PDF file not readable when burnt on DVD as an additional asset

I have made a disc image of a DVD I want to burn multiple copies of. I have included a PDF asset on the DVD. When I burn the DVD using Disk Utility the DVD burns satisfactorily. However, when I attempt to open the .pdf file, I get the following message: The file “File_name.pdf” could not be opened. It may be damaged or use a file format that Preview doesn’t recognize.
I can't seem to get the .pdf to burn on the DVD properly. Any suggestions.
Thanks,
Andrew

Try changing the file name of the pdf. If that doesn't resolve the issue then you may have a corrupted file. That or the machine you are using to open said file may need to be updated via apple's software updater.
Hope this helps but if not just come on back.

Similar Messages

  • Hyperlinks to pdf files not working when project is exported out as SWF and uploaded to server

    hI all
    I'm using CS5 and i have hyperlinks to pdf files in my indesign project. However when i export to SWF, although the links work locally, they do not work when i upload all the relevant folders and files and test it from a server the links to the pdfs can not be found, the error messages indicates its looking for the files on my hard drive. I have also noticed that if i copy all the relevant folders and files and exported swf to a different directory and then launch swf from there the links do not work there either.
    Other than seperately uploading each pdf indvidually on to the server and then creating a hyperlink to it from the local indesign project i don't know what else to do.
    Any advice much appreciated.

    I have your same problem, but didn't consider uploading the PDFs and then linking to them. I'm willing to try it. Let me know if you ever found a better way, ok?
    Thanks.
    Lynn

  • Mac PDF files not readable on PC

    I am constantly getting messages from my PC friends that the photoshop files I create and then convert to either pdf or jpg are not readable on their pc. Sometimes the files are split into two files (one very small and the other large) with the same name. The larger file is usually able to be opened.
    What can I do to make my proofs easier to read for pc users? This has gotten frustrating.
    Thanks for your help.

    The problem is that I cannot control what version of Adobe the person is using who I'm sending the file to. This has been hugely embarrassing to me as I've been sending out files with my work. Some of the recipients were kind enough to point out that the file seems corrupted, others simply put me on a "waste of time" list.
    I've tried it on my windows machine, and using Acrobat Reader 8 and Acrobat professional 7.0. The text appears as little circles and the file is not readable.
    On the Mac, I can reproduce the problem, too.
    Adobe Illustrator (version CS) cannot read the file. Warnings are:
    The font Univers-BlackExt is missing.  Affected text will be displayed using a substitute font.
    The font Univers-BoldExt is missing.  Affected text will be displayed using a substitute font.
    The font Univers-Condensed is missing.  Affected text will be displayed using a substitute font.
    The font Univers-Extended is missing.  Affected text will be displayed using a substitute font.
    The font Univers-ExtraBlackExt is missing.  Affected text will be displayed using a substitute font.
    The font Univers-Oblique is missing.  Affected text will be displayed using a substitute font.
    To preserve appearance, some text has been outlined.
    Acrobat 6.0.2 Professional cannot read it on the Mac
    Acrobat Reader 8.1.7 on Mac has no problems with it. It displays perfectly, just like under Preview.
    But this is somewhat beside the point. A PDF file should be portable, so once I have one there should be a way to make sure it can be read by all Adobe products that can read PDF. How can I make sure?
    Given that I can see everything perfectly on my Mac (e.g. using Reader 8.1.7), how can I ensure the same can be seen by any other user on any system reading a PDF file? I guess that this has to do with your (Adobe's) PDF specifications. How can I "enforce" those?
    Many thanks!

  • Scanned pdf file not readable

    When I scan my document and it goes into the export PDF it is not readable?

    Do you get an error message?
    [topic moved to ExportPDF forum]

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • PDF Files not printed

    Dear all,
    r12.0.4.
    solaris 5.10
    bash-3.00$ which pdf2ps
    /usr/bin/pdf2ps
    I can able to print text files in the printer properly. When am printing PDF files am getting
    the error :
    PDF Files not printed
    128mb Of Memory Is Required To Enable Direct Printing
    For which, I followed the note :
    128mb Of Memory Is Required To Enable Direct Printing- 742579.1
    As per the note, file pasta_pdf.cfg is changed to
    bash-3.00$ diff pasta_pdf.cfg pasta_pdf.cfg_orig_Mar17
    122c122
    <         #preprocess=pdftops {infile} {outfile}
    preprocess=pdftops {infile} {outfile}124c124
    <          preprocess=pdf2ps {infile} {outfile}
    ; preprocess=pdf2ps {infile} {outfile}Made the following change in arguments of PASTA_POTRAIT
    FROM
    -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIESTO
    -pn$PROFILES$.PRINTER -f$PROFILES$.FILENAME -c$PROFILES$.CONC_COPIES -Fpasta_pdf.cfgBounced concurrent managers, still we are getting the same error.
    Any idea ?
    Kai
    Edited by: KaiS on Mar 18, 2009 3:13 AM

    Kai,
    Do you have pdf2ps presented in the PATH of applmgr user?
    Did you run the concurrent program with (number of copies = 1)?
    Regards,
    Hussein

  • "File not readable" error in CS6

    I've opened the file, worked on the file, saved the file and suddenly I'm getting a "File not readable" error upon open. Running CS6. One file was saved out to CS5 compatible. Created another test file and it saved out and reopened without issue.
    Mac Yosemite. Only update done between opening was an Adobe Flash Player, which really shouldn't affect this.  I've also tried pulling the file again from my cloud account to see if it was corrupted on my desktop...same issue.
    Anyone having this issue and know how to solve for it?

    skredberry,
    Are you saving to your own harddisk?
    It is always recommended here to open/save your documents from/to your own harddisk, then copy to external media/servers/whatever as backup.
    You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk.

  • File not readable

    I have been working on my sister in laws wedding imovie project and now when I try and open it, it says file not readable. I can open other saved movies and when i tried to start a new one and saved it, the new one is also saying file not readable. Is there any hope? Can I fix it so I can do a new one?

    The project has probably been damaged, usually the result of emptying the iMovie trash. If you'd like me to try to rescue it, see my note here:
    http://discussions.apple.com/thread.jspa?messageID=1329742&#1329742
    If a project is unreadable, it may be (indirectly) affecting your trying to open the new project, causing you to conclude it is unreadable too.
    Double-clicking on the iMovie application to launch it — or single-clicking on iMovie in the Dock — normally causes iMovie to open the most recently-opened project. The name of that project is saved in the iMovie preference file.
    iMovie may be repeatedly trying to open the corrupt project instead of the new one, creating the (false) impression the new project is corrupt too.
    It's also possible iMovie is damaged, but that doesn't usually cause iMovie to complain it can't read a project. It just fails to open.
    My guess is the problem is limited to just one project. To find out for sure, double-click on a project you KNOW is okay to open iMovie, create a new project, save it, quit iMovie and re-launch iMovie. If the new project opens, everything is okay, but the corrupt project needs fixing.
    Karl

  • What does "File not readable" error message mean?

    I am trying to copy/paste art from a supposed "corrupt" file into a brand new document.  When I paste, I get this particular error message: File not readable.  What, exactly, does this mean?

    Amanda,
    It is nice to know that it works now. Thank you for letting us know.
    Actually, the solution was identical to this part of the list in post #3:
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup;
    I ruled that out because in post #2 you wrote
    I have tried EVERYTHING ... Dumped the preferences....
    Ctrl+Alt+Shift/Cmd+Option+Shift is the standard way of deleting = resetting = dumping the basic preferences so I was convinced you had done that already (hence my suggestion to start with 4 and skip 1) - 3)).
    Actually, when you
    4) Move the folder with Illy closed;
    as suggested in post # 3, you move all the preferences to another place so that they are reset to the defaults when you open Illy next time; this procedure is more thorough (and therefore capable of solving more issues) and reversible so you can get the preferences back if it does not help.
    I presume you did not try 4).

  • I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

    I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

    See:
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • PDF File not opening in browser for sharepoint 2010

    Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
    it always open in browser
    I have already made following changes but didn,t work
    Set browser file handling to Permissive from central admin
    Set "open in browser" in setting s of doc library
    Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
    Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
    Installed Adober eader in client machine
    Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
    It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

    It would be handy if you didn't double post too.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
    To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you.  The solution 2 Powershell that deals with updating the Inline MimeType may help.
    http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Why does FCP error "File Not Found" when I try to open my sequences????

    I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

    I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
    In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
    Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
    I hope this helps. Now it's time to play "catch-up"
    Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT   Mac OS X (10.4.8)  

  • PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre.  It was working fine until today HELP!

    PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre.  It was working fine until today HELP!

    What is your operating system?  Reader version?  Are these local or online PDFs?  If online, in what browser?
    Can you post a screenshot: https://forums.adobe.com/thread/1070933

  • Pdf file not opening on pushing fdf file with F key in Adobe  Reader

    Well i am a novice developer in case of PDF Development.
    The problem which i am facing is:-
    In our application a PDF document submits the data to server and server sends back FDF to client with f key as http path of PDF which is present on web server.
    This all works well in acrobat professional 7.0 but in abobe reader 8.0 the PDF file doesn't open up on pushing FDF.
    On debugging the problem i found out that if server sends response within 480 milliseconds then reader is showing the pdf otherwise it don't shows up.Since in our application it will always take more than this time because of several operation performed to serve the request posted to server,So the
    PDF will never show up in case of reader.
    I was unable to understand what make it special in acrobat professional that session lasts more than 480 milliseconds whereas in reader the session doesn't last that long.
    I really need uregent help on this.
    Thanks in advance for help.

    It would be handy if you didn't double post too.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
    To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you.  The solution 2 Powershell that deals with updating the Inline MimeType may help.
    http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • PDF files break up when scrolling down the page

    Embedded pdf files break up when scrolling down the page i.e.
    http://www.wight-cam.co.uk/WightCAM/HTML/2011/110321.htm

    Go to the "inspector"-click on the "table" icon-then "headers and footers" where you can set the number of headers or footers you want and click/unclick "freeze". You can also do that directly from the button bar on the "header-footer" buttons

Maybe you are looking for