PDF Document will not print on wireless network

Recently purchased Fujitsu laptop with Vista Home Premium O/S, 2.4 Gig chip, 2 Gig Ram. Printer is Canon Image Class 880 multi-function printer. I am able to print Microsoft Word documents via the wireless network and can also print documents off of the web on the wireless network, except for downloaded PDF files.
When I try to print a PDF file, the print box will come up and show the correct printer. When I click OK in the print box, a "Progress" dialog box comes up and indicates "preparing" as a percentage of the total document the computer is trying to send to the printer. Then, the box turns grey, and a message comes up saying Adobe Reader had a problem and has shut down. Also, Windows Document Execution Prevention then comes up saying a problem caused the program to stop working correctly.
I'm not sure which version of Adobe reader came with the computer, but it was upgraded to 8.1.2 on 2/12/08.
Any helpful ideas will be appreciated.
Regards,
Dan Roberts

Check the support site here.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
Make sure you have the firmware update also.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Pdf documents will not print properly

    my imac running 10.5.8 will not print some pdf documents properly.  In particular sheet music will only print as horizontal and vertical lines - the symbols and notes do not print.  The 'print preview' shows all the symbols and notation correctly.
    This occurs in both Adobe Acrobat (v10.1.3) and Preview (v 4.2 - 469.5).
    Printer in use is a HP 2600n connected via USB cable.

    Seems it's not sending the Font to the Printer, or the Font has a conflict & the Printer thinks it's another Font.
    Open Font Book & Validate all Fonts & check for duplicates.

  • 7525 Wirelessly connected, loses internet connection, will not print from wireless network

    Have a 7525 Photosmart printer (approx 7 months in service) that has been working great until now.  I had to change the dsl/wireless router over the weekend and now I can't print wirlessly from the network.  According to the printer diagnostics, the printer is connected to the network but each time I try to print, the computer being used can't find the printer.  Checking the Wireless Network Test Results page, all is fine except there is no internet connection.  Restoring the internet connection requires a 're-boot' of the printer, i.e., switching it off and unplugging, after which network printing is restored.  However, that only lasts for a very short time, less than 1 minute, then no more network printing.
    I think there is something fishy with the IP address.  HP Print and Scan Doctor can't find the printer using this address. Typing the IP address into the browser gets an error message that the page cannot be found.  That address should lead you to the printer page, but it does not.  Changing the router resulted in an IP address change for the printer, but I wasn't even able to manually set the IP address via HP troubleshooting as it required the ability to get to the printer page from the IP address.
    I am rambling on, but I have reached my knowledge limit and hope that someone can give me some other suggestions on what to try next.    Thanks 

    Hi Seenders and welcome to the HP Forum,
    I understand that you are having connection issues with the printer on the network. I will try my best to help you resolve this issue. In this document for Printer Does Not Maintain Wireless Connection are different solutions that may resolve your connections issues. Once you have the printer up on the network make sure you update the IP Address on your computer.
    I hope this information is useful. Let me know how it works out.
    Thank you,
    I worked on behalf of HP.

  • HP LaserJet M1120 MFP will not print on wireless network with Windows 8.1 operating system

    The printer worked on the wireless network with Windows 8.
    I have been advised that it does not work with windows 8.1 because a driver is required. However this is not available to download.
    It is ridiculous that by having the latest operating system I am unable to use the HP printer on the wireless network
    When will HP have the driver to download?

    Check the support site here.
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
    Make sure you have the firmware update also.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Adobr Reader XI: document will not print: premium presentation paper

    I've had no problems with this before today. Adobe Reader XI gives me an error message that "document will not print". I tried it in draft, plain paper, and it printed, without a problem. I switched browsers, from Google Chrome, redownloaded the document (online labels) into IE8, then tried to reprint as premuim presentation paper, matte, color. Same error message. Yet, as a draft, no problem. I've uninstalled, reinstalled, updated drivers on Epson printer (WF2530), same error message. AShould I do a system restore to two days ago, since this is the last time there was no problem? I print product labels. 

    Thanks Atul,
    Th problem has recently been resolved when my new technician made some adjustmnents. The problem was not the fault of Acrobat. It goes back to my new high definition IPS monitor several weeks earlier. When using Windows Office 2007 I was seeeing green haloes mainly between letters such as" ll, ii, db" etc. where the vertical lines filled with green. In Adobe Bridge, the variable text in control boxes took on a red colour. My technician (at the time) sought help via the Microsoft Help site and found this was a common problem with professional high definition IPS monitors like my new one. The instructions (4 pages from the Microsoft site)  said to turn off the Clear Text Type and replace the font 'SEGOE' with Tahoma. As the technician workede his way through the steps, I watched as he marked them off as he went so as to ensure the changes were correctly made. This solved the problem but it wasn't until a week later when I tried to print a PDF file that my problems with Acrobat began. The PC was taken to another technican fora "second opinion" and this man fixed the problem within a short time by changing the font back to the Windows default, SEGOE. He may have done something else but when I saw the printer dialog panel on his workbench with no other problems either, I was anxious to try it with my new monitor. No more colour fringing/haloes etc and no further problems with Acrobat However, I was waiting a little longer before informing you of the outcome-just in case it didn't work.
    It seems that Microsoft may be incorrect in their 'Fix' advice as the font SEGO may well be required for Acrobat to print a PDF file?
    This case may now be closed with thanks for trying to help with a problem that in the end turned out to not your fault
    Bob

  • MacBook Air will not print on wireless Epson printer.  It says 'filter failed'

    MacBook Air all of a sudden will not print on wireless Epson printer.  The error message is 'filter failed'.  Shut down everything and rebooted, but still not printing.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select
              /var/log ▹ cups ▹ error_log
    from the hierarchical list on the left side of the Console window. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.

  • My Mac Pro will not recognise my Wireless Network.

    My Mac Pro will not recognise my wireless network. It is showing those around me but not mine. I have my iPhone connected to it and my friends laptop also. I have restarted my mac and also the router but still not appearing on my Mac. Help please??

    It was working previously but suddenly dropped out

  • IPhone 4s will not join Netgear wireless network at home

    Since my upgrade to iPhone 4s & OS 5 my phone will not connect to wireless network @ home via a Netgear router: asks for password & then tells me it's an incorrect password. My iMac, iPad & MacBook are all able to join this network, as is my husband's iPhone (one generation older). In addition, my new phone will connect to wireless at work. Any help would be so welcomed!!

    since you join with iphone 4s? you mean upgrade to iOS 6?

  • My deskjet 3050 says it is connected to the wireless network but will not print unless wirelessly

    my deskjet 3050 all in one j610 printer will not print wirelessly even tho it says it is connected to the network.
    It will only print when connected by usb cable.

    Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • One document will not print in color - all other docs are printing fine

    I just purchased an All Ine One Officejet Pro 8630. It will not print my proposal forms in color - although invoices and every other document that requires color seems to print just fine. The proposal form is formatted in in old Microsoft Access file.  Not sure that this would make a difference because I have had no problems with printing it in the past with color.  Any recommendations would be appreciated. Thank you.   

    So when you do print, does it come out in a grey scale with various shades of grey instead of the color or in just solid Black and White format? Also, on the PDF front, you can install either software I mentioned and that will allow you to "Print to a PDF File" and then you can at least view the PDF to see if your printing system from Access is outputing in color or not.  Just a troubleshotting idea.

  • Double Clicking on a PDF document, will not open

    When double clicking on a PDF document with the default document properties set to Acrobat Professional 8, the document will not launch Acrobat.
    If Acrobat is already opened however it will launch.
    I've tried:
    re-setting file associations
    deleting preferences
    Uninstalling and reloading Acrobat: (solves the issue for a time but after a period of use it reverts to this broken state).
    OS X 10.5.5 is fully updated, as is Acrobat 8.

    Another Utility that will do the same without aid of DVD.
    is a Utility called
    AppleJack version 1.5 works with OSX.5.x and version 1.4.3 work with all previous systems.
    download install the go into Single User mode (restart Command-S) wait for screen to come up will be in B&W as soon as it starts up release until you see a Blinking Block Cursor. type applejack as instructed on screen. follow the commands as shown in Order.
    I amazing what problems it can clear up. Font Caches are removed and others. If you follow all the way to the end. Its amazing how much your machine will speed up up not having to wade through obsolete Cruft. Note if you do everything to the end. will take you computer a few minutes to rebuild caches, and other items.

  • PDF documents will not open in Adobe Acrobat 5

    I have one computer with XP running Acrobat 5. I now have a second computer running Windows 7 with Acrobat 9 Pro.  When I take PDF documents from the computer with Acrobat 9 Pro to the one with Acrobat 5, the PDF docs will not open - an error message states the file is corrupted.  Why is this hapening and how can it be fixed?
    Thanks for any assistance - confused.

    #1 - The files were moved using a thumb/USB drive and "Safely Remove" was used.
    #2 - You may be on to something here for some: Some were created by AA9 but some others were scanned in and some were from AA8 that I had no trouble before.
    #3 - The only "special feature" is that the PDF files are searchable and some are a PDF of an image.
    These are basic PDF files.
    Thanks for your assistance

  • Downloaded Adobe document will not print.  What do In do?

    Downloaded documents, when I bring them up, will not print.  Screen goes gray and "adobe not responding" appears.  What to do?@

    Dave, please try opening the doc in Preview, if successful
    it should print from there.
    Good luck, Tom

  • My iMac will not display my wireless networks, any suggestions?

    I have 3 wireless netowrks in my house. My iMac will only display the one that is for my home automation system and it is not connected to the internet.  Any suggestions on this?  When I click the wireless icon at the top it only shows 1 network, it won't display my other network or my neighbours networks.  When I try to add one of the other networks in my house, it will not find them.

    Wireless Diagnostics - About
    Also try turning off Bluetooth

  • My iPad will not scan for wireless networks.

    I've tried all the obvious, on-off and then on again. I know there's a network here, but my screen just sends this message when I try to connect:
    "Could not scan for wireless networks". What do I do?

    it happends to me sometimes. put the plain mode for a few seconds. you can after go to normal function. normally my iphone start searching for the wifi just after that !

Maybe you are looking for

  • Packet does not exist

    Hello, I am developing a WebDynpro application with Java 1.5 and NWDS 7.1. When I use external jars in the project build path I get build errors that say that the packet ...does not exist and cannot read symbol...Same thing was working smoothly with

  • Making screen field uneditable in runtime

    Hi all,    I have a field that should be READ-ONLY when the screen appears (SCREEN-INPUT = 0). Then i should be able to select F4 help for the field, for which i make     SCREEN-INPUT = 1. But after selection of a value from the F4 help i want to mak

  • Adobe creative suite master collection

    I bought my son "Adode Cerative suite 6 Master collection" (academic version) Unfortunately – his laptop was stolen and had to install the second copy on his replacement. He had to take the second copy of CS6 off our main PC so he didn't go over the

  • My Ipads screen is completly frozen, and apple does not want to help me fixing it

    I have tried everything possible, the anser from apple is gthat his device was made 5 years ago. I was using the App, REAL RACING 3, and suddenly it Blocked the whole Ipad. <Edited by Host>

  • Qosmio X - How to clean it up?

    After several months it began to become too hot, but i can't even imagine how to get to the cooler, removing the keyboard - and no ideas what to do next =)