PDF Expert won't edit files after iOS 7 installed

My iPad mini is locking up when I attempt to move files in PDF Expert after downloading via iTunes. How can I get this feature to work?

You need to get rid of all those duplicate files. Put these in the Trash:
Adobe Reader 7.07 (all copies)
AdbeRdr708enUS.dmg
This should leave you with one copy of Adobe Reader 7.08 in your Applications folder, with the correct Adobe icon.
Now run Disk Utility and choose Repair Permissions. When it's done, try double-clicking on the Adobe Reader icon and see if it starts normally. If not, make a note as to any error messages or unusual behavior and post again.
Mulder
If this answered you question, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz Mac OS X (10.3.9)

Similar Messages

Rand new iPhone 5s black, dead, won't power up after ios 7 upgrade...held down top button, held down home button...dead. Was fully charged, working fine tell said yes to upgrade. HELP!!!

Brand new iPhone 5s dead, black won't come on after ios update...is fully charged, was working fine till said yes to upgrade. Did not watch process beyond seeing Apple logo appear, left it alone, came back, dead. Tried holding top button, tried home button, nothing...HELP!!!

If iTunes does not recognize your iPhone even if it’s plugged in, you may need to put it into DFU (Device Firmware Update) mode. If you have to put the device in DFU mode, you will most likely be unable to back it up.
Hold Power button for 3 seconds and then the Power and Home together for 10 seconds (exactly).
Release Power but keep holding home until the your iPhone shows up in iTunes.

Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install. The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years. Lots of pictures in the 55 gb are not showing for some reason.

No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
LN

HT1414 How can I retrived my old files after iOS was restored by 1 of the apple store?

How can retrived my old files, games and pictures after iOS was loaded?

Restore off of your computer, and set up your phone off your previous back-up.

My N73 ME won't turn ON after I install PC Suite.

My Nokia N73 Music Edition won't turn ON after I update the version of my PC Suite from V 3.0638.0.0.30 to V 4.0727.2.2.1
can somebody help me with this I can no longer use my N73 ME now
and I don't what to do to resolve this problem and I need your help.
Personal Information RemovedMessage Edited by adisaily on 10-Sep-2007 06:30 AM

Hey! Don't mind.
First Off, you upgraded your phone, not PC Suit.
You most probably did it by using PC Suit (PC suit uses Nokia Software Updater) to upgrade it.
I suspect there was some fall out while downloadin or installin the updates.
Earlier I would advise people to go to nearest Nokia Care centre.
Now, the 3 fingers action might cure it well,though I'm not sure.
The method:
--The number 3---the * star----The green call key--- .
If the phone still cant turn on.
Then, if you have any warrenty and have a nokia care centre near you, make a trip to there.
They will cure it.

Can I update with a CAB file after I installed BizTalk ?

Can I update my base configuration of BizTalk with a cab file after everthing is installed and configured ?
I missed installing it while I was installing BizTalk for the first time, now I want to update it with a CAB file. Is that possible ?

Hi,
BizTalk Server relies on different products and technologies to provide essential services and features. CAB file contains softwares that are required by BizTalk server to
successfully install on your computer.
You can select the cab file based on the edition and server you working with. Link below:
Redistributable CAB Files
Now coming to your question, as I have mentioned above the CAB file contains the
prerequisites
required for successful installation of BizTalk. While installing BizTalk on Redistributable
prerequisites
screen you must have either manually or automatically installed the CAB file already.
If you have already successfully installed and configured BizTalk, I dont see any issue with the CAB file.
I don't buy that 90% consumption of the CPU is due to bad or wrong CAB file selected while installing BizTalk.
I would advise you to go through the below link:
What you need to do to prepare for and install BizTalk Server
Rachit

Time machine won't back up after Maverick install

Installed Maverick today on macbook pro, then have been unable to back up to Time Machine to my Western Digital 3TB drive. Last back up was successful just before install earlier today.
Time Machine Error "Files can’t be copied onto the backup disk because it appears to be read-only.
and a second message
Time Machine couldn’t complete the backup to “My Book”. Files can’t be copied onto the backup disk because it appears to be read-only. You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk.
First restarting after Maverick install I received an error message that the disk "my book" could not be repaired.
When I go to get info on the external drive, under sharing and permissions it sayes I can read only, and I cant figure out how to change this everything to try is grey'd out.
Any help in fixing the problem and understanding the issue.

I'm also having this issue. I havn't had it before.
Any help would be appreciated.

Impossible to open .dtproje file after re-installing SQL Server Management Studio

Hi all,
today, after re-installing SQL Server Management Studio from a package downloaded from MS web site (SQLManagementStudio_x64_FRA.exe), I tried to open a SSIS package file via Visual Studio and I get a message stating that this type of project (.dtproj)
is not supported.
Here are the events that lead to this problem:
We have SQL Server 2005 installed on a server and are planning to migrate to SQL Server 2012.
1 - Earlier this year, to solve a problem that we had with the SSMS client, we installed SSMS 2012 client on my station.
At this point, it worked fine for SSMS and when I tried to access SSIS it converted the packages to SSIS 2012 and it worked fine too.
2 - Yesterday, I tried to access SSMS and I had the message that the test period had expired; at this point I could open a SSIS file.
3 - To solve the problem with SSMS we decided to re-install it. It worked fine for SSMS but now I am not able to open a SSIS file.
Do you have any idea of what the problem is and what should I do to solve it?
It seems that there are some SSIS component missing, how could I get them back?

You are welcome Sylviep,
Based on what I see you want to create BI projects (e.g. a SSIS project), thus it will be enough to install SSDT
which is part of the SQL Server installation media. I do not see why you would re-install SQL Server itself.
Arthur My Blog

IPhoto 8.1.2 Double Library File After Lion Install

Hi, After Lion install I'v got a double iPhoto Library File in iPhoto 8.1.2 whil I have only one library.
Is this normal ? Is there a way to get rid of one of the two files or to combine them ? On other Macs only one file shows up.
See screenshots.
In the Finder only one iPhoto Library appear in the images file.
This is the content of the IPhoto Library package :

That's an issue with the Dock. I would trash the Dock caches. I would post on the Using Mac OS X forum for more on that.

Lost document files after Mavericks install

After Mavericks install from App Store, document folders located in Dock are replaced with question mark icon; unable to locate files in Trash, iCloud, or Finder.
While I appreciate feedback on backups, never have had issues losing files before when installing apps from App Store. Please advise.

I have the same problem. It just accured today, and i updated to Mavericks several weeks ago. I cant open several folders in Finder but when i right click on them it say that they contain eg. 5 Gbit... But i still cant see/open anything in some folders.
Also yesterday (right before i realised the Finder problem) my computer was slow and acting weird so I tried restaring it, and after it sayed that my start-up-drive (or somting like that) was nearly full. It wouldnt start propoly after that, but then after a few goes I got it to work... I have no clue whats going on really..

401 Error for all files after CF8 install?

After I install coldfusion 8 on windows server 2008 with IIS7, I get a 401 "Unauthorized user" error for every page, regardless of whether its a CFM page or not. When I uninstall CF8 the error goes away. Has anyone else had this issue? Is there a resolution?

I was getting the same "-36" error while trying to backup to a Lacie firewire external drive.
I had a lot of people telling me to re-format, erase, reinstall, run utility programs ... yada, yada, yada.
First off, test to see if it is the connection type (firewire). I reconnected the offending external drive via USB, restarted the drive and ... BINGO! ... all transfers went perfectly.
Once i knew it was the firewire connection and not the drive itself i simply unplugged my iSight camera (the only other firewire device connected to my machine), reconnected my external drive via firewire and the problem is now corrected.
Firewire buses seem to be very finicky things ... i would suggest eliminating all firewire devices from the machine (except, of course, the external drive you're trying to transfer to) and see if the problem goes away.
Like i said, i simply unplugged my iSight camera and the transfer to my external drive went perfect and my transfer rates went from an average of 4MB/sec to over 19MB/sec.
P.S. BTW - prior to the error and after i corrected the error by unplugging the iSight camera, my internal and external drives all checked out 100% on Disk Utility, Disk Warrior and TechTool Pro.

Ipad 2 won't power on after ios 8.02 upgrade

I have a 64 gig Wi-Fi only iPad 2. I recently upgraded to the iOS 8.02 operating system. The problem I am having is that I can no longer get the device to power on properly. I start the device and get the apple icon as usual; but instead of going to the home screen, it simply goes black after a minute or two. I tried restoring to factory settings and that didn't seem to work. The only way I can seem to get the device to start up is by plugging it into a usb drive on the PC. Even doing that though, results in a trial and error process.
Is anyone else experiencing that and has anyone found a solution? Very frustrated.

Hello there, elissafromdenton.
The following Knowledge Base article offers up some great steps for troubleshooting iOS when it is not fucntioning as expected:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Finder window in apps won't show files after upgrading to Mavericks

Has anyone encountered a situation where you are working within an application and do a File->Open kind of dialog and when you select a directory the spinner just spins forever and nothing is shown in that directory (when you KNOW there's something there)?
I am having this problem randomly. For instance, I opened Sublime Text 2, went to File->Open, navigated to a directory and nothing showed up. The spinner went round and round as if it was waiting on something. I closed the dialog, tried again, and it worked fine. It's happening regularly, but I can't seem to reproduce it.
Any others experiencing this?

Tonight, Finder just plain wouldn't open any folder after popping up on Apple Mai
Ok, this isn't an issue that some NON-Apple program isn't calling Finder correctly. This was Apple MAIL for God's sake. I went to attach a document, and then FINDER just wouldn't open any sub folder. Not ONE. The little "circle of wait" was spinning, and I let it for 10 minutes! Nothing ever came up.
THANK GOD for Path Finder, a Finder substitute that runs rings around the native functionality. I was able to easily open it, and drag files to Apple Mail and send the files.
What this tells me is, again, NOBODY at Apple is doing beta testing. I am honestly about to just put my Mac up for sale and go back to Windows ( I NEVER thought I'd say that!)

ITunes won't detect iPhone after iOS 7 Update

Since I've updated to iOS 7, iTunes (11.1) won't detect my iPhone 5. Any advice..

Hello FahadSheikh,
Have you tried to reinstall itunes? ... That's odd! I updated my iphone 5 recently and itunes works perfectly!
... Hope you can solve this issue FahadSheikh!

Unable to edit file after saving with add-in

I'm only just starting to test the Vibe add-in. Looks good so far, but I've noticed one fairly important issue.
If I start with a new file and save it for the first time, all is well from within MS-Word. I can save, continue editing, and save again. However, if I then login to the Vibe site I can't actually edit the file, at least not immediately, nor can any members of my team. As of now, the two test files I've created cannot be edited on the Vibe site.
Of course, I realize that the add-in is beta, but I just thought I would bring this up. I'm also wondering if anyone else has observed the same behaviour. Thanks.

This is the vibe file edit applet, right?. Not sure this has to do with desktop. Seems to be you are having problems with the editor on linux and mac. Can you upload a file without using desktop and test editing that? I think maybe you are having some of the problems described in the readme with the vibe edit applet.
What are you expecting to happen when you click on edit in linux?
6.7 Restrictions on Applet Support
Applets are not supported on 64-bit Firefox on a system with a Java Runtime Environment (JRE) earlier than 1.6.0_12.
On a 64-bit operating system, updating to JRE 1.6.0.12 or later enables the applets to work.
For example, multi-file drag-and-drop from the desktop, file paste from the desktop, Edit in Place, and the graphical display in the workflow editor do not work where applets are not supported.
6.8 Edit in Place Support for Mac Users
For Mac users, Vibe looks for OpenOffice.org in the following directory on users Mac workstations:
/Applications/OpenOffice.org.app
If your organizations standard location for OpenOffice.org is in a different location on users workstations, you can reconfigure Vibe to look for OpenOffice.org in your preferred location.
1.
Change to the following directory:
Linux:
/opt/novell/teaming/apache-tomcat-version/
webapps/ssf/WEB-INF/classes/config
Windows:
c:\Program Files\Novell\Teaming\apache-tomcat-version\
webapps\ssf\WEB-INF\classes\config
2.
Open the ssf.properties file in a text editor.
3.
Locate the block of lines that start with:
edit.in.place.mac.editor
4.
Copy that set of lines to the clipboard of your text editor.
5.
Open the ssf-ext.properties file, which is located in the same directory as the ssf.properties file.
6.
Paste the block of lines you copied at the end of the ssf-ext.properties file.
7.
Edit the location of the OpenOffice.org software to reflect its location in your organization.
8.
Save and close the ssf-ext.properties file.
9.
Close the ssf.properties file without saving it.
10.
Stop and restart Vibe to put the new software location into effect on your Vibe site.

PDF Expert won't edit files after iOS 7 installed

Similar Messages

Maybe you are looking for