Pdf Failed to open error...
I've been using CS5 for a few months on our new iMac with very few problems...until this week. Seems like more than half the pdfs I try to place in InDesign will not place. I have tried the Holding Shift key and the Show Options is checked, but I am still getting the error on too many pdfs. I've been having to throw the pdf into PS and save as a tiff to get them to place in InDesign. Anyone know of anything else I can try?
Thanks to all.
I heard my name used in vain? (Actually, I'm in Ghent, Belgium right now for the quarterly Ghent PDF Workgroup meeting!)
Yes, I certainly do have strong words against the practice of refrying of PDF files via distillation of PostScript output by Acrobat!
Rather than using the refrying hack that effectively kills live transparency, color management, etc., I would suggest using the preflight capabilities in Acrobat 9 Pro to find out and fix the actual problem as opposed to simply masking it via refrying it.
If the OP has a sample of such a PDF file that refuses to place in InDesign that they can share, on behalf of Adobe, I'd be glad to investigate what's actually going on.
- Dov
Similar Messages
-
Email PDF attachment not opening error
Hi All,
I am sending the PDF attachment through email when i get the mail and opening the attachment the PDF says "A drawing error occurred'. Can any one tell me how to solve this problem.
i am doing otf to pdf conversion and the populate all the field related to the email.
Is there any specific solution for this error.
Regards,
LakshmikanthHi All,
I am sending the PDF attachment through email when i get the mail and opening the attachment the PDF says "A drawing error occurred'. Can any one tell me how to solve this problem.
i am doing otf to pdf conversion and the populate all the field related to the email.
Is there any specific solution for this error.
Regards,
Lakshmikanth -
Some pdf files wont open error "this file is damaged and could not be repaired"
just recently this error has occured on a number of email pdf attachments
"there was an error oping this document. the file is damaged and could not be reapiared"
I am using Mozilla thunderbird and adobe reader 10.1.2.
I have forwarded the attachments to other edress's and get the same error
whn i download the attachment to my pc and check the properties
the general tab gives the file size etc but the PDF tab is empty except for
Fast Web View NO and Pdf version 0.0
i am running winxp professionalWhat can you see when you open the file with a text editor?
-
ITunes failing to open - error message reads "New iTunes Library"
My computer turned itself off last night after overheating.. this has happened before. I went to turn it on this morning and it went through a start up process to ensure now problems occurred. It is now back up and running yet my iTunes will not open and it comes up with an Error message and a Red Cross to say "new iTunes library" when I haven't done anything. I can't open my music or even sync my phone! I have an Acer 5733 laptop and its running in windows 7. it's only a year old... help!!!
are you running any anti virus software on your machine ?
-
Microsoft outlook webapp fails to open error X-OWA-Error
A number of my users are getting the following error when trying to use the latest Office365 update
X-OWA-Error: ClientError;exMsg=Script error.;file=https://r4.res.outlook.com/owa/15.0.745.25/owa2/scripts/boot.1.mouse.js:0
X-OWA-Version: 15.0.745.25
X-FEServer: AMXPR04CA002
X-BEServer: null
Date: 02/01/1601 14:16:51
Native client tools seem to be okay, just 3rd party browsers (we have the same issue with Safari and Chrome). I am assuming that Microsoft have introduced some function with their update last Tuesday/Weds evening.
Nothing on the microsoft site, any help greatly appreciated.I'm Using Microsoft Outlook web app, I'm not facing any issues.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Fireworks CS4 fails to open - Error c06d007e
When I try to open FW CS4 it progresses to 'Initializing
Textures' then stops and memory use goes way up (1,500,000K +) then
it eventually throws up the error message 'Unexpected Exception
c06d007e.
I have tried uninstalling about 75% of my fonts as per a
similar post. Not sure if this problem may be related to my new
video card, an nVidia GeForce 9800GT. I had to roll back the
drivers to an older version because the newest one was causing the
pc to unexpectedly freeze and need rebooting.
System: Vista 32-bit Ultimate
System Memory: 2048 MB (DDR2-533 DDR2 SDRAM)
CPU Type:Intel Pentium 4 640, 3200 MHz (16 x 200)
Motherboard Name: Gigabyte GA-8I955X Pro (3 PCI, 2 PCI-E x1,
1 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN, IEEE-1394)
Video Adapter: NVIDIA GeForce 9800 GT (512 MB)
DirectX: DirectX 10.0Ozmart44 wrote:
> System: Vista 32-bit Ultimate
> System Memory: 2048 MB (DDR2-533 DDR2 SDRAM)
> CPU Type:Intel Pentium 4 640, 3200 MHz (16 x 200)
> Motherboard Name: Gigabyte GA-8I955X Pro (3 PCI, 2 PCI-E
x1, 1 PCI-E x16, 4
> DDR2 DIMM, Audio, Gigabit LAN, IEEE-1394)
> Video Adapter: NVIDIA GeForce 9800 GT (512 MB)
> DirectX: DirectX 10.0
>
I had a similar problem for a while and found that
downloading and
installing the latest drivers for my NVIDIA graphics card
solved it.
It's worth a try, Ozmart.
Linda Rathgeber - Adobe Community Expert
http://www.adobe.com/communities/experts/members/8.html -
Selected file failed to open as a PDF error .. on ARES 7.0
I am trying to enable some reader features using Adobe LiveCycle Reader Ex 7.0 but when I upload the pdf file i got this message
"Error 442: Selected file failed to open as a PDF 'com.adobe.document.pdf.PDFOperationFailure: IDL:com/adobe/document/pdf/PDFOperationFailure:1.0'."
when I open this fiel by Adobe Reader 8.0 I got this message
"This document contained certain rights to enable some features in Adobe Reader. This document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
is there any right should be assigned during the creation of PDF to avoid this error? i am using these products
Adobe LiveCycle Reader Ex 7.0
Adobe Acrobat 7.0
Adobe Reader 8.0
thank u;I am trying to enable some reader features using Adobe LiveCycle Reader Ex 7.0 but when I upload the pdf file i got this message
"Error 442: Selected file failed to open as a PDF 'com.adobe.document.pdf.PDFOperationFailure: IDL:com/adobe/document/pdf/PDFOperationFailure:1.0'."
when I open this fiel by Adobe Reader 8.0 I got this message
"This document contained certain rights to enable some features in Adobe Reader. This document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
is there any right should be assigned during the creation of PDF to avoid this error? i am using these products
Adobe LiveCycle Reader Ex 7.0
Adobe Acrobat 7.0
Adobe Reader 8.0
thank u; -
'failed to open the PDF file' error - Indesign CS3 on Mac
Hi,
Whenever I place PDFs that were created by any other app besides indesign or Illustrator I get a 'failed to open the PDF file' error, previously these PDFs were fine to place but all of a sudden they're not... Help?
I'm not too keen on opening in Illustrator and resaving for the rest of the foreseeable future either...
JaredThanks for the reminder, Scott.
http://indesignsecrets.com/failed-to-open-pdf-error-show-options-to-fix-it.php
Bob -
Failed to open pdf error on every document
Today I came and started placing pdf documents in Indesign CS3 like I always do, and suddenly I start getting "failed to open pdf" errors on every pdf file I try and place. I have tried all the suggested tactics of selecting show import options, changing the crop to bounding box, etc. Nothing working.
I also tried to open the pdf in acrobat and export into a different format or optimize it using the pdf optimizer, but when I do that I get gobbly **** text on the pdf. See screenshots
The only workaround that works is to save as a raster image. But this is incredibly time consuming. I also tried importing these same files into Indesign cs 4 and I get the same errors. I am wondering if this is a system wide issue. Any ideas or suggestions?
I noticed all these pdf were created using cs4 and above. Not sure if this helps.Hold the Shift key as you click Place or turn on Show Import Options in the Place dialogue.
I get this from time to time. Here’s what I think happens: You placed a PDF with Import Options showing so you could select a different crop method, like bleed. This becomes the new default import option for PDF files. But if you import a file with no bleed data InDesign gives an error message instead of either jumping to import options or telling you the default crop options are unavailable for this file. I would call it a bug. I have encountered it from at least version 4 (aka CS2). -
Fail to open PDF file. Error for trying to paste in object.
So occasionaly, i will paste in a PDF into my InDesign document and this error will pop up, Fail to open PDF file. It's not like im opening
the file im just trying to paste it in. I try other pdf files and the same error comes up. Usually this error does not happen when i am pasting in
PDF's into my document but when one error comes up, no PDF's will work. I have to resave my file into another format and then it will work.
What is up with these errors that happen sometimes?
CS5 ID 7.0.3
P.C.Try it again...this time click the show options check box in the place dialog.
Bob -
My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?
Okay. I will try this again. I did remove and reinstall earlier, but will
do it now.
regards, Mike
On Wed, Oct 15, 2014 at 12:55 PM, Sabian Zildjian <[email protected]> -
Downloaded the update for Adobe Reader Xl from 10. Now the Reader will not open a PDF, if says " Fatal error - Failed to connet to DDE Serer. Can anyone provide a solution.
I cannot find a DDE file on my windows 7 computer.Uninstall Reader. Use Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs to remove all traces of Reader. Download a new copy from http://get.adobe.com/reader/enterprise
Install. -
PDF Printer and Acrobat fail to open or run or anything else.
Hi
Adobe Acrobat Standard 9 has been installed on this TS2008 (VM) server for over a year without problem until recently.
To start, the Adobe PDF printer stopped creating PDFs. When it worked a user would print and the PDF (creation) progress bar dialog box would open and the Adobe Distiller icon would appear in the taskbar (swirling) and a PDF would be created. Now we get the progress bar but no Distiller icon and no PDF is created.
Then Adobe Acrobat Standard (editor) failed to open any PDFs. We installed Adobe Acrobat 9 reader which opened PDFs for a while and now that has stopped working.
After many uninstalls, reinstalls, reg cleans we decided to open a case with Adobe who told us that Acrobat 9 is not supported on Server2008. The customer purchased Adobe Acrobat X.
We installed Acrobat X (in terminal server mode) and all was well for around 24hrs and then it all stopped working again.
I have since uninstalled reinstalled again. I created 1 PDF and after that the progress bar just hangs. We performed a controlled user logon to the server and all was going well until one user logged in and he isnt able to open Acrobat to read or edit PDFs.
There are no events logs which appear to directly relate to this. We were concerned about a HpBIDI driver which no longer errors but we do have a large amount of EventID 7036, ServerControl Manager Eventlog provider and EventID 4 SpoolerWin32SPL.
We have since been back to Adobe Support who advised us to unplug the network cable which we cannot do as its a hosted VM (with no access to the the VM console). He then asked us to remove the server from the Domain which we can't do as this is a single live server. They intend to come back to me!
We are really at a loss here for idea's, can anyone please provide some clues?
ThanksHi billu54860732,
Try running the Repair command from under the Help menu to see if it corrects the problem.
The probable cause of the error is, multiple processes of Acrobat/Reader running in the background.
If 'Repair' doesn't resolve the issue kindly follow the steps mentioned below and check, if it helps.
1) Press CTRL+ALT+DEL together
2) Go to the Task Manager
3) Go to Processes in the Task Manager and kill al the processes related to Acrobat/Reader.
4) Launch Reader/Acrobat (It should launch without an error).
To further isolate the issue you might want to run Acrobat/Reader in an environment where no other services are running.
This can be achieved via "MSCONFIG"
1) Click on start type run
2) Type MSCONFIG in the run prompt
3) Go to services and click on hide all Microsoft services
4) Click disable all
5) Go to the startup in configuration window and disable all startup items
6) Restart your system
7) Launch Acrobat/Reader
If, it is launched without an error, a service on your system is conflicting with Acrobat/Reader.
Let me know if issue persist.
Regards,
Aadesh -
STO mail : pdf attachment has an error 'file damage' when try to open it
Dear expert,
I need to send an e-mail to the vendor with the sto list as attachment at the email.
I managed to send email to external addresee and made the pdf attachment, BUT somehow when I open the attachment it has an error says "Adobe Reader could not open xx.pdf because it is either not a supported file type or because the file has been damaged(for axample, it was sent as an email attachment and wasn't corectly decoded)."
Really need your experties to help me. Here is my abap coding to send email and do the pdf attachment at the new ouptput type to send email.
TYPES: BEGIN OF lty_drad,
doknr TYPE drad-doknr,
END OF lty_drad,
BEGIN OF lty_recpt,
smtp_addr TYPE ad_smtpadr,
END OF lty_recpt.
DATA: lt_doc TYPE STANDARD TABLE OF docs,
lt_recpt TYPE STANDARD TABLE OF lty_recpt,
lt_tline LIKE tline OCCURS 0 WITH HEADER LINE,
lt_data TYPE solix_tab,
lt_docu TYPE STANDARD TABLE OF lty_drad,
lt_docfiles TYPE STANDARD TABLE OF bapi_doc_files2,
lw_tline LIKE LINE OF lt_tline,
lw_docu LIKE LINE OF lt_docu,
lw_docfiles LIKE LINE OF lt_docfiles,
lw_objdes TYPE tnati-objdes,
lt_text TYPE bcsy_text,
lw_recpt TYPE adr6-smtp_addr,
lw_adrnr TYPE lfa1-adrnr,
lw_object TYPE drad-objky,
lw_doknr TYPE drad-doknr,
lw_return TYPE bapiret2,
lw_xcontent TYPE xstring,
client TYPE REF TO if_http_client,
url TYPE string,
lw_subrc TYPE sysubrc,
response TYPE REF TO if_http_response,
lw_message1 TYPE string,
sent_to_all TYPE os_boolean,
bin_filesize type i.
CONSTANTS: lc_dokar_srm TYPE drad-dokar VALUE 'SRM',
lc_type TYPE so_obj_tp VALUE 'RAW'.
CLASS-DEFINITIONS
DATA: send_request TYPE REF TO cl_bcs.
DATA: document TYPE REF TO cl_document_bcs.
DATA: sender TYPE REF TO cl_sapuser_bcs.
DATA: recipient TYPE REF TO if_recipient_bcs.
DATA: exception_info TYPE REF TO if_os_exception_info,
bcs_exception TYPE REF TO cx_bcs.
RANGES: lr_po_pr FOR drad-objky.
DATA: lw_banfn TYPE ekpo-banfn,
lw_bnfpo TYPE ekpo-bnfpo.
IF nast-nacha = '5'. "8
Create recipient and check if exist
Get email ID
start commented by sapnislina 21.12.06
SELECT SINGLE adrnr FROM lfa1 INTO lw_adrnr
WHERE lifnr = p_ekko-lifnr.
IF sy-subrc NE 0.
PERFORM protocol_update
USING '303' 'Address of Vendor:' ekko-lifnr 'not found' space
p_retco = sy-subrc.
EXIT.
ENDIF.
end commented by sapnislina 21.12.06
SELECT smtp_addr INTO CORRESPONDING FIELDS OF TABLE lt_recpt
FROM adr6
WHERE addrnumber = p_ekko-adrnr. "lw_adrnr.
IF lt_recpt[] IS INITIAL.
PERFORM protocol_update
USING '303' 'Email address(es) does not exist for vendor'
p_ekko-lifnr space space.
p_retco = sy-subrc.
EXIT.
ENDIF.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
use_otf_mc_cmd = 'X'
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = otfdata[]
doctab_archive = lt_doc
lines = lt_tline
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc <> 0.
PERFORM protocol_update
USING '303' 'PO Convertion from OTF to PDF failed'
space space space.
p_retco = sy-subrc.
EXIT.
ENDIF.
Get object description from mail title of output types
SELECT SINGLE objdes INTO lw_objdes
FROM tnati
WHERE spras = sy-langu
AND kappl = nast-kappl
AND kschl = nast-kschl.
CONCATENATE lw_objdes ekko-ebeln INTO lw_objdes SEPARATED BY
space
DATA L_TXT(255) TYPE C.
DATA L_TXT2(255) TYPE C.
CONCATENATE 'STO' EKPO-EBELN 'Created for' EKPO-WERKS '/'
EKPO-LGORT
'Supply Plant' EKKO-RESWK into l_txt separated by space.
lw_objdes = l_txt.
CONCATENATE 'STO' EKKO-EBELN INTO L_TXT2 SEPARATED BY SPACE.
APPEND L_TXT2 TO LT_TEXT.
APPEND lw_objdes TO lt_text.
Instantiate
CLASS cl_cam_address_bcs DEFINITION LOAD.
CLASS cl_abap_char_utilities DEFINITION LOAD.
insert by sapnislina 22.12.06
DATA : CONTENT_OUT TYPE SOLIX,
LINE_WIDTH_SRC TYPE I,
POS_OUT TYPE I,
POS_IN TYPE I,
LEN_OUT TYPE I.
DATA OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF CONTENT_IN,
LINE TYPE TLINE,
DUMMY TYPE TLINE,
END OF CONTENT_IN.
TYPES PDF_RAW TYPE X LENGTH 268.
FIELD-SYMBOLS <PDF_BIN> TYPE PDF_RAW.
DESCRIBE FIELD CONTENT_IN-LINE LENGTH LINE_WIDTH_SRC IN BYTE MODE.
REFRESH lt_data.
CLEAR CONTENT_OUT.
POS_OUT = 0.
LOOP AT OTFDATA INTO CONTENT_IN-LINE.
ASSIGN CONTENT_IN TO <PDF_BIN> CASTING.
MOVE <PDF_BIN> TO CONTENT_OUT-LINE+POS_OUT.
ADD LINE_WIDTH_SRC TO POS_OUT.
WHILE POS_OUT >= 255.
APPEND CONTENT_OUT TO lt_data.
CLEAR CONTENT_OUT.
SUBTRACT 255 FROM POS_OUT.
IF POS_OUT > 0.
POS_IN = LINE_WIDTH_SRC - POS_OUT.
MOVE <PDF_BIN>+POS_IN TO CONTENT_OUT-LINE.
ENDIF.
ENDWHILE.
ENDLOOP.
IF POS_OUT > 0.
APPEND CONTENT_OUT TO lt_data.
ENDIF.
end inserted by sapnislina 22.12.06
starting to create attachment to mail
TRY.
CLEAR send_request .
Create persistent send request
send_request = cl_bcs=>create_persistent( ).
Build the document
document = cl_document_bcs=>create_document(
i_type = lc_type "RAW
i_text = lt_text "def of output type
i_length = '12'
i_subject = lw_objdes ).
Attached the document object
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = lw_objdes "definition of output
type
i_attachment_size = '12'
i_att_content_hex = lt_data.
completed first part to attached PO (pdf format) as attachment
Now attach the PO related attachments to the mail..
.... need to read from table DRAD and get all the attachment per PO
at run time
REFRESH: lr_po_pr."lt_return.
CLEAR: lr_po_pr,lw_return.
MOVE 'ICP' TO lr_po_pr.
CLEAR: lw_object.
completed second part for PO related attachments
Now prepare to send mail
Add document to send request
CALL METHOD send_request->set_document( document ).
Get sender object
sender = cl_sapuser_bcs=>create( sy-uname ).
Add sender
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
LOOP AT lt_recpt INTO lw_recpt
WHERE NOT smtp_addr IS INITIAL.
recipient = cl_cam_address_bcs=>create_internet_address(
lw_recpt ).
Add recipient with its respective attributes to send request
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
CLEAR recipient.
ENDLOOP.
Send the document
CALL METHOD send_request->send
RECEIVING
result = sent_to_all.
Catch any exception
CATCH cx_bcs INTO bcs_exception.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
msg_arbgb = bcs_exception->msgid
msg_nr = bcs_exception->msgno
msg_ty = bcs_exception->msgty
msg_v1 = bcs_exception->msgv1
msg_v2 = bcs_exception->msgv2
msg_v3 = bcs_exception->msgv3
msg_v4 = bcs_exception->msgv4
EXCEPTIONS
OTHERS = 1.
p_retco = sy-subrc.
ENDTRY.
ENDIF.
IF NOT result-tdfaxid IS INITIAL OR " 422131
NOT result-tdmailid IS INITIAL. " 422131
CLEAR syst-msgv1. " 422131
IF NOT result-tdfaxid IS INITIAL. " 422131
syst-msgv1 = result-tdfaxid. " 422131
ELSEIF result-tdmailid IS INITIAL. " 422131
syst-msgv1 = result-tdmailid. " 422131
ENDIF. " 422131
CALL FUNCTION 'NAST_PROTOCOL_UPDATE' " 422131
EXPORTING " 422131
msg_arbgb = 'VN' " 422131
msg_nr = '095' " 422131
msg_ty = 'I' " 422131
msg_v1 = syst-msgv1 " 422131
EXCEPTIONS " 422131
OTHERS = 1. " 422131
ENDIF. " 422131
IF result-userexit EQ 'C' OR
result-userexit EQ 'E'.
p_retco = '9'.
ENDIF.
ENDFORM. " ENDE
end inserted
Regards
NislinaHi Nislina,
Could you please let me know how do you solve this issue.
Code:
if lt_binary[] is not initial.
* add attachment to document
call method document->add_attachment
exporting
i_attachment_type = 'PDF'
i_attachment_subject = 'My Attachment'
i_att_content_hex = lt_binary.
endif.
Thanks & Regard's
Sateesh -
I have to place a large number of PDF files. Sometimes I get an error: "Failed to open the PDF file". In the InDesign Forum I found that this also happens in the GUI from time to time and that the workaround is to turn on the Show Import Options. But this is obviously not an option for me.
Is there any alternative?
Thank you, RalfWhen you retry, is it always the same PDF?
Otherwise I'd play around like
- catch the error
- perform some potential cleanup of resources (files, memory), e.g. SaveAs, or a Close-Reopen cycle
- retry the same PDF
Dirk
Maybe you are looking for
-
Office 2013 deployment tool Invalid product ID error
Hi, Im in the process of virtualizing apps like Office 2013 with App-V. Downloading the binaries with the Office Deployment tool and converting to app-v package is very easy, I've followed this kb http://support.microsoft.com/kb/2915745 But now I wa
-
How to apply one animation to play 30 different images?
I'm brand new to Edge Animate and I'm struggling to find the answer to this. I have an image that comes on to the screen from the left, then stops, then user clicks a button and the image exits stage right and next image needs to come on from stage l
-
Format SWIFT MT940 for Brazil - Bank Statements
Dear all, Does anybody knows if is it possible to charge bank statements through FF_5 transaction, in Swift MT940 format, for BRAZIL company codes? Does it works? Recently we are try to receive bank statements automatically from the Citibank (CFX - C
-
How to connect iseries green screen from java program
how to connect iseries green screen from java program to get the data in the DB files ,here the DB is DB2/400
-
I believe I have a corrupted app, which is corrupting my phone or my phone is corrupted by some kind of malware. Does the diagnostics and data entry's show these as I have no clues as to what these entry's values or meanings are.. I believe a dating