PDF doesn't fit anymore

Hi,
We are converting PDF's from Word 2003 documents with Acrobat 9 Standard. Since yesterday the PDF doen't fit with the word document (see attached). It seems the text is set to 90 % zoom instead to 100 %. You can see that clearly on the grey block on the bottom of the page. It should be exactly on the page's bottom and in the edge, not somewhere else.
Reinstalled Word and Acrobat, but no success. Problem still remains.
Have anyone seen such weird output and know how to fix it?
Your help is always very much appreciated.
Thanks, Sebastian

Take a look at this shot:
http://i637.photobucket.com/albums/uu99/Dakine/3GJack1.jpg
It is a shot of how it should look, the white plastic at the bottom is the moisture indicator. If you see lint you may be able to get it out with a very thin wire with a bend at the end to hook the lint out, just make sure the wire is soft and the phone is OFF

Similar Messages

  • Headphones doesn't fit anymore

    Hey
    I have a little problem with my iPhone 3G, the headphones doesn't fit anymore. I have used the headphones with the phone since I bought it (July 2008) without any problems, but today when I tried to plug in the headphones, they didn't want go all the way down, and sound quality was terrible. I can push it all the way down (and the sound is normal), but it goes up again if I release them. It seems like something is stucked in side there (altough I can't see anything), or that something is broken. I have tried with two different headphone (both made for the iPhone 3G) with the same result.
    It could also be dust, but I seems strange that it should go from working perfectly fine (yesterday) to not working at all (today).
    Anyone experienced the same problem with their phone before?
    I'm considering going to the Apple Store in Orlando tomorrow to see if they can help (the ATT store where I bought phone couldn't help at all), but if someone knows something I can try before driving to Orlando, I would appreciate it.

    Take a look at this shot:
    http://i637.photobucket.com/albums/uu99/Dakine/3GJack1.jpg
    It is a shot of how it should look, the white plastic at the bottom is the moisture indicator. If you see lint you may be able to get it out with a very thin wire with a bend at the end to hook the lint out, just make sure the wire is soft and the phone is OFF

  • My Adobe Export PDF doesn't work anymore

    Why is it that I cannot convert a PDF file into a Word format anymore?

    There's a forum for that

  • Booklet .pdf with crop marks, booklet doesn't fit the current paper size warning

    Hello. I am on XP using CS4 InDesign.
    I have the document set up as 4 pages, each 8.5 x 11, however, when creating a booklet .pdf, I mean it to be 2 pages 11x17.
    When I add in the crop marks they do not appear on the .pdf when it is created. I receive a warning in the booklet diaglog that the booklet doesn't fit the current paper size and it says to specify a larger paper size.
    What can I do to have the crop marks on my file? I understand the .pdf will be a little larger than 11x17 in order to fit the crop marks.
    Thanks for any help in advance.

    Hi Peter,
    Thank you. I did try that first, but now I figured out what I did wrong. When the .pdf was made and opened, I cropoped the page according to the marks, but the page remained 12 x 18 instead of 11x17. I made sure that the "automatically adjust to fit marks and bleeds" and "use document bleed settings" was checked in the booklet dialog and print InDesign dialog.
    When I cropped the page again to make sure I sized it correctly, it was 11x17.
    Thank you!!!

  • I want to Open a PDF attachment in iBook, but it doesn't work anymore.

    I want to Open an Email attachés PDF in my iBook. Just do ist like always, but it doesn't work anymore.
    Can you help me.
    Thanks

    Try quitting the iBooks App completely, restart the iPad and see if that helps.
    Go to the home screen first by tapping the home button. Quit/close iBooks by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down the iBooks icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
    I know that Acrobat, full version, 10 works with Lion...use it myself.

  • Workspace doesn't fit the screen anymore...

    Hello.
    Since today (and Mac OS X's update I installed this morning, I guess), my Photoshop CS6 workspace doesn't fit the screen of my 12 inch Cintiq (connected to a 2014 Macbook Air).  No matter what I do, it keeps it wrong.
    Trying to set the photoshop window to the whole Cintiq screen with the "green" Mac OS corner button, this is what I get:
    Hitting F won't do the trick, this is what it gets me:
    I tried to clear the Photoshop prefs, without success.  I checked for updates and found there was a Photoshop update I had not yet installed, and I did install it, to no success.  Needless to say, this makes my copy of Photoshop most unusable, which is a really big problem for an illustrator like me.  I really wish I can solve this as soon as possible.
    Thanks.

    Yeah, no results. Still the same.
    If I take my main window and move it up by myself, it's just gonna stay there until the next click somewhere, then it gets back to this wrong placement,.

  • I dropped my MacBook air and when I dropped the corner where the charger would go dented the charger doesn't fit in it anymore

    I dropped my computer and the corner where the charger would go indented and charger doesn't fit aymore

    Take it to Apple and pay for an out of warranty replacement.

  • Export to PDF doesn't retain page settings

    Create a report with lots of columns and then change the page settings to be landscape and shrink to fit. Now run the report and print the report as a PDF. It works as expected.
    Now export this same report as a PDF. The export will not retain the page settings. Instead, it will export the PDF in portrait and it will not shrink to fit.
    If you email the report to someone, it also doesn't retain the page settings.
    I opened a TAR on this issue and I was told this was not a current feature of Discoverer. Exporting does not retain page settings by design and it would be an enhancement request to get this new functionality.
    We build a lot of custom Oracle Reports right now so that users can drill from one level to another. With OracleBI Discoverer, I can now do this with linking to sheets. With Oracle Reports, I can render the report in PDF format which is a business requirement. With OracleBI Discoverer, I can do this too except I can't export the PDF because it doesn't fit on the page correctly.
    Anyone else need this functionality?
    On another "enhancement request" note, I would like to be able to schedule exports. OracleBI Discoverer is getting close to providing an alternative to Oracle Reports which is great because it is faster to build and deploy reports and it is licensed by the CPU so I don't have to worry about buying Report Builder licenses. Lastly, business users can build their own reports rather than someone in IT doing it.

    ok, here's what I have found out (thanks to our Viewer guru, Matthew):
    The print/PDF preferences are currently not saved, so you are right when you say you have to re-apply those settings.
    However, there is a way to persist these changes within a session (note that since these changes are session-resident only, you will lose them once you exit Viewer).
    The short one line explanation of the workaround is to make the changes using the 'Printable Page' link, generate a 'Preview' or the entire PDF report, and then use the worksheet breadcrumb link to return to the worksheet. This ensures that the PDF changes you made are available during the sesion to the worksheet. You can always undo these settings by clicking the 'Revert to saved' link.
    I have posted the same information, but with screenshots, to http://oraclebi.blogspot.com/2005/12/pdf-settings-in-viewer.html
    Thanks
    Abhinav
    Oracle Business Intelligence Product Management
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    Discoverer: http://www.oracle.com/technology/products/discoverer/
    BI Beans: http://www.oracle.com/technology/products/bib/
    BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
    Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
    BI Samples: http://www.oracle.com/technology/products/bi/samples/
    OTN Forum: Discoverer
    Blog: http://oraclebi.blogspot.com/

  • G5, 10.6.8, trying to print biz cards, instead of clear print with sharp edges I get fuzzy print with pixels showing. Saving as PDF doesn't help. Any solution?

    G5, 10.6.8, trying to print biz cards, instead of clear print with sharp edges I get fuzzy print with pixels showing. Saving as PDF doesn't help. Any solution?

    Mac OS X Version 10.6.8, iMac12,1
    .cwk (Appleworks)
    Kodak Easyshare 5100
    If I paste the jpeg on a draw page and shrink it to fit, fuzzy print. If I create the text directly on a draw page, it's fine. (That suggests to me the problem isn't in the printer.) But I want to include a small drawing on the card, and the pasted jpeg of that small drawing is very poor quality.

  • Apple Mini-DVI to Video Adapter doesn't fit my aluminum iMac

    I previously had a 17" white iMac (pre-Intel) machine, and about 6 months ago I bought the mini-DVI to video adapter so I could connect it to my television. Worked like a charm. But I recently bought a new aluminum iMac, and the adaptor doesn't fit into the mini-DVI port in the back of the machine. It appears the adaptor and port are both male ends.
    Has the port changed on the aluminum iMacs? The product description for the adaptor on Apple's website says it works with iMac (Intel Core Duo). Isn't the aluminum iMac an Intel Core Duo? I can't figure out why it doesn't fit and which cable I'm supposed to be using instead.
    Any advice would be appreciated!

    Hi Paul
    Yes the Intel iMac [Spec's|http://support.apple.com/specs/imac/iMacMid2007.html] call for the (M9319G/A) Apple Mini-DVI to Video Adapter!
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 19G/A
    The iBook, eMac, or iMac G5 use the Mini-VGA to Video adapter.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=722 C6629&nplm=M9109G%2FA
    Dennis

  • My thunderbolt to firewire adapter doesn't fit the firewire???

    I bought the apple store "Thunderbolt to FireWire Adapter" today.  I'm trying to put my old iMac in Target Mode and move old files.  The firewire cord doesn't fit into it???  I'm sitting here feeling pretty stupid and stumped?

    Your firewire cord is the wrong size.  Apple's cord is 800 port.  What size is your cord? 

  • Mini Display to VGA adapter doesn't fit

    I have an older(2008) MacBook and the MIni display to VGA adapter I purchased doesn't fit my book. Is there one that I can buy that will fit?

    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
    Here's the various types of Mini-DVI to VGA adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_ss_c_1_15?url=search-alias%3Delectronics&field -keywords=mini-dvi+to+vga&sprefix=mini-dvi+to+vga%2Caps%2C272

  • How to deauthorize a computer , that doesn't exist anymore?

    I unisnstalled windows , and for some reason when i inserted my ipod to the freshly installed windows+itunes , and logged on my account , iTunes said , that its a new computer and asked me to authorize it , and so i did.
    My question is: how can i deauthorize my old version of windows , that doesn't exist anymore?
    I also have another question in this topic : When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?

    Take a look at this Apple support article; it may help:
    One computer using multiple iTunes Store authorizations
    When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?
    I'm not sure what you mean by this. What "items"? If you are referring to music, videos or movies, you get only one download per purchase, so if you buy the items again, whether from another device or the same one, yes, you will be charged again. Only apps allow redownloading without additional charge.
    Regards.

  • My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc)

    My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc) I can't find why.
    I trieds to go on Youtube and for that I have sound so it is just for the rings.
    Can somebody help me please?
    Thank you so much!
    Mary

    Have you checked your mute switch (right above the volume buttons)? If you see orange, it is muted and will affect the rings, but not the audio on YouTube.
    Just toggle the switch so you don't see the orange and check again.

Maybe you are looking for

  • ESATA is no longer recognized after I reinstalled snow leopard

    I have been using an Iogear 2-port adaptor card for an eSATA connection for Time Machine backups, have just reinstalled snow leopard because of the spinning beach ball (told to do it at the store). No other problems with the reinstall that I can tell

  • SAP NW BPM deploy issue

    Hi Gurus, I got an issue of SAP NW BPM deployment after I developed a NW BPM process example. The BPM example is used for interacting with SAP PO AEX for message orchistration. I paste the error text as below, hope someone could help me: ============

  • For all entries query

    Hi, can we do a for all entries with a table type parameter. select * from <tablename> for all entries in <internal table> (importing parameter in an FM a table type parameter)....where <cond>

  • Audigy 2 ZS and Halo 2 in Vista 64-bit

    I just purchased Halo 2. In Vista 64-bit, it sounds horrible using an Audigy 2 ZS. The problems come when the action picks up. The sound comes in and out. Sometimes, it cuts out all together. Come on Creative Labs, get us some decent drivers!!

  • Alv  grid : is it possible to create 2 header lines  ?

    alv  grid : is it possible to create 2 header lines  ? for example  : open year            close year from 2006            until   2008 data data data data i know that i can do so in alv list  , but is it possible in alv grid ( with screen )   ?