PDF file not displaying properly.

I have a pdf file this is being creating in outside software. The file displays perfectly fine in adobe 11. However when i open the file in Acrobat 9 certain pieces are missing from the file

David ,
The file on the right side is accessed in Adobe Reader.
The file on the left side is accessed in Adobe Acrobat .
Both are different software.
Does this happen with this PDF or any other PDF as well?
Which version of Acrobat are you using?
This screenshot would unfortunately help us recognizing the error .
It would be great if you could share the PDF with us so that we could figure out what' going wrong.
Also ,where and how is the PDF created?
Regards
Sukrit Dhingra

Similar Messages

Edited pdf does not display properly

I scanned in doc to a .pdf. It displayed properly on iPad (iBooks). I added some text using preview. It did not display when reading it to iBooks. Thinking it was a layering issue, I "Flattened" the file with Adobe Acrobat Pro, and freaked it to iBooks. Still does not display the added text. Added text is displayed by Adobe Reader for iPad. How do I get the iBooks program to properly read an edited .PDF? Is it really necessary to print and rescan the .PDF each time? Can I add the text in IBooks?

Stick with Adobe Reader. iBooks will not and cannot display form fields or edited text in a PDF as you have learned. You cannot add text in iBooks either. You can't change that. The built in mail app is also incapable of displaying edited PDF files. Adobe Reader is much more robust and feature rich than iBooks, which I'm sure you have already seen for yourself.
iBooks pales in comparison as a useful PDF tool. i think that you will be much better off using Adobe Reader.

DW8 files not displayed properly in DW CS3

Any help will be greatly appreciated in the following
question:
I've been using Dreamweaver 8 successfully in creating and
maintaining several websites. However, when I try to use the newly
purchased Dreamweaver CS3 on HTML files previously created on DW8,
the files are not displayed properly (all elements are jumbled up
together in the "Design" view). But, when I do a "Preview in
Browser", the pages are just fine.
Has any other DW user had similar experiences and if so, any
solutions?
Thanks for any help out there!

DWCS3 is much less tolerant of code mistakes than was DW8,
and your symptoms
suggest that this may be the cause of your problems. Do the
DW8 pages
validate when you go here -
http://validator.w3.org?
Can you post a link to some of these pages?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bill168" <[email protected]> wrote in
message
news:g559nv$bc3$[email protected]..
> Any help will be greatly appreciated in the following
question:
>
> I've been using Dreamweaver 8 successfully in creating
and maintaining
> several
> websites. However, when I try to use the newly purchased
Dreamweaver CS3
> on
> HTML files previously created on DW8, the files are not
displayed properly
> (all
> elements are jumbled up together in the "Design" view).
But, when I do a
> "Preview in Browser", the pages are just fine.
>
> Has any other DW user had similar experiences and if so,
any solutions?
>
> Thanks for any help out there!
>

PDF files not displaying correctly

I have adobe reader 8 and my operating system is Vista. Every time I try to view a PDF file my screen gets messed up. My color quality goes from Highest 32 bit color to the lowest setting. I then either have to reboot my system, or go into my NVIDIA display properties and reset to to highest 32 bit color quality. my resolution is 1440x900. Why are my PDFS not displaying , and my color quality keep going to lowest, every time i use PDF?? .I

When I try to initiate Adobe Reader 8.1 in vista the window opens then immediately closes. Also when I try to open any PDF file the system locks up and I have to close whatever program is running from Task Manager. I have uninstalled old versions and reinstalled Adboe Reader three times with no error messages and no problems. I'm the system administrator so this should not be an issue. Help!!
Thanks!

Colors in pdf files not displayed correctly on linux acroread

I have recently observed that the colors in certain pdf files are not displayed correctly in acroread on Linux. Other readers such as evince get it right. Examples are a presentation with white arrows on a black background which come out as black on black. I suspect, but have not proved, that the files were produced on Mac OS. I see this in acroread version 9.5.1 on a couple of versions of Linux. I googled this but could find no-one else mentioning it. Has anyone else seen it. Looks like a serious bug to me.

Does this happen with other PDFs on the server? You might check out the Adobe forums.
Regards, Tim

How can I make .PDF files not display inline in an Outgoing mail?

I want Mail to NOT display PDF files in outgoing messages. It will keep the icon placeholder if it's more than two pages, but not for one page PDFs. How can I stop this? It makes formatting kind of difficult.
Thanks

I knew. But I'm hoping for a way to make this the global default since ages...

PDF files not displaying at all

I try opening pdf files with the firefox pdf reader plugin but that doesn't work. The only way I can view pdfs is to either save the link and open it manually or use internet explorer to view the pdf.

You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer.
You can check the value of the plugin.disable_full_page_plugin_for_types pref on the about:config page and remove the application/pdf part if present or reset the pref to the default via the right-click context menu.
*http://kb.mozillazine.org/about:config
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them

PDF files not displayed on View Output via Citrix

Running OraFin via Citrix, we are generating custom AR invoices as XML converted to PDFs via XML Publisher then are attemping to view the invoices as PDFs in Adobe Reader. The process works fine for the most part, but some users find that the ability to view the PDFs stops suddenly. IE displays a blank window without any indication that Adobe Reader is being called. The problem persists until we kill the Adobe Reader process for that user (AcroRd32.exe) using the Citrix server's Windows task list utility. The problem has not occured outside of Citrix. Anyone have this experience? Any advice on what might overcome the problem?

Does this happen with other PDFs on the server? You might check out the Adobe forums.
Regards, Tim

File not displaying properly when launched

Hello, I'm using Cp6, Windows 7, Flash 11.9 and have a question. I've created a cptx file for an overall tutorial. I've inserted a video (Mp4) that I careated with Cp6 and published as an Mp4 file. I inserted it via Video>Insert Video and chose Event Videof
When I publsh the overall tutorial cptx file which is SCORM 1.2 enabled I get the expeced set of files in the zip folder. I tested playing this tutorial in SCORM Cloud, IE, Chrome, and FireFox with success. The overall tutorial plays as expected and the video plays as expected.
When I handed off the zipped published files to somone to load in their LMS, everything works fine except when the Mp4 file is played, it launches fine, displays the first screen fine, and then continues to play however all of the screens after the first screen appear almost transparent. And I believe the file the LMS people are loading is the Index_SCORM HTML file. They said that's the one they upload to their LMS.
I have looked throughout Cp6 for a "setting" that would cause this "dimming" effect starting on screen 2 and do not see anything.
Here's a sample of the code the LMS people sent. They think it cold be because of this opacity setting or value.
How is this opacity setting triggered in Captivate 6? If it is this, any suggestions on how to resolve it? Do you think this is what's causing the MP4 video to start dimming out on slide 2? Again, this doesn't happen on any of the other files in the published folder such as the SWF file and it does not happen when I test the entire published zip folder on SCORM Cloud.
Thanks a ton!

If you SCORM package as published from Captivate works perfectly well in SCORM Cloud then the issue is most likely with your client's LMS or the way the people administering it have loaded the course.
In any SCORM complian LMS I have worked with, the file that the LMS wants to look at first is NOT the index_SCORM HTML file. It's the imsmanifest.xml file. That's the file that tells the LMS what assets to load and how the links in the LMS's SCORM Player TOC should be set up. The user should be launching the SCORM package via the link in the LMS TOC. My suspicion is that your LMS is not launching the content correctly and some of the required JS files are not being loaded.

Links in pdf file not working properly (in Acrobat Reader)

Hello everybody
I'm converting a book I wrote from mobi to pdf with Calibre. While formatting the document, I used some html, including a few links between different parts of the same document.
However, when I test the pdf document in Acrobat and I click on links, they always send me about a page before of what I marked with the a name attribute... This doesn't happen when I try the book on the calibre pdf reader...
I've been looking around but can't find why. I've checked my book on mobi, and everything is OK there. This only seems to happen on the document itself on with the way Acrobat reads it.
Any ideas or explanations?
Thanks!

You might want to check with Calibre about the issue. If you had Acrobat you could reset the bookmarks. Since Adobe created the initial PDF document standard, I have seen this in PS files where bookmarks were placed on a page before any content was placed on the page. The bookmark was in the limbo area were a page might not exist if no content were added to the page.

Pdf files not opening properly since updating to 1.7.1.418 only happens with security locked files

I've saved a file in pdf format from Illustrator with a security lock & now it wont open in Photoshop. I've only had this issue since updating to version 1.7.1.418

Wouldn't it be a good idea to completely invalidate the applet cache in the JRE installer?Yes, I guess it should be an option for user of the app on first start after upgrade, not for the JRE installer. There are many large applications that users would want to avoid re-download.
From the log, there is some hidden exception during first launch. The best way to proceed is to file a bug, including some guest/debugging access to the game.

OSX 10.7.2 Nikon NEF files not displaying properly in finder cover flow?

Since installing Lion, the finder in cover flow mode no longer displays hi resolution previews of Nikon NEF files (but works fine with PSDs). Has anyone else had this problem?

iPhoto is fully updated.
I do not have Aperture installed.
I also use a Canon 400D dslr. I have no problem viewing Canon's RAW files' previews in Cover flow mode.
But my NEF files from Nikon are the ones that appear in low resolution. Canon RAW files appear perfect.

Externally edited files not displaying properly in Aperture

I've edited some pictures in my default exteranal editor PS CS3 to take advantage of layers and some filters. When I see the thumbnail in the stack or when I try to view it in a bigger view window it looks as if one of the PS layers is acting like a mask and I can only view part of the image through the mask window.
I've tried resaving the file in PSCS3 and even making some small alteration so it is an actual new file but it's the same thing? It's a bummer because I've done a lot of work on them and would like to view them along with my other photos.
Does anyone else have this problem?

From the way you are describing the display issue this sounds like a bug that I have been screaming at Apple about for about 9 months. The bug is in CoreImage and effects everything in OS X that uses the coreimage library to display PSD files.
The issue is caused by having ANY saved alpha channels in an image, these are either created manually by you or automatically by saving a selection. Check the PSD in photoshop, click the channels tab and look for any channel that is not part of the color model itself, if one is there it is causing the display issue. If you do not need this channel then just delete it, if you must have it for some reason the work around is to load the alpha channel into a blank layer layer mask and then get rid of it. If you need it back reverse the process. Bottom line if you have a save an alpha channel it will display all wild and crazy everywhere in OS X that uses core image.
RB

Pdf does not display properly in safari

Something changed. My Safari now displays pdfs as gobbley gook. Other browsers have no problems. Please help!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Security
and check the box marked Allow other plug-ins.

Swf file not displaying properly on webpage

Flash Player version 9.0.115.0
Website designed with Dreamweaver 4, Flash 5
IExplorer version 7.0.5730.11
Windows XP Pro
When I preview (using IExplorer 7) in Dreamweaver 4 and
Dreamweaver 8, the swf file looks fine, however, when I go to my
website page, the swf has a white background instead of the green
background it should have.
I do not know if this is an IExplorer 7 problem, MSN Explorer
problem, or flash player problem. My husband has IExplorer 7 and
the Flash player 9.0.115.0 on his computer and it does the same
thing. The computers at our computer centre are using IExplorer 7
and MSN explorer, but I think the flash player is 8 (not absolutely
sure on that - will have to check when I can get there). When I go
to my website there, the swf files look as they should. The site I
am talking about is
http://dodgecoveartsguild.com
The coding I have for one of the swf's file is:
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
width="225" height="75">
<param name=movie value="star.swf">
<param name=quality value=high>
<embed src="star.swf" quality=high pluginspage="
http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="225" height="75">
</embed>
</object></div>
The fla/swf files are at the root directory of the site
How do I fix this? Any help would be appreciated.

How do you know if your table and column attributes are correct?
If I put a static graphic in the Flash file area, it looks fine.

PDF file not displaying properly.

Similar Messages

Maybe you are looking for