Pdf doesn't display even after reader 8.1 installed

I have Acrobat 7 installed on my computer long time ago; then
I downloaded and installed Acrobat Reader 8.1.2. But my air
application still can't display pdf. Is it because the old acrobat
7? I don't want to remove it because I sometimes need to write
pdf.

Agreed, but I think that for most Mail seems to be working fine. There don't seem to many posts complaining about Mail problems - well no more than usual.
Have you tried a Safe Boot which sometimes helps in solving odd problems. and if that doesn't help, re-installing the OS using the Recovery HD?
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
For a Safe Boot restart holding down the shift key until you see a grey progress bar. Once booted restart as normal from the Apple menu.

Similar Messages

PDF won't display correctly after being sent from iPad/iPhone

Hi,
Wondering if anyone can help me, we have a PDF come in to one of our users outlook accounts, it opens fine on the computer. However, he has then proceeded to forward this to a colleague through his iPad and when the colleague opens it on their computer, it gives an error message 'Insufficient Data for an Image'. From here the PDF doesn't display correctly, whereby it only shows when scrolled halfway down the page, when you scroll back up all information dissapears as though it were a blank page.
FYI the software we are using to open the PDF is Adobe Reader, which we updates to the latest version to test for this issue. In short, when opened on the local computer it works fine, but as soon as it is forwarded from an iPad it won't open properly (the document opens fine on the ipad before it is sent). I have also tested this through my iPhone and i get the same issue.
Can anyone help? Thanks in advance!

Any chance that a Microsoft Exchange Server is in the mix? Could depend on what version of exchange is used.
You will need to try a work-around. Apple seems slow on fixing this issue.
https://discussions.apple.com/message/25838683#25838683

How to read bytes(image) from a server ?how to display image after read byt

How to read bytes(image) from a server ?how to display image after reading bytes?
i have tried coding tis , but i couldnt get the image to be display:
BufferedInputStream in1=new BufferedInputStream(kkSocket.getInputStream());
int length1;
byte [] data=new byte[1048576];
if((length1=in1.read(data))!=-1){
System.out.println("???");
}System.out.println("length "+length1);
Integer inter=new Integer(length1);
byte d=inter.byteValue();

didn't I tell you about using javax.imageio.ImageIO.read(InputStream) in another thread?

Creative Cloud is Blank, nothing is displayed even after a reboot, what is the solution?

I did the following but it did not help,
Rename the opm.db file.
1.Close the Creative Cloud application if it's running.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
3.Rename the opm.db file to opm_old.db
4.Launch Creative Cloud
even after a reboot and installing an up date for Creative Cloud a blank screen is displayed

Hi urbanphotographer,
Please refer the thread: http://forums.adobe.com/message/6077848.
Regards,
Romit Sinha

My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p

my eprinter will not print in proper in colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
This question was solved.
View Solution.

Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

I cant open Tools in Menu of Mozilla. Even after upgrade and re install.

I cant open Tools in Menu of Mozilla. Even after upgrade and re- install.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also try:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

My adobe flash reader doesn't work even after updates

Even after repeatedly having updated the adobe reader, it still refuses to operate (it shows as being blocked and needing updating).

Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player
Adobe Flash Player updates available for OS X on October 24, 2014

Enabling/disabling the 'display PDF in browser' via a script after Reader 9 is installed

So we have Reader 9 already installed on the machine, but we need a simple way that a user can click on a shortcut in the start menu to reconfigure how the PDF is opened - either from within the browser or outside of the brower.
In Reader 7, I was able to use this:
msiexec.exe /i {AC76BA86-7AD7-1033-7B44-A71000000002} Remove=ReaderBrowserIntegration /norestart /qb-!
msiexec.exe /i {AC76BA86-7AD7-1033-7B44-A71000000002} ADDLOCAL=ReaderBrowserIntegration /norestart /qb-!
which works well after the fact that Reader 7 is installed on the machine.
For Reader 9, things have changed, and have tried this:
msiexec.exe /i AcroRead.msi /qn DISABLE_BROWSER_INTEGRATION=YES
msiexec.exe /i AcroRead.msi /qn DISABLE_BROWSER_INTEGRATION=NO
The above don't work, nor if I run a repair instead of an install. I also tried to modify the HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\Originals\bBrowserIntegration then following in up with the appropriate msiexec command and that didn't work
No, asking users to go to the options and enable/disable the setting isn't ideal unfortunately as it requires too many clicks
Anybody have any suggestions on this?

Try this forum:
http://forums.adobe.com/community/acrobat/acrobat_enterprise_install

Multiple Mail and SMS Notifications Even After Reading

Is it normal to get repeat notifications of Email messages and SMS messages?
The "repeat alert" setting under Settings>Messages is set to off, but I nevertheless receive two distinch audible or vibratory alerts (per message) whenever I get an email or SMS.
The second message occurs *even after I read the email or sms*.
Thanks for any ideas.
iPhone 4/OS 4.02

switche of stamnia did not help, but i think i found the troublemaker:
i disabeld every app to get the notifications (security->notifications) and then it worked everytime - then i activated all the apps that i need (there where two left overs - apps that i allowed to fetch notifications that i don´t use anymore....) and it still works.
the two apps are:
-floating notifications
-Garmin connect
i don´t like to test the both if one is the bad boy and the other one not...but now it seems to work!

Lion internet sharing/ audio output not working even after reading through/ following other threads

Hi, since updatig to Lion my iMac internet sharing is not working i have renamed to a shorter name as advised in other threads but this still does't work I wish to share my ethernet connection wirelessly but after turning it on i can never get the arrow symbol on the top bar. Also i can only play audio through the built in speakers but no headphones/external speakers even after playing with the audio midi settings as seen in other posts but no such luck.

First, see if you can change the "Play audio using:" selection in Edit > Preferences > Playback - if you select Direct Audio rather than Windows Audio Session this may address the issue. Note, however, that the Direct Audio option seems to be unavailable in some cases for Windows 8.1.
Otherwise, there is an alternative downloader for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the playback issues that some users have been reporting with the full 64-bit version (the alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer). The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
After installing this alternative version it may still be necessary to adjust the "Play audio using:" selection in Edit > Preferences > Playback to restore glitch-free audio.

ITunes cannot properly detect iPod even after uninstall and re-install

Recently I tried to sync my iPod nano (NOT touch) to my windows computer, but even after i completely uninstalled and reinstalled it says that it cannot properly detect it. I am running the most recent version of iTunes on Windows Technical Preview.

Did you uninstall iTunes and all other Apple related software using the instructions in this Apple support document?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
B-rock

Pdf doesn't display in NEW IE window, even with display in browser checked

We are using adobe 9.2 and IE 7. Has anyone had this issue and if so, how did you fix it?
Thanks in advance!!

Did you take care of these requirements?
The value bound to the action should return a string of the form "dialog:.....".
Eg: <af:commandButton text="Show More Information"
action="dialog:showDetail"/>
And there is a navigation-case that needs to be added to the faces-config.
<navigation-rule>
<from-view-id>/*</from-view-id>
<navigation-case>
<from-outcome>dialog:showDetail</from-outcome>
<to-view-id>/showDetail.jspx</to-view-id>
</navigation-case>
</navigation-rule>
Hope this helps.
Thanks,
Balaji

Acrobat trying to open pdf's in Safari even after uninstalled.

A lot of people have had this problem that after an Acrobat update, safari now opens pdfs with Acrobat (a bit obnoxious of them), which is slower and clunkier than Preview.
Many have written that clicking "get info"on a pdf, and "open with preview" plus "apply to all" fixes this problem. It does not.
I uninstalled Acrobat. Now Safari doesn't do anything with pdfs at all. It just opens a grey page.
How do I convince Safari to open pdf's with Preview again? I'm using mavericks.

Single-click a random PDF file. Press command+I (eye). This will pop a Get Info window over the top of Safari if it is open.
Just below the Comments section, you will see Open with: and Preview is selected. Click this selection, and instead, choose Adobe Reader. Below that is a Change All... button. Clicking on this will produce the following dialog:
Select Continue and Acrobat Reader will now be the default application that opens PDF files. If you later change your mind, follow these steps and reselect Preview.

My Finder window doesn't display properly after drag & drop

When I do a drag/drop - maybe to add a mail attachment or insert a picture into Powerpoint - the Finder window changes/freezes in that it I can no longer scroll up or left - any ideas what might be going wrong?
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Pdf doesn't display even after reader 8.1 installed

Similar Messages

Maybe you are looking for