PDF fillable form saved as reader extended version will not open in reader on ipad2

I have forms that I have created in livecycle and saved as reader extended versions.  We I try to open them from adobe.com in the adobe reader on my ipad2 I get the Please wait... screen the form never opens.  Any help?

Technically, they can be opened but we will only display the placeholder page asking you to "wait" =). The form content is not viewable or fillable.

Similar Messages

  • Photoshop CS6 Trial Version will not open on my Mac

    Photoshop CS6 Trial Version will not open on my MacBook Pro 10.6.8. Message: Photoshop CS6 will not open on this type of Mac. Dreamweaver opened without a problem. When I go into my Adobe Application Manager, it shows Photoshop and Dreamweaver as installed even though I had to unistall Photoshop. I was hoping to try the download again??
    Please help.

    Creative Suite Cleaner Tool
    Run it, try again.
    Mylenium

  • How do I send a PDF fillable form from Adobe Reader Acrobat?

    I just installed Adobe Reader in my iPad to send a fillable form but as I sent it out the form is received blank by the recipient.  How do I save the PDF fillable form and send it out with the filled out information.  I am able to save it in Acrobat but for some reason I send the form but the recipient receives it blank.  What can I do?  Thank you for your help.

    Your recipient needs to use Adobe Reader or Adobe Acrobat to reliably view a filled form. Chances are they are using a third-party, substandard PDF reader like Apple Preview. Adobe Reader is a free download; if necessary, you could provide them a link from the Adobe website.

  • How do I load a PDF fillable form from Adobe Reader XI to a websiteÉ

    I have Adobe XI and want to create a fillable form which can be loaded to a website and remain fillable.  Any suggestions  DO I need a different adobe?

    Perhaps you would be interested in Forms Central
    Quickly & Easily Create Online Forms and Surveys | Adobe FormsCentral

  • Latest version will not open CS5

    I was told by Adobe that you would be able to answer my question.  After some problems getting CC to open, the problem is finally fixed.  However, now I cannot open a RAW file in CS5 because I get the error message that the file is not supported by the installed version of Camera RAW, which is 8.5  How do I get it to work? I need to be able to use CS5 for the Pixel Bender plugin, which I have been unable to use since I bought the Macbook Pro. 

    CindyClicks wrote:
    What?!!  That is crazy.  So what you are saying is that if I did not get CC then I would no longer be able to edit my photos in Photoshop if I get a new camera?
    In a nutshell, yes for Raw files.
    However there are workarounds when you can convert Raw files to DNGs then edit the DNGs in CS5.
    Photoshop Help | Digital Negative (DNG)
    Why would Adobe say that you would be able to help me fix this problem if you can't?
    Well the fix is to convert to DNG then edit the DNG in CS5. No-one said it would be a convenient fix but it does work.

  • Crossgrade, universal version will NOT open on Macbook Pro

    I just got my crossgrade in the mail, and installed everything. I can open and use every studio app EXCEPT Final Cut Pro.
    I checked each app, and they all claim to be universal. Here is the funny part: when i click "open with rosetta" for FCP it opens perfectly (albiet very slowly)
    The other programs do not require rosetta as they seem to be running natively on my much vaunted intel chips.
    Anyone have any idea what gives here?

    Tried that, updating OSX etc. Nothing.
    However, console spits out this when I try to run it:
    dyld: Library not loaded: @executable_path/../Frameworks/AVCVideoServices.framework/Versions/A/AVCVideoSe rvices
    Referenced from: /Applications/Final Cut Pro HD.app/Contents/MacOS/Final Cut Pro
    Reason: no suitable image found. Did find:
    /Applications/Final Cut Pro HD.app/Contents/MacOS/../Frameworks/AVCVideoServices.framework/Versions/A/AVCVi deoServices: mach-o, but wrong architecture
    /Applications/Final Cut Pro HD.app/Contents/MacOS/../Frameworks/AVCVideoServices.framework/Versions/A/AVCVi deoServices: mach-o, but wrong architecture
    Apr 20 20:09:59 Macbook crashdump[328]: Final Cut Pro crashed
    Apr 20 20:09:59 Macbook crashdump[328]: crash report written to: /Users/iainrobinson/Library/Logs/CrashReporter/Final Cut Pro.crash.log
    The whole "wrong architecture" thing may be a clue..

  • InDesign trial version will not open

    I just downloaded the creative cloud and the trial version of InDesign. Everything seems to have gone fine with the download, however, when I try to open InDesign nothing happens whatsoever.
    I disabled my firewall, am using WIFI, running Windows 7 Professional.
    Anyone have suggestions?

    am using WIFI,
    Exactly. Don't!
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Mylenium

  • Downloaded newest version, will not open on my desktop

    last week I stopped being able to open up AOL using Mozilla. After getting assistance from ATT who provides my DSL, I downloaded Mozilla 5.0. It seemed to load w/o difficulty, but when I tried to get on AOL nothing worked

    http://www.tekrevue.com/tip/enable-dashboard-os-x-yosemite/

  • ITunes (any versions) will not open on Mac OSX 10.5.5

    It started a couple of weeks ago, that when i go to open iTunes, the icon bounces in the dashboard but then stops, if i click the icon then it says the application is not responding, I've looked at most other quires on here before posting this so i don't think the answer is here yet, but hopefully someone can help me.

    The mp3 file referenced in the feed works OK in a browser. Nothing obvious is evident in the code you post, but please post the actual URL of the feed rather than its contents - it's not possible to test any further without knowing that - and also the URL of your iTunes Store page (found by control-clicking on the podcast image and choosing 'Copy Link') (assuming you have had your podcast accepted in the Store and are not just subscribing manually in iTunes).

  • All my pdf documents have turned into firefox html documents and will not open correctly

    All my pdf documents have suddenly become firefox html docs & will not open unless I go into the folder, right click, 'open with', etc. I haven't changed any of my settings. I think firefox did an update yesterday, however, so I'm connecting it with that, possibly...

    Try this:
    # Right click your PDFs, click Properties
    # Go to the General tab
    # In the '''Opens with''' section, click the ''Change'' button
    # Select Adobe Reader (or Foxit Reader/Whatever PDF viewer you use)
    # Click Apply then OK.
    Does it work then?

  • How do I NOT allow a PDF Fillable form I've created to be saved?

    I just got XI Pro ... I've never had a pro version before.  A co-worker who has used pro for ages (but has an older version) showed me how to make it so that a PDF filled form could be saved by another user.  However, in the version I have it seems that the ability for another user to save a PDF filled form is automatic ... I can't figure out how to shut it off.
    Our PDF fillable forms will be on our website, but we DO NOT WANT a user to be able to save the filled or the blank form.  Looking for a PRINT-ONLY option once it's been filled out. 
    Anyone have any ideas??
    Thanks!

    This was recent;y discussed here: http://forums.adobe.com/message/5881211
    There was a major change made with Reader 11 that allows it to save filled-in forms, add all sorts of comments/markups, and some other things without the document needing to be Reader-enabled, unlike all previous versions. This is what you're noticing. So the best you can do is attempt to clear the fields when the document is saved and/or when it's opened.

  • Acrobat Pro XI - I can't seem to be able to edit font sizes in a PDF Fillable Form

    I have a PDF fillable Form which I wish to complete except for a few fields that need to be completed each time the form is submitted, and save it with those static fields completed and signed with an image of my signature.
    Sometimes the font seems to auto change it's size to fit in the field it is intended for, other times it is either too small to read or too large to fit in the box and be readable.  I've chosen the arrow tool and the menu choice Edit; Edit Text and Images, and they don't really seem to do anything.
    One part of the form has two fields for phone numbers (Business and Home) and the Business entry is always too tiny to read, while the Home field is OK. 
    Aside from that, there are also two boxes with drop down menus which say Select with an arrow next to them, and one of them for example has choices of Male and Female.  If I select one, later when the form is printed, the gender choice is overprinting on the word Select, making it hard to read.

    Thanks for explaining that.  I wish I had "Locked" all the fields before I started then, since I did get somehow get a couple of them rearranged by accident and it took some (not a lot) of work to get them back in the proper order.
    For the present file, which I am not adding captions to, how would I set the "read only' property?  I looked around in the Tools area and the only thing that looked possible that I found was Protection; Restrict Editing but I didn't go farther yet because it wanted me to set a password before proceeding.
    Is it possible to make individual fields "Read Only" rather than the whole document?
    As for the signatures, what I did is sign on a piece of paper, scan that into a JPG file, and then choose "Sign" from the top menu bar between the Tools and Comment choices:
    This allowed me to drag the image of my signature to the line on the form where I am supposed to sign it, and place it there.  Then when I save the form with that signature on it, if I open it again and go to Forms Edit, I get a message that the form contains no Form Fields, and asks it I want Acrobat to detect fields for me.  If I choose yes, it then detects fields that were not previously filled in, but not the fields in which I had placed default entries before saving it.
    I see where you mean about Signature on the left pane, but if I open that after loading a PDF that I signed using the above procedure, it detects no signature.  So the "Digital Signature" you mention must not be the image of the signature like I am using.  So if I want to  make the image of my signature into a "Digital Signature" that can be verified, do I have to go to some third party paid procedure like Verisign or EchoSign or something or can I somehow self certify the image of my signature?
    I notice, as a side issue, that if I upload the blank unmodified PDF Form to Acrobat.com, it lets me fill it out and saves the file with a "form" extension, and they have a menu choice to Sign, but if you choose that you just get a box in which it expects you to draw your signature with your finger or a stylus I guess, but the result doesn't look much like my signature, and then if you save it to the computer, it does save it as a PDF file, but if you try to print it, the printed document is blank, so that is kind of useless.
    Thanks for your continued help!

  • How do I disable security settings on PDF fillable form?

    The PDF fillable form was made in Word and saved as a PDF. I tried copying it then bringing into Acrobat Pro X to make it a fillable form. Saved with Enabled Features but when opened into Reader I get a security warning restricting adding text or placing a signature. I've tried changing setting and can't figure out what is wrong or even if it's possible it fix this.
    Does anyone know how to fix this?
    Kwiley

    It is "The security settings on this document prevent adding text and /or placing a signature on it from Adobe Reader. To fill and sign this document you need to print it out."  These forms need to be fillable because they change and then my client places her signature or her bosses signature on the page.  Is there another way to do this?
    Thanks,
    Kathy

  • I am unable to type in a text box on a PDF fillable form.

    I have previously had no problem typing in text boxes on PDF fillable forms in Firefox but now nothing appears when I try in to type the information in. I am not having this problem with the same PDF forms on either the Internet Explorer or Google Chrome browsers.

    Your system details list show shat you have two Adobe Reader plugins installed.
    # Adobe PDF Plug-In For Firefox and Netscape 10.1.1
    # Adobe PDF Plug-In For Firefox and Netscape "9.4.5"
    Uninstall them both and install the latest Adobe Reader version.
    * http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
    *https://support.mozilla.org/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    *http://kb.mozillazine.org/Adobe_Reader
    *http://get.adobe.com/reader/otherversions/

  • Is there Speech to Text Software Capabilities? .... for Adobe Acrobat PDF Fillable Forms - Mac

    Hi,
    I hope that someone can help me with this.....
    I create forms in InDesign and export to Adobe Acrobat PDF. I create a fillable version in Acrobat so my clients "field therapists" can fill the forms out utilizing their laptops and iPads when on location with client. The forms they fill out, most use the mac, and they are now requesting that the fillable PDF forms have the capability to render text when it is spoken. (Speech to Text) also if written with a stylus pen the want it to render the text in the fields (handwriting to text)
    I have researched and have found a company that has software that does this for mac, called dragon, but they said I need to test the software to see if it does what I need it to do with the acrobat pdf.
    Has anyone implemented this "speech to text" and "handwriting to text" in any of their Adobe Acrobat PDF fillable forms?
    If so, what did you find worked, or what did you find that did not work.
    All responses welcome, I am hopeful I can find software that will work with existing mac adobe acrobat fillable PDF forms so I dont have to change the manner in which I am creating my forms for this client.
    P.S. FYI, I am not looking for responses that are a response for 508 Compliant forms which is speaking the text, this I do for clients and this I know how to do, it is quite different from "Speech to Text"
    Thanks in advance for all responses.
    Message was edited by: muralsbyamy

    There really is nothing Adobe can do about how non-Adobe software functions. The PDF standard is no longer controlled by Adobe, it's controlled by ISO. Some PDF viewers choose to have no support for forms, some have pretty good support, and some (like Preview) are simply malevolent. There is a lot of non-Adobe software that creates bad PDFs, and a lot that doesn't have nearly the support of Acrobat/Reader. Again, this isn't a problem Adobe can solve.
    Regarding, allowing image formats with the buttonImportIcon method and Reader, I know a feature request has been submitted for this. Reader 11 is the first version since Reader 5 that supports this, so I have hope for the future. In the mean time, it's fairly easy nowadays to convert an image to PDF. Even Preview can do it.

Maybe you are looking for