PDF Export Compression - Actual or  Effective?

Hi,
When I create a PDF Export Preset under compression I can set the downlsampling PPI for images at or over a certain PPI e.g. Bicubic Downsamling to 300 pixels per inch for images above 450 pixels per inch.
When I place an image in a document I see the Actual PPI of the image and if I scale it or resize it I see an Effective PPI.
My question is, when I set the compression values does the exporter use the Actual PPI of the image or the Effective PPI once I've placed it and sized it as I want?
Tony

If downsamples based on the effective resolution since that is all that really counts in the PDF file.
          - Dov

Similar Messages

  • Captivate 8 : the PDF export created a file with a PDF extension.. but it's actually a video. Shouldn't it export the slides as a proper PDF document ?

    In Adobe Captivate, there is a "PDF export" checkbox available when you publish your project.
    It checked the box, and the project pulication created a file with a PDF extension.. but it's actually a video. Shouldn't it export the slides as a proper PDF document ?

    Thanks for the quick answer. I did not know about interactive PDFs..
    I just found how to export as a Word document. I would have expected to find that option in "Publish" or "Export", not "Print".. Anyway, I now have what I needed

  • INDS PDF export issue

    Hi,
    Exporting large document from InDesign takes significantly long time in InDesign CS6 server. Our document has minimum 1200 page needs to be exported to PDF. It takes around 12 minute to export with "smallest file size" preset. Our requirement is to export quick PDF rather then smallest size pdf.
    Can some one suggest best setting to fastest PDF export from InDesign. Here is PDF export settings that we use as alternate to "smallest file size" ?
    //Basic PDF output options.
                pageRange = PageRange.allPages;
                acrobatCompatibility = AcrobatCompatibility.acrobat6;
                exportGuidesAndGrids = false;
                exportLayers = false;
                exportNonPrintingObjects = false;
                exportReaderSpreads = false;
                generateThumbnails = false;
                includeBookmarks = false;
                includeHyperlinks = true;
                includeICCProfiles = true;
                includeSlugWithPDF = false;
                includeStructure = false;
                interactiveElementsOption = InteractiveElementsOptions.doNotInclude;
                //Setting subsetFontsBelow to zero disallows font subsetting;
                //set subsetFontsBelow to some other value to use font subsetting.
                subsetFontsBelow = 0;
                //Bitmap compression/sampling/quality options.
                colorBitmapCompression = BitmapCompression.AUTO_COMPRESSION;
                colorBitmapQuality = CompressionQuality.LOW;
                colorBitmapSampling = Sampling.BICUBIC_DOWNSAMPLE;
                colorBitmapSamplingDPI = 100;
                thresholdToCompressColor = 150;
                //colorBitmapSamplingDPI is not needed when colorBitmapSampling is set to
                //none.
                grayscaleBitmapCompression = BitmapCompression.AUTO_COMPRESSION;
                grayscaleBitmapQuality = CompressionQuality.LOW;
                grayscaleBitmapSampling = Sampling.BICUBIC_DOWNSAMPLE;
                grayscaleBitmapSamplingDPI = 150;
                thresholdToCompressGray = 225;
                //grayscaleBitmapSamplingDPI is not needed when grayscaleBitmapSampling is
                //set to none.
                monochromeBitmapCompression = MonoBitmapCompression.CCIT4;
                monochromeBitmapSampling = Sampling.BICUBIC_DOWNSAMPLE;
                monochromeBitmapSamplingDPI = 300;
                thresholdToCompressMonochrome = 450;
                //monochromeBitmapSamplingDPI is not needed when monochromeBitmapSampling
                //is set to none.
                //Other compression options.
                compressionType = PDFCompressionType.compressObjects;
                compressTextAndLineArt = true;
                cropImagesToFrames = true;
                optimizePDF = false;
                pdfDestinationProfile = "sRGB IEC61966-2.1";
                pdfColorSpace = PDFColorSpace.RGB;
                //Set viewPDF to true to open the PDF in Acrobat or Adobe Reader.
                viewPDF = false;
    Many thanks in advance
    Mac

    I've redrawn it all and placed in new images and now its starting to do weird stuff like make the images disappear as well as making part of the transparency 20% (as set by me) but then making another section of it 100%.(See below - top one is correct, bottom is incorrect). I would agree with you that it may just be an issue with the file, except its happening across multiple computers. There's not really any chance its a dud version of CS5 is there? Its all legit so no real reason why it wouldn't be.
    Override Master Pages fixes it, but this is pretty disappointing if I need to have to do this every single time as it makes the master pages on half useful.
    We do have CS3 actually and I opened it in that, exported it as a .inx but same issue with elements missing - the stroke around the outside disappeared.
    Could it be anything to do with bringing across elements from Illustrator? Although the top element is appearing fine, and the bottom transparent element is a copied item so shouldn't be an issue. And the image disappearing - there's no real reason for that.

  • CS3: PDF-Export Transparency Issue when Image-Links are missing

    I have a Layout with a transparent Frame on the top most Layer. For this Workflow-Step I do not have access to the original Image-Links, so I guess that all I see are the embedded Preview-Pictures and InDesign reports that all Object-Links are missing.
    If I export this Layout as JPG, the resulting JPG looks like the WYSIWYG in InDesign, which is suitable for this workflow-step. However when I export as pdf, the Frame is not transparent anymore. Instead it is filled with white color and covers the rest of the Layout. In Adobe Reader I can actually select the wrongly covered Picture at the border of the frame and copy&paste it somewhere and it looks fine.
    When I provide the original Frame-Picture and repair the missing Link in InDesign, PDF-Export works fine.
    I have installed & updated InDesign on a new Mac OS X 10.4.11, so all settings should be default.
    Transparency Blend Space is set to CMYK. I tried all default PDF-Export Profiles and tried a lot of different settings in the pdf-export dialogue including different PDF-File-Versions, Simulate Overprint on/off, Color-Conversion disabled, disabling Picture-Compression and much more. I also tried to Print a PS-File and then use the Distiller: same result.
    I use Adobe InDesign CS3 V 5.0.2 and tried Adobe Reader 8.1.2 and Adobe Acrobat Pro 8 to display.
    Any Ideas?

    Transparency flattening REQUIRES having access to the high-resolution images to get good results. One of the slogans I teach printers is "Fatten before you flatten." Meaning, replace the low-res images with high-res images.

  • Fonts Not Embedding Consistently with PDF Export - Inconsistent Fix and Unknown Cause

    I have had ongoing problems with PDF export from FrameMaker. Sometimes the correct fonts do not embed in the PDF and Times New Roman is substituted. The problem appears and disappears and is causing me a lot of lost time and frustration.
    I am running FrameMaker 9.0 fully patched on Windows 7 Ultimate 64-bit. I have seen people complain about this issue and am familiar with the suggested fixes. However, the exact cause and solution eludes me because the problem continues to recur and I am only able to recover with guesswork and workarounds.
    Initially I did the following:
    ACROBAT PDF SETTINGS
    - In the printer properties for Adobe PDF settings I turned off the option "Rely on system fonts only; do not use documents fonts."
    ACROBAT DISTILLER SETTING
    Under "Font" Settings I changed the following:
    - Under "Settings/Font Locations" I added the font folder for Technical Communication Suite 2.0 and made sure all the fonts existed there and in the Windows default font directory.
    - Under "Settings/Edit Adobe PDF Setting/Fonts" I changed the following options:
                - Selected "Embed all fonts"
                - Under "Embedding" chose "Always Embed" for the target fonts.
    I tweaked these settings for hours and got no results. Then I rebooted and the problem had magically disappeared. I fixed the issue in the same way on another machine and the results were permanent and I was just happy to finally have it fixed, But this time it didn't last.
    I should note that upon reboot, when I used the stock "PDF Job Options," the correct fonts still embedded, leading me to believe that the fix had nothing to do with the changes I made to Distiller settings.
    After reboot I generated PDFs with the correct fonts embedded. Then I shut down FM, but left the system running. The next morning I opened FM again and the same problem occurred.
    So I rebooted again -- and the problem disappeared again. I therefore thought maybe the issue fixes on reboot but recurs when you shut down FM and reopen. So I shut down FM again and reopened, but it is still working fine for the moment.
    I verified that the Adobe PDF settings under "Printers & Devices" that I turned off (Rely on system fonts only; do not use documents fonts) remained correctly unchecked through all these changes.
    I would really like to know why this happens so I can resolve it permanently and avoid more lost time.
    Thanks in advance,
    Douglas

    The common theme I'm seeing here is that the setting edits you make in
    Distiller through the FM "Save As PDF" option don't seem to take effect.
    Do you know if that is true or could you elaborate on the notorious nature
    of this method for me?
    >
    There are too many potential and transient problems to list. The only thing
    I can say is that I've been an active member of the FrameUsers listserv
    (http://lists.frameusers.com/mailman/listinfo/framers) since FM version 6.0,
    circa 2001, and probably 95% of the PDF problems reported there have been
    fixed simply by using print to Adobe PDF (or to Acrobat Distiller in older
    PDF versions), instead of using Save as PDF. Common advice there has always
    been to avoid Save as PDF and even some Adobe employees have recommended
    against using it. It doesn't matter which FM version.
    The once-busy FrameUsers listserve has been fading away, recently, as this
    new Adobe forum software allows reading via e-mail, and attachment of
    screenshots.  Even if you look around on this forum now, you'll probably
    find that there are two main fixes for issues with PDF. One is NOT using
    Save as PDF, which seems to fix a whole bunch of issues. The other is the
    use of a Windows hotfix to squash a Windows OS bug that causes dropped
    characters in PDFs.
    In the rare instances that someone has issues with printing to PDF, they are
    almost always related to errors in settings. Or occasionally someone can't
    embed fonts because they are trying to the embed the virtual fonts that come
    with their printer driver instead of fonts that have actually been installed
    on their computer. (The fonts are hard-wired on their printer, so the system
    can use them but not embed them.)

  • InDesgin 6 PDF Export, File size weirdness

    Hello
    ive been exporting Docs from inDesign CS5 for ages
    simple enough - hi quality print, no downsampling, jpeg-hi quality,
    PDF usually comes out about 4MB
    So i open the same files in inDesign 6
    set my PDF export to above settings, but my PDFs are 14MB
    ive been tweaking CS6 PDF export settings for ages now.
    its always too big unless i go way overboard with downsampling
    then i get a small (but crappy) PDF
    any help advice appreciated....

    @Arinkah:
    Quite a bit of work has been done for InDesign 8 (CS6) to further optimize the generated PDF compared with earlier versions of InDesign, especially if you have graphics on master pages.
    @Megumi2:
    Unless we have the actual sample files to look at, we can't speculate as to the anomalies you see. It isn't our experience and we don't know what could be causing what you are seeing as files 350% larger than previously generated. No, we didn't have any JPEG compression change that would account for this assuming you used the exact same JPEG (Automatic) settings.
              - Dov

  • Keynote PDF Export and Color Profile

    I have some color trouble with the pdf-exports of keynote: the color that is shown in the pdf does not correpond with the one in the keynote file. The pdf has more ”milky” colors. Maybe it is a color profile thing. But what profile doese keynote use for the screen? Or does it convert rgb-colors to cmyk? Anyway, how to sync exactly keynote and pdf colors for screen presentations?

    There are a few things you can try:
    In the PDF export box there is an Image Quality dropdown, where you can choose Good, Better or Best. Which are you using?
    Alternatively you can just output the file as a PDF using the Print function. Your profile says you are using Mac OS X 10.4 in which case, in the print window click on the PDF button and choose Compress PDF to output a smaller file.
    If you have since moved up to 10.5, this option is no longer available by default, but there is an Automator action that restores it here : http://www.apple.com/downloads/macosx/automator/compresspdfworkflow.html
    The other thing to check is whether your graphics are at the actual size you need them or if you have scaled down a big picture, for example. The PDF will still contain information for the full-size image.
    Re-sizing them in something like Photoshop to the size you need first before placing them in the presentation may help.
    Finally, if you have Acrobat (Pro, not just the reader) you can use the Reduce File Size option in the FIle menu to compress the PDF you get from Keynote.
    Post back with how you get on.

  • Keynote pdf export

    Hi I am creating a graphic intensive presentation in Keynote, and wish to export this to i-web for an upload. How do I reduce the size of the export as a PDF. I have tried to drag the PDF export into photoshop but it splits all the frames out and i cannot reduce the doc as a whole. I have built in some hyperlinks and wish to keep them

    There are a few things you can try:
    In the PDF export box there is an Image Quality dropdown, where you can choose Good, Better or Best. Which are you using?
    Alternatively you can just output the file as a PDF using the Print function. Your profile says you are using Mac OS X 10.4 in which case, in the print window click on the PDF button and choose Compress PDF to output a smaller file.
    If you have since moved up to 10.5, this option is no longer available by default, but there is an Automator action that restores it here : http://www.apple.com/downloads/macosx/automator/compresspdfworkflow.html
    The other thing to check is whether your graphics are at the actual size you need them or if you have scaled down a big picture, for example. The PDF will still contain information for the full-size image.
    Re-sizing them in something like Photoshop to the size you need first before placing them in the presentation may help.
    Finally, if you have Acrobat (Pro, not just the reader) you can use the Reduce File Size option in the FIle menu to compress the PDF you get from Keynote.
    Post back with how you get on.

  • Terrible Graphic Quality with PDF Export from FM9

    I'm using FM9 unpatched on Windows XP Pro.
    I cannot get the PDF export to work properly with graphics. Everything else looks great in general, but the graphics lose quality, both upon import into FM and even more so upon PDF export.
    I have tried every option for importing, both working with native files (ex. .ai) and with JPEG or other format exports, as well as importing the files themselves directly and importing by reference.
    I have also tried tweaking the PDF "Image" settings, removing any and all compression to see if it would help, which it did not.
    In the end, the best results actually come from imported JPEG files, which are a bit blurry, but (relatively) usable, considering the alternatives. The Illustrator files I want to use are just awful, they are completely bitmapped upon export to PDF.
    It is also worth noting that I do not encounter this problem when using the FM drawing tools. The output of those graphic files on printer and in PDF is excellent, vector-quality art.
    I find it unusual that I am having this problem and see no other mention of it in the forums. It is causing serious pain and delays on my project, so if someone has any insight, it would be greatly appreciated.
    Douglas

    First and foremost, you mention using FM unpatched, but you don't mention any specific reason you haven't applied the patches, can you elaborate on that? What version are you running, then?  The latest version is 9.03 aka p250, as shown in Help > About.
    There were several fixes to PDF generation in both the .02 and .03 update, so that would be the #1 recommendation.
    Second thing is to tell us
    1)  how you're creating the PDFs, are you using Save As or are you printing to a print file,
    2) what printer do you have set as your default printer (in FM) when you create the PDF
    Sheila

  • Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close

    I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
    When I drop folder with indesign files on top of this script:
    1. opens first page
    2. turns specific layer on
    3. prints using preset
    4. exports using preset
    5. close without saving
    6. next page
    Anyone who can give me solution or idea how this should work is greatly appreciated.
    on open sourceFolders
    repeat with sourceFolder in sourceFolders
    tell application "Finder"
    try
    -- If you would like to include subfolders, you say - every file of entire contents of folder…
    set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
    on error -- work around bug if there is only one file
    set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
    end try
    end tell
    if idFiles is not {} then
    tell application "Adobe InDesign CS4"
    set user interaction level to never interact
    repeat with i from 1 to count of idFiles
    open item i of idFiles
    tell document 1
    try
    set visible of layer "ImagesTag_Layer" to true
    end try
    set myPreset to "letter size" -- name of print style to use
    with timeout of 700 seconds
    print using myPreset without print dialog
    end timeout
    set myPreset1 to "pdf preset name" -- name of pdf export style to use
    set myName to the name -- name includes .indd should remove at some point          
    with timeout of 700 seconds
    export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
    end timeout
    close without saving
    end tell
    end repeat
    set user interaction level to interact with all
    end tell
    end if
    return 10 -- try again in 10 seconds
    end repeat
    end open

    (Disclaimer: me not an AS guy!)
    First thing I noticed is the interaction level is set off. If you comment out this line
    set user interaction level to never interact
    you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
    A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
    set myPreset to "letter size" -- name of print style to use
    set myPreset1 to "pdf preset name" -- name of pdf export style to use 
    Do these actually exist in your CS4, with the same (non)capitalization and spaces?

  • Single letters dropping out in PDFs exported from Indesign CS

    We are having font issues in some of our magazine's advertisements which proved very costly last month. First let me describe the work flow.
    We designed an ad in Indesign CS then exported it using the press setting in Indesign's PDF export option. Here the ad looked and printed fine. The ad was then placed in another Indesign file which was for the layout of one of our magazines. Here the ad still looked fine on screen and when printed out from Indesign. This next step is where the font issue occurs.
    When we export the the final magazine's press ready Indesign file, through the PDF press setting in Indesign again, single letters in these problem ads drop out. For example all of the Ds' in the entire ad will be missing. So a sentence in the ad that read "Dirt is Dark" will read " irt is  ark." 
    I am wondering if anyone else has had this problem occur and if they have a solution. The only thing I can think of is in the compression settings there is an option to compress text and line art. We are going to try to uncheck that box to see if it fixes the problem.
    Thank you for you help,
    Javin.

    I realized, of course, that it does make a difference. If you don't have the fonts on your system, a frequent issue with incoming ads, you couldn't embed the full font at all. You need to be sure that ads generated in CS have fully embedded fonts, not subsets, or risk dropouts. It will only happen when more than one ad uses the same font, but different glyphs.

  • PDFs exported from InDesign cannot be printed

    Our Marketing Manager is using Adobe InDesign and exports her documents to PDF. These PDFs won't print in any of our printers in the office. It spools and then gets stuck and it actually makes our HP Coloured Laser Printer throw an error (error 79) and we'll have to restart the printer due to this error. We can print other documents and other PDFs in the printer so we know it's not a printer driver issue. In fact, we have isolated the problem to only PDFs exported from InDesign. Even if we create a blank document or add just text from InDesign and export it to PDF it still won't print. Really odd.
    **I also posted this in the InDesign thread but was asked to post it here too. I tried printing the document using Adobe Acrobat and Adobe Reader with no luck. We tried printing directly from InDesign but it is inconsistent, sometimes it will print but most of the time it does not.

    Hmm. Yeah. The ID forum may be more help. Especially if it's also a problem in ID.
    My first suspect would be corrupt fonts or possibly an image file. Can you create a blank ID file with no text (maybe insert just an image or something that isn't on any of the other ID files) pdf it and print it?

  • JRE Crash with 1.5.0_13 related to printing & PDF export

    Hi,
    I'm having a problem : JRE 1.5.0 (updates 6, 10 and 13 tried) crashes under my software. The problem is encountered with printing / PDF exporting functionality through JFreeReport. Issue is encountered only with dualcore computers. Fortunately the issue isn't encountered with 1.6.0 anymore but I'd still be interested to find some workaround to make the software run with 1.5.0 also (It would be nice not to require users to have 1.6.0) Problem has been detected with both Win XP SP 2 and Vista.
    First I was suspicious because we are using one JNI library but removing that didn't help so that shouldn't be the case.
    After some searching I found a couple of JVM bugs that were marked as duplicates for http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6186524 . Those were related to 2D things and hence printing, fonts, exporting and with some cases dualcore computers were mentioned. However, that bug should be fixed in 1.5.0_10 but upgrading to 1.5.0_10 (or 1.5.0_13) didn't help so it can't be the actual bug.
    Error log, if somebody can make up something: (This error log was got when running through Eclipse with JRE set to 1.5.0_13 but error has been encountered also when running straight with just one JRE (1.5.0_XX) installed to computer.)
    # An unexpected error has been detected by HotSpot Virtual Machine:
    #  EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x762369e6, pid=5312, tid=5188
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_13-b05 mixed mode)
    # Problematic frame:
    # C  [MSCTF.dll+0x69e6]
    ---------------  T H R E A D  ---------------
    Current thread (0x0b3f61d8):  JavaThread "AWT-Windows" daemon [_thread_in_native, id=5188]
    siginfo: ExceptionCode=0xc0000005, reading address 0x580e0e0e
    Registers:
    EAX=0x580e0e0e, EBX=0x00129f40, ECX=0x0b53f288, EDX=0x01300311
    ESP=0x0b53f24c, EBP=0x0b53f250, ESI=0x0b53f288, EDI=0x00123970
    EIP=0x762369e6, EFLAGS=0x00010202
    Top of Stack: (sp=0x0b53f24c)
    0x0b53f24c:   80004005 0b53f28c 76239ae4 580e0e0e
    0x0b53f25c:   00152fe0 00123970 76236704 00140d70
    0x0b53f26c:   013003f1 00000000 00000000 762367c8
    0x0b53f27c:   001ba198 0b8400ec 00000000 580e0e0e
    0x0b53f28c:   0b53f2d0 762391cd 00153118 00000000
    0x0b53f29c:   00129f40 00123970 764d37c0 0b53f6b8
    0x0b53f2ac:   764c5ac9 764d8f11 fffffffe 764d37c0
    0x0b53f2bc:   762367f0 0b8400e4 0b53f2d8 7623689f
    Instructions: (pc=0x762369e6)
    0x762369d6:   ff 55 8b ec 8b 45 08 85 c0 56 8b f1 89 06 74 06
    0x762369e6:   8b 08 50 ff 51 04 8b c6 5e 5d c2 04 00 90 90 90
    Stack: [0x0b500000,0x0b540000),  sp=0x0b53f24c,  free space=252k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C  [MSCTF.dll+0x69e6]
    C  [MSCTF.dll+0x9ae4]
    C  [MSCTF.dll+0x91cd]
    C  [MSCTF.dll+0x9bec]
    C  [MSCTF.dll+0x8e6f]
    C  [IMM32.DLL+0x3472]
    C  [USER32.dll+0x199cd]
    C  [USER32.dll+0x18e4c]
    C  [USER32.dll+0x18de1]
    C  [USER32.dll+0x19132]
    C  [USER32.dll+0x21a10]
    C  [USER32.dll+0x21ae8]
    C  [USER32.dll+0x21c03]
    C  [USER32.dll+0x23656]
    C  [ntdll.dll+0x60e6e]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j  sun.awt.windows.WToolkit.eventLoop()V+0
    j  sun.awt.windows.WToolkit.run()V+69
    j  java.lang.Thread.run()V+11
    v  ~StubRoutines::call_stub
    ---------------  P R O C E S S  ---------------
    Java Threads: ( => current thread )
      0x0c077b28 JavaThread "export-worker--0" daemon [_thread_in_native, id=6032]
      0x0c0779a0 JavaThread "Repagination-Worker" daemon [_thread_blocked, id=6016]
      0x0c077818 JavaThread "Thread-20" [_thread_blocked, id=4740]
      0x0bf45428 JavaThread "Timer-0" daemon [_thread_blocked, id=4456]
      0x0bfee410 JavaThread "GC Daemon" daemon [_thread_blocked, id=4368]
      0x0bfee288 JavaThread "RMI RenewClean-[192.168.1.155:49177]" daemon [_thread_blocked, id=5460]
      0x00f718a0 JavaThread "DestroyJavaVM" [_thread_blocked, id=5212]
      0x0bfcba50 JavaThread "TimerQueue" daemon [_thread_blocked, id=4704]
      0x0b49d470 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=2696]
      0x0b4a6288 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=632]
    =>0x0b3f61d8 JavaThread "AWT-Windows" daemon [_thread_in_native, id=5188]
      0x0b3f6050 JavaThread "AWT-Shutdown" [_thread_blocked, id=3368]
      0x0103ef78 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=416]
      0x0103e338 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1216]
      0x0103d9b0 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=5592]
      0x010333e8 JavaThread "Finalizer" daemon [_thread_blocked, id=4820]
      0x01030e10 JavaThread "Reference Handler" daemon [_thread_blocked, id=4144]
    Other Threads:
      0x0102be10 VMThread [id=936]
      0x00fd8ba8 WatcherThread [id=1316]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation   total 2304K, used 1239K [0x03100000, 0x03370000, 0x035e0000)
      eden space 2112K,  49% used [0x03100000, 0x03205da8, 0x03310000)
      from space 192K, 100% used [0x03340000, 0x03370000, 0x03370000)
      to   space 192K,   0% used [0x03310000, 0x03310000, 0x03340000)
    tenured generation   total 29228K, used 24017K [0x035e0000, 0x0526b000, 0x07100000)
       the space 29228K,  82% used [0x035e0000, 0x04d544d0, 0x04d54600, 0x0526b000)
    compacting perm gen  total 15616K, used 15552K [0x07100000, 0x08040000, 0x0b100000)
       the space 15616K,  99% used [0x07100000, 0x08030000, 0x08030000, 0x08040000)
    No shared spaces configured.
    Dynamic libraries:
    0x00400000 - 0x0040d000      C:\Program Files\Java\jre1.5.0_13\bin\javaw.exe
    0x776b0000 - 0x777ce000      C:\Windows\system32\ntdll.dll
    0x764b0000 - 0x76588000      C:\Windows\system32\kernel32.dll
    0x76660000 - 0x7671f000      C:\Windows\system32\ADVAPI32.dll
    0x777f0000 - 0x778b3000      C:\Windows\system32\RPCRT4.dll
    0x76980000 - 0x76a1e000      C:\Windows\system32\USER32.dll
    0x76b90000 - 0x76bdb000      C:\Windows\system32\GDI32.dll
    0x76360000 - 0x7640a000      C:\Windows\system32\MSVCRT.dll
    0x76b70000 - 0x76b8e000      C:\Windows\system32\IMM32.DLL
    0x76230000 - 0x762f7000      C:\Windows\system32\MSCTF.dll
    0x764a0000 - 0x764a9000      C:\Windows\system32\LPK.DLL
    0x76720000 - 0x7679d000      C:\Windows\system32\USP10.dll
    0x10000000 - 0x10017000      C:\Windows\system32\APSHook.dll
    0x6d640000 - 0x6d7dd000      C:\Program Files\Java\jre1.5.0_13\bin\client\jvm.dll
    0x752d0000 - 0x75303000      C:\Windows\system32\WINMM.dll
    0x76a20000 - 0x76b64000      C:\Windows\system32\ole32.dll
    0x76170000 - 0x761fc000      C:\Windows\system32\OLEAUT32.dll
    0x75290000 - 0x752c8000      C:\Windows\system32\OLEACC.dll
    0x75da0000 - 0x75dcc000      C:\Windows\system32\apphelp.dll
    0x6d290000 - 0x6d298000      C:\Program Files\Java\jre1.5.0_13\bin\hpi.dll
    0x75f60000 - 0x75f67000      C:\Windows\system32\PSAPI.DLL
    0x6d610000 - 0x6d61c000      C:\Program Files\Java\jre1.5.0_13\bin\verify.dll
    0x6d310000 - 0x6d32d000      C:\Program Files\Java\jre1.5.0_13\bin\java.dll
    0x6d630000 - 0x6d63f000      C:\Program Files\Java\jre1.5.0_13\bin\zip.dll
    0x6d000000 - 0x6d16a000      C:\Program Files\Java\jre1.5.0_13\bin\awt.dll
    0x734b0000 - 0x734f1000      C:\Windows\system32\WINSPOOL.DRV
    0x74b80000 - 0x74bbf000      C:\Windows\system32\uxtheme.dll
    0x003e0000 - 0x003f8000      C:\Program Files\Hewlett-Packard\IAM\bin\ItClient.dll
    0x76300000 - 0x76355000      C:\Windows\system32\SHLWAPI.dll
    0x74f50000 - 0x750e4000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6000.16386_none_5d07289e07e1d100\comctl32.dll
    0x74ec0000 - 0x74f46000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\Comctl32.dll
    0x71cb0000 - 0x71cbc000      C:\Windows\system32\dwmapi.dll
    0x76be0000 - 0x776ae000      C:\Windows\system32\shell32.dll
    0x6d240000 - 0x6d290000      C:\Program Files\Java\jre1.5.0_13\bin\fontmanager.dll
    0x6d4d0000 - 0x6d4e3000      C:\Program Files\Java\jre1.5.0_13\bin\net.dll
    0x76200000 - 0x7622d000      C:\Windows\system32\WS2_32.dll
    0x777e0000 - 0x777e6000      C:\Windows\system32\NSI.dll
    0x755e0000 - 0x7561b000      C:\Windows\system32\mswsock.dll
    0x75640000 - 0x75646000      C:\Windows\System32\wship6.dll
    0x6d4f0000 - 0x6d4f9000      C:\Program Files\Java\jre1.5.0_13\bin\nio.dll
    0x6d3d0000 - 0x6d3ef000      C:\Program Files\Java\jre1.5.0_13\bin\jpeg.dll
    0x75360000 - 0x75398000      C:\Windows\system32\rsaenh.dll
    0x75e20000 - 0x75e3e000      C:\Windows\system32\USERENV.dll
    0x75e00000 - 0x75e14000      C:\Windows\system32\Secur32.dll
    0x74a70000 - 0x74a7f000      C:\Windows\system32\NLAapi.dll
    0x75800000 - 0x75819000      C:\Windows\system32\IPHLPAPI.DLL
    0x757c0000 - 0x757f5000      C:\Windows\system32\dhcpcsvc.DLL
    0x75ac0000 - 0x75aeb000      C:\Windows\system32\DNSAPI.dll
    0x757b0000 - 0x757b7000      C:\Windows\system32\WINNSI.DLL
    0x75790000 - 0x757b0000      C:\Windows\system32\dhcpcsvc6.DLL
    0x727e0000 - 0x727e8000      C:\Windows\System32\winrnr.dll
    0x76930000 - 0x76979000      C:\Windows\system32\WLDAP32.dll
    0x727d0000 - 0x727df000      C:\Windows\system32\napinsp.dll
    0x72070000 - 0x72082000      C:\Windows\system32\pnrpnsp.dll
    0x727c0000 - 0x727cc000      C:\Windows\system32\wshbth.dll
    0x767a0000 - 0x76928000      C:\Windows\system32\SETUPAPI.dll
    0x75220000 - 0x75226000      C:\Windows\System32\wshtcpip.dll
    0x728d0000 - 0x728d6000      C:\Windows\system32\rasadhlp.dll
    0x6d1c0000 - 0x6d1e3000      C:\Program Files\Java\jre1.5.0_13\bin\dcpr.dll
    0x6d5f0000 - 0x6d5f6000      C:\Program Files\Java\jre1.5.0_13\bin\rmi.dll
    0x0b990000 - 0x0b9a1000      C:\Eclipse workspace\fenix\lib\ICE_JNIRegistry.dll
    0x760f0000 - 0x76164000      C:\Windows\system32\COMDLG32.DLL
    0x71610000 - 0x71617000      C:\Windows\system32\spool\DRIVERS\W32X86\3\SDNT5UI.DLL
    0x0bac0000 - 0x0bad2000      C:\Windows\system32\spool\DRIVERS\W32X86\3\SDDM32.DLL
    0x71130000 - 0x71145000      C:\Windows\system32\spool\DRIVERS\W32X86\3\ZSPOOL.dll
    0x710e0000 - 0x710ea000      C:\Windows\system32\spool\DRIVERS\W32X86\3\ZGDI32.dll
    0x70810000 - 0x70821000      C:\Windows\system32\MSVCRT40.dll
    0x715d0000 - 0x715da000      C:\Windows\system32\spool\DRIVERS\W32X86\3\ZTAG32.dll
    0x75650000 - 0x75658000      C:\Windows\system32\VERSION.dll
    0x71060000 - 0x71080000      C:\Windows\system32\spool\DRIVERS\W32X86\3\SDDMUI.DLL
    0x0bae0000 - 0x0bae7000      C:\Windows\system32\spool\DRIVERS\W32X86\3\ZLANG.dll
    0x0bbc0000 - 0x0bbe4000      C:\Windows\system32\spool\DRIVERS\W32X86\3\SR32.dll
    0x0bb70000 - 0x0bb7d000      C:\Windows\system32\spool\DRIVERS\W32X86\3\IMFNT5.DLL
    0x71600000 - 0x71608000      C:\Windows\system32\spool\DRIVERS\W32X86\3\Imf32.dll
    0x76410000 - 0x76494000      C:\Windows\system32\CLBCatQ.DLL
    0x6de10000 - 0x6e033000      C:\Windows\system32\NetworkExplorer.dll
    0x742c0000 - 0x74377000      C:\Windows\system32\PROPSYS.dll
    0x76590000 - 0x7665f000      C:\Windows\system32\WININET.dll
    0x777d0000 - 0x777d3000      C:\Windows\system32\Normaliz.dll
    0x75f70000 - 0x75fb5000      C:\Windows\system32\iertutil.dll
    0x759a0000 - 0x759b4000      C:\Windows\system32\MPR.dll
    0x71940000 - 0x71952000      C:\Windows\System32\ntlanman.dll
    0x75a50000 - 0x75aba000      C:\Windows\System32\NETAPI32.dll
    0x71a00000 - 0x71a08000      C:\Windows\System32\drprov.dll
    0x719d0000 - 0x719df000      C:\Windows\System32\davclnt.dll
    0x734a0000 - 0x734aa000      C:\Windows\system32\cscapi.dll
    0x707e0000 - 0x707e9000      C:\Windows\system32\LINKINFO.dll
    0x6c460000 - 0x6c519000      C:\Windows\system32\spool\DRIVERS\W32X86\3\unidrvui.dll
    0x6bdd0000 - 0x6be8b000      C:\Windows\system32\spool\DRIVERS\W32X86\3\mxdwdrv.dll
    0x6c350000 - 0x6c365000      C:\Windows\system32\FontSub.dll
    VM Arguments:
    jvm_args: -Djava.library.path=c:/Eclipse workspace/fenix/lib -Xbootclasspath/a:C:\Eclipse workspace\fenix\rsrc\images\buttons;C:\Eclipse workspace\fenix\rsrc\images\buttons\general;C:\Eclipse workspace\fenix\rsrc\images\buttons\report
    java_command: XXX
    Launcher Type: SUN_STANDARD
    Environment Variables:
    PATH=C:\Program Files\Java\jre1.6.0_03\bin\client;C:\Program Files\Java\jre1.6.0_03\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;c:\Program Files\ATI Technologies\ATI.ACE\Core-Static;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;c:\Program Files\Common Files\Roxio Shared\DLLShared\;c:\Program Files\Common Files\Roxio Shared\DLLShared\;c:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program Files\Hewlett-Packard\IAM\bin
    USERNAME=XXX
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 72 Stepping 2, AuthenticAMD
    ---------------  S Y S T E M  ---------------
    OS: Windows Vista Build 6000
    CPU:total 2 (cores per cpu 2, threads per core 1) family 15 model 72 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, mmxext, 3dnowext, 3dnow
    Memory: 4k page, physical 1964736k(863916k free), swap 4159556k(2569432k free)
    vm_info: Java HotSpot(TM) Client VM (1.5.0_13-b05) for windows-x86, built on Sep 25 2007 19:11:52 by "java_re" with MS VC++ 6.0

    This looks like [bug 6754141|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6754141] in the just-in-time compiler. If you have a support contract you can escalate this to get a fix in a jdk1.5.0 update. Alternatively, there do not seem to be any reports of this in jdk6, so you could try a recent jdk6 update (e.g., jdk6 update 17).

  • Windows vista ultimate 64 bit PDF export error

    Hi there, I'm using diadem 11.0 and  i have a big problem with my new os.
    When i try to export a report in pdf i get a print error in the status of the "diadem pdf export" printer.
    Any idea or solution for fix this problem ?
    Solved!
    Go to Solution.

    Thanks for the support Brad, i have tried to download and install diadem 11.1 but  it didn't solve the problem.
    After that i've tried to search in the amyuni forum for a solution and i found out this (it solved my problem)
    Windows Vista:
    Make sure that you are logged in as Windows administrator.
    Click the Windows button and click Printers.
    Right-click the Diadem pdf Export and select Properties
    Click the Ports tab, then click the Add Port button.
    Note: If the Ports tab is greyed out, right-click the Diadem Pdf Export icon and select Run as admin.
    Select Local Port and click the New Port button.
    Enter PDF1 for the new port name and click OK. Close the Printer Ports window.
    Put a checkmark in the box next to the PDF1 port if it is not already checked.
    Click on the Advanced tab.
    Select the Spool print documents radio button to make the options below it clickable.
    Clear (uncheck) the box labeled Enable advanced printing features by clicking it.
    Select the Print directly to printer radio button to make the options below not clickable.
    Click the Apply button, then click OK.
    Important: In order for the changes to take effect, you must restart your computer.
    Reboot your computer and then try to print, email, or create a pdf from Diadem.
    Regards,
    Ierman Gert

  • PDF Export Looks Good at 150% Zoom, but Bad on 100%

    Hi,
    I'm extremely new to InDesign, and am trying to make a colourful resume/portfolio design using ID, but am running into an issue already with exporting via PDF.
    The original issue was that the logo (which has my name and occupation(s)) were coming out SUPER blurry as a PSD I "placed" in the ID document (I tried PNG and Photoshop PDF as well, to no improvement).  After a lot of struggling with export options, I went back to PhotoShop and changed the PSD from 72 ppi to 300 ppi, which increased the dimensions of the PSD but improved the quality significantly. 
    However, now I find that the PDF file looks great in Acrobat on larger zooms (150% and 200%), but bad on 100% (where it seems like it's being "downscaled," so the smaller text looks awfully compressed).  I've experimented with ppi's in between (240, 180, etc), but it ends up becoming "blurry" at 100%, like the 72 ppi setting.
    Any ideas on how I can fix this so the logo looks crisp at 100% on a PDF export?
    Thanks,
    RTL
    Image (full-size): http://www.starrcadia.com/logo2.png

    Hi Willi,
    I tried a PNG once earlier (when I was still trying to fix the 72 ppi logo), but since it had no improvement, I abandoned the PNG way before (it's a PSD in those screenshots above).
    The PSD is still layered in Photoshop.  I took your advice and imported it into Illustrator, and saved as an AI file, and then placed that in the ID, but it wasn't an improvement.  I notice that everything (including text I wrote in ID) looks far superior on 150% zoom in Acrobat, and perfect on 200%, but 100% seems to downscale all of the content (except the background).
    Thanks!   

Maybe you are looking for

  • XML support in SAP 4.6

    Hi all ! I'm looking for information about XML support in SAP 4.6c. I have to implement a data exchange mechanism between SAP and web application written in Java. Whole idea looks simple: Java application send an XML document through RFC and ABAP pro

  • F.5 valuation of the open item...Customers, vendors.....etc...

    Hi Dear Friends, In our company, we have different Reconciliation acct. for different supplier and customer. but in our system we have only one valuation acc. number for supplier and one valuation acc.number for customer. I want to create valuation a

  • Report server url

    I am trying to find the Report Server url for my SSRS reports. Please help. I am trying to connect a SSRS report to a windows forms application in visual studio 2010 using VB, not C#. thank you in advanced. Dan Dan Wojtasiewicz

  • How can I avoid additional copy of all Music files?

    Hi Everybody.... I just purchased a new iPod 80Gb... I hope to transfer all my music and audiobooks from computers, HDD's and CD's to it. That is about 30-40Gb. Unfortunately I discovered I can not do this without iTunes or other 3rd party software a

  • IW45 - Cancel Confirmation - Posting period query

    Hi Experts, I am executing IW45 and while saving it says that Cancellation of completion confirmation STOPPED due to MM period closed . As per my knowledge Time confirmation generates only financial document so why it is giving an error because of MM