PDF error: a start doc printer call was issued. PDF on Ne11.
adobe version. 6.0 pro
when converting any doc to PDF it comes up with error. you file could not be printed due to an error on Adobe PDF on Ne11.
-i tried to resinstall the app no luck.
-tried in Word, excel, Autocad noluck.
- i have several other machines and it works fine.
Please help!
Thanks,
Mike
Sorry for the delay, May I know the version of Microsoft Office you are having? I got your screen shots. Acrobat 6 Pro is compatible with AutoCAD 2000, 2000i, 2002 (but not 2002 LT), and 2004. You are having 2007 version. Again for Microsoft Office compatibility please check the link below. Make sure the Acrobat 6 is compatible with the Office and AutoCAD you are having.
http://kb2.adobe.com/cps/333/333504.html
Similar Messages
-
A Start Doc Print call was not issued - error appears
Hi
HP M1136 MFP used on windows Vista for over one year. Software reloaded using HP-CD supplied. Now "A Start Doc Print call was not issued" - error appears whenever print command from MS-Word, Excel or DF or even notepad is givenrrhp,
Welcome to the HP Forum.
You might wish to remove (from Programs and Features) and then reinstall your Full Feature Software:
HP LaserJet Pro M1136 Multifunction Printer Drivers
Find the Full Feature Software in Category "Driver - Software Installation Software"
Restart / Reboot the computer after the software installation is complete
Next, if you have not done so, take a look at the Firmware Update for your printer; check Category "Firmware".
NOTE: You will want to install the Software first, then perform the firmware update on the printer.
Finally: If you like, you can update / check the tools in Category "Utility - Diagnostic Tools"
Hope this helps.
Click the Kudos Star!
It is a great “Thank You” for the Experts who offer to help!
Kind Regards,
Dragon-Fur -
WLSE SQL1032N No start database manager command was issued
Hello,
i have a problem with my WLSE device.
it seens like db2 database fails to start.
2004@WLSE:diag all
DIAG: IMAGE
*** PASS: Software image verification passed. ***
DIAG: BIOS
*** Drive model does not require BIOS patch. ***
DIAG: DMA
Checking disk for DMA errors *** PASS: NO DMA IO errors found. ***
Checking disk sectors for errors ...*** PASS: NO disk sector errors found. ***
DIAG: DB2CLEAN *** PASS: No dump files found. ***
DIAG: DB2VERIFY *** FAIL: Cannot connect to DB2. Integrity verification failed. ***
DIAG: SERIALNO *** Serial Number -???????? ***
2004@WLSE:service status
Process= TFTP
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WirelessSvcMgr
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WLSEjobvm
State = Running but busy flag set
Info = WLSEjobvm started.
Process= WLSEFaults
State = Running normally
Info = WLSEFaults is ready.
Process= CDPbrdcast
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WLSEIdleServer
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WLSERepository
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= HaMibDaemon
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WebServer
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= Tomcat
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= ExcepReporter
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= PerfMon
State = Program started - No mgt msgs received
Info = Application started by administrator request.
snmpd (pid 1854) is running...
Database test failed
FAIL Version and product query result was:
SQL1032N No start database manager command was issued. SQLSTATE=57019
Any idea??? is it possible to start the database manager without restoring the database?
Thank you in advanced.This happens when the database of WLSE is corrupted. Use " reinitdb " command to reinitialize the database. Then try to stop the service for 5 mins and start again.
-
Error code 265: The certificate chain was issued by an authority that is not trusted.
We are in the process of trying to set up a wireless network that uses NPS servers to authenticate domain users with computers that are not on our domain (BYOD).
We are using a valid, wildcard SSL (with intermediate certificates) to authenticate via PEAP. The certificate was issued by Godaddy.
When trying to connect, we are getting the authentication request.
The result of a connection attempt is no connection with an event log error code of - “265: The certificate chain was issued by an authority that is not trusted.”
We have tried ensuring that the certificates are in the correct containers on the respective NPS servers: “Certificates\Personal\Certificates” With the intermediate certificates located: “Certificates/Intermediate Certification Authorities”
All these attempts have proven fruitless. Any assistance or direction would be very much appreciated.Hi,
Do you import the intermediate certificate in the right account? It should be imported in the Computer Account.
Have you imported the intermediate certificate in your client? Client need it to validate the certificate of your NPS server.
Here is a similar thread in which Greg has explained this issue in detail.
http://social.technet.microsoft.com/Forums/en-US/b770fcf6-d1e9-4aac-9005-62cb5ff6d485/the-certificate-chain-was-issued-by-an-authority-that-is-not-trusted?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support -
Error when starting Acrobat 8 or opening any *.pdf file!
I tried to reinstall, opening any other aplication - still the same...
By the way - cannot open any PDF file in any Adobe product...
please - help!The folder is Acrobat\Javascripts
Repair your Acrobat installation. -
Avoiding the 'Save PDF File As' dialog when printing to the adobe PDF printer from a service
Hello, can someone please help.
I have Adobe Acrobat 8 Pro installed.
I have an in house application which (among many other things) effectively monitors a directory and prints the file to the default printer. It works fine when run as an application.
I have set the defaults on the Adobe PDF printer to put the output PDF file into a directory and not to open it so it works silently without prompts.
When I run my application as a service, it brings up the 'Save PDF File As' dialog and I would like to avoid this. My impression is that if I put the right registry key in then it will work.
I do not want to do any scripting if I can avoid it.
Thanks for all constructive help given.Thank for your help Bill, but changing settings in the distiller did not seem to work. As my application prints directly to the default application without using anything specific to Acrobat, I was hoping there was a simple way forward. A colleague suggested copying registry entries from the account I logged on as to the S-1-5-18 entry, then rebooting. This had no effect as the prompt still comes up.
Aandi, I don't have the Acrobat SDK or any experience of it.
Also I'm not sure where any code/script would sit since the application is stable and so I would rather not change it.
If it amounts to a few lines of javascript sitting outside the application then that would be of interest. -
"Error - Printing" for only certain PDFs to certain printers with Reader 10.1.3
One of my users is unable to print specific PDF files to a particular printer. The same PDFs will print to other printers successfully from the Windows 7 machine. But, for certain PDF files the printer queue will show status = "Error - Printing". We have tried to print as image, saved the PDFs as different filenames but it still fails. There seems to be no pattern for the PDF types. One PDF is a scanned document and another is not scanned. The machine is able to print most other PDF files just fine to this printer and can print successfully from all other applications except for Reader 10.1.3 for these certain PDF files. The printer driver has been updated to the latest. The printer is a Xerox DocuCenter-IV 2060. AR 10.1.3 has been re-installed.
The PDF files in question open fine and can be viewed in their entirety (i.e. they don't appear to be corrupt). The fonts used are not any different from others used in PDFs that DO print ok. This is a complete mystery so, if anyone has ideas, please pass them along. Thanks so muchThis is a public forum; please do not post your email address or other private information.
Regarding your issue; it appears you have already tried everything possible - I have no other ideas what to try with 10.1.3.
The only solution for now I can see is to revert back to 9.5.1; is this a problem for you? This should be only temporarily until a new version of 10.x or 11.x becomes available. -
TMG - 0x80090325 -Certificate Chain was issued by an authority that is not trusted
Hello,
I am having some problems with testing a OWA (SSL) rule. I get that message.
The TMG belongs to the domain and therefore as far as I know it gets the root certificate of my CA (I have deployed a Enterprise CA for my domain).
That is why I don't understand the message: "...that is not trusted."
The exact message:
Testing https://mail.mydomain.eu/owa
Category: Destination server certificate error
Error details: 0x80090325 - The certificate chain was issued by an authority that is not trusted
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Thanks Keith for your reply and apologies for the delay in my answer.
I coud not wait and I reinstalled the whole machine (W28k R2 + TMG 2010) . I suppose I am still a bad troubleshooter, I have experience setting up ISA, TMG, PKI, Active directory but to a certain extent.
1. Yes, I saw it when hitting the button "Test Rule" in the Publising rule in the TMG machine.
2. No, it did not work in this implementation but it has worked in others, this is not difficult to set up, until now, hehe.
3. You said: "...If you are seeing it when running "Test Rule" then it simply means that TMG does not trust something about the certificate that is on your Exchange Server...."
But the certificates are auto-enrolled, and when I saw the details of the certificates they all are "valid" , there is a "valid" message.
4. You wrote: "...Easiest way see everything is create an access rule that allows traffic from the LocalHost of TMG to the CAS and open up a web browser. Does the web browser complain?..."
But as I said, I re-installed the whole thing because nobody jumped in here , and I needed to move forward, I hope you understand.
5. S Guna kindly proposed this:
If you are using internal CA,
You need to import the Root CA certificate to TMG servers.
Import Private Key of the certificate to Server personal
Create a Exchange publishing Rule and Point the lisitner to the Correct certificate.
Since you are using internal CA, You need to import the Root CA certificate to all the client browers from where you are accessing OWA
But I think I do not have to perform any of those tasks, although I am not an expert but have worked with Certificate for one year or so.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain) -
I cannot print web pages. I've tried the solutions suggested like deleting anything that starts with print in the prefs.js file but I get an error message: Script: c:\users\rick\appdata\roading\mozilla\firefox\profiles\iviwh5c1.default\prefs.js
line: 1
Char: 1
Error: invalid character
code: 800A03F6
Source: Microsoft JScript compilation errorWhen editing '''prefs.js''' you need to use a simple text editor program. WinXP Notepad messes up the line formatting of prefs.js, so I use Wordpad - but you need to save the edited file in a Text-Only format (Wordpad asks about that when you go to save the edited file). I never used Win7, so I don't know if that version of Notepad messes with the line formatting of prefs.js or not.
Another thing - make sure '''''"Hide extensions for known file types"''''' is de-delected in Windows file / folder options > view -> advanced settings. Otherwise Windows may add a .txt file extension that you won't be able to see, and that will break that file in Firefox. '''prefs.js.txt''' won't be recognized by Firefox, when is expecting to find '''''prefs.js''''' . -
I am simply running an action that converts all Word 2010 docs within a directory into pdfs in another directory. The Word doc is closed.
This is performed within Adobe Pro X. The directory to look in has been set. The directory to save in has been set, and is different.
The error message pops up after I run the action. If I click the OK button, the 'save pdf file as' box pops up, with Adobe printer's default save directory
(not the same as the above two) selected.
If I click Save, accepting the meaningless file name (ADPD5A5.pdf in this case) the problem goes away. If I chose cancel, the problem also goes away.
I don't want to save this pdf as anything other than what is set up in the action. How do I stop this from happening?
I've unchecked 'prompt for Adobe pdf file name' within the Word Adobe preferences, but to no success.
I will ultimately be converting scores of docs into pdfs, and cannot have to interfere with each one.
This worked fine on my XP machine, but now in Windows 7 64 bit (new machine, new Adobe install) it is causing this problem.A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
Printing error and Export to PDF error after a Quark Express convert
I are working on a catalogue that was previously made with Quark Express. I used q2id to convert over to InDesign CS3. I had some minor issues setting up the new fonts, but that was no big deal. Now that the catalogue is close to finished, I want to do some test print, however, on several of the files it start processing the printing, finish the processing of all the pages, then kills the print job and comes with the following error:
Print Error: The Adobe Print Engine has failed to output your data due to an unknown problem.
Similar error happens when I try to export to PDF, this error only says:
Failed to Export PFD file
Anyone had a similar problem?? I've done a preflight but ID does not indicate any problems with the file nor its content. Is there another tool to scan the file with to find errors?? Possible fix it?? Is there a log file I could check??
In advance, thanks guys.
Working on:
InDesign CS3
Windows XP Pro, SP02
2 GB RAMThanks Ken,
Not sure how to check if we do have OPI comments on some of the images, but looks like I have found a solution to the printing problem at least.
Thanks to a respons by Peter Spier to another topic with similar problems:
Peter Spier - 4:00am Mar 11, 08 PST (#5 of 6)
The symptoms could describe document corruption rather than network issues which might fall into the category of things that can be cleared up through export to .inx.
Try exporting one or two of the problem files to interchange format, open those and save as new .indd and make a new book file. See if that behaves differently across the network.
I also found another article about INX files, that confirms this technique:
http://avondale.typepad.com/indesignupdate/2005/08/what_the_heck_i.html
"...INX can also help “clean up” problem files in InDesign CS2—if you’re running into problems, especially with files that started their lives as QuarkXPress or PageMaker files, try exporting the document as INX and then opening that file."
So, I
1. exported all files, one by one to INX or InDesign InterChanged
2. Then reopened those files, saved back as regular .indd files
3. Reopend the new file (hoping for a refreshed file and test to see if it would open without problems.)
4. Then packed the files indevidually and reopend the new packed files when done.
Alle the files now print without any problems but export to PDF still fails with the same error message.
Would the OPI comment be a problem here maybe?
Thanks!
bard -
InD CS6 doc won't print or export to PDF
Hi, I'm having a problem with my document:
304 pages
Using master frames and master page items (page numbers and running heads, about 25 master spreads in all)
6 or so pages suddenly had an enormous pasteboard and the text on these pages disappeared (but did not reflow onto the next available page)
I deleted these affected pages, the text automatically reflowed and I added in new pages at the end of the doc to accommodate the overset text.
I also deleted the master pages that were assigned to the 6 affected pages and recreated them
The Indesign doc looks "fixed" but won't print or PDF. The error message is here:
I sent the file to a colleague and it appeared to work fine on her computer.
I also copied all the text that was in linked text frames (about 280 pages worth) and copied it into a new document. The new document also has master text frames but no other master page items. The new doc also won't print or PDF.
Sending the file to my colleague is a work-around that will do for today but I need the file to behave before I send it to the printer.
Any help?
Thanks!Yup, tried that
I have found a bit of a work around: I PDF'd the first half with no problem, then I tried to PDF the second half - this failed.
Then I PDF'd chapter by chapter until I found that chapter 12 was giving the error message, so I copied and pasted the chapter into a new document and PDF'd that.
The I combined the PDFs into one document in Acrobat.
It's a solution of sorts but still doesn't completely solve the problem of the original working file.
Thanks for the help! Happy holidays! -
After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?
See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I am trying to convert a pdf to a word doc. The pdf was created in Framemaker. I am using Acrobat XI Pro and getting formatting errors and scrambled (or missing) text, especially below a heading. Any fixes?
Hi pakbecker,
Please try updating to Acrobat 11.0.7 and check.
In case you still face issues, i would like to have a look at th doucment.
Send me an email at [email protected]
Regards,
Rave -
Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.
Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K
Maybe you are looking for
-
How does sinking work on iCloud photo library
Can I sync only a portion of photos or videos in my iPhone to the iCloud Photo Library?
-
It has been discussed on here before without any fixes coming from Apple... Essentially the problem is that I'm trying to set one preset for printing all of my documents and another preset that allows me to quickly print photos from Imagebrowser (a C
-
Hi can I use JUNIT to generate messages for testing proxy service if yes then kindly help me out with some example.
-
Transcode looks for old version of mjpegtools
I'm running transcode to convert an avi to an mpg for burning to vcd, using the following command: transcode -i myfile.avi --export_prof vcd -o myfile.mpg It fails because it tries to find libmjpegutils-1.7.so.0, which does not exist on my system. Th
-
BONJOUR J'ai un problème de synchronisation avec mes vidéos
qui peut m'aider je ne comprend pas ce que je dois faire