PDF exceeding page limit at 100 pages??

I am trying to export a pdf and it is telling me it exceeds the page limit and it will resize accordingly. I have saved the same document several other times and have not received this message. It is only 100 pages, so it does exceed the limit. I need to save this and I dont have much time. HELP!!

Not good. Sounds like you've been bitten by the bug that loses track of geometric bounds. Make a copy of the file for backup, then delete the "empty" pages and replace them with new ones (you can add them at the end of the story thread if you don't have un-anchored images on your pages), then reflow the overset text and replace any images that got lost. Do a Save As to a new file name and hopefully the file will be OK.

Similar Messages

  • Warning: you have exceeded the limit of 100 nested folders

    in red letters in Disk Utility. Machine slows and slows. Where, how, why, and whence do these folders get nested? and how to unnest, which one doesnt know which they are or where they are, out of thousands of folders? No utility out there can help, it seems.
    Jascha Kessler

    I have the exact same problem. I have an iMac G3,
    600MHz, 512MB RAM, 40 GB capacity, running 10.4.7. I
    have been using Apple Macs since their innovation.
    My computer is running a little slower, but I do not
    know if "Nesting of folders has exceeded the
    recommended limit of 100" is the culprit.
    I use Photoshop (on 9.2.2) quite a lot, but otherwise
    I use 10.4.7 all the time for everything else. I have
    searched the Information pages and Discussion panels
    for an explanation and solution, all to no avail.
    Nothing dastardly appears to have happened or about
    to happen to my computer, so I shall just keep on
    using it regardless. In the meantime, however, I
    shall keep looking for an explanation and I hope, a
    solution.
    iMac
    Mac OS X (10.4.5) 600 MHz Power PC G 3 512 MB
    SDRAM
    thanks for your interest. I dont know what causes all those nested folders; but I am on 10.4.8 now and no change in (mis)behavior. I run a G4 with now with 1600 speed from a replaced heart or whatever, and have 1.25 G Ram.. I find that I can locate all Empty folders with Spring cleaning, and delete them and get the machine running better and normally. I also clean up regularly with DISK WARRION, which seems to be hecessary, as well as Drive Genius from ProSoft Engineering. Meanwhile, I buy lottery tix, in hopes of a later Mac Pro desktop
    Jascha Kessler

  • When I try to go to certain pages on PayPal, I get an error message which says 400 Bad Request: Size of request exceeds server limit. Didn't do it before the lasted Foxfire update. Can I revert to an older version?

    1. Using Windows XP home
    2.PayPal is the only website I have problems with Foxfire; works fine on IE8
    3. I can get to some of the desired pages through other links on PayPal so it's not the pages themselves
    4. The error message contains this:
    Cookie: KHcl0EuY7AKSMgfvHl7J5E7hPtK=STMZXVPEjOuzek-HGHcBJRjmRXIQgXpML8uy9fV13oPeEYcAUnBOhKFzvNJqcb-rsc2S6nlYOklSdX6P; cookie_check=yes; LANG=en_US%3bUS; INSIDE
    When I saw Cookie, I did a disk clean including temp files and cookies. No difference. I also did a System Restore, to no avail.
    5. The 400 message actually reads: Size of a request header field exceeds server limit.
    6. Talk to PayPal customer service and they have not heard about any Foxfire conflicts.
    7. Windows Firewall and Kaspersky Firewall turned ON but this is the same configuration before the Foxfire software update. PS. I'll give up Foxfire before I give up Kaspersky

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Maximum number of allowed pages in Pivot Table exceeded Configured Limit:

    When trying to create Calculated Item on Pivot table Page section Item like Division dim the calculated item is 'All' -> sum * and Customer again the calculated item is 'All -> sum * . it performs the first calculation (for division) but in the next one it gives the error
    "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000)."

    Try limiting the resultset or upgrade the [MaxVisiblePages]
    see: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
    regards
    John
    http://obiee101.blogspot.com

  • I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics

    I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics with "Alternative Text".
    I know that with a Microsoft product graphics can be tagged before a PDF is made. I need to know how to do this with my programming.

    The Acrobat SDK might be a starting point.
    From there, perhaps a plug-in (built with C+).
    Perhaps with a licensed release of a PDF Library (this could be $$).
    The viable and cost effective alternative is use the tried and true.
    Authoring in an appropriate authoring application with appropriate tag management.
    Example:  Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
    This way you place "Alternative Text" when mastering content in the authoring file.
    Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
    Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
    Regardless, here you have a sub-forum for discussions on Acrobat usage.
    Consequently discussions on/of 3rd party software is rather out of scope eh.
    Be well...

  • How to avoid the hard limit of 100 column and items per page?

    I have created a Form on a Table with Report. I need to create/edit approximately 175 items. The items on the Form have a limit of 100 column and items per page. What is the best way to carry the remaining items to another Form and doing an insert or update? or is the 100 column limit on the insert/update per table as well?
    Thank You.

    Hi Rick,
    The 100 item limit is on a page, not a table, so you shouldn't have any trouble with your insert or update processes.
    Here's a thought:
    Report currently has a column that links to the first page of items (page 14) with the retrieved row. Presumably you also have a Add New button on the report page that links to page 14 for a new row.
    Define a Next button on page 14 that branches to the second page of items (page 16). Also define a Previous button on page 16 to return to page 14. But page 16 would be the only page with a Save button.
    Now, if user clicks Add New, user will get a blank page 14. Once user enters the info and passes validation they click Next and will be sent to page 16 to enter the remaining info and Save.
    If user clicks one of the column links, they will be brought to page 14 with the clicked row - they can change whatever info there and click Next, or just click Next, to get to page 16. After any changes are made, they click Save.
    I'm assuming you've been thru the tutorials and realize that you'd really have two Save buttons defined for page 16 - one conditional on your primary key item having a value (existing record) and one conditional on it being null (new record) - check out the tutorials for more info, but this is how the application would know whether to run an insert process or an update process.
    Hope this all makes sense and can help,
    John

  • Xp SP3 and PDF in page

    I am aware of the arguments against embedding PDFs in pages,
    but need to do this for a number of sites I manage.
    Up to the installation of XP SP3 on my system the other day,
    all seemed to work fine using <embed> inside <object>
    to cater for IE and other browsers. Suddenly FireFox and Netscape
    won't respond to the old code and I link this to my installation of
    XP SP3. My escape route has been to add a manual link to the PDF to
    cater for no-shows.
    Has anyone else encountered this?
    Is there a workaround?
    Example of my current code is:
    <object data="Resources/VitiligoMemFormApr08.pdf"
    type="application/pdf" width="100%" height="70%"><embed
    src="Resources/VitiligoMemFormApr08.pdf" type="application/pdf"
    width="100%" height="600px"></embed>
    </object>
    <a href="Resources/VitiligoMemFormApr08.pdf"
    target="pdf">Membership Form</a>
    Works fine in IE, Opera and Safari, but not FireFox or
    Netscape (all under Win XP SP3).
    The relevant page is at
    http://www.vitiligosociety.org.uk/printapplication.html
    Thanks for any help.

    I am aware of the arguments against embedding PDFs in pages,
    but need to do this for a number of sites I manage.
    Up to the installation of XP SP3 on my system the other day,
    all seemed to work fine using <embed> inside <object>
    to cater for IE and other browsers. Suddenly FireFox and Netscape
    won't respond to the old code and I link this to my installation of
    XP SP3. My escape route has been to add a manual link to the PDF to
    cater for no-shows.
    Has anyone else encountered this?
    Is there a workaround?
    Example of my current code is:
    <object data="Resources/VitiligoMemFormApr08.pdf"
    type="application/pdf" width="100%" height="70%"><embed
    src="Resources/VitiligoMemFormApr08.pdf" type="application/pdf"
    width="100%" height="600px"></embed>
    </object>
    <a href="Resources/VitiligoMemFormApr08.pdf"
    target="pdf">Membership Form</a>
    Works fine in IE, Opera and Safari, but not FireFox or
    Netscape (all under Win XP SP3).
    The relevant page is at
    http://www.vitiligosociety.org.uk/printapplication.html
    Thanks for any help.

  • How to get the Pdf's page size?

    Hi,
    Anyone can tell me how to get the pdf's page size with js in acrobat?
    Regards
    Goldbridge

    The page size will not always necessarily conform to a standard size such as A4 - PDFs can be defined at any abstract size a user wants. Having a function that only output standard sizes would greatly limit its ability, so it was left up to the user to calculate whether or not the returned rectangle is a standard size as that satisfies many more workflows than the opposite method.

  • How to allow domain users to customize  Adobe PDF  printer page size in Printer Preferences

    Hi
    I am able to customize  Adobe PDF  printer page size in Printer Preferences in admin login but not able to customize  Adobe PDF  printer page size in domian users login...
    can I have a solution to customize  Adobe PDF  printer page size in domin user login

    WOW! I was amazed to see that within minutes of posting my initial thread, I tried something that works.
    Apparently, the only way is will actually convert is if you select the regular Print option in the File tab. Then, change the Printer to Adobe PDF & the Paper Size to 11x17. It also worked for 36"x48" becuase I created a custom size named "Poster", so I changed the paper size to Poster & it worked!
    I hope this helps someone. I searched for an existing forum on this issue off & on for MONTHS before creating this thread. If anyone has any suggestions why the Adobe PDF tab /PDF Maker wouldn't work, I'd like to know.

  • Two finger "back" of "forward" swipe in Safari won't work on PDF web pages.

    This is a problem that carries forward from OSX 10.6 when using the swipe gesture on the magic mouse for browsing "back" and "forward" in Safari. It now continues with the mouse and on the track pad in 10.7.  When viewing PDF web pages the 'back" and "forward" swipe gestures work only sometimes, and when they do work, it requires a much faster swipe.  There are no issues associated with clicking on the back and forward buttons at the top left corner of Safari, so this appear to be isolated to gestures.  Is there any solution to correct this inconsistency?
    Thanks,
    Marc

    Indeed, swiping back from pdf pages sometimes works, but most often does not.
    It seems that the swiping gesture has in all cases changed slightly. It is now necessary to swipe a little until a portion of the previous page is uncovered, and only then can one swipe back.
    The fact that there is a specific way to swipe back from html pages suggests that there might be an equally specific way to swipe back from pdf pages. I am still experimenting. Meanwhile make sure no one is sitting to your right in case your trackpad flies off during a gesture trial.

  • Can't print pdf web pages

    using OS 10.4.11, safari 3.1.1, and adobe professional 7.0, I find that although
    I can print most web pages, I can't print a pdf web page.
    any thoughts ?

    where do you make that selection?
    Not sure where in Acrobat Professional, but in the free Acrobat Reader, it's in Acrobat Reader menu > Preferences > (category) Internet > "Display PDF in browser using:" - uncheck the box and that should cause Safari to use it's own PDF display engine (shared with Preview).
    how do I make Safari show scroll command along page side - right now I seem to have lost ability to scroll up and down web page ?
    That's a puzzler - the vertical/horizontal scroll bars should always be there if the page is longer/wider than the current size of the display window... Might try posting that one in the Safari for Mac forum.
    Hope this helps...

  • Unable to mark the box 'create Multi-page PDF from page tiles' when saving to pdf-file

    I am running Illustrator CS3 on a Mac OSX 10.5.8
    I want to print a very large illustrator-file (1000 mm x 900 mm) across mutliple pages of A4-paper (5 x 5 sheets of A4-paper) by saving the file as a multi-page pdf file.
    I first followed the instructions provided here:
    http://helpx.adobe.com/illustrator/kb/create-mutli-page-pdf-illustrator.html
    When I then tried to save the file: -> File -> Save as -> 'choose .pdf from drop-down menu'
    I get to this menu:
    I am unable to mark the box that says: 'Create multi-page pdf from page tiles'. I have made a red arrow pointing to the box I want to mark.
    I have tried changing the other drop-down menus inside this menu, to see if the box I want to mark could become available, but without any luck.
    I am not sure what I am doing wrong. I would be grateful if anyone could help me set my settings right to allow me to create such a multi-page pdf-file.
    Thanks in advance for your help

    Your ps file should be good, the problem likely resides elswehere. Maybe in your acrobat install, distillers settings. what error did distiller give?
    Mine ran good and got a multi page document, here is a screenshot to help you troubleshoot.
    On mac go to system preferences / print and fax / and change your default printer if you have another option. I know sounds like this should not help, but there are problems like Illustrator for example not making .pdfs if you do not have a printer chosen or an old or corrupt .ppd assigned.

  • How does I resize a pdf file page using Acrobat Pro?

    In Acrobat Pro, how can one resize a pdf file page (21.38'' x 26.75'') into one measuring 6'' x 9'', to be submitted as the trim size? Is there a feature that allows this to be done? How does one set all print options from the Application print dialog box to enable one to adjust the dimensions of any customized file page?

    I want to scale the 21.4'' by 26.8'' content down to one that can be fitted inside a 6'' by 9'' book.
    I have this pdf that was created from the InkFlow app, and I'm using Acrobat Pro to merge three files into one (about 300MB), which I needed to submit to Amazon's CreateSpace, but they needed the trim size of 6'' by 9'', while the pdf is 21.4''' by 26.8'', and I can't amend the source file size of the InkFlow files.
    I tried fiddling with the Crop and Print options, but I'm unable to resize the pdf to match the trim size. The problem on my side isn't so much on printing but to resize the pdf file page to 6'' by 9'' to satisfy Amazon's requirement for their trim size. Could this be done with Acrobat Pro? The message that appears is: Full print options of Acrobat Pro, set all print options from the Application print dialog box. Thank for the help.

  • How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    Hi skt102711,
    I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
    Regards,
    Rahul

  • Copying text from PDF to Pages

    I am trying to copy text from a PDF file into Pages, after pasting the copied text into my new Pages document the spacing between most of the text becomes corrupeted,
    for ex.
    "Copying text from PDF to Pages" is imported as "CopyingtextfromPDFtoPages"
    does anyone know how to correct this?
    Imac   Mac OS X (10.4.7)  

    Rishi,
    Welcome to Apple Discussions.
    After reading your post, I tried to duplicate this problem. I opened a PDF, selected a sentence, then copied it to the clipboard. I then opened Pages, selected the blank template, then pasted in the text. It pasted perfectly.
    Does this problem happen with all text in a PDF? With different PDFs?
    -Dennis

Maybe you are looking for