Pdf document on custom template and CSS

There was a small pdf document on CSS and templates in the turial section of APEX. Anyone know where is this?
George

Raizel wrote:
> In article <e4ovcd$eei$[email protected]>,
> "billugs" <[email protected]> wrote:
>
>> It seems that my template and css style are still
not showing up on my page,
>> I
>> uploaded both and I am out of ideas. Does anyone see
a problem that I can
>> fix?
>> <a target=_blank class=ftalternatingbarlinklarge
>> href="
http://www.personalizedspanish.com">http://www.personalizedspanish.com</
>> a>
>
> Can't help but ask -- why do you post your URLs as <a
target=_blank
> class=ftalternatingbarlinklarge
>> href="
http://www.personalizedspanish.com">http://www.personalizedspanish.com</
>> a>
>
> instead of just the URL?
Raizel: it's a problem with the forum and how stuff from
there gets
posted to the newsgroup. Per a recent post by Murray, the
Adobe team
are working on the problem. It's driving us all crazy.
Bonnie in California
kroko at
pixelplum dot com
http://www.theanimalrescuesite.com/cgi-bin/WebObjects/CTDSites.woa

Similar Messages

I have Pages 09. I have created custom templates and want to delete them. How do I delete a template I have created in Pages 09?

I have Pages 09. I have created custom templates and want to delete them. How do I delete a template I have created in Pages 09?

Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The door to the user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your users Library will appear about halfway down the list.

In adobe reader app on iPad, I have a PDF document that added notes and comments to. Once I left the document and returned to it, the notes and comments were gone. Where are they? I clicked "save" and "done" buttons after I entered text.

In adobe reader app on iPad, I have a PDF document that added notes and comments to. Once I left the document and returned to it, the notes and comments were gone. Where are they? I clicked "save" and "done" buttons after I entered text.

The application auto-saves your input when you close the document. If you left the document, as you state, the notes/comments should have been saved and should have been visible the next time you opened the document with the Mobile Reader (note that if you are opening the document with another app such as Apple's built in PDF Viewer, things like notes/comments may not be visible). Also note that if you are doing an Open In... from another app (like Dropbox), the version of the document in Dropbox does not update; only the version of the document in the Mobile Reader is updated.
Would it be possible to send a video of the problem you are encountering to [email protected] so that we can try to help?

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Script stops calculating...

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Although I am using the same script as the fields above in the columm, the script eventually stops calculating and I can't figure out why. Is there a limit of how many calculation scripts you can enter? I will attempt to attach my pdf as soon as I figure out how. Thanks.

For e31 :
var e30 = +getField("e30").value ;
var c31 = +getField("c31").value ;
if ( (e30 !== 0) && (c31 !== 0) ) event.value = e30 + c31 ;
else event.value = "";
for e32 :
var e31 = +getField("e31").value ;
var c32 = +getField("c32").value ;
if ( (e31 !== 0) && (c32 !== 0) ) event.value = e31 + c32 ;
else event.value = "";
for e33 :
var e32 = +getField("e32").value ;
var c33 = +getField("c33").value ;
if ( (e32 !== 0) && (c33 !== 0) ) event.value = e32 + c33 ;
else event.value = "";
Java console doesn't show any error... That's why I am wondering if it's not a limitation issue... or memory issue, because they are maybe too many rows or something....
The c value is not calculated.

Keeping custom templates and configurations on different drive

What I'm trying to do is keep one set of DVDSP layouts/templates/etc on a partition that all of our editors/graphics artists can access instead of adding 8gb or more on each station. I figured out how to link each station to the stock palette elements, using the preferences, but I didn't see a way to let DVDSP know that the configurations folder has been moved to a new partition. And in terms of custom templates, where are those normally saved? In the same folder as the stock templates? I'm unsure where to point DVDSP to set the custom elements. It's default is /Users/drive/Library/Application Support/Final Cut Studio/DVD Studio Pro. I see that DVDSP wants to save custom templates in the user folder library and the general templates in the general library, but what if I want both on a non-local drive? Can I simply create two folders (templates/custom templates) and make sure that our editors save to the custom folder when using DVDSP?
And lastly, will the custom configurations stay linked if I move the configurations folder to the new location on the shared media partition?
Hope this makes sense,
Steve

Steve
Look in DVDSP Preferences > Destinations > Show: Palette Elements. You'll see the location destination of stock and custom elements.
Hope that helps !
Alberto

Trouble using Custom Template and Saving Resulting Document. Help!

I created a Custom Template in Numbers '09. When I go hit "New from Template Chooser", there it is. I've tried entering info directly into the template, as well as duplicating it and entering info in the duplicated document. I can enter the info just fine, but.... Either way, when I'm done I do not have an option to Save, Save As or anything like that. I only see "Save As Template".....but it's already a perfectly good template. I don't want to Save As Template and create another template!!!. I want a named document saved, using the great template I already put together. Is this a problem? What's up? Why can't I do this???? Please help!

I'm on an iMac running 10.7.5. (Afraid to go further because I have FInal Cut Pro 7 and I'm very attached to it....I'm afraid to upgrade my OS and have FCP not work! I'm a pro and not so willing to go to FCP 10). Anyway, I'm on an iMac 3.06 GHz Intel Core 4 GB, 1333 MHz RAM.
I'm running Numbers ''09 and don't have 13, so it's an 09 template entering 09 info. It's perfect. I run webinars and it contains all of the status for media and every detail of any upcoming webinar production. My goal is to open the template, enter the info, and save it with the name of the webinar client. Then open again, enter for another client, save, etc.
It's just 09 all the way through. It says I can Save a Version or Save as Template.
Should I open a template and then Duplicate so it's a fresh document? I do that sometimes in hopes of seeing an option to SAVE AS. Sometimes I open and Don't Duplicate, but just use the template. Either way I see no way of saving the document with the specific information for the client. I don't want to Save As Template! Who wants hundreds of templates running around that are all virtually the same except for the info entered within it.
Am I missing the boat here?

Include custom javascript and css in uix page

Hello
I got a UIX page based on the pageLayout template and i wanted to include some custom things (css, js) inside the resulting html header like this:
<document>
<metaContainer>

<head title="mypage"/>
<html:link rel="stylesheet" type="text/css" href="http://someotherserver.com/generateStyle?pCSSType=loc"/>
<html:link rel="stylesheet" type="text/css" href="http://someotherserver.com/generateStyle?pCSSType=sys"/>
<script source="customScript.js"><contents></contents></script>
</metaContainer>
<contents>
<body>
Unfortunatly only ONE thing from within "metaContainer" gets included in the final html file. Is there a way to include everything from within "metacontainer"?
Thanks for your help,
Philipp Stecher

I think metacontainer is a named child, and like all named children it can only have one node.
Does this work?
<document>
<metaContainer>

<head title="mypage">
<contents>
<html:link rel="stylesheet" type="text/css" href="http://someotherserver.com/generateStyle?pCSSType=loc"/>
<html:link rel="stylesheet" type="text/css" href="http://someotherserver.com/generateStyle?pCSSType=sys"/>
<script source="customScript.js"><contents></contents></script>
</contents>
</head>
</metaContainer>

Can I select a rectangle in pdf document, identify the bounds, and then retrieve the text with vba?

I am using MS Access 2010 VBA and acrobat X, and AcroExchg. I can manipulate and search pdf documents without difficulty. I would like to programmatically capture the text in a rectangle that I have drawn on the document with a mouse. It appears that If I can obtain the bounding rectangle that I could use AcroExchg.PDTextSelect to retrieve the text. Is there a way to retrieve the coordinates of a mouse drawn rectangle in a pdf document. In other words the equivalent of select, copy and later paste the text into another document?
Message was edited by: jgm835
I have reviewed posts from the adobe forum that indicate that obtaining the coordinates from a user drawn selection are not available through automation with AcroExch, but that function would be available .through a plug in. Unless there is information to the contrary I will look to using menu commands in Acrobat

hi Bruce,
1. It sounds like what you need is to set the starting version number since your revision number increments in whole numbers, it would match up to SharePoint once the starting version number is set. You can potentially create a new custom field in the
library to manually track the version of the uploaded PDF document, but this might not match up with SharePoint's own version number and could get confusing. Another possibility is to upload dummy versions of the PDF document until the SP version
matches with the revision version and then delete these dummy versions.
2. When you upload the PDF document again into the library, it should prompt you to see if you want to replace the existing. If you proceed with the upload, it should replace and increment the SharePoint version number.
Please Mark Answered if my reply solves your problem. Thanks!
Jeff Thai
Technical Solutions Architect, AvePoint
http://www.AvePoint.com

HTMLEditorKit, Custom Tags and CSS???

I have an editor that will allow the user to insert merge fields. The document is in HTML and the editor supports basic document styling (bold, italics, etc).
For the merge fields I would like to use either a custom tag or a generic tag like span. Unfortunately, HTMLEditorKit only supports HTML 3.2 (which does not contain the span tag). How can I create a custom tag called "merge"?
Once I've created my custom tag, will the Cascading Style Sheet support in Java allow something like "merge {color: red}"?
Any help of suggestions would be greatly appreciated!
-- John

Hi John,
I'm trying to do the same thing (an editor for document containing merge fields...)
For your first problem, I used the var tag which is not very used but exists in HTML 3.2 !
And yes: HTMLDocument support CSS
Since June, I think you've finded a solution
If you success in creating a custom tag, please explain to me how do you make...
my e-mail is [email protected]
Thanks
Luc

Generate PDF documents from a template

We need a solution for the following scenario soon.
We need to create documents off of a template. The template is a pdf document with place holders in the text
For example: Assuming that the following is the text in the template I am talking about
Lorem ipsum dolor sit amet, $FIRSTNAME consectetur adipiscing elit. Sed risus orci, consectetur at malesuada euismod, $LASTNAME hendrerit ut turpis. Donec ullamcorper egestas condimentum. Ut eu nisi lacus.
We will create documents off of the above template by replacing $FIRSTNAME and $LASTNAME. The text needs to adjust as needed. In short, we don't want to use fixed fields for the text to be replaced.
Can this be done? How?

You will need to use form fields. You may be able to use adjustible size form fields in Designer. You might try to ask in the Designer forum for help.

HT5557 I want to download a PDF document full of charts and graphics. Pages won't load it. Will ibooks?

I have loaded Pages software on my ipad.
I received a PDF document via email as an attachment which I wanted to save. It was a small document, but with lots of graphics, the ipad offered me no no option to store in Pages.
What app could I download which the ipad would give as an option for storage from an email. Would ibooks do?
I already have winzip, but that didn't show as an option.
Any advice would be welcome. Thank you.

Welcome to the Apple Community.
Yes iBooks will organise and display pdfs.

Difficulties with templates and CSS in DW CS3

I'm having difficulty with CS3 and templates.
I started a new site. I created an HTML file (with CSS for
some formatting - colors and margins) and made a template from the
HTML file, creating one editable region (plus the default two of
the page title and the additional area in the header). I then
created my site HTML files from this new template. When I tried
updating the template, I got an error that I had nested editable
regions in the HTML files. I checked the template, and I don't. I
checked the HTML files and I did see two </body> tags at the
end.
I started over. I updated my starting file and made a new
template, overwriting my old one. I created new files from the new
template. Although the HTML files display fine in the browsers,
when I try to view them in Design View, this round DW doesn't
render them with the CSS, and it did the first time.
What's going on, and can I get it to stop?
Thanks!

I use File>New...>Page from Template, select the
template, go to editable region, add my content, then save the
result as an HTML file. Same as I've done lots of times. The Update
page when template changes checkbox is checked.
quote:
Originally posted by:
Newsgroup User
> I then created my site HTML files from this new template
How? FILE | Save As...?
Or FILE | New from template > Template name > Create?
> What's going on, and can I get it to stop?
Let's see the template page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixlor" <[email protected]> wrote in
message
news:g4jn3o$r21$[email protected]..
> I'm having difficulty with CS3 and templates.
>
> I started a new site. I created an HTML file (with CSS
for some
> formatting -
> colors and margins) and made a template from the HTML
file, creating one
> editable region (plus the default two of the page title
and the additional
> area
> in the header). I then created my site HTML files from
this new template.
> When
> I tried updating the template, I got an error that I had
nested editable
> regions in the HTML files. I checked the template, and I
don't. I checked
> the
> HTML files and I did see two </body> tags at the
end.
>
> I started over. I updated my starting file and made a
new template,
> overwriting my old one. I created new files from the new
template.
> Although the
> HTML files display fine in the browsers, when I try to
view them in Design
> View, this round DW doesn't render them with the CSS,
and it did the first
> time.
>
> What's going on, and can I get it to stop?
>
> Thanks!
>
>

I have secured PDF documents to prevent printing and saving the document. Why PDF plugin built into Firefox allows you to skip the security?

I am using PDFfactory to secure the PDF documents in my company. Despite this, users can open the document in Firefox and print, and save it locally. This is unacceptable because of the ISO standards process in my company. Please help ASAP.

''dzuniek [[#question-1046197|said]]''
<blockquote>
I am using PDFfactory to secure the PDF documents in my company. Despite this, users can open the document in Firefox and print, and save it locally. This is unacceptable because of the ISO standards process in my company. Please help ASAP.
</blockquote>
I think the first course of action would be to try securing with a different authoring program (if you have access to one) and seeing if you have the same problem.
As for the downloading and printing side of it, even with a protected PDF, anyone with the intent and a little knowledge will be able to download it. Or screenshot each page in their viewer.
One way to prevent them getting a usable print is to create a solid annotation field across each page of the document. It will be invisible whilst just being viewed but when printed the annotation field will cover everything, thereby producing a blank page.
Is it fair to ask whether a pdf is the best way of presenting information that you do not want them to download and subsequently print, seeing as that is exactly the reason PDF's exist?

Making custom templates and packaging them.

I have done several DVD's for clients/parents of thier childs soccer team videos. I normally make a custom menu for them. My question is, if i wanted to make this template and save it to give to someone else to use is there a way to do it. I guess it would be like making one to sell, but i am not selling it:) If anyone knows of a tutorial or anything that can help me i would appreciate it greatly. I am thinking about making generic templates fo several sports.

Hi Zack,
My guess would be if you do these in Photoshop, Live Type or Motion (as I do) give them these plus all associated files. If you have save these in DVD SP they are in Library>application Support>DVD SP>Templates. Hope this helps.
Jeff
Dual G4 1 GIG, G4 1.25 Laptop Macbook Pro 2.0 Mac OS X (10.4.7)

Setup Customer Templates and Alerting

We are currently have over 75 Oracle 10.2.0.4 test servers, with agents installed and reporting back to our OMS repository. We have been asked to start monitoring tablespace thresholds so that we don't run into outspace issues. What I have done is create a custom monitoring template and pushed it via the agents to the db servers. What I would like to do is remove all the standard oracle alerting, and only have the monitoring template and have it email or page our oncall when needed.
Jim

hi,
Maybe a better approach would have been to look at one of the standard grid control jobs, database availability and critical states. create your own rule as a copy of this, remove all the metrics you do not want. Edit the rule as the SYSTEM or SYSMAN user of grid control. Then make the rule public and then when you log in as a none SYSTEM/SYSMAN user just subscribe youreself to that rule to recive email alerts. This way you keep all the standard rule in tact.
regards
Alan

Pdf document on custom template and CSS

Similar Messages

Maybe you are looking for