PDF Form Printing Text, but no Form

I have an accountant trying to print a PDF Form. It cannot be saved, but only printed. When the form is completed and printed, it only prints out the entered text, and nothing else. All other PDF docs print fine
IT conditions:
She prints to an older Panasonic Copy machine
Her printer connection is Shared
Another PC can print the same form 100% fine and that machine goes through here PC to the printer.
Completed Troubleshooting:
First discovered she was on Reader 10.1.3 and the other PC was 10.1.1
Did a complete uninstall of 10.1.3 to include deleting from registry
Installed 10.1.1 with same issue.
Verified all a printer and reader settings are the same for both PCs
Attempted work arounds:
Installed doPDF virtual printer to try and save the completed form as PDF
PDF prints text and form text, but not the field borders for each block
Installed Nitro PDF as default PDF reader, same issue. Will not print out the field borders.
Additional Troubleshooting:
Ran full virus and malware/spyware scans with no issues.
Specific Form:
https://forms.in.gov/Download.aspx?id=4722
Searched all over the internet with Google and have had no luck finding any suggestions

When you print it, the box that pops up should say, under the Comments and Forms box, "document and markups". Hope that helps.

Similar Messages

Firefox 5 with Fedora 15 prints text, but will not print images from web pages.

I have a Pentium 3 laptop running Fedora 15 and using Firefox 5.0. Firefox will print the text from a website, but will not print the images. It just leaves the spaces blank where the images should be. Print preview shows the same results. I have a AMD desktop and a Pentium 4 laptop running the same software, except that the desktop is running the 64-bit version of Fedora 15 and the second laptop is running the 32-bit version. The desktop prints the text and images without very many problems, but both laptops will print the text, but ''not'' the images.
As a test, I downgraded Firefox from version 5.0 to 4.0.1 on the Pentium 4 laptop and encountered the same problem. So, since I do not print much from either laptop, I had not before seen this problem. The desktop has never seen it.
I figure it may be an about:config problem, but I do not know what the parameter may be that is causing the problem.

See this: 
http://kb.mozillazine.org/Problems_printing_web_pages

Print Web report and don't print text but print frames

Hello , I am running a report by web browser, everything is ok and I can see that, now I want to print it so I put DESTYPE = printer and DESNAME =\\machine\printer then, when I print the report there is no mistakes but I dont know why I get a page without any character .. The frames print ok! all print ok but not the text, I test using diferent colors for the text but nothing .. could you help me please? this is really strange :( there is no message of error.

Also I for got .. This is the configuration :
Oracle IAS Release 1
Oracle8i Enterprise Edition Release 8.1.7.2.0 - 64bit Production
Windows 2000 Server
Report Builder 6.0.8.11.3
The printer is HP LaserJet 8000 Series PS
8000 Series PS-172.20.6.100
I have a very simple report that works fine
for example if I put this link:
http://pelma1w2dws03/dev60cgi/rwcgi60.exe?hidden_run_parameters=np_sr_lov_choose_showrooms&destype=cache
I can see my report in web without any trouble
but when I try to print:
http://pelma1w2dws03/dev60cgi/rwcgi60.exe?
hidden_run_parameters=np_sr_lov_choose_showrooms&destype=printer&desname=\\PELMA1W2PCS04\PELMA1PIT0601
then I received a message of print succesfully but when I see the print
there is no text, it print images, frames, and there is an space where I expect the text but there is no text and no messages of error.

My printer will not print text but the paper will go through real fast

my printer hp deskjet845c will not print text document but will go through the printer with no text on it

Hey there @d888-777!
Thank you for posting on the HP Forums!
I should be able to provide some suggestions that may resolve the issue regarding text document not printing. Do you get this issue when printing all text document or from specific programs?
I suggest running a cartridge cleaning from the HP Toolbox. If the clean cartridge document prints with text, then you may be looking at a slight software issue. To run a print cartridge cleaning I suggest following this link regarding Cleaning the Inkjet print cartridges. In the document scroll down to cleaning the Inkjet print cartridges and follow the steps.
The printer does not have full feature software for Windows 7 operating system. The printer will need to use the basic in-OS print driver. I suggest removing the printer from the devices and printer menu and re-adding the printer.
To remove the printer from devices and printers:
Press the Start button.
Press devices and printers on the right column.
Select the printer and click remove device.
Unplug the USB cable.
Restart the computer.
To add the printer back:
Wait for the computer to restart.
plug in the USB cable.
Windows 7 should locate the basic print drivers and install the printer.
You may not have all the functions available for the printer with the basic drivers.
Pease post back and let me know how everything goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Hp c4580 isn't printing text but can print pictures on vista pc. how do we fix it?

vista PC prints pictures and graphics fine, but we can't get it to print text off of a word document. windows test oage only printed the windows graphic in the upper left corner and "Windows Printer Test Page" but nothing else.

It appears your black cartridge is not working. Try the troubleshooting steps in this page, which will likely lead to either an empty black cartridge or this troubleshooting page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Replacing pages text but preserving «form» pages... A real problem of (wasting) energy and time?

Section A: a bunch of pages with text that are having a lot of changes.
Section B: a bunch of pages with forms already approved.
(Of section B have a already a PDF file with fields, buttons, links, etc, absolutely perfect)
Problem: change in section A a lot of pages.
Two ways: one, is replacig in the new PDF —now with many changes in section A — just the PDF section B pages already right.
In this procedure pages are indeed changed but field are lost...; the second way (I am using against any logic as time and energy are related) is copy-paste all the fields and buttons from the «good» PDF of section B to the new PDF with changes already made in section A.
What's wrong?
Why the file gets sick and does not allow to do this?
Going back to export as IDML is not enough.
Inserting the perfect pages of section B in the new PDF (either removing before or later the inadequate pages) damages the TOC in the new PDF and the hyperlinks related no page numbering get dead.
And inserting/replacing new section A in the old section B claims again for a loss of links as the PDF file has been made up of two parts. (?)

No, is not at all a problem related to maintaining forms.
All the contrary.
Please be kind and read again the post, is a problem with links, with the integrity of the file, with anomalies in behavior, just with many things far beyond the user that can not be reduced to that known resource:
http://indesignsecrets.com/designing-forms-with-indesign-acrobats-replace-pages-feature-is -at-your-service.php

Images turn greyscale when saving Postscript/PDF or Print Preview but text remains in colour?

It is in colour, until I turn on Overprint preview, or try to save the booklet as a Postscript or PDF file.
In print preview or when doing any of the above things, it goes to greyscale but the text and rectangles remain in colour?
The images have been placed from Photoshop as eps files and were duatone in PS.
Please help.

As both the engineering resource at Adobe most involved with end-to-end PDF print publishing workflows and having served at Cal Poly San Luis Obispo last year as an Industry Research Professor teaching students about modern, reliable workflows as well as variable data publishing with PDF, I find this thread fascinating.
Obviously, you can force fit PostScript for output, albeit very inconveniently and with the possibility of problems and artifacts due to the device-dependent nature of PostScript (along with flattened transparency, lack of ICC color management, and inconsistencies in spot color handling).
However, unless the university assignment was specifically to demonstrate to you how difficult and problematic PostScript-based workflows were over a dozen years ago, I am absolutely appalled that any accredited university or professional school program in design / graphic arts / publishing / printing would have you use PostScript workflows in any way.
Other than hacking around with the possibility of doing output that varies based on external variables as the job is being RIPed, I know of absolutely no advantages of PostScript over PDF in this arena and obviously a boatload of disadvantages.
As I have written many times in the past, I wouldn't advocate that publishers with extensive collections of EPS-based content do wholesale conversions of same, but for new content or when content needs revision, PDF is definitely the replacement for EPS or PostScript in any flavor.
- Dov

Fillable Forms and Distribution : Flatten Author's text but not Form Fields

Ok folks, first time posting on this forum though definitely not my first time searching for answers! I've been pretty successful with other questions though I think I've stumped myself on this one.
I've created a "generic" Fillable Form that I will be using to distribute to various contacts for certain upcoming projects that we will be participating in. Because each project will be different, instead of having to create a new form each time, I am hoping that with my base model form I can input various information with the type writer tool and somehow protect this information from being edited/deleted while still allowing my contacts to input their information within the form fields.
I've tried applying different variations of the security features, but the drawback of doing this is that it will not allow me to "distribute" my form so that it can be track with Adobe Tracker. The only way I can succefully distribute this form to the masses and track responses is if all security settings for the document are turned off.
I hope this all makes sense how I'm explaining it. Because the information (not the form fields) on the document being sent out is changing every week, I was hoping there would be an easier way other than creating an entirely new Fillable Form for each. I'm not an expert with Actions but would it be possible to create an Action that would "Flatten" the type writer text only? That would at least prevent others from manipulating or deleting the information I have placed on the document.

This free JavaScript-based tool for Acrobat is what you need: http://www.uvsar.com/projects/acrobat/flattener/
The Typewriter tool creates a type of text box, so you'd select just that check box to flatten them.

On Mac, can't comment on pdf or save text typed into form

My colleague (on a Mac) can't open the comment tools after downloading a PDF and opening in Reader. Also, responses in text fields cannot be saved, as per the screenshot below:

Reader seems to be up-to-date...

Adobe Livecycle Form Printing Error for One Form

Only for this particular form, I am receiving the following error; all other forms are printing fine. Please assist us in understanding the error? <Sep 16, 2008 2:26:16 PM EDT> <Info> <WebService> <BEA-220024> <Handler weblogic.webservice.core.handler.InvokeHandler threw an exception from its handleRequest method. The exception was: javax.xml.rpc.JAXRPCException: weblogic.webservice.TargetInvocationException: Failed to invoke the target:com.adobe.formServer.ws.AdobeFSServiceImpl@1cf630a operation name:XMLGetForm method:public java.lang.String com.adobe.formServer.ws.AdobeFSServiceImpl.XMLGetForm(java.lang.String) throws java.rmi.RemoteException exception:java.rmi.RemoteException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US; nested exception is: com.adobe.formServer.interfaces.RenderFormException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US; nested exception is: java.rmi.RemoteException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US; nested exception is: com.adobe.formServer.interfaces.RenderFormException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US.>

Hi Donna,
the plug-in you are referring to is, as you correctly state, an Adobe plug-in for Adobe's LiveCycle product family.
The ISR integration of Interactive Forms in SAP is based on Adobe components in Interactive Forms (Designer and ADS) that are 'related' to LiveCycle, but in essence a separate development for SAP. In addition, the ISR integration was built on top of the originally implemented integration on both the ABAP and Java side.
Within NetWeaver, there is no support for using Adobe plug-ins for forms development in .NET. This would be something that Adobe might be able to assist you with, but I assume that this would be a professional service by Adobe.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

My hp deskjet f4488 doesnt print text but prints pictures in the same document

Im in a big trouble , I wrote a document in ms word and attached 1 picture to it and when I printed It only took out the picture and not the text , I have Dell inspiron n4010 ! help

Hi,
Which Word are you using ? Please try:
(a) In Word 2007 and 2010, click on Office Button > Word Options > Display > check the boxes for "Print drawings created in Word" and "Print background colors and images" > Advanced > scroll down to the "Show document content" section, check the boxes for "Show background colors and images in Print Layout view" and "Show drawings and text boxes on screen", and uncheck the "Show picture placeholders" box > OK.
(b) In Word 2003 or earlier, click on Tools > Options > View tab > check the "Drawings" box and uncheck the "Picture placeholders" box > Print tab > check the boxes for "Drawing objects" and "Background colors and images" > OK.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp all in one 6480 Will print text but will not print pictues

I can not determine why the printer will not print a picture but will print documents. It comes back paper jam but there is no paper jam.

Nobody? This has to be a simple fix, but I can't figure it out!

PDF Render Garbles Text, but I can't replicate

An acquaintance contacted me and told me that PDFs on my job market website aren't displaying correct. He sent a screenshot, so I know what he is looking at:
http://bensresearch.com/downloads/FF.png
(The PDF he is viewing is http://bensresearch.com/downloads/CV.pdf )
This is my job market site, so I want to make sure anyone can read the PDFs. However, I can't replicate it. I've tried to replicate it on Windows 7 & 8, Mac, with no joy. The built in PDF render in version 24 seems to read the pdf file fine. (I asked him what version he is running and he said version 24 on Windows 7 Enterprise).
Any ideas?
Thanks!

Here is some troubleshooting information about my computer system.

Adobe Reader downloaded 10.1.13 this morning. Now downoaded pdf docs show text but no photos included on the page. What do I do?

How do I get pdf documents that I have received to also show the included photos?

See if this helps: https://forums.adobe.com/thread/1681555

Interactive-adobe form Converting into PDF without print dialog

Hi Friends,
I would like to convert Interactive - adobe form into PDF without print dialog.which adobe form interface type is Smart Forms-compatible Interface.I have tried for solution.but I could not succeeded.How can resolve the issue.please help me.
Thanks
Ramesh M

Hi Friends,
I would like to convert Interactive - adobe form into PDF without print dialog.which adobe form interface type is Smart Forms-compatible Interface.I have tried for solution.but I could not succeeded.How can resolve the issue.please help me.
Thanks
Ramesh M

PDF Form Printing Text, but no Form

Similar Messages

Maybe you are looking for