Pdf doc showing lots of lines when viewed via tablet/ipad & mobile

I create a weekly newsletter for our local District Councillors. This is done in Word using tables, and then Adobe Acrobat Pro 9 to convert to a pdf. When viewed on our website, this is perfect. However, when viewed via a tablet or mobile, lots of lines have appeared in the document. This spoils the whole look of the newsletter. More of our Councillors are using tablets rather then desktop pcs now so this is becoming a real issue for me.
Can anyone advise if an upgrade to more recent version would solve this problem?
Thanks.

When viewed on ipads, its on the web browser - Safari, but some Councillors have Google Nexus, so via the Google browser. The lines appear on both types of tablets.
But the lines are also there when the pdf is opened as an attachment, so its something that's happening in the creation of the pdf....... stuck on this one... run out of ideas.

Similar Messages

  • Acrobat portfolio pdf wrapper lost when viewed in tablets (ipad,android)

    Hello,
    Is there a way to keep the acrobat portfolio pdf wrapper when you view it in a tablet?. I just can see the list of pdf´s but loose the nice wrapping.
    Thanks for your advice,
    Paloma

    The Portfolio navigators in a PDF are written in Flash, which does not work on the iPad, and which Adobe has recently stopped developing for Android. So we will not be able to add support for PDF Portfolio nagivators in the future. We may be able to make a nicer way to list the documents than we currently do, however.

  • Thin dark line appearing on site when viewed on the ipad and iphone iso 7

    When viewed on the iPad my site shows a thin vertical dark gray/black line at the edge of a div.container. It use to appear all the way around the div but I took care of that with height: 100%. When zoomed in 500% it disappears. I've found it can be eliminated by configuring the viewport for mobile and tablet devices. The problem is if I do that my horizontal scroll stops working. I've also tried my best with the suggestion from other websites to use a -3px margin and 3px transparent border. Any help here? Is this the right forum for this kind of question? Why did this begin to happen after iOS 7?? Any chance Apple will correct something like this? I don't appear to be the only person with this problem. Any help would be kind. Cheers!

    Can you print using Airprint instead?  
    --About Apple AirPrint--
    Some websites use encryption, especially in situations where credit card information is available.  You may want to save the page as a PDF first and then try to print it using ePrint.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Photo Stream issue.  Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone.  How can this be?

    Photo Stream issue.  Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone.  How can this be?  Tried shut down on all devices, reboot and the results are the same.

    Photo Stream issue.  Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone.  How can this be?  Tried shut down on all devices, reboot and the results are the same.

  • Formatting of emails on iphone 5 not correct yet the emails look normal when viewed via my laptop.  The sentences on my iphone email continue on the next line when there is still space on the current line.

    The formatting of emails on my iphone 5 don't display properly yet they are correct when viewed via my laptop.  Using a gmail account on my iphone/laptop.  On my iphone the sentences break in unusual spots and continue on the next line.  Why is this and how can I fix this issue?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Also consider deleting and reinstalling the Mail Account in question.

  • There is no way to see who is on line when using facebook with iPad 2

    There is no way to see who is on line when using facebook with iPad 2 why is that?

    I'm guessing you mean for FB Chat? Try the app Friendly.

  • Why does text show differently (vertical alignment) when viewed on a PC than on a Mac?

    The text shows misaligned (different) when viewed on different platforms (Mac or PC)
    The Menu section on this website ~> Menu
    Is there a way around this or a fix it. I was trying to look at the code in Dreamweaver and I did see some weird (>Span<) tags, I'm wondering if it might have to do with it.
    The goal is to align the right side (prices) perfectly. I even had to do the 'tracking' individually to every line. It does work, depending on what platform I'm working on, if I work and publish from a Mac, it would look fine no matter what browser I use, but when viewed on a PC the text gets misaligned. The same happens if I work and publish from a PC, it would show misaligned on a Mac.
    Hope there is a reasonable explanation for this.
    - Thank you,
    Ricardo

    The primary cause of the misalignment is the fact the text is using a "Web Safe" font. A "web safe" font is not a single font. Rather it's a list/stack of fonts for the site visitor's browser to try until it finds one that's available the visitor's computer. That means on one computer the text is in one font (i.e. Arial) and on another computer it's another (i.e. Helvetica) with the subsequent fallout caused by the varying character widths between the two fonts. The best way to reduce this variation between site viewers is to use a Web Font (either an Edge Web Font or a Self-Hosted Web Font).
    The alignment still won't be entirely consistent across browsers (or even versions of browsers), because each browser has it's own text layout engine and the engines do sometime change, but the variation will be radically reduced.

  • We uploaded a pdf to our web site but when viewed in Modzilla items are boxed and masked. Is there a way to make a pdf that is friendly to all browsers?

    When viewed in Safari and other browsers the pdf looks like it was intended. In Modzilla there are shaded boxes covering headlines and artwork. Makes it look like a jumble. Here is a link
    http://www.needlepointnow.com/wordpresstest/wp-content/uploads/NN_NWSLTR-0713.pdf
    I'm using Firefox 22.0

    Hello,
    Try looking at this article: https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them
    When you select "Use adobe acrobat in firefox" The problem goes away.
    Hope this helps :)

  • Images rotated when viewed on ipods/ipads

    Some images on ecommerce site are rotated 90 degrees when viewed on ipods and ipads.  The site is http://ladiesdesignerfashions.co.uk and its not just images on the slider on the home page but also images on product pages.  The images all appear to be set up correctly and I can't see why they are being rotated.

    Hi Jim,
    Could you please mention the models and OS versions of the devices that render the page with issues?

  • The photo book review pdf file is fully smudged and there are many horizontal lines all over the pictures. the book looks absolutely ok , but the pdf is showing all problems. also when i uploaded the book, it was successful, but got an error message later

    I created a book on I photo and uploaded it yesterday. it was all ok and the order was accepted. However i got an error message today. The book looks perfect on I Photo, when i do a preview, the PDF file is totally smudged and there are 100s of horizontal lines all over the photos. Also the coloures are bleeding all over.
    what can be the case and how can i resolve this.
    samir

    if the book looks good order while in safe mode - then reboot into normal mode
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    Apple will stand behind the order if it does not match your preview
    LN

  • Photoshop Elements 6 - PDF slide show won't run when email is opened

    I have created a slide show in Photoshop Elements 6 as a PDF file and sent it to myself as a trial run. Although I have selected the 'loop' option the show does not run automatically when the email attachement is opened as I believe it should. Any suggestions gratefully received. Thanks.

    It comes to something when I have to answer my own question!  However I have to admit I did have a little help from an earlier question which was thrown up by a search I did! It seems that when a PDF show is emailed and the recipient is asked whether the show should be opened in full screen or not; the answer should be 'yes' in order for the show to start automatically.
    If the recipient answers 'no' the show stays stuck on the first slide. Hope this help anyone else who may have the same problem.

  • AME Exported Videos show transparency differently than when viewed in Premiere Pro!

    This is kind of hard to explain but basically AME does not seem to treat 99% opaque as 99%...instead the exported file looks more like 90-95% opaque. If you have 2 clips (contrasting clips are easier to notice) on top of each other in Premiere and the top clip is at 99% opaque and the clip beneath it is at 100%, in Premiere you can hardly see the bottom clip, if at all. At 99%, that's how it should be. Just barely peeking through the top clip...
    BUT...
    If you export that clip using AME, the resulting clip will look completely different and it looks more like you had the top clip set at 90-95%. The lower clip is MUCH more visible. There is not "barely peeking through" like you see on Premiere. It appears that AME does not handle transparency well. For example if you cross dissolve two clips. It looks fine in Premiere but export it out to Bluray/DVD, etc. and all of a sudden, sometimes the beginnings and ends of the clip abruptly clip on or off as they fade into the clip. Again, it's like they go from 5% to 95% but miss out on the subtle start of 1-5% and the subtle ending of 95-99%.
    There is a thread about this in the Premiere section but I figured I'd toss it here since it seems Premiere handles/shows the transparency perfectly, but the issue arises when it's exported. To really define the point see the following clip that another user posted in that thread I just mentioned. Notice how the cross dissolves abruptly start and end sometimes. I noticed this in my exported videos too because I use LOTS of cross dissolves. It's easier to notice on more contrasted clips, but I think this illustrates the issue really well.
    https://vimeo.com/14536285
    Again, I just edited a project that had 2 clips stacked on top of each other and I accidentally had the top clip at 99%. I didn't even notice it in Premiere. You really cannot see the bottom layer peeking through...well, barely. But it's really subtle which makes sense because the top layer is at 99%. But on my exported Bluray/DVD...holy cow, it's VERY noticable! Almost as if the top clip were at 90%, not 99 (no exaggeration).
    I don't see a BUG Report for Adobe Media Encoder so I submitted a bug report in Premiere Pro.
    Can any one (staff preferably) address this issue please?

    Thanks for the response Todd. Is there a way to get around this GPU vs. CPU thing you mentioned? If not, is there a way to export from Premiere (to DVD/Bluray/Vimeo H.264) without using Adobe Media Encoder or export somehow so that dissolves and opacity changes are handled the same way that Premiere handles them so that the exported video doesn't look suddenly different? (I'm on a 2011 iMac with 16gb RAM and the AMD Radeon 6970M Graphics Processor) Basically, am I screwed and there's no current way having these issues with transparency that I mentioned above?
    Here, by the way, is the thread I mentioned that has to do with cross dissolves. I figured it was just an issue with that specific transition until I just now did this export with a 99% opaque clip on top of another clip and the resulting export looks more like an 85-90% opaque clip.
    http://forums.adobe.com/thread/898211?tstart=0
    Thanks Todd!

  • Why doesn't my E4200 wireless router show all attached devices when viewing the DHCP Client table?

    I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results.
    Other than a factory reset, any suggestions to get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago? Thanks!

    barrysegal wrote:
    I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results.
    Other than a factory reset, any suggestions to get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago? Thanks!
    It is strongly recommended that you upgrade the firmware to a smart wifi, which may resolve lot of bugs. You can also download the firmware here:
    E4200v2 Linksys Smart Wi-Fi Firmware11/19/2012
    Ver.2.1.39.145204
    Download
    18.3 MB

  • Why do some PDF's show whats under layers when opening?

    Hi,
    I work in ID 5.0.2. I distill my brochure to PDF. This is to keep the file size small for emailing and Web uploads. I have many text boxes and frames layered on certain revised sections of the document, my question: when we open the PDF in the office or on the Web, the brochure opens fine, however, we have a client that when he opens the same file, can see the contents which was covered with frames when he first opens it.
    Why does this happen, are there settings I should be addressing when I distill the brochure?
    Thank you in advance for your feedback.
    Barb

    When printing (which is what you do when you create PDF via distillation of PostScript) or when exporting PDF, all page content, even that which is completely "covered" by other content, is output. No attempt is made to optimize to eliminate output of objects that won't "show through." Thus, all the "old stuff" you are covering over is indeed in the resultant PDF file, regardless of how you produce it.
    Whether or not that content "shows" when being displayed depends very much on the particular PDF reader being used but more so, on the "power" (processor speed, amount of memory, etc.) of the system on which the PDF file is being displayed. Adobe Reader and Acrobat display whatever is provided in the file, including what is covered over. Thus, for a very complex page combined with not enough system power, you might see underlying content.
    The solution is to eliminate old, obsolete material from your InDesign document itself or put such material on non-printing layers.
    - Dov

  • PDF files showing some ascii characters when tried to open in adobe reader.

    Hi Good day.
    Please help. Our business counter part is sending pdf files. But when we tried to open it using adobe pdf reader x, there
    are some ascii charters that shown.
    Any suggestion is highly appreciated.
    Thanks,
    Daryll

    Hello Osprey,
    If you are using Windows, you have to right-click a .pdf file, then click on "open with", here you can choose with which program the PDF files will be automatically opened.
    Another solution is to go in your control panel, then in "Default Programs", you'll be able to do the same. You can refer to [http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7 this article] .

Maybe you are looking for