PDF document print in duplex

Hey,
we have done followig:
- via the use of the Adobe Lifecycle designer we have designed a template for the creation of PDF documents. These document are put on a spool in order to print.
In the design we define the document attrubute 'Duplex print'
But, in the propoertie of the generated pdf document the propoerty stays 'Simplex'
Can someone help me in order to set the propoery on DUPLEX in the generated pdf document.
PS we do not use interactive forms.
Thanks a lot
Erwin

Hey,
we have done followig:
- via the use of the Adobe Lifecycle designer we have designed a template for the creation of PDF documents. These document are put on a spool in order to print.
In the design we define the document attrubute 'Duplex print'
But, in the propoertie of the generated pdf document the property DuplexMode stays 'Simplex'
Can someone help me in order to set the property on DUPLEX in the generated pdf document.
PS we do not use interactive forms.
Thanks a lot
Erwin

Similar Messages

Relative hyperlinks in pdf documents printed from visio 2007

Hello to all. The problem we are trying to solve is to maintain relative hyperlinks that were created in visio 2007 when we publish or print a pdf document. The pdf document that we printed is written in adobe reader 9, and it maintains the hyperlinks but as absolute ones and we required the hyperlinks to maintain as relatives. The idea is to distribute the pdf document with its hyperlinks and the documents that are linked to it in different computers that are not in the same network. The documents that we are trying to link are pdf, word and excel 2007 documents. The operating system we use is Microsoft vista home premium. Does anyone know how to maintain relative hyperlinks in a pdf document printed from visio 2007? Thanks in advance!

Bernd Alheit, thanks for your answer. We print the pdf document from visio 2007 and then we read it in adobe reader 9. The relative hyperlinks work fine in visio 2007, but they change to absolute ones in the pdf document.

"AcroRd32.exe /t" print a PDF document ( print only, no need to open )

I'm using the following command to print a PDF document:
"D:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe" /t "D:\R104-20071025165656.pdf" "\\192.168.0.4\hp" "hp LaserJet 1000" "\\192.168.0.4\hp"
Now it works fine! But I have more request:
I want a command that only send the file to printer and no need to open the PDF file on local system.
So anybody can help me?
Thanks in advance!

Dear Pedja,
My program is a desktop application, no a web application. It's not the same as you. And hope the following codes can help you :)
private void exportReportToPrinter(JasperPrint jasperPrint,int copyNum, String printerName, MediaSizeName mediaSizeName) throws Exception
// create the print service exporter so that we can print to a named
// printer
JRPrintServiceExporter exporter = new JRPrintServiceExporter();
// set the report to print
exporter.setParameter(JRPrintServiceExporterParameter.JASPER_PRINT, jasperPrint);
// tell the exporter to print 1 copy on A4 paper
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(new Copies(copyNum));
aset.add(mediaSizeName);
exporter.setParameter(JRPrintServiceExporterParameter.PRINT_REQUEST_ATTRIBUTE_SET, aset);
// let the exporter know which printer we want to print on
PrintServiceAttributeSet serviceAttributeSet = new HashPrintServiceAttributeSet();
serviceAttributeSet.add(new PrinterName(printerName, null));
exporter.setParameter(JRPrintServiceExporterParameter.PRINT_SERVICE_ATTRIBUTE_SET, serviceAttributeSet);
// print it
exporter.exportReport();
Muiz

PDF Documents Print in SAP

Hello Everybody,
I have PDF documents maintained in DMS and assigned to a material.
When a production order is created I have to print the PDF from DMS automatically.
Can someone tell me how to do that? What ABAP code is to be written to do that. Please help.
Thanks,
Sneha Singh.

Hi,
Refer to the following links.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6e455275-0e01-0010-2596-9c55c7ad897b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do
hope it helps.
Regards
Rajesh Kumar

CV01N - Attached PDF document printing through programmatically

Hi all
My requirement is to print PDF document which is attached through CV01N transaction programmatically. I searched all the ways. Still I didn't get it.
Kindly help me to achive PDF document printout programmatically.
Thanks in advance.
Thanks and regards
Selva

Hi Selva,
What kind of document it is? SMARTFORM , ADOBEFORM? If any of them is true there is a FM associated with each of them hence you can use that do print these. You can pass you own print parameters in the interface of these forms.
Second option check in which table the attachment get's stored get the same in binary format, and convert it into PDF, using some standard FM, Check SCMS* in SE37 that will help.
Best Regards,
Tapodipta Khan.

Barcode and PDF document printing in SAP MII

Hi All,
I am using SAP MII 15.0, one of my requirement is to print the Barcode and PDF file automatically.
I have came across the link below which tells to print the label
http://scn.sap.com/community/manufacturing/mii/blog/2014/08/17/industrial-label-printing-with-mii
In the above document, I can send only the string as a message in the PCo query CALL SEND(address=’127.0.0.1’, port=’20000’, message=’Hello World’);
Is that possible to send the document to the printer?
I am using the PDF action block.Can any one tell me how to print the document automatically?
Also, if my printer is connected to client, how it can be printed from client PC?
Regards
G.P

Hi chris,
I have to do via SAP MII and their is no other option.
In the above document, I can send only the string as a message in the PCo query
CALL SEND(address=’127.0.0.1’, port=’20000’, message=’Hello World’);
Is that possible to send the document from MII?
Is there any command like below for pushing the document to the printer so that it will be useful?
CALL SEND(address=’127.0.0.1’, port=’20000’, message=’Hello World’);
Also please let me know any idea of printer used, which will help ?
Regards
G.P

Printing multiple page PDF document, printer won't cut between pages.

I'm using a large format printer, an Epson Stylus Pro 9600, and trying to print from a PDF. It prints fine, but prints as one continuous roll, instead of cutting between pages. I've gone through all of the Epson driver options, as well as options on the printer itself to try and get it to auto cut between pages, and it still won't. So I'm wondering if there's an option in Acrobat that I'm missing? Has anyone encountered this issue, or know where to look for the option I must be missing?

Print them separately then.
I don't think there is a solution that fits all (if "fit to Printable area" isn't good for you).

Printing pdf documents too large acrobat pro 10.1.12 and OS 10.9.5

Using my Acrobat pro 10.1.12 and IMac OS 10.9.5, all my pdf documents print about 10 - 15% too large and run off page even though they are standard size documents and print fine using my Mac Air OS 10.8 and Acrobat Pro 10.1.1. The "shrink" and "Fit" settings are ineffective and I don't think they should be necessary anyway since these are standard size documents. Please help!!! THANK YOU

Correctn. My problem came from firefox. Once I changed page setup under the file heading, it worked fine. Seems the new install of adobe somehow changed the setting in firefox to 150%.

A pdf document created in cs5 cannot be printed in duplex on a pc without cs5 or adobe reader pro

Hi!
there is a "normal" cs5 created pdf document.
the installed cs5 pc -> i can print in duplex on every printer, without cs5 installed duplex printing not possible.
I am searching for a solution to print the pdf document in duplex mode on every printer, but only with the latest freeware version adobe xi 11.0.3.
(If i install adobe cs4 on a pc it is possible to print the document in duplex mode on a hp3525 printer, but duplex is not possible on a ricoh printer for example mpc5502.)
I cant upload the file, because its bigger than 2 mb. (5mb)
Is there anybody out there for help.
If you need the file, i´ll send 2 u.
thx

Yep, it definitely is a complicated workflow... But I'm not really sure of any other way to get from the 34" wide pattern to the home-sewing version which is split into pages and has alignment marks and whatnot. I'm very much an amateur that has figured it out as I went
I went through the page in the photo pretty thoroughly with the layer panel and I couldn't find any mystery lines... But I did find something interesting; when I click on any of the pattern lines, it shows the whole line of the pattern piece, which extends well past the edge of the artboard. So when I'm printing the poster-sized PDF to 7.5x10 pages, it's keeping all the anchor points of a line even if only a small piece of that is on the actual page.
Does this help? I've included the page in the photo as well http://www.putlocker.com/file/DADB4759DBB860D8
Thanks again to everyone!
Also, should I be keeping all the files I'm editing as .ai files and then only exporting to PDF for the very final product? I was doing that at first, but then using .pdf for the whole process didn't seem to make any difference.

How to print a PDF document in duplex mode using command prompt?

I want to print a pdf document in DUPLEX mode by command prompt.Already tried with /p and /t.

Hello Ram,
Please see this link - http://www.coolutils.com/Print-PDF-duplex-cmd
~Deepak

Is it possible to give each page within one pdf document a specific set of print settings?

I have a complex document (catalogue) that requires printing. There are several different printer settings required and each one is specific to each page within the document. For instance pg 1 is single sided in colour, page 2-3 is duplexed in b&w, page 3-8 is duplexed in colour, etc.... Is it possible to give each page within the pdf document a given set of print settings and then print the entire document as a whole?

Hi jennyskop
I assume that is not feasible ...You need to give the print command again and select the respective pages and their settings !

How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
When I clicked the Save button it showed the page that I scanned and showed 1/1. On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
Not to mention HP's Customer Support is useless!
I'd appreciate any help I can get with this problem.
Thanks,
Mark

Hi BH,
I see your diagram. I just scanned something. The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram. The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram. I can't see the plus sign because it is not there.
I tried re-installing the software and drivers as you suggested but that did not have any affect.
Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
I've noticed that on HP's support forum web page there is only 1 solved request for assistance. That doesn't give me much confidence in HP.
Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
Thanks,
Mark

How can I automatically close a PDF document after it is done printing?

Hello all,
To cut to the chase I am using the System Exec.VI to open a PDF with Adobe Reader 8.0 and printing the document. I can do this without a problem. The problem is I would like to have this window close automatically when it is done printing. I have seen on the web that the switch to make this happen is /t, but for some reason my pdf doc is not closing. My command line looks like this
"C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe" /t "path to the file" "default printer name"
Is there another way to terminate the window not using switches in the command line statement?
I have tried using active x calls to open the doc and print but I am not seeing any print options in the active x calls. I have searched thourgh a large portion of the classes and could not find any print statements. I have also tried opening the doc with the system exec.vi and priting and then closing it with active x but I get an error message back.
Has anyone had any success in opening a pdf doc, printing and then closing the window automatically afterwards?

Hi gammalight,
i use Adobe Reader 7.0 and it works in this way for me. The document is printed with the default printer.
Mike
Message Edited by MikeS81 on 03-28-2008 04:26 PM
Attachments:
Unbenannt.PNG ‏5 KB

PDF document not full page but need to print it as a full page

Hi,
I have a pdf document which is 15 cm by 8 cm and need to print it as a full page without the white border making up the full page. How can I do this?
The document was created in publisher and saved as a pdf.
I am reading the document from Adobe Reader on a Windows XP machine.
Thank you for any help any one can give.

Do you have a printer that can print pages without a white border?
Very few printers can do this.
Aandi Inston

Print PDF document with printer's name and date/time of print

Hi,
I'm pretty new to this...
I have a PDF document and when I print it, I want the printer's name and the date/time of print to be showed on the printer's output.
I have several printers (some local and some on network) and don't necessarly use the default one. I would like the name of the printer used, to be printed on the document.
With var h = this.getField("Printer"); h.value = app.printerNames; I'm able to get the list of all printers available but I just need the one used.
For the date/time, using var f = this.getField("Today"); f.value = util.printd("mmm/d/yyyy", new Date()); gives me the date/time of when the document is open, not when the document is printed. (or maybe I'm missing something?)
I guess the date/time issue is not the major one as there is usually not much difference between the time you open the document and the time you print it.
I'm more interested in the printer's name.
I use Acrobat Pro 9 to edit my PDF document.
Can anyone help me please?
Thanks!

This project was left aside for a while... but it's now finished!
Thank you for the answers. It was helpful.
Here is a step-by-step of what I did (using Adobe Acrobat 9.5.1):
Open PDF document in Acrobat
Select Forms -> Add or Edit Fields
Add two text fields: one called "Today" for the date and one called "Printer" for the printer name
Close the form editing
Select Advanced -> Document Processing -> Set Document Actions...
Then select Document Will Print and Edit
Paste the following code:
var f = this.getField("Today"); f.value = util.printd("dd mmm yyyy - HH:MM", new Date());
var pp = this.getPrintParams();
this.getField("Printer").value = pp.printerName;
Save your PDF
Enjoy!
The date and printer name field will be automatically updated when you print the document!

PDF document print in duplex

Similar Messages

Maybe you are looking for