PDF file looks fine on the monitor, but paths bond in print in both PS and non-PS printers.

Hi,
I have a printing from Illustrator PDF problem. I've got Illy CS4 in which I have a rather huge file with a map and I'm tring to print pieces of the map. The PDF looks fine on the screen, but there are straigt lines on the print leading from one end to the other of two longest paths in the file.
The problem occurs when saving through Scripts to PDF, Scripts to Poscript in Illustrator CS4 (with all updates) and CS5.1. I also went to a friend who is using CS5 and a PDF made with it also had paths bonded. The problem doesn't occur when saving the file to a low version of Illy, opening it in Corel X4 and printing from a PDF made in Corel. Funny enough I also made a multipage A3+ print of an older version of the file and two of the lines showed up on the first artboard, none on the middle one and only one line in the third one (see the photo below).
Guys at the printers and more advanced Illustrator users I've asked for help said the've never seen anything like this and have no idea what the problem is. Accually, anyone I know hasn't got a clue of what the problem might be.
Scans of test prints:
PostScript printer: http://imageshack.us/photo/my-images/28/cs4postscriptprinter.jpg/
Office non PostScript printer: http://imageshack.us/photo/my-images/11/cs4officeprinter.jpg/
PDF made in Corel: http://imageshack.us/photo/my-images/404/illycs4tocoreltopdf.jpg/
PDF from CS5: http://imageshack.us/photo/my-images/254/illycs5.jpg/
Multipage PDF: http://imageshack.us/f/444/dscf0712wn.jpg/
Any ideas of what I can do to print this properly? I'm pretty far from being an Illustrator expert and I ran out of ideas for fixing this and would really appreciate help...

Hi Scott,
Thanks for your reply. Print screen of the image I'm supposed to be getting in print, that is my PDF: http://imageshack.us/f/692/printscreenu.jpg/
In the first jpg below are the only lines which are supposed to be printed (marked in red). The problem is that apart of what I'm supposed to be getting in print (print screen of the pdf above), I'm getting the lines I've marked in yellow in the second jpg below and which are not drawn in my .ai file neither in PDF. They show up in print only.
PrintScreen of the whole .ai file: http://imageshack.us/f/833/wholefilewithartboard.jpg/
PrintScreen of the whole .ai file with additional lines: http://imageshack.us/f/32/wholefilewithliens.jpg/

Similar Messages

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

PDF file looks fine but prints fuzzy

Hi, I am making music books for a publishing company and we are having an issue with some PDF's. To let you know what we are dealing with I will provide you with some critical info.
I recieve 600 DPI scans as PDF's of books with music in them from our production crew. I take these files and I have to edit the layout of music on the last page so that there is room for our barcode. I insert the barcode and resave the file as a flattened 600 DPI PDF again. Then in Acrobat, I replace the old page, with the new page containing the barcode. The new page looks fine on screen, but when printed out it looks very fuzzy.
I have noticed that this also happens to our barcodes when importing pictures into Quark. I have tried saving the barcodes out as TIFF's and as GIF's (they are high contrast black and white, so GIF's have good quality and very low file size)at 600 DPI. Then we export PDF's from Quark and get the same problem with the fuzzyness.
Does photoshop have some settings for PDF's that will fix this? I am not even sure why it is doing this in the first place. I appologize for the long explanation but would rather have it be clear the first time. Any help you guys can give me would be great!
-JP

Okay thanks for the input, but when i try to import with images, instead of pages, it says there was a program error and it fails to import. Unfortunately I have to do these in photosjop first, because like I said in the first message, i have to edit the music on the page so that the barcode will fit.
The page is FULL of music, and we cannot simply shrink because that makes it harder for people to read the smaller notes. So I have to move the measures closer together, and sometimes I have to cut out extra space in the measures. If I were to do this in quark I would need to set up several different image boxes and then make sure they would line up properly. It is not very time effecient because I do dozens of these each day.
I have been playing around with the downsampling options and I am getting better results with that. I will post any progress I happen to find.

My RAW files look fine on my camera but turn darker with a purple tint on Photoshop and Bridge

I took some pictures at a gig last night, the lighting was quite good for a change and I was really pleased with how they turned out. The lighting at the gig gave all the photographs a red tint which I don't like but they were all bright enough. As soon as I opened them up in Adobe Bridge they all looked fine one minute but then gradually started to change to a much darker purple colour! I opened them up in Photoshop and they were the same. I then put the card back in my camera and they were fine again, brighter and more detailed with a red tint. When I opened them up in Bridge again they were dark! Any suggestions on why this is happening?

Here is what we're talking about:
In another raw converter, RawTherapee, the image is almost entirely magenta:
Likewise in a raw-analysis program called RawDigger:
Finally, in Canon's DPP software we can see the image is using the Portrait Picture Style:
But if we change the Picture Style to Standard, then the lighting appears to be more magenta, again:
Which is especially apparent if we brighten things a little:
So my analysis would be that the Adobe Standard was a reasonable rendering of the raw data and camera white-balance, it's just that the camera was set to some non-standard settings, so corresponding adjustments needed to be made in Adobe software to match.

CHM file looks fine on my Desktop - but Topic contents missing in Dropbox

When I try to zip the .CHM file and mail it to the developer or when I upload it to Dropbox everything seems to be fine. The file is 5.8 MB (72 Topics)
But when he tried to open it all he sees are the purple "books" and the individual Topic Titles - but the Topic pages are not appearing.
What am I doing wrong?
He also needs the mapping numbers for all 72 Topics. I generated these - now how do I send them to him?
Where is the file I need and what is it called (BCCSDefualt.h ?)
I am using RoboHelp 10 on a Windows 7 computer - haven't used RoboHelp in 6 years so I am very rusty!
Peter Thayer
Thayer Birding Software

Hi there
It's because of the security restrictions Microsoft implements for CHM files.
Have your recipient save the file to their local hard drive before opening it. If there is still no content visible after doing that, they will need to "unblock" using the instructions at the link below:
Click here to view
Cheers... Rick

Weird: Backup file works fine from the network but not when moved into sandbox environment

We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've
tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move
the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Any thoughts? Has anyone seen this before? Any idea? TIA,
Raphael
rferreira

Original server that generated the .bak file:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64)
Jun 11 2012 16:41:53
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server where I CAN restore the .bak file from the network location (not inside the sandbox):
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server inside the sandbox where I get the error when attempting to restore the backup:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64) Jun 11 2012 16:41:53 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
rferreira

My avchd video I imported looks great on the monitor, but once I run it through iDVD the quality of video on my HD tv is much less than I had on the monitor

Hope you can help. I imported AVCHD video into final cut express 4, Ive used the broadcast safe filter, and others in the final cut color correction suite. but to no avail. When I export using quick time, and burn the DVD in best performance, the quality of the video is much less on my HD TV than on my monitor during construction.
Im looking for some insight here.
My DVD player is pretty cheap, but movies I buy are crisp and clean, my video looks blotchy and cheap.
I tried using iMovie and got the same results
Jeff

Hi Jeffrey. You're probably going to get a lot of comments as to the fact that DVD is not HD quality. It's resolution quality is much lower than actual HD and there's a lot of compression going from HD footage to standard definition of DVD. You might experiment with BluRay if you can get a BluRay burner to work with your mac or burn a BluRay project using Toast on your mac. You can search the forums for more informaiton.
I've been experiencing some of what you're describing for years. I also agree that the overall video quality going from HD to iDVD is just not as good as it's expected to be. The commercial DVDs use complex compression techniques and of course are shot with perfect lighting and equipments,
Make sure you're exporting your FCE project (not self-contained). In iDVD use professional quality unless it's a really long video. Check the iDVD forums for more informaiton about that. Good luck and I wouldn't expect any improvement from iMovie. iMovie is more targetted towards online viewing rather than DVD...

Pages 09 poster only prints as black and white but color looks fine on the screen

The original template my poster was based upon prints in color, I can print other documents from pages in color without issue, and even if I print to pdf (which looks fine on the screen) and then open the pdf in preview and then print, it still prints black and white.
Um, and yes, it's a color printer and it's a standard 8.5x11 paper, so there's nothing too weird there. It looks totally fine literally everywhere except paper, and I have no other issues with any other documents, even really similar ones, that I have sent through the same printer.
I sent the same pdf file to a local copy shop and it printed just fine.
ACK! Please help!

I can't find anything that is print to black & white or grey scale in the document rules or anywhere else, and since the printer prints it as a pages document AND a pdf as black and white--but someone else can print the same PDF file in living color on their printer without any issues, I'm stumped.
Without changing anything, I can print any other document, jpg, web page, or anything on the same printer (including the same apple template) and the colors are fine...but then this one prints in b&w.

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix it? I'm trying to upload the PDF version to Vistaprint. Thanks.

Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
== When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

Brilliant! Problem solved! Thanks so much.

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

When I try to open a pdf file I get an error message stating "There was an error opening the document. The file is damaged and could not be repaired." Other pdf files open fine.

You need to get a new copy of the PDF.

I have imported a document from my old Windows PC but on the Mac the text is misaligned and the pictures are gobbledygook. It looks fine on the thumbnail. How do I see my documents in Mac as they appeared in Windows?

I have imported a document from my old Windows PC but on the Mac the text is misaligned and the pictures are gobbledygook. It looks fine on the thumbnail
on the desktop. How do I see my documents in Mac as they appeared in Windows?

To view it in an acceptable format, yes. You can try using an opensource program such as OpenOffice or LibreOffice and see if it yields better results. However, I'm sure if it would be compatible with a document made with word processing software from 9 years ago, but I would certainly give it a try.

HT1926 Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix

Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix?

Hi Richmoller51,
Welcome to Apple Support Communities.
See this article for some troubleshooting steps that can help with video playback in iTunes or Quicktime:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Best,
Jeremy

If a pdf file is written in indian language but prints off in a different language, what could be the issue?

if a pdf file is written in indian language but prints off in a different language, what could be the issue?

Most likely the issue is non-standard fonts. Are all used fonts embedded in the document?

PDF file looks fine on the monitor, but paths bond in print in both PS and non-PS printers.

Similar Messages

Maybe you are looking for