Pdf download not appearing in safari download tab

Hi
Recently I have discovered a problem,whenever I download a document the document automatically appears in the safari download tab (the tab with the arrow facing downwards) however this does not occur for pdf files. The pdf will download and go straight into my downloads folder in the dock, but it does not show in the safari download tab. This is a problem for me as i can't easily access my recenetly downloaded folders via the safari tab.
any help would be appreciated
cheers

The same situation is happening to me I bought motion 5 first and the FCP X and the FCPX shows up as install but the Motion 5 shows up like its not installed, but in the purchase section FCPX does not show only Motion 5, and if I click on motion 5 to install it it tells me that it was not purchase in that app store that it was purchase in another app store, but my bank account shows up like if it was already purchase I am afraid to hit install in the motion tab install because it tells me if I want to buy it again.

Similar Messages

  • Final Cut Pro x not appearing in my purchased tab after download

    Purchased Final Cut Pro x from the Mac App store last night and downloaded it to my Macbook Pro. I want to install it on my other Mac that shares an iTunes account, but it does not appear in the Purchased tab in the Mac App store. It has been downloaded and the tab to buy has changed to the installed tab. Does it normally take a while to appear or how can I fix this? (I have tried restarting the computer, software updates, and logging out and then back into the App store)

    The same situation is happening to me I bought motion 5 first and the FCP X and the FCPX shows up as install but the Motion 5 shows up like its not installed, but in the purchase section FCPX does not show only Motion 5, and if I click on motion 5 to install it it tells me that it was not purchase in that app store that it was purchase in another app store, but my bank account shows up like if it was already purchase I am afraid to hit install in the motion tab install because it tells me if I want to buy it again.

  • Apps downloaded in iTunes Store do not appear under iTunes Apps tab

    Apps downloaded in the iTunes Store (either as updates to existing apps or as new) do not appear under the 'Apps' tab in iTunes.
    iTunes requests my Apple ID and password and the files will download afterward.  However, they do not appear in the 'Apps' tab.  This is confirmed by right-clicking >> Get Info.  No update to the version and new apps do not appear.
    Of note, I am running Lion an iMac 3.06 Core 2 Duo w/ iTunes 10.7.
    My iTunes Library is located on a Mac Mini Server running Lion Server.  I've checked permissions and every folder and library file is set to 'Read & Write' so it doesn't appear to be a permissions issue.
    Any ideas?

    Also, I've tried individually downloading an app flagged for update in iTunes without any luck.

  • Text not appearing in Safari, but is in Firefox?

    Hello there,
    I've recently completed a webpage using Adobe GoLive. The thing is, any of the text in the pages will not appear in Safari, but does in Firefox, IE etc. I've changed about the character encoding, but nothing's worked for me.
    Another funny thing is, the if I make any of the text a hyperlink, then it does display in Safari (just the linked bit).
    I'm completely stumped!
    You can see my problem here: http://www.ireland-kilkenny.com
    I created part of the site using iWeb:
    http://www.ireland-kilkenny.com/pastnpresent/Past%20%26%20Present.html
    I'm really stuck for a solution to this!
    Seamus.

    Why is Safari so particular about coding standards, when other browsers will display the page with no problems at all?
    Safari is one of the younger browsers out there and so the developers concentrated on the core established standards - as time goes on they slowly add more of the 'quirks' that other browsers allow website designers to get away with
    WebKit is the core rendering engine of Safari and the developers have a website that shows what they've been working on. They also let you download a version of Safari that has been built with this WebKit to let you test out if various bugs have been fixed:
    http://webkit.opendarwin.org/

  • PDF is not opening  in safari

    PDF is not opening in safari . I have adobe prof 9, and safari is the latest version.
    Now, all I get is a black window and nothing loads.
    what should i do?
    i have added ad ones to open pdf in safari, but still doesnt work

    Carolyn, thanks -- your solution helped.
    Actually, I've had the issue in OSX Lion, whereby the .pdf didn't launch in Safari . . . well, not launch fully. 
    In my Safari Browser, there would be a blue Q (Quicktime logo) that appeared momentarily, and then the 1st .pdf page (only) would show.  But, not say, the other 17 pages . . .
    Anyways, in Lion I got a message "Cannot delete (Internet Plugins) folder because OSX needs it" or something like that --> so, I just deleted all the contents + quit Safari = solved!
    :] JB in California

  • Why do my 3rd party loops not appear in the "Loop" tab?

    I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
    Does anybody know the cure for this?

    If you drag your .wav loops into the arrange area do they function properly?  If not, you may need to convert them using Apple Loops Utility.  After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
    You might find this old thread useful:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

  • PS Project not appearing in cProjects Accouting tab

    I am able to create the PS Project from cProjects through status management (Flag for transfer) after the required accounting intergation and other configurations.
    However, I have a concern when I am linking an existing PS project to a newly created RPM Item and cProjects Project.
    I carried out the following:
    1. Created a PS Project with a WB Structure
    2. Created an RPM Item (with auto creation of cProjects Project)
    3. Under the item, uploaded the PS Project created under step 1, to the item
    4. Saved the upload
    Result:
    The PS Project structure is replicated in the cProjects operational project.
    Concerns:
    We now want to synchronize the accounting aspects in PS from cProjects Project (like we do when we mark a cProjects project to "Flag for transfer"). However, the newly linked PS project does not appear under the "Accounting" tab in cProjects.
    Please advise.
    Summary:
    Having linked an exisiting PS project to a new created item and cProjects project, we want the operation to continue as if the PS project was created by flagging the cProjects project.
    Thanks.

    Thanks... this helps me get to a part of the problem.
    Now that I have RPM item and a cProjects project linked to a PS project, I can manually link the cProjects tasks stc. to the PS WBS elements as relevant.
    In such a case, how will "Falg for Transfer" imopact this project? I mean, whereas "Flag for transfer" in other cases create a new PS project which we can see under the accounting tab, what happens when we set this status after we have manually linked the cProjects project to a PS Project. Also, how does the accounting updates take place in this scenario (from the cProjects front end)?
    Thanks...

  • Driver does not appear in the selection tab Windows8

    NDIS protocol driver does not appear in the Selection Tab and hence I can not run any tests on it. The client operating system is Windows 8 64bit Pro Premium. I tried reinstall driver several times, reboot client and studio machines, but with no results.
    Client itself is connected to the studio and is in "Ready" state.
    There was no problem running the test on the same driver with Win7 64bit client OS.
    HCK version is 8.59.29854
    The driver is build with DDK7.1.0
    Any hints on how to debug this would be helpful.
    Dmitry

    Have you uninstalled and re-install the HCK client on the test system?  This can cause the entry on the controller to not match up with the actual client system.  If this is the case, and you have done no testing on the system (as all results will
    be lost), please try this:
    1) Uninstall the DTM client from the test system.
    2) Delete the client entry from HCK studio in the machine management section.
    3) Reinstall the DTM client on the test system.
    4) Wait for client entry appear in the "Default Pool"
    5) Change client status to "Reset", wait for it to become "Ready", and try locating the target as I describe above.
    Paul - This posting is provided "AS IS" with no warranties, and confers no rights.

  • PPOME ,pers no,EE group,EE subgroup,pers area not appear in Basic data tab?

    Hi Friends,
                        I am new to SAP HR. I am trying to assign a person for a position in tcode PPOME. After that I could not see Pers No,Name,EE group,EE subgroup,Pers area details are  not appear  in Basic data tab. But for other persons which are all exist already in system ,I can see pers no,name,EE group,EE subgroup,pers area details. Could you advice what will be the issue?. Thnak you.
    Regards,
    Hock Teck..

    Hi Rajesh / Thomaselsy,
                                        Thanks for your response. Pls see my below output,
                 1.    Plogi Orga value is 'X'.
                2.I create person in PA with pers area ,ee group,ee sub group details and i can see all these details in PA0001 table. I did not create pers area, ee group ,ee subgroup for position ids. I wanted to see those pers area,ee group,ee subgroup detail, from pa0001, in PPOME under basic data tab.
               3.Whether I assign position id to a person in PA40 or assign a person in PPOME to a newly created position id,in both cases I can see details are updated in both PA0001 and HRP1001 tables correctly.
              4.I also tried to assing a position id to a person in PA40 and then through PPOME i tried to assign new position id for that same person. Then I can see new position id got  replaced in PA40 properly.
              But when I double click on person in PPOME, I could not see pers no,name ,ee group,ee subgroup,pers area under basic data tab..Pls let me know how to proceed further..
    Regards,
    Hock Teck.

  • SHCess field not appearing after using utilization tab in excise invoice

    Dear All,
    SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
    Please give the inputs.
    Regards,
    deepti

    issue resolved

  • Sales order number not appears  in account assignment tab

    Hi,
    User raised PO for third party and account assignment category.But ,Sales order number  and its item not appear in account assignment tab.
    Can anybody help me.
    Lucky.

    Hi Lucky,
    Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
    Thanks for your inputs on this issue.
    Regards
    Rang

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

  • Podcast pdf show notes appearing in Music library

    I subscribe to a podcast which posts both the mp3 audio file as well as pdf show notes. iTunes is confusing these pdf files as digital album booklets, and the pdfs are appearing in the music library, as well as in the podcasts library. The podcast mp3 audio files are ok, they do not appear in the music library, but stay in the podcasts library.
    I have noticed this behavious since iTunes 8. I am currently running iTunes 9.
    Anyone has any advise on how to correct this?

    I had a bunch of pdf files and other iTunesU files showing up in my Music list. The only way I could get this cleared up was to delete them and download again - the "KIND" category for some of these is new to iTunes and so with no classification, they will show up.
    You might be able to edit the info on these and add or change KIND values so they move to the right view.
    Tom

  • I lost my purchases music and it does not appear in the purchased tab in the itunes store ?

    i lost all my purchases music and went to re download them in the purchased tab in itunes store, but music did not appear only apps. Can anyone help me as i have over 100 songs purchased and would really appreciate some help ?

    dawnfromalloa wrote:
    i lost all my purchases music and went to re download them in the purchased tab in itunes store, but music did not appear only apps. Can anyone help me as i have over 100 songs purchased and would really appreciate some help ?
    This service is ONLY available in beta version in the U.S.
    "You could try going to the tab "store" then scroll down to "check for available downloads. I hope this helps!"
    This will not work.

  • PDF files not showing in Safari Windows

    When clicking on a link to a pdf file (example: <a href = 'xxx.pdf'>
    I get a blank window.
    Have Acrobat Pro, latest version installed.
    Is there a special process to install it in Safari? (Windows)
    Note: there is a Plugins folder in the Safari app folder, but inside it there iare only two Java plugins.
    Maybe the reader is not installed in Safari, if not, how would I install the reader for Safari Windows only?

    Make sure you have followed the directions below copied from this article....
    http://support.apple.com/kb/HT4227
    Syncing and saving PDFs
    To add PDFs to your iTunes library on your computer, simply drag and drop the PDF into your iTunes Book library.
    To sync a PDF to iBooks on your device:
    Select your iPhone, iPad, or iPod touch in the Devices list on the left in iTunes 10.1 or later.
    Click the Books tab in the resulting window.
    Ensure that the Sync Books checkbox is enabled.
    If iTunes is set to only sync selected books, be sure to enable the checkbox next to the PDF you want to sync.
    Click Sync.

Maybe you are looking for