PDF form output

Apparently you can make a PDF form output. But how did they do this:
http://www.oracle.com/technology/products/reports/showcase/conmeds_OC_onePage.pdf
Is it possible to make it in such a way that you can save the document including the entered data? If you try to do that now you get an Adobe Reader error.

What I'd really like is to download directly to WORD from sapscript or smartform with logos, boxes intact just like they appear in PDF. 
PDF Writer is a possibility, but do you think we could posibly achieve this with standard SAP Function modules:
MS_WORD_OLE_FORMLETTER_PICTURE MS_WORD_OLE_FORMLETTER        
If by using this FMs we wouldnt be using the sapscript and smartform technology by pretty much generating these documents over and over again, please confirm...
Danke!
Francisco

Similar Messages

  • How to create a multiple PDF-form outputs into one PDF?

    Hi,
    I`d like to create a PDF document with a few pages in it, build from different PDF-forms using many form-function calls. Where each PDF-form can use its own interface.
    I`ve made a simple programme, but as the result I have a few separated documents with scrolling tab instead of one document with all pages in it.
    What am I doing wrong?
    *& Report  ZZ_TEST_PDF_MULTY
    REPORT  zz_test_pdf_multy.
    PARAMETERS:
      p_page TYPE i DEFAULT 2,
      p_row TYPE i DEFAULT 4.
    END-OF-SELECTION.
      DATA:
        tb_itf TYPE tsftext,
        s_itf TYPE tline.
      DATA:
        c_fmname TYPE rs38l_fnam,
        s_outputparams TYPE sfpoutputparams,
        s_docparams TYPE sfpdocparams,
        s_formoutput TYPE fpformoutput,
        s_sfpjoboutput TYPE sfpjoboutput,
        c_page TYPE string,
        c_row TYPE string.
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'FP_TEST_00'
        IMPORTING
          e_funcname = c_fmname.
      s_outputparams-nodialog = 'X'.
      s_outputparams-device   = 'PRINTER'.
      s_outputparams-preview  = 'X'.
      s_outputparams-dest     = 'PDF'.
      s_outputparams-getpdf   = ' '.
      s_outputparams-title    = sy-title.
    *  s_outputparams-bumode   = 'M'.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = s_outputparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          OTHERS          = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      s_docparams-langu   = 'R'.
      s_docparams-country = 'RU'.
      DO p_page TIMES.
        MOVE sy-index TO c_page.
        REFRESH tb_itf.
        DO p_row TIMES.
          MOVE sy-index TO c_row.
          c_row = sy-index.
          CONCATENATE
              'page' c_page 'row' c_row
            INTO s_itf-tdline SEPARATED BY space.
          APPEND s_itf TO tb_itf.
        ENDDO.
        CALL FUNCTION c_fmname
          EXPORTING
            /1bcdwb/docparams  = s_docparams
            textlines          = tb_itf
          IMPORTING
            /1bcdwb/formoutput = s_formoutput
          EXCEPTIONS
            usage_error        = 1
            system_error       = 2
            internal_error     = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDDO.
      CALL FUNCTION 'FP_JOB_CLOSE'
        IMPORTING
          e_result       = s_sfpjoboutput
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.

    Sorry, but making single PDF from many smartforms is not what I want to achieve. I wold like to know how to get one PDF document made by ALC-forms.
    In my example I have many PDF documents. So, how to get (or put) them all in one PDF?
    ps: the way to get one PDF from smartforms is also here:
    "Combining Multiple Smartform Outputs Into One PDF file"
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450

  • Displaying a PDF form output in another Static PDF form

    Hi ,,
    I  have developed a PDF form in Web Dynpro. The form is Working fine.
    Now i want that after pressing the button "Submit" it should Navigate to the Next View(Display) and Displays the Output in PDF form(Static).
    Is it possible to do this??
    In short is it possible to have two views containing PDF forms in the same application and is navigation possible between them?
    Regards
    Pranay

    hi,
    Create the data source for both views and map Interactiveform UI element
    And you can give the plugs in as usual.
    thanks,
    Lohi.

  • Sending Data to PDF Forms from ABAP Program.

    Hi Experts,
    I left ABAP Programing for a while around 1+ years Due to some personal problems
    Now I have struck up with new issue. Its ADOBE PDF forms.
    I am Entirely new to this topic & knows about Nothing.
    My requirement is to display a report in PDF form. Its totally Independent form from NACE.
    I have written a Driver program & retrieved all the DATA into a Final internal table.
    Now All that I need is to display the same Internal Table data into PDF form output.
    Can anyone help me how to send this data(47 records in Internal table with 8 fields in Internal table) to PDF.
    Please help me out Experts with any suggestions.
    Thanks & Regards,
    Dileep .C

    Hi,
    if u pass your internal table to smartform we can achieve . because we can convert smartform output into pdf easily.
    Regards,
    karthikeyan k s,
    Edited by: karthikeyanks on Nov 19, 2010 12:58 PM

  • Problems with EC Sales List in PDF-Form

    Hi,
    i have a Problem with the EC Sales List (RFASLM00).
    When i use it with SAP script Form Output (F_ASL_DE) i will be asked
    for a Printer and it works. I get an Spool-No.
    When i use it with PDF Form Output (F_ASL_DE) i will be asked for a Printer
    (i don't use LOCAL). When finished  i get the message:
    Spool number 0000000000 LIST2S - EC sales list for 0888.
    No spool is create and i don't know where i can find the output. 
    Hope anyone can help.
    Regards, Dieter

    no need to take output of PDF.
    do one thing
    run report and generate spool for LOCL
    then
    <b>RSTXPDFT4</b> run this report with that spool number then u will get output in PDF format.
    Regards
    Prabhu

  • To convert Smart Form output to PDF format and send it via email.

    Hi Friends,
    Could any one please tell me, how to convert the Smart Forms output to PDF format and send it via email to customer. If any one have the code, kindly mail me to [email protected]
    Thanks & Regards,
    John

    Refer the links -
    how to convert smartform into pdf and send through mail
    Smartform as PDF attachment to a mail.
    smartform pdf and mail
    smartform to pdf to mail
    Regrads,
    Amit
    Reward all helpful replies.

  • Error in opening the PDF file created from the smart form output.

    Hi All,
    i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
    Customer 0001000000 with name Ravi called 5 times today.
    I have to send this output to mail as an attachment.
    for this i am coding as below.
    ******Call the SSF Function module
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = Form name
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    fm_name = lv_fmname
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3
    lv_partner_number = '0001000000'.
    lv_name_org1 = 'Ravi'.
    lv_z_no_calls_day = '5'.
    lw_ctrlop-getotf = 'X'.
    lw_ctrlop-no_dialog = 'X'.
    lw_compop-tdnoprev = 'X'.
    lw_compop-tddest = 'LP01'.
    *******Call the Form Function module and get the OTF of form output
    CALL FUNCTION lv_fmname
    EXPORTING
    name_org1 = lv_name_org1
    partner_number = lv_partner_number
    z_no_calls_day = lv_z_no_calls_day
    control_parameters = lw_ctrlop
    output_options = lw_compop
    user_settings = ' '
    IMPORTING
    job_output_info = w_return
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5.
    i_otf] = w_return-otfdata[.
    *********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
    the output is in the format
    TDPRINTCOM(2) TDPRINTPAR(70)
    ST XXXX.. customer 0001000000 with
    name.....
    i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
    ***********To convert to PDF Format
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    format = 'PDF'
    max_linewidth = 132
    IMPORTING
    bin_filesize = lv_len_in
    BIN_FILE =
    TABLES
    otf = i_otf
    lines = i_tline
    EXCEPTIONS
    err_max_linewidth = 1
    err_format = 2
    err_conv_not_possible = 3
    err_bad_otf = 4
    OTHERS = 5
    *********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
    i_objtxt = 'test with pdf-Attachment!'.
    APPEND i_objtxt.
    DESCRIBE TABLE i_objtxt LINES v_lines_txt.
    READ TABLE i_objtxt INDEX v_lines_txt.
    wa_doc_chng-obj_name = 'Smart Form'.
    wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
    wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
    *********Creating the Entry for the document
    CLEAR i_objpack-transf_bin.
    i_objpack-head_start = 1.
    i_objpack-head_num = 0.
    i_objpack-body_start = 1.
    i_objpack-body_num = v_lines_txt.
    i_objpack-doc_type = 'RAW'.
    APPEND i_objpack.
    i_objbin] = i_tline[.
    DESCRIBE TABLE i_objbin LINES v_lines_bin.
    READ TABLE i_objbin INDEX v_lines_bin.
    i_objhead = 'Frequentcaller list_Day.pdf'.
    APPEND i_objhead.
    ************Creating the entry for the attachment.
    CLEAR : i_objpack.
    i_objpack-transf_bin = 'X'.
    i_objpack-head_start = 1.
    i_objpack-head_num = 1.
    i_objpack-body_start = 1.
    i_objpack-body_num = v_lines_bin.
    i_objpack-doc_type = 'PDF'.
    i_objpack-obj_name = 'ATTACHMENT'.
    i_objpack-obj_descr = 'FCA'.
    i_objpack-doc_size = v_lines_bin * 255 .
    APPEND i_objpack.
    CLEAR i_reclist.
    i_reclist-receiver = 'mail id'.
    i_reclist-rec_type = 'U'.
    APPEND i_reclist.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = wa_doc_chng
    put_in_outbox = 'X'
    commit_work = 'X'
    TABLES
    packing_list = i_objpack
    object_header = i_objhead
    contents_bin = i_objbin
    contents_txt = i_objtxt
    receivers = i_reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    operation_no_authorization = 4
    OTHERS = 99.
    This is all i am doing.
    It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
    I serched in the forum but i couldn't get the answer.
    I suspect there is a problem in getting the OTF data..
    Please help me in resolving this issue....
    Thanks in advance.
    RK

    Check the sample , and see where you made the mistake.
    REPORT ZPDF_MAIl.
    DATA:
      w_fm_name      TYPE rs38l_fnam,
      w_bin_filesize TYPE i,
      w_filesize     TYPE i,
      w_lines_txt    TYPE i,
      w_lines_bin    TYPE i.
    DATA:
      wa_ctrlop   TYPE ssfctrlop,
      wa_outopt   TYPE ssfcompop,
      wa_objhead  TYPE soli_tab,
      wa_buffer   TYPE string,
      wa_doc_chng TYPE sodocchgi1.
    DATA:
      BEGIN OF t_mail_ids OCCURS 0,
        mailid TYPE ad_smtpadr,
      END OF t_mail_ids,
      t_otfdata TYPE ssfcrescl,
      t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
      t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = 'Z195_TEST'
      IMPORTING
        fm_name            = w_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    IF sy-subrc EQ 0.
    ENDIF.                               " IF sy-subrc EQ 0.
    wa_ctrlop-getotf = 'X'.
    wa_ctrlop-no_dialog = 'X'.
    wa_outopt-tdnoprev = 'X'.
    CALL FUNCTION w_fm_name
      EXPORTING
        control_parameters = wa_ctrlop
        output_options     = wa_outopt
        user_settings      = 'X'
      IMPORTING
        job_output_info    = t_otfdata
      EXCEPTIONS
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        OTHERS             = 5.
    IF sy-subrc EQ 0.
    ENDIF.                               " IF sy-subrc EQ 0.
    t_otf[] = t_otfdata-otfdata[].
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
        max_linewidth         = 132
      IMPORTING
        bin_filesize          = w_bin_filesize
      TABLES
        otf                   = t_otf
        lines                 = t_pdf_tab
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        err_bad_otf           = 4
        OTHERS                = 5.
    IF sy-subrc EQ 0.
    ENDIF.                               " IF sy-subrc EQ 0.
    LOOP AT t_pdf_tab.
      TRANSLATE t_pdf_tab USING '~'.
      CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
    ENDLOOP.
    TRANSLATE wa_buffer USING '~'.
    DO.
      t_record = wa_buffer.
      APPEND t_record.
      SHIFT wa_buffer LEFT BY 255 PLACES.
      IF wa_buffer IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
    t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
    APPEND t_objtxt.
    t_objtxt = ' Check the Attached PDF file for COR'.
    APPEND t_objtxt.
    DESCRIBE TABLE t_objtxt LINES w_lines_txt.
    READ TABLE t_objtxt INDEX w_lines_txt.
    READ TABLE t_objtxt INDEX w_lines_txt.
    wa_doc_chng-obj_name = 'COR Display'.
    wa_doc_chng-expiry_dat = sy-datum + 10.
    CONCATENATE 'COR' "w_cornr
                '-' "w_stat_descr w_action_desc
           INTO wa_doc_chng-obj_descr SEPARATED BY space.
    wa_doc_chng-sensitivty = 'F'.
    wa_doc_chng-doc_size =  w_lines_txt  * 255.
    CLEAR t_objpack-transf_bin.
    t_objpack-head_start = 1.
    t_objpack-head_num = 0.
    t_objpack-body_start = 1.
    t_objpack-body_num = w_lines_txt.
    t_objpack-doc_type = 'RAW'.
    APPEND t_objpack.
    t_objpack-transf_bin = 'X'.
    t_objpack-head_start = 1.
    t_objpack-head_start = 1.
    t_objpack-head_num = 0.
    t_objpack-body_start = 1.
    DESCRIBE TABLE t_objbin LINES w_lines_bin.
    READ TABLE t_objbin INDEX w_lines_bin.
    t_objpack-doc_size = w_lines_bin * 255 .
    t_objpack-body_num = w_lines_bin.
    t_objpack-doc_type = 'PDF'.
    t_objpack-obj_name = 'COR'.
    t_objpack-obj_descr = 'COR Test'.
    * concatenate 'COR' w_cornr into t_objpack-obj_descr
    *                           separated by space.
    APPEND t_objpack.
    *LOOP AT t_mail_ids.
      CLEAR t_reclist.
      t_reclist-receiver = 'INTENATEMAIL'.
      t_reclist-rec_type = 'U'.
      APPEND t_reclist.
    *ENDLOOP.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = wa_doc_chng
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = t_objpack
        object_header              = wa_objhead
        contents_bin               = t_objbin
        contents_txt               = t_objtxt
        receivers                  = t_reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    IF sy-subrc EQ 0.
    ENDIF.

  • How to get the output of a standard report  RFBILA00 in PDF form.

    hi,
    I have to get the output of the standard report RFBILA00 in the PDF form.
    Thanks.

    Hi Rao,
    you can run your report RFBILA00 in background  and in background  job you can add one more step, next in that step you can add custom  report like zsubmit .
    job should be set like
    step1:  RFBILA00 with variant.
    Step2:  zsubmit report with variant.
    In Zsubmit report  you can  read, your first step spool using FM GET_JOB_RUNTIME_INFO
    and pass that spool  in the FM  CONVERT_ABAPSPOOLJOB_2_PDF.
    when second  report run in job  you can set your target like download in the server or  send email etc.
    Regards,
    Prasenjit

  • 1)form to capture data 2) massage data/output 3) import data from Step 2 to PDF FORM 4) save for download

    I have a project that entails tax forms from the IRS  -- I know everyone's favorite stuff.
    1)I need to setup a form that asks the webusers questions regarding their personal tax information -
    2) then validate/massage that data/information and determine what PDF form template to output this data to. (possibly output to 4 forms determined by users response)
    3) output the data collected in step 1 to the correct PDF template/form example template= http://www.irs.gov/pub/irs-pdf/f1040.pdf  - applying the data to the correct fields - bascially filling out the users name, address, calculations etc.
    4)allow the user to save/print/download the produced form in step 3
    I know I am not the first person to need this functionality. Can you please simply answer my question - can this be done?  Does it require software from other companies, or is this something that can be accomplished with just adobe products?  If so, can you point me to some tutorials that show me the necessary process to do this?
    I very much appreciate any support you can provide me - I need to start on this project yesterday.
    Thanks in advance for your time.

    In your PHP code, change this -
    $editFormAction = $_SERVER['PHP_SELF'];
    to this -
    ?>
    <?php
    if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "registreren")) {
    // add your captcha verification code here ....
    // captcha most likely ends with a header command to relocate failed attempts, so make sure you add
    // an exit() command after that header.  Otherwise, allow the successful captcha to fall into the following
    // block of code.
    // don't ignore that closing brace
    ?>
    <?php
    $editFormAction = $_SERVER['PHP_SELF'];

  • Can the individual form response be sent via e-mail to us in the PDF form format (not the raw output we see currently when using e-mail notifcation) each time a user submits a reponse?

    Hi, we basically have an on-line job application that we need to be sent to us via e-mail notification every time a user submits a response, not with the raw data output from the form fields like the current e-mail notification setting allows, but as an actual PDF attachment that mirrors the format of the on-line form, with the user response data in it. We need this to be automated and sent to a central HR e-mail to distro to others. It would be essentially the same thing as a user downloading a PDF form, filling it out, then e-mailing it back to us, but using the submit options via the Form Central server instead. Is this even possible and, if so, is there any documentation on it? I have not found anything clear in searching for this same topic.

    No this is not possible within Formscentral. You could export a PDF without a submit button (an option when saving your form as PDF) and then in Acrobat add a submit button to your form and have it automatically sent to the email of your choice. This kind of workflow falls outside the scope of Formscentral.
    Andrew

  • Merging Smartform Output and Adobe Form Output in a single PDF File

    Hi All,
    My Requirement is as follows -
    I have multiple Smartforms and a single Adobe Form.
    I want to merge the Smartform Outputs and Adobe Form output in a single PDF.
    I am able to merge multiple Smartform Output in a PDF , but not able to find any way to merge smartform and adobe form output as the Smartform output is in OTF Format and Adobe form output is in PDF Format itself.
    I have tried few ways , but could not find any success.
    Request you all to give me some direction to this problem.
    Thanks & Regards
    Bhavika

    Kumar,
    I am afraid this is not possible using SAP functionality. There are probably 3rd party tools which allow you to merge several PDFs into one, but SAP itself does not offer such a mechanism. There is an internal SAP function, though, which can merge several "parts" (=several PDFs) within an Adobe-created spool request into a single PDF, intended for downloading this PDF from SP01.
    This is described in note 1717357.
    Best regards,
    Alexander

  • Sandard Smart Form output into PDF format.

    Hi to all,
    Any one please guide me, how  to convert  sandard Smart Form output into PDF format.
    Regards,
    Thanesh

    hi thanesh,
    the below code may help you.
    data: FM_NAME TYPE RS38L_FNAM.
    DATA:       W_BIN_FILESIZE TYPE I,
          T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
          T_PDF_TAB TYPE TLINE OCCURS 0 WITH HEADER LINE,
          W_FILESIZE TYPE I,
          WA_CTRLOP TYPE SSFCTRLOP,
          WA_OUTOPT TYPE SSFCOMPOP,
          T_OTFDATA TYPE SSFCRESCL.
    call function 'SSF_FUNCTION_MODULE_NAME'
      exporting
        formname                 = <ur form name>
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
    IMPORTING
       FM_NAME                  = FM_NAME
    EXCEPTIONS
       NO_FORM                  = 1
       NO_FUNCTION_MODULE       = 2
       OTHERS                   = 3
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    WA_CTRLOP-GETOTF = 'X'.
    WA_CTRLOP-NO_DIALOG = 'X'.
    WA_OUTOPT-TDNOPREV = 'X'.
    call function <function module generated for ur form>
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
       CONTROL_PARAMETERS         = WA_CTRLOP
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
       OUTPUT_OPTIONS             = WA_OUTOPT
       USER_SETTINGS              = 'X'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
       JOB_OUTPUT_INFO            = T_OTFDATA
      JOB_OUTPUT_OPTIONS         =
    EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    T_OTF[] = T_OTFDATA-OTFDATA[].
    call function 'CONVERT_OTF'
    EXPORTING
       FORMAT                      = 'PDF'
       MAX_LINEWIDTH               = 132
      ARCHIVE_INDEX               = ' '
      COPYNUMBER                  = 0
    IMPORTING
       BIN_FILESIZE                = W_BIN_FILESIZE
      BIN_FILE                    =
      tables
       OTF                         = T_OTF
        LINES                       = T_PDF_TAB
    EXCEPTIONS
       ERR_MAX_LINEWIDTH           = 1
       ERR_FORMAT                  = 2
       ERR_CONV_NOT_POSSIBLE       = 3
       ERR_BAD_OTF                 = 4
       OTHERS                      = 5
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function 'WS_DOWNLOAD'
    EXPORTING
       BIN_FILESIZE                  = W_BIN_FILESIZE
      CODEPAGE                      = ' '
       FILENAME                      = 'D:\TEST11.PDF'
       FILETYPE                      = 'BIN'
      MODE                          = ' '
      WK1_N_FORMAT                  = ' '
      WK1_N_SIZE                    = ' '
      WK1_T_FORMAT                  = ' '
      WK1_T_SIZE                    = ' '
      COL_SELECT                    = ' '
      COL_SELECTMASK                = ' '
      NO_AUTH_CHECK                 = ' '
    IMPORTING
       FILELENGTH                    = W_FILESIZE
      tables
        data_tab                      = T_PDF_TAB
      FIELDNAMES                    =
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_WRITE_ERROR              = 2
       INVALID_FILESIZE              = 3
       INVALID_TYPE                  = 4
       NO_BATCH                      = 5
       UNKNOWN_ERROR                 = 6
       INVALID_TABLE_WIDTH           = 7
       GUI_REFUSE_FILETRANSFER       = 8
       CUSTOMER_ERROR                = 9
       NO_AUTHORITY                  = 10
       OTHERS                        = 11
    if sy-subrc = 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    WRITE: / 'SUCCESSFULLY CONVERTED'.
    endif.

  • How to configure a interactive pdf form to an output type

    Hi all,
       The user has to open the form, do some manual entry in the form and finally print it. For this I have created a Webdynpro application with the adobe pdf form linked to it. It can be teted by testing the webdynpro application. But can it be linked to some output type, so that when the output type is triggered, the form is opened and user can do some corrections and print it. Please help me in this regard.
    Thanks
    Thivya

    Hello. I dont understand why would you do such a thing.
    First option is to link it. so if a user e.g. changes the order, he will get the form preview which he can fill and then print as you wanted. All this in ERP and print preview for the form in adobe reader.
    Or you can create a WD app, which must be manually opened, form created, form changed and printed.
    I hope it helps or you can try to clarify if i don´t understand your problem.

  • Examples for converting multiple form output to single pdf

    Hi all ,
         I need sample code or examples for converting multiple smart form outputs (more than 1)  to single pdf. Can someone provide that? Reply  ASAP 
    Thanks & Regards,
    Pavan.

    Hi,
    check this:
    [How to merge multiple spools into single PDF file?;
    [Merge multiple PDF Files;
    [https://www.sdn.sap.com/irj/scn/advancedsearch?query=multipleformoutputtosinglepdf++]
    hope u'll get some idea.
    Regards,
    Sneha.

  • How to output PDF file through XI from PDF form generated in SAP

    Hi, All,
    I need to generate and send out PDF file to other system through XI. The PDF file source come from SAP PDF form which type is XSTRING. I see there is a similar thread posted here /message/527877#527877 [original link is broken]
    but it seems does not have good solution there. Can anybody give a hand?
    Useful information will be surely awarded.
    Yang

    Hi,
    Please check the links below to know about conversion agent tool,it is a third party tool which helps to convert the PDF,word doc,HL7 doc......etc into xml format.
    This s/w u have to buy from SAP and do the convertion in the convertion agent tool and deploy it in the xi server.
    Check the links
    http://help.sap.com/saphelp_nw04/helpdata/en/43/6d95e0ac846fcbe10000000a1553f6/CMGetStart.pdf
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/content.htm
    More on the SAP Conversion Agent by Itemfield
    Integrate SAP Conversion Agent by Itemfield with SAP XI
    Conversion Agent a Free Lunch?
    How to get started using Conversion Agent from Itemfield
    Conversion Agent - Handling EDI termination characters
    https://websmp102.sap-ag.de/~sapdownload/011000358700001090982006E/ConvAgentDocSP16.zip
    https://websmp102.sap-ag.de/~sapdownload/011000358700004921152005E/ConversionAgent.pdf
    Regards,
    Phani

Maybe you are looking for