Pdf files are generated at update

Hello all,
I'm new to RH. When generating the help file (first time around or during subsequent updates), RH generates a pdf file for each page of my manual. Can someone tell me where this is disabled? Thanks so much.

Hmmm, apologies as I'm lost on exactly what you are doing. Are you familiar with Jing or ScreenR?
http://www.techsmith.com/jing.html
http://www.screenr.com/
These apps allow you to record what you see on the screen and provide a link that allows others to watch the recording. I suggest these because I'm thinking in your case it might be beneficial for us to see first hand what you are seeing.
I promise that I'm not trying to be intentionally obtuse here.
In RoboHelp, I know we can establish links between Microsoft Word documents and Adobe Framemaker documents and update those links when the source content changes so it updates accordingly in RoboHelp. But I was unaware the same could be done with PDF. I'm also confused about your mention of seeing a PDF file for each "Book", so hopefully by showing us what is happening it will make more sense on our end.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

PDF files are not opening in IE!!!

Some PDF files are not displayed while opening in browser IE . The PDF files are generated through servlets (JWS 2.1). While analysing the problem we have found that the one request invokes the doget() method of the servelet more than once. This problem is not appearing in netscape.
Please give suggestions.

I am having the same sort of problem. I have a form posting to a servlet that displays a pdf based on the vars posted to it. My doPost() calls doGet(). When I post to the the servlet the doPost() is called and then it calls the doGet() and then SOMETHING else calls the doGet() again. Since the vars that I am using to load the pdf are posted they are out of scope for the second doGet(). I tried two things to fix this:
I changed my doPost() method to do nothing but check the request variables and hold on to them. Then I changed my doGet() to use the values that I held instead of the request vars. This only worked sometimes.
Then when I rolled all of my code back and changed my form from POST to GET everything worked fine. It seems that there is something that causes the browser to always call the GET when you are using application/pdf. If my doPost() calls my doGet() everything is lost on the second doGet()

My pdf files are messed up since updating to lion os.

I cannot edit certain boxes in my pdf files anymore since the update. I use to be able to do whatever I wanted before the update.

Are the files "locked"? If so, you may need to "unlock" them first. In the Finder, duplicate some of the PDF files and test it. Don't use Duplicate in Preview.

PDF files are stored to /usr/sap/ SID SYS/global

True or False --> When a PDF file is generated from within SAP the spool file is stored in /usr/sap/<SID>SYS/global
After a recent upgrade to ECC 6 I'm noticing that a large number of SPOOL* files are in the global directory. Each spool file has 3 components a SPOOL.cfg, SPOOL.xfd and a SPOOL*.ps file .When I examine the spool number using SP01 I see that these jobs all have an output type of PDF. Only files of type PDF appear in the global directory. It does not matter which output device is used. No output device in my system is defined to write to the global directory. Everything is set up to store files to the database.
My assumption is that the generation of a PDF format requires a temporary storage area to convert the data from the "Device Type" setting for the printer (such as Postscript or HPGL) to the PDF format and that the /usr/sap/<SID>SYS/global directory is used for this purpose.
Is there a parameter setting that allows me to modifiy this "conversion" location?

Assumptions:
---> You are running on Unix - I don't have instructions for Windows, but they would be analogous
---> Your System ID is TX1
---> 2Gb is big enough to hold your Adobe files
1.) Create a 2Gb file system named /AdobeFiles
2.) Create the required directories under this new file system
- For example: /AdobeFiles/300ADSP
3.) Verify that the user <sid>adm can write to the directory created in step 2
4.) Apply SAP note 1327372
5.) Rename the filesystems that SAP note 1327372 creates
- For example: mv /usr/sap/TX1/SYS/global/300ADSP   /usr/sap/TX1/SYS/global/300ADSP-ORG
6.) Create a symbolic link for the required directory to the directory created in step 2
- For example: ln   -s   /AdobeFiles/300ADSP /usr/sap/TX1/SYS/global/300ADSP
7.) Test your link
cd /usr/sap/TX1/SYS/global/300ADSP
touch TestFile
cd /AdobeFiles/300ADSP/TestFile
Your file should have been created in /AdobeFiles/300ADSP

All my Adobe Reader (PDF) files are opening only in the secondary monitor by default, as I am workin

I am using Adobe 8 Professional and working on Windows XP. I have been facing an issue lately with opening files in a dual-monitor environment. All my Adobe Reader (PDF) files are opening only in the secondary monitor by default. There are times when I work only in one monitor and when I open a PDF file and want to have a look at it, I have to connect another monitor to view that file, since this file is open in the secondary monitor. It is very disappointing with such instances happening with Adobe (a leading organization). Can you please help so that the Adobe Reader files open in the primary monitor by default?

On a Windows system disable the preview of Windows Explorer.

PDf files are not directly coming in search results, rather coming as a list item \

I have shared search from one farm and 2 other farms are consuming it. PDF search is working fine for one consuming farm but for the hosting farm and the other consuming farm it is showing the result as list item but not as a direct link to the document.
Any suggestion pls
When the other consuming farm uses the own dedicated search service then pdf files are coming in search result but when it is pointing to the shared proxy it is not working. But for one consuming farm it is working fine.

Hi ,
Whether you crawled the same content source using the Shared Search service application. If not, please crawl a same content, test again and compare the result.
In addition, whether you configured PDF correctly for the Shared Search, please try to configure it again as the link:
http://www.codeproject.com/Articles/82546/How-to-configure-PDF-iFilter-for-SharePoint-Server
Here are two similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/fb170ef6-d0fc-4044-a54d-87695066a5d2/search-results-pdf-files-showing-item-not-link-to-document?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/en-US/c540b280-135a-43ba-91b6-d8e408df25dd/search-returning-link-to-dispform-instead-of-the-link-to-pdf-document?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I can't open PDF files, can't open, update, or download Adobe Reader ( I had it until recently) and don't have an "edit options"

I can't open PDF files, can't open, update, or download Adobe Reader. (I had it until recently.) None of the "helps" seem to help. I can't even open Adobe Reader now.

Ignore the instructions about "edit options", to install Adobe Reader download the installer from http://get.adobe.com/reader/ and run the installer. Alternatively, a direct link for the latest version of Adobe Reader is:
http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.4/enu/AdbeRdr934_en_US.exe
The following article should help you set it up - [[opening PDF files within Firefox]].

PDF files are unreadable

I am currently using Adobe Reader 9.2 on a windows xp system. For many years I had no trouble with Adobe Reader.
Currently many pdf files are completely unreadable, with some headers appearing normally, but most sections filled with garbage - random appearing ASCII characters. You can see this in the attached jpg file.
Oddly enough, if I copy part of the garbage text from Adobe Reader and paste it onto a text reader like Notepad, the text comes out perfectly readable. Also, pdf documents that are produced in a more photographic (non character) form are perfectly readable.
I have uninstalled and reinstalled adobe Reader twice with no change in program behavior. I assume that I have a mysterious font conflict, but I can't figure it out.
What is going on?

The files are not corrupted; if I forward an unreadable pdf to another email address and an unaffected computer, the pdf file is completely readable.
Attached is the header of a typical pdf file opened with a text reader.

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

JavaScript files are not being updated while updating managed solution over Dynamics CRM Online

Hi Support,
While I am updating a managed solution over Dynamics CRM 2013 Online, JavaScript files are not being updated and is showing the source as of the last version of the managed solution.
I tried the same versions of solution on my CRM 2013 on-premise install (test organization) and it updated successfully.
This is a bit urgent issue. Please suggest how to resolve this.
Online version of the CRM is
Microsoft Dynamics® CRM Online Spring '14
(6.1.1.1855) (DB 6.1.1.1847)
blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

Images and js files within a deployed war file are generating 404 errors.

Greetings,
I have an odd situation in that image files and js files that are part of a deployed war file are generating 404 (not found) errors when accessed via https but ARE found when accessed via http.
Unfortunately we are required to use https.
I have verified via jar -tf that the files are indeed part of the war file. So, it is not that they are missing as is evident when accessed via http. (they appear as expected)
A work around is to create the sub directories under the document root, on the ohs, and populate the sub directories with the images and js files that were used as part of the war file build. While this works, it doesn't explain why they would generate a 404 error when referenced from within the war via https.
The war file works correctly on our 10g installation.
I also have a very simple deployed war file and it too seems to have an issue finding direcotries/files that are part of the war file when referenced via https but not http.
We are using Oracle 11g OHS and using the WLS Admin Console to do the deploying. We also are using the OSSO for the performing the required authentication.
I have an SR in with oracle and have been working with them but I thought I would post here too.
Suggestions?
Thanks in advance.
Edited by: emmett on Jan 5, 2011 2:47 PM

Don't crosspost. Continue here: http://forum.java.sun.com/thread.jspa?threadID=5251627

Numerous trace files are generating every minute causing space issue

Hi All,
numerous trace files are generating every minute <SID>_<PID>_APPSPERF01.trc format.
entry in trace file will be like..
EXEC #10:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1734896627,tim=1339571764486430
WAIT #10: nam='SQL*Net message to client' ela= 6 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764491273
FETCH #10:c=0,e=0,p=0,cr=2,cu=0,mis=0,r=1,dep=0,og=1,plh=1734896627,tim=1339571764486430
WAIT #10: nam='SQL*Net message from client' ela= 277 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764491806
EXEC #11:c=0,e=0,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=2638510909,tim=1339571764486430
FETCH #11:c=0,e=0,p=0,cr=9,cu=0,mis=0,r=0,dep=0,og=1,plh=2638510909,tim=1339571764486430
WAIT #11: nam='SQL*Net message to client' ela= 6 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571764493265
*** 2012-06-13 03:16:14.496
WAIT #11: nam='SQL*Net message from client' ela= 10003326 driver id=1952673792 #bytes=1 p3=0 obj#=34562 tim=1339571774496705
BINDS #10:
Bind#0
oacdty=01 mxl=32(21) mxlc=00 mal=00 scl=00 pre=00
oacflg=00 fl2=1000001 frm=01 csi=871 siz=2064 off=0
kxsbbbfp=2b8ec799df38 bln=32 avl=03 flg=05
value="535"
Bind#1
oacdty=01 mxl=32(21) mxlc=00 mal=00 scl=00 pre=00
oacflg=00 fl2=1000001 frm=01 csi=871 siz=0 off=32
kxsbbbfp=2b8ec799df58 bln=32 avl=04 flg=01
value="1003"
SQL> show parameter trace
NAME TYPE VALUE
tracefiles_public boolean TRUE
log_archive_trace integer 0
sec_protocol_error_trace_action string TRACE
sql_trace boolean FALSE
trace_enabled boolean TRUE
tracefile_identifier string
Profile options like "FND:Debug Log Enabled" and "Utilities:SQL Trace" are set to No
Can some one help me to stop these trace generation.
is there any way to find the cause for these trace?
Thanks in adv...

Hi;
Please check who enable trace. Please see:
How to audit users who enabled traces?
check concurrent programs first
*from the screen
*F11, then select the trace, then Ctrl+F11
Concurrent > program > define
open the form, press F11 (query mode), select the trace, then (ctrl + f11) this should return all concurrent programs which have trace enabled
Regard
Helios

Thumbnails of PDF-Files are no longer available ...

Hi,
Unfortunately, the thumbnails of the uploaded PDF files are no longer available ...
Any hints ???
Kind Regards
Holger

Holger, thanks for the screenshot confirming what you are seeing.
Please click on the broken thumbnail and copy the file link from the browser location bar. Will be something like https://creative.adobe.com/file/40869742-fa53-4dcd-b29c-6962ede2b013.
No one will be able to view the links (including me) but the the asset ID ("40869742-fa53-4dcd-b29c-6962ede2b013") will allow for further investigation. You can also email them to me at [email protected]
As a workaround you should be able to download and re-upload the files and have the thumbnails show.

OWB 10g: how control files are generated?

We are using OWB 10g within a 10g Database. We want to know how control files are generated by OWB in the file system. The reason we need to know is because our DBAs do not want to create directory objects pointing to NAS devices, their policy states that all directory objects should be on SAN shares. We rather use NAS shares since it simplifies our batch (too long to explain here). OWB has the "CREATE ANY DIRECTORY" privilege granted. Is it using this privilege to create a directory object for the path we specify the control file in the mapping or is it writing directly to this path? We checked the directory objects created (SELECT * FROM DBA_DIRECTORIES) after deploying a control file and it didn't seem to have created any new ones. Anyone knows how OWB creates these control files?

Yes, indeed that's what we were after. We basically wanted to be sure we are not breaking an internal policy that says that "Oracle directory objects can not be located on NAS shares". The reasoning behind this policy is that NAS shares are not deemed highly available or high I/O devices hence our Oracle DBAs will not allow us to create any Oracle directory objects in NAS shares. The policy states that all database data should be stored in SAN shares which are directly attached to the servers and are therefore high I/O devices. It is arguable if the OWB data we want to load is really part of a database, we believe it is not. There are other implications in our environment about using NAS instead of SAN (NAS can run in active-active mode across different data centres, whereas SAN requires replication since it doesn't usually work well in an active-active mode across different data centres). So based on your answer we should be fine since OWB reads and writes directly to the files without using Oracle Directory Objects which supports our theory that these are not DB specific files and are only "OWB App" files which can then sit on a NAS without breaking the above stated policy.

We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again. this is the message its shows when i upload proper format. i do not whom i should ..........

We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.
We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.
We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.
We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.
We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.
We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.
We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.We're sorry, but this file is not a valid filetype. GIF, JPEG and PDF files are accepted. Please try again.

I got uploaded after many ways. Just logged in windows PC and opened Internet explorer and uploaded it worked.

Pdf files are generated at update

Similar Messages

Maybe you are looking for