PDF export maintaining vectors
Hi,
Been looking everywhere on the web for a solution to this. Is it possible to export a PDF from Fireworks and maintain the vector compression instead of bitmap compression? To have a legible file when printed I am having to upscale the res to 300DPI and this creates massive PDFs when compressed with bitmaps.
Looked at exporting in different formats and importing into other vector software (i.e. Illustrator) but this does seem a lot off grief just to have a vector export.
Any help/advice would be very helpful.
Thanks
Graham
Fireworks doesn't support vector compression in it's PDF export at this time. All I can suggest is to submit this as a feature request to the wishlist, which - ironically - is not working right at this moment.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Similar Messages
-
PDF export causes text to be pixelated
Greetings.
I am trying to export a vector graphic to PDF. The document contains only vector shapes and some text (not rasterized), set to anti-aliased Crisp.
But no matter what options I choose, the text comes out pixelated.
I increased the dpi from 96 to 300. That didn't work.
I went to File - Print. There are two options to export a PDF:
I can click Print again on the subsequent dialog, then opt to export to PDF. That didn't work.
Or I can click the "Print Settings" button, from which I can then export to PDF. That didn't work.
I tried opening the Photoshop file in Gimp then saving that as a PDF. That didn't work.
I tried every possible option in File - Save As. I selected Photoshop PDF, but after 30 minutes of trial and error, I was unable to locate a combination that gave me the PDF I desired. In all cases, even uncompressed, the text is pixelated.
When I searched the Adobe support site, I couldn't find any results that matched what I needed.
What's going on?? How do I just get a normal PDF out of all of these options??
Mac OS X 10.7.3
Photoshop CS 6 beta
Also, some general questions:
[1] I am confused by the layout of the forums: http://forums.adobe.com/community/photoshop
Usually when I think "forum" I see a bunch of threads, categories, and names of posters. Instead this reads more like an FAQ and I feel like I'm asking a brick wall. I'm following the links exactly to "Photoshop forums," but then when it tells me to ask my question, I do so, but then I just get 2 irrelevant results and I can't ask anyone. Where am I supposed to go to get help? I'm so lost browsing this site. Did you want me to start a "discussion" rather than a "thread"? Because I would think that a "discussion" implies that I know what I'm talking about and am conducting/moderating my own meeting (which I'm not, no sarcastic remarks I'm stressed out and just need a simple answer but I have no idea how I'm supposed to ask my question when it says "Ask a question..." I reach a dead end and the site doesn't give me a Step 2 suggestion).
[2] Also: The site seems to load slowly. It takes several extra seconds for pages to load, and by then, I usually refresh the page, which confuses me because then I end up like 2 pages back.
[3] And: Adobe tells me that "andrejfavia" is taken. Who took my username? Was it me from like 5 years ago, or does someone else have the same name? It's been so long.andrejfavia2 wrote:
And since no one has replied back to me, I'm guessing that the average user doesn't even know how to do something basic like export a vector PDF from graphics with text,
it seems so.. as you don´t know how to do it.
sorry i can´t help im a photo guy and i think i have never touched PDF in photoshop.
andrejfavia2 wrote:
What are you people doing?? This is such a tortorous user interface!!
yep especially that copy and paste is not working via mouse annoys me. i only get the "insert, image link" stuff on my right mouse button.... and i don´t need that as often as copy & paste.
the quote function is not very good either, compared with other forum software. -
How do I set a PDF Export Preset to force a minimum line weight on output?
How do I set a PDF Export Preset to force a minimum line weight on output? I'm currently using one that came from a printer that works great - but I can't seem to find the option when creating one myself. I have some placed Illustrator line art that is built with .25 line thickness and when I have it placed at 20% scale the lines are too thin to see in the PDF output.
There is absolutely no way to force minimum line widths within InDesign itself, certainly not as part of the PDF export process!! And even one writes a script to go through every object within an InDesign document and both validate and fix line widths less than some particular threshold, such a script would be useless against placed artwork, the contents of which are not available for manual or programmatic inspection within InDesign.
Note that one should be exceptionally careful in “fixing” hairlines, especially if you are placing vector artwork at very low magnification. It may actually be OK to let certain lines drop out. After a fixup on some content, you could end up with a messy mass of lines.
- Dov -
Aliased text on PDF export with blending modes
So I've had this issue with a pdf, I tried to export it CMYK, RVB, interactive pdf, regular pdf, with tons of different other options, the text was still very aliased.
I decided to take it back from scratch, openned a new document with the same size, and copied/pasted element after element from the old one to the new one, exporting as pdf between each copy/paste. The first exports went really well, the render was great… until I pasted a vector element that was applied with a blending mode (overlay).
When I switched it to normal, the pdf export was smooth again. Tried every blending mode, everyone makes the text jaggy. Switch back, it's ok. So I'm 100% sure that this comes from blending modes, as opposed to what I could have read on other forums.
This is a request, please, InDesign team, take care of this problem, this is quite annoying in many cases.
Thank you for your attention!
Twitted here as well : https://twitter.com/grinderlabs/status/448381486627311616To minmize the possibility of rasterizing or outlining text when transparency is flattened, keep the text above any transparent objects. Blending modes, along with most effects, use transparency.
You can also minimize the risk by exporting the PDF with live transparency, which is supported in Acrobat 5 or higher compatibility. -
Questions about PDF exporting with InDe CS5.5
Hey all,
A couple questions about exporting to PDF from the latest version of InDe.
First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Thanks as always.First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Yes, this is abnormally long (and too long), something is wrong. What's the full version of InDesign you are running, as reported by holding down Cmd or Control and selecting About InDesign?
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
Saving is not related. InDesign makes a database snapshot of your document the moment you begin the PDF export, and makes the export relative to that snapshot, regardless of edits you continue to make during the export process, and regardless of saving. Of course saving first is a good idea, for several reasons, not the least of which it sounds like something's fairly seriously wrong with your document or your InDesign installation.
We recommend you trash your preferences and export your document to IDML and see if either of those things changes this 8-minute behavior...err, assuming you're running 7.5.2.318.
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Yeah, I think the primary benefit is if you are likely to work on 2 or more files in parallel, so you can finish A and export A and then switch to B. If you'd like a dialog box to pop up when export is done, check out my exportPop script from this post: ANN: automatic dialog after background export (exportPop.jsx. -
PDF export causes text to be pixelated (continued)
Alright, what is going on with Adobe's accounts?
Apparently Adobe doesn't recognize my username and password for this second account, and when I ask to send a password to my email, I never get the email, so I had to create a third account just to post a thread and update it.
And what the hell is going on with my original thread?
http://forums.adobe.com/thread/988287
I can't find a Reply button anywhere to update my question. I just saw it there a few days ago. What happened to that? I can't find for the life of me another way to update my thread! Why is the thread marked (READ ONLY) when my question hasn't been answered yet?
You people have to be kidding me! This is seriously the most confusing, bewildering process I have ever had to go through just to ask a question and update it.
So that's why I'm creating this new thread. Here is a link to the old one:
http://forums.adobe.com/thread/988287
Anyways!
Here is the update that I was trying to post for the past week, in that thread, but couldn't:
UPDATE:
I still have not received an answer to my question:
How do I export a vector drawing with text in Photoshop to a PDF, such that the text isn't pixelated when I view the PDF?Unfortunately I have to use PDF, because I need the file to be infinitely resolved when I zoom in as much as I want (no pixelation).
But then again, why do it in Photoshop in the first place? You are using the most unsuitable tool I can think of to produce guaranteed vector-based output. The standard answer we use in the Illustrator forum a lot is: If it gets rasterized, then there is some appearance that makes the programm think it can only retain the look by converting to pixels. Contrary to what you think, just drawing it out as vectors doesn't guarantee vector output. There is any number of things that could be going on, so unless you tell us more about your setup and what PDF export options you actually use, this is an pretty unproductive discussion, but some of the common caveats are:
- you may not be allowed to embed the fonts
- you may have formatted the text with custom options
- your vector shapes may overlap in a way, that there is no way to calculate holes and self-intersections on paths within the PDF spec
- any number of issues with things involving transparencies and blending modes, including layer styles, partial opacities, adjustment layers
- nesting of layers/ paths in general
Again, without seeing what exactly you are doing, it's impossible to advise, but as a start check those things.
Mylenium -
Bug - PDF export missing brush strokes
Can anyone reproduce this apparent bug in FHMX?
1. Apply a brushstroke to an object.
2. Group with 'Transform As Unit' checked.
3. Duplicate object several times. Scale some of the copies
larger and some
smaller.
4. Export document to PDF.
Open exported PDF in Acrobat, Illustrator or Preview.
Unexpected results:
All of the scaled copies of the object are missing from the
PDF.
Judy Arndt
FHMX 11.0.2, Mac OS 10.4.6Rich Hudgins wrote:
> Confirmed in FH10 - OSX 10.4.x. I tried opening the PDF
back into FH
> just for kicks... very interesting. There are the exact
number of
> originals and dupes directly on top of the original.
i.e. I made an
> original and two smaller and two larger dupes, offset
from the original.
> In the FH opened PDF there were 5 exact copies of the
original item
> directly on top of each other. There were also 5
nostroke-nofill copies
> of the original shape without the brush stroke.
Wow! Yes! Same here.
Any transforms done to an object after being grouped with
'Transform As
Unit', are being ignored by the PDF Export.
This series of steps will produce the same problem described
by Makate.
1. Apply a brushstroke to an object.
2. Duplicate object and move it to another location on page.
3. Group the duplicate object with 'Transform As Unit' (TAU)
checked. Then
scale it larger.
4. Export document to PDF.
Unexpected results:
The duplicate object will be the same size as the original
object.
This will happen not only with brush strokes but with
ordinary strokes. PDF
Export is missing all transformations made after TAU is
applied. If I
remember correctly, TAU, which has been in FH since very
early versions, is
a kind of Postscript envelope. My theory is that because FH
doesn't have a
Postscript interpreter, it's missing the Postsript
transformations.
This limitation in PDF Export is very unfortunate because the
default
preference setting in a new FH installation is "Groups
transform as unit by
default". It is the logical way to preserve the appearance of
artwork with
strokes, brush strokes and vector effects. New users could
not possibly know
that this is one of the many limitations of PDF export. It's
not listed in
the technote, but it may be the reason for 'missing objects'.
http://www.adobe.com/go/tn_13496
Using Acrobat Pro/Distiller is the only safe way to generate
PDF files from
FreeHand.
Judy Arndt -
PDF export from ID6 creates disproportionately large PDF files
When I create a PDF export from ID6 the resulting file is always disproportionately large, even though the documents contain no images, are mostly text, all graphics are vector graphics and the document is one colour. Then, after trying lots of different settings, including the lowest possible, I cannot keep the file size reasonable.
I have also tried reducing the file size from within Acrobat 9, but this doesn't have any effect.
The only thing that works is exporting the same document as an EPS, importing the EPS into Illustrator, and then saving that EPS as a PDF from illustrator. This creates a document which has, I think, the correct file size in proportion with its content.
eg., 2 page ID6 doc to PDF = 12.8mb. Then the same 2 page doc saved as 2 separate EPSs, converted to PDFs and then combined as 1 document = 708kb!
This seems to be the only way of reducing the size of the PDF, but as you might expect, creates a huge bottleneck in my workflow.
Can anyone help?You could try adjusting the transparency settings or the image settings.
Be certain you know what you're adjusting before you attempt this, though.
I've had some luck with just going to: Document > Reduce File Size...
I'll let some of the "real" experts chime in on this because I really don't
want to lead you down the wrong path here.
Thanks!
Theresa -
Terrible Graphic Quality with PDF Export from FM9
I'm using FM9 unpatched on Windows XP Pro.
I cannot get the PDF export to work properly with graphics. Everything else looks great in general, but the graphics lose quality, both upon import into FM and even more so upon PDF export.
I have tried every option for importing, both working with native files (ex. .ai) and with JPEG or other format exports, as well as importing the files themselves directly and importing by reference.
I have also tried tweaking the PDF "Image" settings, removing any and all compression to see if it would help, which it did not.
In the end, the best results actually come from imported JPEG files, which are a bit blurry, but (relatively) usable, considering the alternatives. The Illustrator files I want to use are just awful, they are completely bitmapped upon export to PDF.
It is also worth noting that I do not encounter this problem when using the FM drawing tools. The output of those graphic files on printer and in PDF is excellent, vector-quality art.
I find it unusual that I am having this problem and see no other mention of it in the forums. It is causing serious pain and delays on my project, so if someone has any insight, it would be greatly appreciated.
DouglasFirst and foremost, you mention using FM unpatched, but you don't mention any specific reason you haven't applied the patches, can you elaborate on that? What version are you running, then? The latest version is 9.03 aka p250, as shown in Help > About.
There were several fixes to PDF generation in both the .02 and .03 update, so that would be the #1 recommendation.
Second thing is to tell us
1) how you're creating the PDFs, are you using Save As or are you printing to a print file,
2) what printer do you have set as your default printer (in FM) when you create the PDF
Sheila -
No email to verify my purchase of PDF export
I have not received an email to allow me to start using th ePDF export I purchased more than a week ago. I have checked my junk mail etc but no sign anywhere. Disappointed as payment accepted.
EileenHello David
Thankyou for your response, my apologies but I purchased with another email account which was [email protected] for receipt of Adobe email. I have never received a confirmation email to allow me to access PDF export but I have a receipt for payment.
Looking forward to hearing from you.
Eileen
Date: Tue, 30 Apr 2013 01:07:38 -0700
From: [email protected]
To: [email protected]
Subject: no email to verify my purchase of PDF export
Re: no email to verify my purchase of PDF export
created by David Kastendick in Adobe ExportPDF - View the full discussion
Hi Eileen, I do not show a paid subscription to ExportPDF associated with your @hotmail.co.uk Adobe ID that you used to post this message. If you subscribed to the service with a different Adobe ID, can you let us know if you were able to verify that email address? -David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5278672#5278672
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5278672#5278672
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5278672#5278672. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe ExportPDF by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
There was a thread a while back titled "PDF Export Crash." Because it was archived, I was unable to post my findings there. This issue recently became front and center for me within the last 24 hours. For those unaware, I am referring to an issue where Pages crashes every single time you try to export to PDF on certain documents (even through the print dialog). Using a different computer only produces the same results!
After some investigation and testing, I was able to discover that the presence of footnotes was directly tied to the problem. Once removed, seamless exporting followed. However, not all footnotes were responsible. I found the third page of my document, when isolated, exported just fine along with its footnote; while the fourth page of my document, when isolated, did not export (crashed). Footnote along are there NOT directly responsible.
Although I am still unable to determine the exact problem, I would like to make these observations available along with another workaround I discovered. It is a little tedious, but absolutely guaranteed to work for someone who is desparate.
1. Copy and paste your entire document into TextEdit.
2. Create a new blank Pages document and past it back in.
3. Manually add your footnote back in one at a time.
4. Make any minor formatting corrections from the transfer.
After using this method to recreate the original document, while visibly symmetrical, the recreation process somehow eliminated the "quirks" that were causing Pages to crash during a PDF export.
If anyone is still having this issue, I'd be interested to hear from you. Especially if you have discovered exactly what causes certain footnotes to disrupt the PDF export process.
iMac G4 Mac OS X (10.4.2)In order to isolate the problem as much as possible, you may want to delete parts of the document, step by step, and see how small it can be and still crash.
If you are lucky, that may tell us exactly what causes the crash.
If you are unlucky, the reason is an exceptional corruption of the document, which happened some time in the past, and which cannot be isolated this way.
Good luck! -
Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close
I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces? -
URGENT! Alive PDF - export PDF file ("my computer" prompt to save the file, not create in browser)
Hi - I'm having issues with my code and I'm not an ActionScript coder by any means. I'm using Flash Builder 4. I've been able to figure out how to export to PNG and to XLS but PDF is really killing me.
Below is my code and it's not causing errors when I do the release build but the my button doesn't work to export to PDF. I'm trying to create a PNG using the PNGEncoder and then push that out to PDF (when the PDF button is selected). I used some sample code and I've commented out parts that I didn't want to use or didn't seem to apply to my application. Unfortunately, I have a deadline of May 3rd on this and there is no one else in the office here to help me... hope someone out there can.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" height="650" width="850">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import flash.events.Event;
import mx.events.DropdownEvent;
import mx.events.*;
import mx.graphics.codec.PNGEncoder;
import org.alivepdf.display.*;
import org.alivepdf.images.ColorSpace;
import org.alivepdf.fonts.*;
import org.alivepdf.layout.*;
import org.alivepdf.pdf.*;
import org.alivepdf.saving.*;
import mx.controls.Alert;
//PDF Export information
protected var pdf:PDF;
protected function savePDF(event:MouseEvent): void {
pdf = new PDF(Orientation.LANDSCAPE, Unit.MM, Size.LETTER);
pdf.setDisplayMode(Display.FULL_WIDTH);
pdf.addPage();
var bd:BitmapData = new BitmapData(cChart.width,cChart.height);
bd.draw(cChart);
var png:PNGEncoder = new PNGEncoder();
var ba:ByteArray = png.encode(bd);
//try {
pdf.addImageStream(ba, ColorSpace.DEVICE_RGB, new Resize ( Mode.FIT_TO_PAGE, Position.CENTERED ), 10, 10, 800, 800, 0, 1, "Normal", null);
//} catch (e:Error) {
// trace("Error occurred!");
// Alert.show(e,"");
//myPDF.addImageStream(new jpgBytes() as ByteArray, ColorSpace.DEVICE_RGB, null, 0, 0, 500, 500, 0, 1, "Normal", null);
//imageBytes:ByteArray, colorSpace:String, resizeMode:Resize=null, x:Number=0, y:Number=0, width:Number=0, height:Number=0, rotation:Number=0, alpha:Number=1, blendMode:String="Normal", link:ILink=null):
//pdf.setFont(FontFamily.ARIAL, Style.NORMAL, 12);
//pdf.addText("Grafico de Rata de Fallas", 100, 40); // title
//pdf.addImage(imprimirRata, 50, 50, 200, 150); // captured canvas with charts
// pdf.addImage(leyendaImprimir, 50, 120, 20,20); // captured leyend of charts
//pdf.addText("RTP Software. Modulo de Score Card.", 10, 200); // header of the document
//pdf.addText("Creado: " + new Date(), 180, 200); // Add the created date as a leyend or footer on document
var fr:FileReference = new FileReference();
fr.save(pdf.save(Method.LOCAL), "nep_piefy11.pdf");
/*var fs:FileStream = new FileStream();
var file: File = File.desktopDirectory.resolvePath("nep_piefy11.pdf"); // Name of the file
fs.open(file, FileMode.WRITE);
fs.writeBytes(pdf.save(Method.LOCAL));
fs.close();*/
//Alert.show("El reporte ha sido generado", "Informacion"); // Confirmation message as a pop-up
//Pie Chart Creation information
[Bindable]
public var ds:ArrayCollection = sel;
private function changeEvt(event:Event):void {
if(filterCombo.selectedItem == 'Select NEP') {ds = sel;}
if(filterCombo.selectedItem == 'Albemarle-Pamlico Estuary Program') {ds = nep1;}
if(filterCombo.selectedItem == 'Barataria-Terrebonne Estuary Program') {ds = nep2;}
if(filterCombo.selectedItem == 'Barnegat Bay Estuary Program') {ds = nep3;}
if(filterCombo.selectedItem == 'Buzzards Bay National Estuary Program') {ds = nep4;}
if(filterCombo.selectedItem == 'Casco Bay Estuary Partnership') {ds = nep5;}
if(filterCombo.selectedItem == 'Charlotte Harbor Estuary Program') {ds = nep6;}
if(filterCombo.selectedItem == 'Coastal Bend Bays and Estuaries Program') {ds = nep7;}
if(filterCombo.selectedItem == 'Delaware Estuary Program') {ds = nep8;}
if(filterCombo.selectedItem == 'Delaware Inland Bays Estuary Program') {ds = nep9;}
if(filterCombo.selectedItem == 'Galveston Bay Estuary Program') {ds = nep10;}
if(filterCombo.selectedItem == 'Indian River Lagoon NEP') {ds = nep11;}
if(filterCombo.selectedItem == 'Long Island Sound Study') {ds = nep12;}
if(filterCombo.selectedItem == 'Lower Columbia River Estuary') {ds = nep13;}
if(filterCombo.selectedItem == 'Maryland Coastal Bays Program') {ds = nep14;}
if(filterCombo.selectedItem == 'Massachusetts Bays NEP') {ds = nep15;}
if(filterCombo.selectedItem == 'Mobile Bay Estuary Program') {ds = nep16;}
if(filterCombo.selectedItem == 'Morro Bay Estuary Program') {ds = nep17;}
if(filterCombo.selectedItem == 'Narragansett Bay Estuary Program') {ds = nep18;}
if(filterCombo.selectedItem == 'New York-New Jersey Harbor Estuary Program') {ds = nep19;}
if(filterCombo.selectedItem == 'Peconic Estuary Program') {ds = nep20;}
if(filterCombo.selectedItem == 'Piscataqua Region Estuaries Partnership') {ds = nep21;}
if(filterCombo.selectedItem == 'Puget Sound Partnership') {ds = nep22;}
if(filterCombo.selectedItem == 'San Francisco Estuary Project') {ds = nep23;}
if(filterCombo.selectedItem == 'San Juan Bay NEP') {ds = nep24;}
if(filterCombo.selectedItem == 'Santa Monica Bay Restoration Project') {ds = nep25;}
if(filterCombo.selectedItem == 'Sarasota Bay Estuary Program') {ds = nep26;}
if(filterCombo.selectedItem == 'Tampa Bay Estuary Program') {ds = nep27;}
if(filterCombo.selectedItem == 'Tillamook Estuaries Partnership') {ds = nep28;}
[Bindable]
private var sel:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0.5},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep1:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 778.44},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0.45},
{ habtype: "Estuarine Shoreline", Acres: 1276.30},
{ habtype: "Instream", Acres: 1.0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0.75},
{ habtype: "Upland", Acres: 779.74},
{ habtype: "Wetland", Acres: 3268.31} ]);
[Bindable]
private var nep2:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 7.25},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 1185} ]);
[Bindable]
private var nep3:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 35.21},
{ habtype: "Upland", Acres: 852.57},
{ habtype: "Wetland", Acres: 197.82} ]);
[Bindable]
private var nep4:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 751.82},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 321.82},
{ habtype: "Wetland", Acres: 157.35} ]);
[Bindable]
private var nep5:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 217},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 324.5},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep6:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 1268},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 50},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 61},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 809},
{ habtype: "Wetland", Acres: 1690} ]);
[Bindable]
private var nep7:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 726} ]);
[Bindable]
private var nep8:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0.28},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 82},
{ habtype: "Estuarine Shoreline", Acres: 0.14},
{ habtype: "Instream", Acres: 2.3},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 643},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 501.9},
{ habtype: "Upland", Acres: 148.71},
{ habtype: "Wetland", Acres: 2586.02} ]);
[Bindable]
private var nep9:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 26.21},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 37},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 27},
{ habtype: "Wetland", Acres: 646} ]);
[Bindable]
private var nep10:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 2868},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 407.06} ]);
[Bindable]
private var nep11:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 5},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 3},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 43},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 12910.5},
{ habtype: "Wetland", Acres: 5026} ]);
[Bindable]
private var nep12:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 67},
{ habtype: "Beach/Dune", Acres: 21.95},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 120.72},
{ habtype: "Wetland", Acres: 151.08} ]);
[Bindable]
private var nep13:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 12},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 194},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 200} ]);
[Bindable]
private var nep14:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 58},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 153},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 494.3},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep15:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 1313},
{ habtype: "Estuarine Shoreline", Acres: 8},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 543.8} ]);
[Bindable]
private var nep16:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 40},
{ habtype: "Estuarine Shoreline", Acres: 6.5},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 195},
{ habtype: "Wetland", Acres: 85} ]);
[Bindable]
private var nep17:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 1109.9},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 1.14},
{ habtype: "Estuarine Shoreline", Acres: 0.28},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0.71},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep18:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 1099},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep19:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 101.3} ]);
[Bindable]
private var nep20:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 98.72},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 17.99},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 106.13},
{ habtype: "Wetland", Acres: 12.97} ]);
[Bindable]
private var nep21:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 9},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 3},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 2},
{ habtype: "Upland", Acres: 1451},
{ habtype: "Wetland", Acres: 27} ]);
[Bindable]
private var nep22:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 26},
{ habtype: "Beach/Dune", Acres: 1.65},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 240.39},
{ habtype: "Estuarine Shoreline", Acres: 314.97},
{ habtype: "Instream", Acres: 505.87},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 1450.47},
{ habtype: "Upland", Acres: 1176.7},
{ habtype: "Wetland", Acres: 850.58} ]);
[Bindable]
private var nep23:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 43.05},
{ habtype: "Upland", Acres: 4519},
{ habtype: "Wetland", Acres: 3271} ]);
[Bindable]
private var nep24:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 1},
{ habtype: "Coral Reef", Acres: 0.13},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 1},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 10} ]);
[Bindable]
private var nep25:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 1.6},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 7},
{ habtype: "Riparian", Acres: 100},
{ habtype: "Upland", Acres: 6.2},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep26:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 5.5},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 4.5},
{ habtype: "Estuarine Shoreline", Acres: 15},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 82},
{ habtype: "Wetland", Acres: 40} ]);
[Bindable]
private var nep27:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 5.1},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 23},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 4.8},
{ habtype: "Mangrove", Acres: 3.5},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 1221},
{ habtype: "Wetland", Acres: 17.4}]);
[Bindable]
private var nep28:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 67},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 2},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 31.33},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 74.24}]);
private function displayAcres(data:Object, field:String, index:Number, percentValue:Number):String {
var temp:String= (" " + percentValue).substr(0,6);
return data.habtype + ": " + '\n ' + data.Acres + " Acres" + '\n ' + temp + "%";
//Export to PNG information
private function saveImageAs(event:MouseEvent):void
var bd:BitmapData = new BitmapData(cChart.width,cChart.height);
bd.draw(cChart);
var png:PNGEncoder = new PNGEncoder();
var ba:ByteArray = png.encode(bd);
var fr:FileReference = new FileReference();
fr.save(ba, "nepfy11-piechart.png");
]]>
</mx:Script>
<!--mx:SeriesInterpolate id="chartChange" duration="2000" /-->
<mx:Panel id="cChart" title="2011 Habitat Efforts" width="825" height="600" chromeColor="#527EAC" layout="vertical" color="#FFFFFF" verticalGap="10" x="15" y="15">
<mx:HBox width="400" height="20">
<mx:ComboBox id="filterCombo" x="140" y="140" change="changeEvt(event)" color="#000000" >
<mx:String>Select NEP</mx:String>
<mx:String>Albemarle-Pamlico Estuary Program</mx:String>
<mx:String>Barataria-Terrebonne Estuary Program</mx:String>
<mx:String>Barnegat Bay Estuary Program</mx:String>
<mx:String>Buzzards Bay National Estuary Program</mx:String>
<mx:String>Casco Bay Estuary Partnership</mx:String>
<mx:String>Charlotte Harbor Estuary Program</mx:String>
<mx:String>Coastal Bend Bays and Estuaries Program</mx:String>
<mx:String>Delaware Estuary Program</mx:String>
<mx:String>Delaware Inland Bays Estuary Program</mx:String>
<mx:String>Galveston Bay Estuary Program</mx:String>
<mx:String>Indian River Lagoon NEP</mx:String>
<mx:String>Long Island Sound Study</mx:String>
<mx:String>Lower Columbia River Estuary</mx:String>
<mx:String>Maryland Coastal Bays Program</mx:String>
<mx:String>Massachusetts Bays NEP</mx:String>
<mx:String>Mobile Bay Estuary Program</mx:String>
<mx:String>Morro Bay Estuary Program</mx:String>
<mx:String>Narragansett Bay Estuary Program</mx:String>
<mx:String>New York-New Jersey Harbor Estuary Program</mx:String>
<mx:String>Peconic Estuary Program</mx:String>
<mx:String>Piscataqua Region Estuaries Partnership</mx:String>
<mx:String>Puget Sound Partnership</mx:String>
<mx:String>San Francisco Estuary Project</mx:String>
<mx:String>San Juan Bay NEP</mx:String>
<mx:String>Santa Monica Bay Restoration Project</mx:String>
<mx:String>Sarasota Bay Estuary Program</mx:String>
<mx:String>Tampa Bay Estuary Program</mx:String>
<mx:String>Tillamook Estuaries Partnership</mx:String>
</mx:ComboBox>
</mx:HBox>
<mx:HBox horizontalGap="20" width="822" height="535">
<mx:PieChart id="chart" showDataTips="true" dataProvider="{ds}" width="634" height="534" paddingTop="10" fontSize="9" fontFamily="Arial" color="#000000" textAlign="left">
<mx:series>
<mx:PieSeries id="seriesId" explodeRadius="0.06" nameField="habtype" labelPosition="callout" color="#000000" insideLabelSizeLimit="8" field="Acres" labelFunction="displayAcres">
</mx:PieSeries>
</mx:series>
</mx:PieChart>
<mx:Legend dataProvider="{chart}" dropShadowVisible="true" width="150" color="#000000" height="350" chromeColor="#527EAC" borderColor="#527EAC" direction="vertical"/>
</mx:HBox>
</mx:Panel>
<mx:Button x="734" y="623" label="Export Pie Chart" id="btnSnap" click="saveImageAs(event)"/>
<mx:Button x="444" y="623" label="PDF" click="savePDF(event)" />
</mx:Application>
Thank you in advance,
AlisonI figured it out!!!!! In case anyone else needs to know - here is the working code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" height="650" width="850">
<mx:Script>
<![CDATA[
import flash.events.Event;
import mx.collections.ArrayCollection;
import mx.controls.Alert;
import mx.events.*;
import mx.events.DropdownEvent;
import mx.graphics.codec.PNGEncoder;
import org.alivepdf.display.*;
import org.alivepdf.fonts.*;
import org.alivepdf.images.ColorSpace;
import org.alivepdf.images.PDFImage;
import org.alivepdf.layout.*;
import org.alivepdf.pdf.*;
import org.alivepdf.saving.*;
//PDF Export information
private var pdf:PDF;
private function savePDF(event:MouseEvent): void {
pdf = new PDF(Orientation.LANDSCAPE, Unit.MM, Size.LETTER);
pdf.setDisplayMode(Display.FULL_WIDTH);
pdf.addPage();
var bd:BitmapData = new BitmapData(cChart.width,cChart.height);
bd.draw(cChart);
var bm:Bitmap=new Bitmap(bd);
//bm.x=825;
//bm.y=600;
//bm.width=825;
pdf.setMargins(0, 2, 0, 0);
pdf.addImage(bm, new Resize (Mode.RESIZE_PAGE, Position.CENTERED));
//pdf.setXY(10,95);
var bytes:ByteArray=pdf.save(Method.LOCAL);
var fr:FileReference=new FileReference();
fr.save(bytes,"nep_piefy11.pdf");
//Pie Chart Creation information
[Bindable]
public var ds:ArrayCollection = sel;
private function changeEvt(event:Event):void {
if(filterCombo.selectedItem == 'Select NEP') {ds = sel;}
if(filterCombo.selectedItem == 'Albemarle-Pamlico Estuary Program') {ds = nep1;}
if(filterCombo.selectedItem == 'Barataria-Terrebonne Estuary Program') {ds = nep2;}
if(filterCombo.selectedItem == 'Barnegat Bay Estuary Program') {ds = nep3;}
if(filterCombo.selectedItem == 'Buzzards Bay National Estuary Program') {ds = nep4;}
if(filterCombo.selectedItem == 'Casco Bay Estuary Partnership') {ds = nep5;}
if(filterCombo.selectedItem == 'Charlotte Harbor Estuary Program') {ds = nep6;}
if(filterCombo.selectedItem == 'Coastal Bend Bays and Estuaries Program') {ds = nep7;}
if(filterCombo.selectedItem == 'Delaware Estuary Program') {ds = nep8;}
if(filterCombo.selectedItem == 'Delaware Inland Bays Estuary Program') {ds = nep9;}
if(filterCombo.selectedItem == 'Galveston Bay Estuary Program') {ds = nep10;}
if(filterCombo.selectedItem == 'Indian River Lagoon NEP') {ds = nep11;}
if(filterCombo.selectedItem == 'Long Island Sound Study') {ds = nep12;}
if(filterCombo.selectedItem == 'Lower Columbia River Estuary') {ds = nep13;}
if(filterCombo.selectedItem == 'Maryland Coastal Bays Program') {ds = nep14;}
if(filterCombo.selectedItem == 'Massachusetts Bays NEP') {ds = nep15;}
if(filterCombo.selectedItem == 'Mobile Bay Estuary Program') {ds = nep16;}
if(filterCombo.selectedItem == 'Morro Bay Estuary Program') {ds = nep17;}
if(filterCombo.selectedItem == 'Narragansett Bay Estuary Program') {ds = nep18;}
if(filterCombo.selectedItem == 'New York-New Jersey Harbor Estuary Program') {ds = nep19;}
if(filterCombo.selectedItem == 'Peconic Estuary Program') {ds = nep20;}
if(filterCombo.selectedItem == 'Piscataqua Region Estuaries Partnership') {ds = nep21;}
if(filterCombo.selectedItem == 'Puget Sound Partnership') {ds = nep22;}
if(filterCombo.selectedItem == 'San Francisco Estuary Project') {ds = nep23;}
if(filterCombo.selectedItem == 'San Juan Bay NEP') {ds = nep24;}
if(filterCombo.selectedItem == 'Santa Monica Bay Restoration Project') {ds = nep25;}
if(filterCombo.selectedItem == 'Sarasota Bay Estuary Program') {ds = nep26;}
if(filterCombo.selectedItem == 'Tampa Bay Estuary Program') {ds = nep27;}
if(filterCombo.selectedItem == 'Tillamook Estuaries Partnership') {ds = nep28;}
[Bindable]
private var sel:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0.5},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep1:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 778.44},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0.45},
{ habtype: "Estuarine Shoreline", Acres: 1276.30},
{ habtype: "Instream", Acres: 1.0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0.75},
{ habtype: "Upland", Acres: 779.74},
{ habtype: "Wetland", Acres: 3268.31} ]);
[Bindable]
private var nep2:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 7.25},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 1185} ]);
[Bindable]
private var nep3:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 35.21},
{ habtype: "Upland", Acres: 852.57},
{ habtype: "Wetland", Acres: 197.82} ]);
[Bindable]
private var nep4:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 751.82},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 321.82},
{ habtype: "Wetland", Acres: 157.35} ]);
[Bindable]
private var nep5:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 217},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 324.5},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep6:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 1268},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 50},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 61},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 809},
{ habtype: "Wetland", Acres: 1690} ]);
[Bindable]
private var nep7:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 726} ]);
[Bindable]
private var nep8:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0.28},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 82},
{ habtype: "Estuarine Shoreline", Acres: 0.14},
{ habtype: "Instream", Acres: 2.3},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 643},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 501.9},
{ habtype: "Upland", Acres: 148.71},
{ habtype: "Wetland", Acres: 2586.02} ]);
[Bindable]
private var nep9:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 26.21},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 37},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 27},
{ habtype: "Wetland", Acres: 646} ]);
[Bindable]
private var nep10:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 2868},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 407.06} ]);
[Bindable]
private var nep11:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 5},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 3},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 43},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 12910.5},
{ habtype: "Wetland", Acres: 5026} ]);
[Bindable]
private var nep12:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 67},
{ habtype: "Beach/Dune", Acres: 21.95},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 120.72},
{ habtype: "Wetland", Acres: 151.08} ]);
[Bindable]
private var nep13:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 12},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 194},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 200} ]);
[Bindable]
private var nep14:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 58},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 153},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 494.3},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep15:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 1313},
{ habtype: "Estuarine Shoreline", Acres: 8},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 543.8} ]);
[Bindable]
private var nep16:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 40},
{ habtype: "Estuarine Shoreline", Acres: 6.5},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 195},
{ habtype: "Wetland", Acres: 85} ]);
[Bindable]
private var nep17:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 1109.9},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 1.14},
{ habtype: "Estuarine Shoreline", Acres: 0.28},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0.71},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep18:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 1099},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep19:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 101.3} ]);
[Bindable]
private var nep20:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 98.72},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 17.99},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 106.13},
{ habtype: "Wetland", Acres: 12.97} ]);
[Bindable]
private var nep21:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 9},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 3},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 2},
{ habtype: "Upland", Acres: 1451},
{ habtype: "Wetland", Acres: 27} ]);
[Bindable]
private var nep22:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 26},
{ habtype: "Beach/Dune", Acres: 1.65},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 240.39},
{ habtype: "Estuarine Shoreline", Acres: 314.97},
{ habtype: "Instream", Acres: 505.87},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 1450.47},
{ habtype: "Upland", Acres: 1176.7},
{ habtype: "Wetland", Acres: 850.58} ]);
[Bindable]
private var nep23:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 43.05},
{ habtype: "Upland", Acres: 4519},
{ habtype: "Wetland", Acres: 3271} ]);
[Bindable]
private var nep24:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 1},
{ habtype: "Coral Reef", Acres: 0.13},
{ habtype: "Estuarine", Acres: 0},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 1},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 10} ]);
[Bindable]
private var nep25:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 1.6},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 7},
{ habtype: "Riparian", Acres: 100},
{ habtype: "Upland", Acres: 6.2},
{ habtype: "Wetland", Acres: 0} ]);
[Bindable]
private var nep26:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 5.5},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 4.5},
{ habtype: "Estuarine Shoreline", Acres: 15},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 82},
{ habtype: "Wetland", Acres: 40} ]);
[Bindable]
private var nep27:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 0},
{ habtype: "Beach/Dune", Acres: 5.1},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 23},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 4.8},
{ habtype: "Mangrove", Acres: 3.5},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 0},
{ habtype: "Upland", Acres: 1221},
{ habtype: "Wetland", Acres: 17.4}]);
[Bindable]
private var nep28:ArrayCollection = new ArrayCollection( [
{ habtype: "Agriculture/Ranch Land", Acres: 67},
{ habtype: "Beach/Dune", Acres: 0},
{ habtype: "Coral Reef", Acres: 0},
{ habtype: "Estuarine", Acres: 2},
{ habtype: "Estuarine Shoreline", Acres: 0},
{ habtype: "Instream", Acres: 0},
{ habtype: "Island", Acres: 0},
{ habtype: "Lake/Pond", Acres: 0},
{ habtype: "Mangrove", Acres: 0},
{ habtype: "Other", Acres: 0},
{ habtype: "Riparian", Acres: 31.33},
{ habtype: "Upland", Acres: 0},
{ habtype: "Wetland", Acres: 74.24}]);
private function displayAcres(data:Object, field:String, index:Number, percentValue:Number):String {
var temp:String= (" " + percentValue).substr(0,6);
return data.habtype + ": " + '\n ' + data.Acres + " Acres" + '\n ' + temp + "%";
//Export to PNG information
private function saveImageAs(event:MouseEvent):void
var bd:BitmapData = new BitmapData(cChart.width,cChart.height);
bd.draw(cChart);
var png:PNGEncoder = new PNGEncoder();
var ba:ByteArray = png.encode(bd);
var fr:FileReference = new FileReference();
fr.save(ba, "nepfy11-piechart.png");
]]>
</mx:Script>
<!--mx:SeriesInterpolate id="chartChange" duration="2000" /-->
<mx:Panel id="cChart" title="2011 Habitat Efforts" width="825" height="600" chromeColor="#527EAC" layout="vertical" color="#FFFFFF" verticalGap="10" x="15" y="15">
<mx:HBox width="400" height="20">
<mx:ComboBox id="filterCombo" x="140" y="140" change="changeEvt(event)" color="#000000" >
<mx:String>Select NEP</mx:String>
<mx:String>Albemarle-Pamlico Estuary Program</mx:String>
<mx:String>Barataria-Terrebonne Estuary Program</mx:String>
<mx:String>Barnegat Bay Estuary Program</mx:String>
<mx:String>Buzzards Bay National Estuary Program</mx:String>
<mx:String>Casco Bay Estuary Partnership</mx:String>
<mx:String>Charlotte Harbor Estuary Program</mx:String>
<mx:String>Coastal Bend Bays and Estuaries Program</mx:String>
<mx:String>Delaware Estuary Program</mx:String>
<mx:String>Delaware Inland Bays Estuary Program</mx:String>
<mx:String>Galveston Bay Estuary Program</mx:String>
<mx:String>Indian River Lagoon NEP</mx:String>
<mx:String>Long Island Sound Study</mx:String>
<mx:String>Lower Columbia River Estuary</mx:String>
<mx:String>Maryland Coastal Bays Program</mx:String>
<mx:String>Massachusetts Bays NEP</mx:String>
<mx:String>Mobile Bay Estuary Program</mx:String>
<mx:String>Morro Bay Estuary Program</mx:String>
<mx:String>Narragansett Bay Estuary Program</mx:String>
<mx:String>New York-New Jersey Harbor Estuary Program</mx:String>
<mx:String>Peconic Estuary Program</mx:String>
<mx:String>Piscataqua Region Estuaries Partnership</mx:String>
<mx:String>Puget Sound Partnership</mx:String>
<mx:String>San Francisco Estuary Project</mx:String>
<mx:String>San Juan Bay NEP</mx:String>
<mx:String>Santa Monica Bay Restoration Project</mx:String>
<mx:String>Sarasota Bay Estuary Program</mx:String>
<mx:String>Tampa Bay Estuary Program</mx:String>
<mx:String>Tillamook Estuaries Partnership</mx:String>
</mx:ComboBox>
</mx:HBox>
<mx:HBox horizontalGap="20" width="822" height="535">
<mx:PieChart id="chart" showDataTips="true" dataProvider="{ds}" width="634" height="534" paddingTop="10" fontSize="9" fontFamily="Arial" color="#000000" textAlign="left">
<mx:series>
<mx:PieSeries id="seriesId" explodeRadius="0.06" nameField="habtype" labelPosition="callout" color="#000000" insideLabelSizeLimit="8" field="Acres" labelFunction="displayAcres">
</mx:PieSeries>
</mx:series>
</mx:PieChart>
<mx:Legend dataProvider="{chart}" dropShadowVisible="true" width="150" color="#000000" height="350" chromeColor="#527EAC" borderColor="#527EAC" direction="vertical"/>
</mx:HBox>
</mx:Panel>
<mx:Button x="746" y="623" label="Export to PNG" id="btnSnap" click="saveImageAs(event)"/>
<mx:Button x="651" y="623" label="Export to PDF" click="savePDF(event)" />
</mx:Application>
Thanks, Alison -
Exporting Keynote presentation in PDF via email is a great feature that has been awaited by potential business users.
However, PDF exports from ipad do not seems to be supported by acrobat especially on PCs/windows system. Font conversion seems corrupted and text appears with bullets.
Any hint on how to send keynote presentation converted in pdf properly ?
Many thxI also ran into a bug with PDF export today. The PDF displayed properly on my mac, but when viewed on other laptops (and when uploaded to Scribd), the text was missing. :/
Workaround was to export the keynote file to my mac, then use the desktop keynote app to re-export as PDF. -
Single letters dropping out in PDFs exported from Indesign CS
We are having font issues in some of our magazine's advertisements which proved very costly last month. First let me describe the work flow.
We designed an ad in Indesign CS then exported it using the press setting in Indesign's PDF export option. Here the ad looked and printed fine. The ad was then placed in another Indesign file which was for the layout of one of our magazines. Here the ad still looked fine on screen and when printed out from Indesign. This next step is where the font issue occurs.
When we export the the final magazine's press ready Indesign file, through the PDF press setting in Indesign again, single letters in these problem ads drop out. For example all of the Ds' in the entire ad will be missing. So a sentence in the ad that read "Dirt is Dark" will read " irt is ark."
I am wondering if anyone else has had this problem occur and if they have a solution. The only thing I can think of is in the compression settings there is an option to compress text and line art. We are going to try to uncheck that box to see if it fixes the problem.
Thank you for you help,
Javin.I realized, of course, that it does make a difference. If you don't have the fonts on your system, a frequent issue with incoming ads, you couldn't embed the full font at all. You need to be sure that ads generated in CS have fully embedded fonts, not subsets, or risk dropouts. It will only happen when more than one ad uses the same font, but different glyphs.
Maybe you are looking for
-
How do I verify my Apple ID account?
Please help , getting very frustrated now. ive set up my new Apple ID and verified it on my email address on "gmail" I went to buy an app and it's coming up that I haven't verified my account ? So I clicked "resend verification" but then I get no em
-
I want to access two i cloud accounts on one outlook 2013 profile
Hi, I am using Outlook 2013 and Windows 8 and I and my husband have each one icloud account for emails calendars etc. though we both only use one outlook 2013 profile on our PC for all emails. I have set up my icloud mail and it works fine. I do not
-
Where else can i download the maps?
i have down loaded the east coast aust maps but there is heaps missing. i read somewhere once but cant remember where that you can get maps from another site. does anyone know where else i can get them from and still function in my n95 properly.
-
I want to remove flash player settings manager from my Windows Laptop, How is it done?
I want to completely remove Flash player, plug-in and settings manger. I can uninstall player & plug-in, but settings manager remains. I want it gone. How would I go about this?
-
Crystal Integrator add on version 1_10 Hardware Error on Citrix Server
Hi All, I have encountered an error when I tried to access crystal reports in SBO 2005A version using a Citrix Server. I have installed crystal integrator add on version 1_10 and when I opened crystal reports inside SAP in the main server, I have not