rqident.
l_count = l_count + 1.
ENDDO.
PERFORM get_pdf.
WHEN 'MAIL'.
CLEAR l_count.
DO.
CLEAR : markfield.
READ LINE sy-index FIELD VALUE markfield.
IF sy-subrc NE 0.
EXIT.
ENDIF.
CHECK markfield NE space.
IF l_count GT 0.
MESSAGE 'Please select only one check box' TYPE 'E'.
EXIT.
ENDIF.
l_rqident = it_tsp01-rqident.
l_count = l_count + 1.
ENDDO.
PERFORM get_pdf.
PERFORM send_mail.
ENDCASE.
*& Form get_pdf
text
--> p1 text
<-- p2 text
FORM get_pdf .
READ TABLE it_tsp01 WITH KEY rqident = l_rqident.
LOOP AT it_tsp01.
client = it_tsp01-rqclient.
name = it_tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
CHARCO =
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP =
SIZE =
STOTYP =
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
IF objtype(3) = 'OTF'.
is_otf = 'X'.
ELSE.
is_otf = space.
ENDIF.
IF is_otf = 'X'.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = l_rqident
no_dialog = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
pdf_bytecount = numbytes
pdf_spoolid = pdfspoolid
OTF_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
ELSE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = l_rqident
no_dialog = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
pdf_bytecount = numbytes
pdf_spoolid = pdfspoolid
LIST_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
ENDIF.
PERFORM download_w_ext(rstxpdft) TABLES pdf
USING p_file
'.pdf'
'BIN'
numbytes
cancel.
ENDFORM. " get_pdf
*& Form send_mail
text
--> p1 text
<-- p2 text
FORM send_mail .
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0 WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0 WITH HEADER LINE.
*DATA: PIT_ATTACH LIKE table of IT_ATTACH.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA : w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: a TYPE string,
t TYPE string.
a = 'FILE.PDF'.
t_object_header = a .
APPEND t_object_header.
DATA: p_email TYPE string.
CONSTANTS:
con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
LOOP AT pdf.
TRANSLATE pdf USING ' ~'.
CONCATENATE pdf-tdformat pdf-tdline INTO it_attach SEPARATED BY space.
APPEND it_attach.
CLEAR : it_attach,pdf.
ENDLOOP.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam,
p_attdescription LIKE ld_attdescription,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
p_sender_address LIKE ld_sender_address,
ld_sender_address_type LIKE soextreci1-adr_typ,
p_sender_addres_type LIKE ld_sender_address_type,
ld_receiver LIKE sy-subrc.
RANGES : ld_email FOR somlreci1-receiver OCCURS 0.
ld_email[] = so_email[].
append ld_email.
ld_email = so_email.
ld_mtitle = 'PDF file for the Spool no'.
ld_format = 'pdf'.
ld_attfilename = 'filename'.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = 'X'
AND
RETURN.
IF sy-subrc EQ 0.
MESSAGE 'PDF sent to specified mail id' TYPE 'I'.
LEAVE SCREEN.
ENDIF.Hi,
Try this program, it works for me perfectly:
REPORT Z_SENDFAX line-size 46 no standard page heading message-id so.
data g_list_content type solix_tab.
data g_text_content type soli_tab.
parameters:spool like sy-spono.
parameters:rec_fax type sadrfd-rec_fax.
parameters:title like sadrfd-rec_title.
parameters:name1 like sadrfd-rec_name1.
parameters:cover type c.
PARAMETERS: Zvbeln LIKE likp-vbeln.
start-of-selection.
perform create_text_content changing g_text_content.
perform create_list_content changing g_list_content.
perform send using g_text_content
g_list_content.
*& Form create_list_content
form create_list_content changing list_content type solix_tab.
perform get_list_from_spool changing list_content.
endform."create_list_content''
*& Form create_text_content''
form create_text_content changing text_content type soli_tab.
data:z_lin(200) type c.
append 'To,' to text_content.
concatenate 'To:' name1 into z_lin separated by space.
append z_lin to text_content.
concatenate 'End of delivery Notice for ' Zvbeln
into z_lin separated by space.
append z_lin to text_content.
convert the content from RAW to TXT''
CALL FUNCTION 'SO_RAW_TO_RTF'
TABLES
objcont_old = text_content
objcont_new = text_content
EXCEPTIONS
others = 0.
endform."create_text_content''
*& Form SEND''
Create the list-document and send it via FAX, Mail and RML''
form send using text_content type soli_tab
list_content type solix_tab.
data:z_lin(200) type c.
structures and internal tables for the send data''
data document_data type sodocchgi1.
data packing_list type table of sopcklsti1.
data receivers type table of somlreci1.
data contents_txt type soli_tab.
data contents_hex type solix_tab.
data packlist_wa type sopcklsti1.
data receiver_wa type somlreci1.
data packlist_counter type i.
data sent_to_all type sonv-flag.
data msg_ex(200) type c.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
main document''
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
document data contains information for the whole message''
document_data-obj_descr = 'Miscellaneous Delivery Notice'.
some text for the main document''
append 'Hi,' name1 to contents_txt.
concatenate 'To:' name1 into z_lin separated by space.
append z_lin to contents_txt.
concatenate 'Attached you will find the Delivery Notice for ' Zvbeln
into msg_ex separated by space.
append msg_ex to contents_txt.
append 'Attached you will find the Delivery Notice for ' Zvbeln to contents_txt.
packlist_counter = 1.
perform create_packlist_entry using contents_txt
'RAW'
changing packlist_wa
packlist_counter.
append packlist_wa to packing_list.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
add a text attachment of type TXT''
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
perform create_packlist_entry using text_content
'TXT'
changing packlist_wa
packlist_counter.
append packlist_wa to packing_list.
append lines of text_content to contents_txt.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
add the list attachment of type ALI''
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
packlist_counter = 1."because we will fill the hex table now''
perform create_packlist_entry using list_content
'ALI'
changing packlist_wa
packlist_counter.
append packlist_wa to packing_list.
append lines of list_content to contents_hex.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
fill recipients tables''
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
perform create_fax_recipient changing receiver_wa.
append receiver_wa to receivers.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
Send the document by calling the API1''
as of 6.10 either the flag 'commit_work' has to be set''
or a commit work statement has to be set somewhere after the call''
Sending won't work without this!''
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~''
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = sent_to_all
TABLES
packing_list = packing_list
contents_txt = contents_txt
contents_hex = contents_hex
receivers = receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
case sy-subrc.
when 0.
if sent_to_all is initial.
read table receivers index 1 into receiver_wa.
message i865 with receiver_wa-retrn_code.
else.
message s022.
endif.
when 1.
message i552.
when 2.
message i023 with document_data-obj_descr.
when 4.
message i471.
when others.
message i619.
endcase.
endform." SEND''
*& Form USE_SUBMIT''
<nowiki>* Use "submit <report> exporting list to memory"
form use_submit changing contents_hex type solix_tab.
data listobject type table of abaplist.
get the list object by calling the list in another report
F1 on submit gives more information
submit balvsd03 exporting list to memory and return.
import the list from memory and store it in table listobject
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
not_found = 1
others = 2.
if sy-subrc <> 0.
message e105 with 'LIST_FROM_MEMORY'.
endif.
free memory
CALL FUNCTION 'LIST_FREE_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
others = 1.
if sy-subrc <> 0.
message e105 with 'LIST_FREE_MEMORY'.
endif.
it's always necessary to compress the table.
SAPconnect will decompress it
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = listobject
out = contents_hex
EXCEPTIONS
compress_error = 1
others = 2.
if sy-subrc <> 0.
message e105 with 'TABLE_COMPRESS'.
endif.
endform." USE_SUBMIT
*& Form WRITE_A_LIST
Create a new list within this report.
form write_a_list changing contents_hex type solix_tab.
data listobject type table of abaplist.
perform write_list.
Save the list and store table listobject
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = sy-lsind
TABLES
listobject = listobject
EXCEPTIONS
list_index_invalid = 1.
if sy-subrc = 1.
message e105 with 'SAVE_LIST'.
endif.
It's always necessary to compress the table
SAPconnect will decompress it
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = listobject
out = contents_hex
EXCEPTIONS
compress_error = 1
others = 2.
if sy-subrc <> 0.
message e105 with 'TABLE_COMPRESS'.
endif.
endform." WRITE_A_LIST
*& Form GET_LIST_FROM_SPOOL
Get list from spool
form get_list_from_spool changing contents_hex type solix_tab.
data spool_number type rspoid.
data contents_bin type soli_tab.
data print_parameters type pri_params.
data valid type c.
write a list into spool
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_parameters = print_parameters
valid = valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
if sy-subrc <> 0.
message e105 with 'GET_PRINT_PARAMETERS'.
elseif valid is initial.
return.
endif.
new-page print on parameters print_parameters no dialog.
perform write_list.
new-page print off.
spool_number = spool.
DATA:REAL_TYPE LIKE SOODK-OBJTP.
DATA:BUFFER_PDF LIKE TLINE OCCURS 0 WITH HEADER LINE.
you can also send OTF documents from spool with this function
module. The importing parameter real_type gives you the doc type
that you have to give to the send interface. The parameter is not
used here
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = spool_number
desired_type = 'RAW'
IMPORTING
REAL_TYPE = REAL_TYPE
TABLES
buffer = contents_bin
BUFFER_PDF = BUFFER_PDF
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
others = 8.
*clear contents_bin[].
if sy-subrc <> 0.
message e105 with 'RSPO_RETURN_SPOOLJOB'.
endif.
CALL FUNCTION 'SO_RAW_TO_RTF'
TABLES
objcont_old = contents_bin
objcont_new = contents_bin
EXCEPTIONS
others = 0.
data:TRANSFER_BIN TYPE SX_BOOLEAN." occurs 0.
data:CONTENT_BIN TYPE SOLIX_TAB." occurs 0.
data:OBJHEAD TYPE SOLI_TAB.
data:LEN TYPE SO_OBJ_LEN.
*len = '255'.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PRT'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PRT'
devtype = 'POSTSCPT'
CHANGING
TRANSFER_BIN = TRANSFER_BIN
CONTENT_TXT = contents_bin
CONTENT_BIN = contents_hex
OBJHEAD = OBJHEAD
LEN = len.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
devtype = 'PRINTER'
CHANGING
TRANSFER_BIN = TRANSFER_BIN
CONTENT_TXT = contents_bin
CONTENT_BIN = contents_hex
OBJHEAD = OBJHEAD
LEN = len.
convert to hex table
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
ip_solitab = CONTENT_BIN
IMPORTING
ep_solixtab = contents_hex.
endform." GET_LIST_FROM_SPOOL
*& Form WRITE_LIST
Write a list of SAPconnect conversion rules
form write_list.
data lt_scarr type table of scarr.
data carr type scarr.
select * from scarr into table lt_scarr.
format color = 1.
uline at /1(46).
write: / sy-vline,
'CARRID', 10 sy-vline,
'CARRNAME', 35 sy-vline,
'CURRCODE', 46 sy-vline.
format color = 2.
uline at /1(46).
loop at lt_scarr into carr.
write: / sy-vline,
carr-carrid, 10 sy-vline,
carr-carrname, 35 sy-vline,
carr-currcode, 46 sy-vline.
endloop.
uline at /1(46).
new-line.
endform." WRITE_LIST
*& Form create_packlist_entry
text
form create_packlist_entry using contents type standard table
format type so_obj_tp
changing packlist_wa type sopcklsti1
packlist_counter type i.
data tab_lines type i.
clear packlist_wa.
DATA FORM2 TYPE so_obj_tp.
get the table length of the attachment
describe table contents lines tab_lines.
set binary flag for binary content to mark that this packlist entry
is meant for table contents_hex and not for contents_bin
FORM2 = FORMAT.
if format = 'ALI'.
FORM2 = 'PRT'.
FORM2 = 'PDF'.
packlist_wa-transf_bin = 'X'.
endif.
attchment's description and format
concatenate form2 'Document' into
packlist_wa-obj_descr separated by space.
packlist_wa-doc_type = form2.
describe start and length in contents_txt or contents_hex
which table is meant is decided by the transf_bin flag set above
packlist_wa-body_start = packlist_counter.
packlist_wa-body_num = tab_lines.
increase counter to have the starting line for the next attachment
packlist_counter = packlist_counter + tab_lines.
endform." create_packlist_entry
*& Form create_int_recipient
text
*form create_int_recipient changing receiver type somlreci1.
field-symbols <receiver> type c.
data recipient_int type sadrud.
clear receiver.
fill address type specific recipient structure
cast structure to generic receiver field
assign recipient_int to <receiver> casting.
receiver-receiver = <receiver>.
set address type for INT
receiver-rec_type = 'U'.
*endform."create_int_recipient
*& Form create_fax_recipient
text
form create_fax_recipient changing receiver type somlreci1.
field-symbols <receiver> type c.
data recipient_fax type sadrfd.
data name type soud3.
clear receiver.
name-sapnam = sy-uname.
CALL FUNCTION 'SO_NAME_CONVERT'
EXPORTING
name_in = name
IMPORTING
name_out = name
EXCEPTIONS
others = 1.
if sy-subrc <> 0.
name-adrname = sy-uname.
endif.
fill address type specific recipient structure
recipient_fax-rec_fax = rec_fax."'7152414031'.
recipient_fax-rec_state = 'US'.
recipient_fax-rec_title = title."'Mr.'.
recipient_fax-rec_name1 = name1."'Ytamar Fondeur'.
recipient_fax-send_nam = name-adrname.
recipient_fax-send_cover = cover.
recipient_fax-FORM_LANGU = sy-langu.
cast structure to generic receiver field
assign recipient_fax to <receiver> casting.
receiver-receiver = <receiver>.
set address type for FAX
receiver-rec_type = 'F'.
endform."create_fax_recipient
*& Form create_rml_recipient
text
form create_rml_recipient changing receiver type somlreci1.
field-symbols <receiver> type c.
data recipient_rml type sadr7d.
clear receiver.
fill address type specific recipient structure
recipient_rml-sdest = 'C11'.
recipient_rml-umand = '001'.
recipient_rml-uname = 'MYUSER'.
cast structure to generic receiver field
assign recipient_rml to <receiver> casting.
receiver-receiver = <receiver>.
set address type for RML
receiver-rec_type = 'R'.
endform."create_rml_recipient -
Some pdf attachments missing in mail 5.2
I fail to receive pdf attachments intermittently using Mail 5.2 running OS X 10.7.3 (Lion). When the attachments do not arrive, I see no paperclip in the attachments column. On a recent occasion, a colleague sent me three consecutive emails, each with 1-2 pdf files attached. The middle one (containing one pdf), shows no attachment in Mail. However, I know the attachment is there, because if I open it on my iPhone, I see the attachment. What's more, if I forward the email to myself from the iPhone, I can now see the attachment again. This has happened several times in the past as well. Any ideas?
I have the same problem, failing to receive pdf attachments intermittently using Mail 5.2 running OS X 10.7.3 (Lion), and not being counted among the attachments
Two times where I'm aware it happened, the sender had replied and included the attachments I had sent in my original message, and I'm wondering if those attachments somehow led to their own attachments not displaying and not even being counted in the e-mail window. "3 Attachments, 317 KB" displayed, but those were my three; clicking the "Save" drop-down menu listed only those 3 attachments of mine. In one case, I had them resend their attachments as a new e-mail, and that worked. Their 2 attachments totalled 941 KB, so Mail missed rather a lot by displaying just 317 KB. -
Smartform output to pdf and send through mail
Hi,
I am able to save the output of the smartform as pdf file and able to send the pdf as attachment in mail.
But the problems are -
1 - As i have set the field - 'X' TO ls_control_param-getotf.
I am unable to view the print preview of the billing document and no spool is getting displayed. I want to see the print preview and create a spool and also generate a pdf file.
2- I am using the FM SO_DOCUMENT_SEND_API1 to send the mail of the pdf file. But i am getting the message like
"Cannot extract the embedded font 'FranklinGothalicITCBook'. Some charactersmay not display or print correctly" followed by "An error exists on this page. Acrobat may not display the page correctly".
Pls help me in resolving the issues.
Thanks,
RajuHi
I was worked on similar type of requirement. For your reference, please check the below piece of code which i have developed for my requirement.
FORM ENTRY USING RETCODE
US_SCREEN.
*Check if Nast key is initial or not
IF NAST-OBJKY IS NOT INITIAL.
*if nast-objkey is not initial than we need to get the smartform name
*which is ZSF_PURCHASE_ORDER01
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = C_FORM
IMPORTING
FM_NAME = G_FNAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
*if sy-subrc ne 0 than we need to update the nast entry with error
IF SY-SUBRC <> 0.
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
*check if we need to take a print out
CLEAR W_CTRLOP.
IF SY-UCOMM = 'PREVOUTPUT'.
NAST-NACHA = '1'.
ENDIF.
OUTPUT TO PRINTER
IF NAST-NACHA = C_1. " Output to Printer
W_COMPOP-TDDEST = NAST-LDEST.
W_COMPOP-TDNEWID = 'X'.
W_COMPOP-TDIMMED = 'X'.
W_COMPOP-TDDELETE = 'X'.
W_COMPOP-TDLIFETIME = 1.
W_COMPOP-TDFINAL = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_CTRLOP-DEVICE = 'PRINTER'.
W_CTRLOP-PREVIEW = 'X'.
*Smartform is called and print program is done
CALL FUNCTION G_FNAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = ' '
WA_NAST = NAST
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
*if print program is successful we need to update the nast entry
IF SY-SUBRC EQ 0.
RETCODE = 0.
IF US_SCREEN EQ 'X'.
PERFORM NAST_PROTOCOL_UPDATE.
ELSEIF SY-SUBRC NE 0.
*if print program is not successful than we need to update the nast
*entry
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
ENDIF.
OUTPUT TO MAIL
ELSEIF NAST-NACHA = C_5. " External Mail
We need to get the smartform into OTF file format
W_CTRLOP-GETOTF = 'X'.
IF NAST-TCODE = 'ZLE'.
W_COMPOP-TDDEST = 'LOCL'.
ENDIF.
CALL FUNCTION G_FNAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = ' '
WA_NAST = NAST
IMPORTING
JOB_OUTPUT_INFO = WA_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
*update the nast entry accordingly
IF SY-SUBRC EQ 0.
RETCODE = 0.
IF US_SCREEN EQ 'X'.
PERFORM NAST_PROTOCOL_UPDATE.
ELSEIF SY-SUBRC NE 0.
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
ENDIF.
*convert the smartform data into OTF file
DATAB[] = WA_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 134
ARCHIVE_INDEX = ' '
ASCII_BIDI_VIS2LOG = 'X'
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = BINFILESIZE
TABLES
OTF = DATAB[]
LINES = PDFTAB[]
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5.
*if file conversion fails we need to update the nast entry
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
LINE_WIDTH_SRC = 134
LINE_WIDTH_DST = 255
TRANSFER_BIN = 'X'
TABLES
CONTENT_IN = PDFTAB[]
CONTENT_OUT = PDF[]
EXCEPTIONS
ERR_LINE_WIDTH_SRC_TOO_LONG = 1
ERR_LINE_WIDTH_DST_TOO_LONG = 2
ERR_CONV_FAILED = 3
OTHERS = 4.
*if conversion fails update the nast entry accordingly
IF SY-SUBRC <> 0.
RETCODE = 1.
PERFORM NAST_PROTOCOL_UPDATE.
EXIT.
ENDIF.
Hope it helps... -
How to correct bad PDF display of Excel 2007 graph-Adobe Pro X?
Just installed Adobe Acrobat Pro X; previously had Adobe Pro 8, which worked fine. Have Excel 2007 files with an Excel graph and a JPG image on the spreadsheet tab. Both the graph and the JPG are too big, are displaced, and hide spreadsheet data, when the Excel file is Saved As a PDF using Adobe Pro dialog or Excel dialog, or the Excel Plug-In to Create PDF. For some strange reason, printing to PDF works, although that is limiting. All of the settings are the same for the Adobe Printer as Adobe Pro settings. Changing them or going to default did not help. Just did the latest update; that did not help.
The graph and JPG are too large for the PDF page. Paper printing from Excel still works fine. Producing a PDF on another machine with Pro 8 still works fine. Could not find this problem discussed anywhere. Using XP, fully patched. This should not be a complicated process, nor a complex spreadsheet. What is going on?
ThanksRegardless of the method and Adobe product used to create the PDF, including the Excel tool button, the single common factor whether the PDF correctly displays a JPG or graph in the Excel file that is being done at anything other than 100% size is whether the Adobe Printer or a Physical Printer is selected as the default printer in the Windows Printers and Faxes-Settings. This is true even though the printer is not being used. I have created the same PDF using every method/product and the results are always the same, and only properly display when either the setting is 100% size or the system printer is selected as Adobe Printer. This is true only after installing Adobe X (8 was previously installed, and worked as expected).
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
>>> "Bill@VT" <[email protected]> 4/7/2012 7:21 AM >>>
Re: How to correct bad PDF display of Excel 2007 graph-Adobe Pro X? created by Bill@VT ( http://forums.adobe.com/people/Bill%40VT ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4319297#4319297 )
You say the settings for the printer work fine, but do not for PDF Maker (I am assuming this is what you meant). PDF Maker no longer uses the printer and the settings are independent. Check the settings for PDF Maker under the create PDF menu.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4319297#4319297
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4319297#4319297. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message. -
Unable to open PDFs in received e-mail (Outlook)?
Unable to open PDFs received in Outlook (Office for Mac 2011). Adobe XI message displayed says "There was an error opening this document. The file is damaged and could not be repaired." Same PDFs attached to same mail messages open fine on iPad or iPhone. What could be the problem?
ivone dos santos,
Do you see a message like this when you open one of your PDF documents?
Your PDF document is a special type of form called a "dynamic XFA form". The message is displayed when a dynamic content is not supported by a PDF viewer.
As far as I know, no PDF viewers for iOS and Android mobile devices support dynamic XFA forms. Here are the examples of the iOS apps that do not support dynamic XFA forms.
Adobe Reader for iOS
Mail
Safari
iBooks
The PDF preview feature in Dropbox and other apps
The message is trying to tell you to use the latest desktop version of Adobe Reader, not the mobile version of Adobe Reader. I agree that the sentence, "You can upgrade to the latest version of Adobe Reader...", is somewhat misleading. The message is baked into the dynamic XFA form that was authored by Adobe LiveCycle (desktop app) without regard for non-desktop apps (i.e. mobile apps). Upgrading to the latest version of Adobe Reader for iOS would not help in this case.
Currently, the only option to view and fill out dynamic XFA forms is to use the desktop version of Adobe Reader.
Sorry for the confusion. -
Send a remuneration statement (paystub) as a PDF attachment by e-mail
Hi,
Does anybody send to their employees remuneration statement (paystub) as a PDF attachment by e-mail?
Could you please share the method that you using for it and advice why you choose this method?
I need to analyse at least two options:
u2022 Sending standard SAP Remuneration FORM
u2022 Sending custom made Remuneration FORM (more relevant to my situation)
Thank you in advance,
YutahThank you Rohan,
It may work for standard SAP payslip form but still need to find out how to send it out by e-mail automatically after pay-run is done to a bunch of employees.
Is there any standard solution or I need to create custom program to do it?
Any idea about custom made payslip form.
Right now we create a text file which we send to third party for payslip printing and have a custom made report which reads this file if we need to display/print payslip in house. -
Can any one tell me how to attach a pdf file to the mail through workflow
I have a smart which i am able to convert it to a pdf file...now.. can any one tell me how to attach a pdf file to the mail through workflow
Hi,
To create the task for attachment
Use the BOR SELFITEM and method NOTES_APPEND.
The out come of this task contain a link called attachment with a clip attached. Clisk on that icon and choose the type of attachment u want . RAW , EXCEL , TXT , PDF... Then using the import icon u can attach the document u like.
But the TYPE : OBJ.
Similarly using NOTE_DISPLAY method u can display the documents u like.
In any work item u have the facility to attach any atttchment for further circulation .
Attchment @ WORKITEM
1.Click the workitem for which you want to create the attchment
2.Press create attachment
3. Add the attachment u like (PDF)
Reward points for useful answer.
Richard A -
PDFs do not e-mail as attachments but as main body text!
Whenever I attempt to send a PDF document by e-mail it forms part of the main body text rather than displaying as an attachment.
Answers please!When I attach a PDF to Apple Mail on Mountain Lion, it is an icon. When I send it to an iCloud mail destination, the attachment arrives and is presented as an icon, whether on OS X, or in IOS 6.
I suspect that the recipient's mail user agent is responsible for the full image .vs. icon behavior, and there is nothing you can do to prevent it. -
Send PDF Attachment to SAP Mail Inbox.
Dear all,
I have problem please help me out.
i have to create an PDF file with
my own data and that created PDF file
i have to send it to SAP mail inbox
(Transaction code : so01).hi sudheer,
Let the data be populated into ur itab ,
Now in the code just concentrate on
Perform fill structure.
the process u need to do is from ur layout convert from
itab o/p format itab>OTF/OTF->PDF .
see the function modules .
on execution of this a mail will be in ur outbox .
regards,
vijay.
tables : vbak.
type-pools:slis.
data: begin of it_t1 occurs 0,
vbeln like vbak-vbeln,
erdat like vbak-erdat,
ernam like vbak-ernam,
netwr like vbak-netwr,
waerk like vbak-waerk,
end of it_t1.
select-options : so_vbeln for vbak-vbeln.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
it_sort TYPE slis_t_sortinfo_alv,
it_listheader TYPE slis_t_listheader,
it_alvevent TYPE slis_t_event.
DATA : wa_fieldcat TYPE slis_fieldcat_alv,
w_pos TYPE i VALUE 1,
wa_listheader TYPE slis_listheader,
wa_alvevent TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
Data: it_outtab like it_t1 occurs 0 with header line.
DATA : MAILREC LIKE SOMLRECI1 occurs 0 WITH HEADER LINE,
MAILBIN LIKE SOLISTI1 occurs 0 WITH HEADER LINE,
MAILBIN2 LIKE SOLISTI1 occurs 0 WITH HEADER LINE,
MAILTXT LIKE SOLISTI1 occurs 0 WITH HEADER LINE,
MAILHEAD LIKE SOLISTI1 occurs 0 WITH HEADER LINE,
MAILSTRUC LIKE SOPCKLSTI1 occurs 0 WITH HEADER LINE,
MAILDATA LIKE SODOCCHGI1 occurs 0 WITH HEADER LINE.
DATA: BEGIN OF GT_OTF OCCURS 0.
INCLUDE STRUCTURE ITCOO .
DATA: END OF GT_OTF.
DATA: ITCPO LIKE ITCPO,
ITCPP LIKE ITCPP.
DATA: tlines type i,
len_in like SOOD-OBJLEN,
len_out like SOOD-OBJLEN.
data: gt_pdf like solisti1 occurs 0 with header line.
DATA: gt_otfdata LIKE SOLISTI1 occurs 0 WITH HEADER LINE.
CONSTANTS: c_formname_top_of_page TYPE slis_formname
VALUE 'F_TOP_OF_PAGE'.
select vbeln
erdat
ernam
netwr
waerk into corresponding fields of table
it_outtab from vbak where vbeln in so_vbeln.
loop at it_t1.
write:/ it_t1-vbeln,
it_t1-erdat,
it_t1-ernam,
it_t1-netwr,
it_t1-waerk.
endloop.
perform alv_disp.
*& Form alv_disp
text
--> p1 text
<-- p2 text
FORM alv_disp.
PERFORM build_fcat USING '1' 'VBELN' 'IT_OUTTAB' ' ' ' ' ' '
'SALESNO'.
PERFORM build_fcat USING '2' 'ERDAT' 'IT_OUTTAB' ' ' ' ' ' '
'CRTNDATE'.
PERFORM build_fcat USING '3' 'ERNAM' 'IT_OUTTAB' ' ' ' ' ' '
'CRNAME'.
PERFORM build_fcat USING '4' 'NETWR' 'IT_OUTTAB' ' ' ' ' ' '
'NETPRICE'.
PERFORM build_fcat USING '5' 'WAERK' 'IT_OUTTAB' ' ' ' ' ' '
'CURRENCY'.
***Top of Page Heading purpose " u can add the date and column over here
PERFORM buildtop USING it_listheader[].
perform top_of_page.
*------Sort The Catalog
PERFORM sort_cat TABLES it_outtab USING it_sort[].
*------Display Table In GRID
PERFORM disp_grid TABLES it_outtab[].
**For email stuff follow the perform
perform fill_struct.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = MAILDATA
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = MAILSTRUC
OBJECT_HEADER = MAILHEAD
CONTENTS_BIN = MAILBIN
CONTENTS_TXT = MAILTXT
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
RECEIVERS = MAILREC
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_disp
*& Form build_fcat
text
-->P_0104 text
-->P_0105 text
-->P_0106 text
-->P_0107 text
-->P_0108 text
-->P_0109 text
-->P_0110 text
FORM build_fcat USING value(col_pos)
value(fieldname)
value(tabname)
value(key)
value(no_zero)
value(do_sum)
value(reptext_ddic).
CLEAR wa_fieldcat.
wa_fieldcat-col_pos = col_pos.
wa_fieldcat-fieldname = fieldname.
wa_fieldcat-tabname = tabname.
wa_fieldcat-key = key.
wa_fieldcat-no_zero = no_zero.
wa_fieldcat-do_sum = do_sum.
wa_fieldcat-reptext_ddic = reptext_ddic.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. " build_fcat
*& Form Top_Of_Page
Top of page for Grid.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader
I_LOGO = 'MY_SAP_ENJOY'.
ENDFORM. "top_of_page
text
-->P_IT_LISTHEADER[] text
FORM buildtop USING IT_LISTHEADER type slis_t_listheader.
DATA : text(100) TYPE c.
CLEAR it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'H'.
wa_listheader-info = 'Sales Details' .
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = 'Demo'.
APPEND wa_listheader TO it_listheader.
*CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = it_listheader
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM. " Top_Of_Page
*& Form sort_cat
text
-->P_IT_OUTTAB text
-->P_IT_SORT[] text
FORM sort_cat TABLES IT_OUTTAB STRUCTURE IT_OUTTAB USING IT_SORT
TYPE
slis_t_sortinfo_alv.
CLEAR wa_sort.
wa_sort-fieldname = 'VBELN'.
wa_sort-tabname = 'IT_OUTTAB'.
wa_sort-spos = 1.
wa_sort-up = 'X'.
wa_sort-subtot = ' '.
APPEND wa_sort TO it_sort.
ENDFORM. " sort_cat
*& Form disp_grid
text
-->P_IT_OUTTAB[] text
FORM disp_grid TABLES IT_OUTTAB STRUCTURE IT_OUTTAB.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZEX2' "sy-repid
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
IT_FIELDCAT = IT_FIELDCAT
IT_SORT = IT_SORT
TABLES
T_OUTTAB = IT_OUTTAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " disp_grid
*& Form fill_struct
text
--> p1 text
<-- p2 text
FORM fill_struct.
Text
MOVE 'Hi vijay ' TO MAILTXT-LINE.
APPEND MAILTXT.
Data
MAILDATA-OBJ_NAME = 'Document'.
MAILDATA-OBJ_DESCR = 'E-maiL From vij'.
MAILDATA-OBJ_PRIO = '1'.
MAILDATA-DOC_SIZE = strlen( MAILTXT ).
Structure
MAILSTRUC-HEAD_START = 1.
MAILSTRUC-HEAD_NUM = 0.
MAILSTRUC-BODY_START = 1.
MAILSTRUC-BODY_NUM = 1.
mailstruc-obj_name = 'Vijay Simha'.
MAILSTRUC-DOC_TYPE = 'RAW'.
APPEND MAILSTRUC.
Receivers
**u can use ur mail id(s) overhere
MOVE '[email protected]' TO MAILREC-RECEIVER.
MAILREC-REC_TYPE = 'U'.
APPEND MAILREC.
CLEAR ITCPO.
ITCPO-TDGETOTF = 'X'.
***moving to the output/format of the attachment.
final pdf format in the mail attachemnt
LOOP AT it_outtab.
MOVE it_outtab-vbeln TO MAILBIN.
MOVE it_outtab-erdat TO MAILBIN+18.
MOVE it_outtab-ernam TO MAILBIN+40.
MOVE it_outtab-netwr TO MAILBIN+70.
MOVE it_outtab-waerk TO MAILBIN+78.
APPEND MAILBIN.
CLEAR MAILBIN.
ENDLOOP.
**convert the scrap to otf.
CALL FUNCTION 'SX_OBJECT_CONVERT_SCR_OTF'
EXPORTING
format_src = 'RAW'
format_dst = 'OTF'
devtype = 'POSTSCPT'
funcpara = ' '
len_in = LEN_IN
IMPORTING
LEN_OUT = LEN_OUT
tables
content_in = MAILBIN
content_out = MAILBIN2
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH MAILBIN.
CONVERT OTF to PDF
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
DEVTYPE = 'POSTSCPT'
FUNCPARA =
LEN_IN = LEN_IN
IMPORTING
LEN_OUT = LEN_OUT
TABLES
CONTENT_IN = MAILBIN2
CONTENT_OUT = MAILBIN
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH MAILBIN2.
DESCRIBE TABLE MAILBIN LINES TLINES.
Structure
MAILSTRUC-HEAD_START = 1.
MAILSTRUC-HEAD_NUM = 1.
MAILSTRUC-BODY_START = 1.
MAILSTRUC-BODY_NUM = TLINES.
MAILSTRUC-TRANSF_BIN = 'X'.
MAILSTRUC-DOC_TYPE = 'PDF'.
MAILSTRUC-DOC_TYPE = 'XLS'.
mailstruc-obj_name = 'Vijay.S.Reddy'.
MAILSTRUC-DOC_SIZE = tlines * 255.
APPEND MAILSTRUC.
ENDFORM. " fill_struct -
Bug in Mail: Plain-Text | Rich-Text-Mails
Hi,
just found a bug in Mail (Mac OS X 10.6.2):
I am using a faxservice-provider, which sends my PDF-files to the transmitted fax-number.
This stopped working a few weeks ago, the recipients of my faxe just get blank pages.
I talked to the provider and they told me, that I was sending "Multi-Part-HTML"-mails, so their fax-software just sends the first part of the mail (some blank lines) and not the attached PDF-file.
So I checked a few thing and found the following bug:
Mail is set up to send mails only as "plain-text"-mails.
But if i send an email via the print-dialog ("send PDF per Mail") Mail creates a Rich-Text-mail. This also happens when using the "send PDF via Mail button" in Adobe Reader.
The created Mail is NOT a plain-text-mail!
Saving a PDF-file to the desktop and dragging the file to the Mail-Icon in the dock creates a "Plain-Text-File".
So you need to check the format of the Mail in the "Format-Menu". If you change the format at this place to "Plain-Text" everything is working fine.
Something in this Automator-workflow-script is working wrong. This workflow just has the order to create a new Mail with the PDF as attachment, so I can't change anything their. But the error must be founded in this script/workflow.
SvenAnd it's only a Gmail issue, not in, for example, Google Docs.
Maybe you are looking for
-
How do i move a video file from the theater to the library for more editing? New version of iMovie.
How do I move a video file from theater to the library for additional editing in iMovie. It is a new iMac so i guess i have the newest version of iMovie.
-
Transaction code for bill release
hi all, help me in finding of the transaction code for bill release thanks..
-
Web Galleries from before MobileMe missing from iPhoto
All of my web galleries from before the MobileMe upgrade are missing from the iPhoto left panel. They all show up online at gallery.mac.com and gallery.me.com and in iPhoto under Preferences>Web Gallery>"Albums you published as. The one gallery creat
-
Single Sign On with FDF Toolkits
Hi all, We are deploying an application using JSP + Struts + Oracle Toplink in Oracle AS 10g. We get the data from Oracle DB and fill to PDF report files using FDF Toolkit. Everything is fine util we decide to use Single Sign On (SSO)in Oracle AS 10g
-
Embedding Applet into Webpages
I have created applets in Jbuilder 8 associated with a client. When the first Client applet (ClientUDP) runs it sends information to the server and opens a new panel. When I embedded the applets into a Webpage the information is not being sent and th