PDF form sending data back as FDF

Hi there,
I created a pdf from a Indesign doc and opened it in acrobat 9 to use form wizard, I successfully managed to save and send the pdf from my mac to my partners pc. He was able to fill in the form but when clicking the submit by email button it was only sending me back the FDF file. I checked my settings on the submit button but had checked the box for 'PDF the whole document'. I had notes from an earlier version of acrobat and it stated that after I have created the form and saved the mailto button etc, under 'advanced' I should click on 'Enable usage rights in Adobe Reader'. Yet I could not find this so I tried 'Extend features in Adobe Reader' but this stills sends me back the FDF file which I cannot access the data from.
Ideally I would like the pdf to come back rather than the FDF is there any way this can happen?
Kirsty

Sorry, but I am a little confused.
Let me give you a scenario.
The user clicks the button on the JSP it sends the primary key value or user id to the servlet.
The servlet calls my session entity beans and returns data base on that call.
At that point the servlet has the data. Even if I set it in the session object in the servlet, I will have to populate the jsp how?
Do I set the values on the jsp from the servlet or within the jsp itself? Use setparameter, setattribute?
The button click starts it all off, but when the servlet is done processing, will I need to detect some other event in the jsp if I want to to populate the fields from within the jsp?
In other words, if I put code in the jsp to populate the text fields after the servlet is finished executing, what triggers the code ((YourObject) request.getSession().getAttribute("your key")) to process inside jsp?
I am making sense.

Similar Messages

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI
I filled in this form with important data. And saved it. I have since opened it and printed it again. Now when I open it the fields become blank I can see them for a split second as it clears them.
I believe I have updated to Reader XI since I filled it in.

Hi Pat,
Are you using Adobe Reader XI? And not Acrobat. It does not ask me to save the form if there are unsaved changes.
I have used previous versions of reader for saving this form data and it did allow me to save it with ctrl+s. And those versions did prompt me to save the changes before closing.
I guess I should not have updated the reader.

Exporting one specific pdf form field data to a specific webpage field

Hello there.
I am currently creating a form in which I need to export one specific pdf form field data to a specific webpage field to avoid typing it again or hitting ctrl+c and then ctrl+v to the webpage, as there are several records that need to be copied and pasted.
I read that there is no access to the clipboard within pdf therefore, would like to know if there is any way to do that without accessing the clipboard.
I am a newbie and have been learning by searching the forums and Google, therefore, would appreciate any insight on whether or not this is possible using javascript or the "submit form" funcion.
Any help is greatly appreciated!

Hi George, thanks for your response!
The main issue I have is that this web page is in fact a government page in which I have to manually copy and paste information.
I have no idea how to automate this process - I have access to the scripts on the page to see what I am able to do, but since I do not have much experience (only very basic javascripting), any other insight would be great!

How to send data back to publishing stream

Hi,
Environment: ActionScript3.0, FMS, Flash Project created in Flash Develop
How to send data back to publishing stream? I need to send data back to publishing stream.
Using NetStream.send() we can send data to subscribers but is it possible to send data from subscriber back to publisher using any NetStream method.
One other solution to this is remoteSharedObject, but if it is possible with NetStream class then let me know.
Thanks

There are a number of ways to extract data from CRM On Demand including:
* Export - manual process, generate CSV file containing CRM On Demand data
* List/Analytics - manual process, export the contents of a report of list to a CSV
* Web Services - programmatic, develop an application that queries for data within CRMOD
* Integration Events - programmatic, use workflow to trigger event creation and then poll for events to know when an operation occurs on a record (i.e. Insert of new Account record)
As for getting that data into another system, that will depend on the system and the methods available for inserting data that it makes available.
Hope this helps.
Thanks,
Sean

How to send data back to the server

i create a program to send data back to ther server using j2me.
its work well on emulator but when i install the application on sony ericsssin p910i or k700i or nokia 7710 then its not working and simply hang.
here is sample code which is run well on emulator but not on mobile.
what is the problem in that or how can this code run in mobile is there any mobile specific setting or internet setting.
Pls reply asap.
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
* An example MIDlet to invoke a CGI script.
public class ThirdExample extends MIDlet {
private Display display;
// String url = "http://www.javacourses.com/cgi-bin/getgrade.cgi?idnum=182016";
String url = "http://sampler.infopro.stpn.soft.net/midletdata.asp?name=name";
public ThirdExample() {
display = Display.getDisplay(this);
* Initialization. Invoked when we activate the MIDlet.
public void startApp() {
try {
getGrade(url);
} catch (IOException e) {
System.out.println("IOException " + e);
e.printStackTrace();
* Pause, discontinue ....
public void pauseApp() {
* Destroy must cleanup everything.
public void destroyApp(boolean unconditional) {
* Retrieve a grade....
void getGrade(String url) throws IOException {
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
TextBox t = null;
int x = 5, y =7;
try {
c = (HttpConnection)Connector.open(url);
c.setRequestMethod(HttpConnection.GET);
c.setRequestProperty("IF-Modified-Since", "10 Nov 2000 17:29:12 GMT");
c.setRequestProperty("User-Agent","Profile/MIDP-1.0 Confirguration/CLDC-1.0");
c.setRequestProperty("Content-Language", "en-CA");
os = c.openOutputStream();
String str = "?idnum=182016";
byte postmsg[] = str.getBytes();
for(int i=0;i<postmsg.length;i++) {
os.writeByte(postmsg);
os.flush();
is = c.openDataInputStream();
int ch;
while ((ch = is.read()) != -1) {
b.append((char) ch);
System.out.println((char)ch);
t = new TextBox("Final Grades", b.toString(), 1024, 0);
} finally {
if(is!= null) {
is.close();
if(os != null) {
os.close();
if(c != null) {
c.close();
display.setCurrent(t);
}>

i create a program to send data back to ther server using j2me.
its work well on emulator but when i install the application on sony ericsssin p910i or k700i or nokia 7710 then its not working and simply hang.
here is sample code which is run well on emulator but not on mobile.
what is the problem in that or how can this code run in mobile is there any mobile specific setting or internet setting.
Pls reply asap.
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
* An example MIDlet to invoke a CGI script.
public class ThirdExample extends MIDlet {
private Display display;
// String url = "http://www.javacourses.com/cgi-bin/getgrade.cgi?idnum=182016";
String url = "http://sampler.infopro.stpn.soft.net/midletdata.asp?name=name";
public ThirdExample() {
display = Display.getDisplay(this);
* Initialization. Invoked when we activate the MIDlet.
public void startApp() {
try {
getGrade(url);
} catch (IOException e) {
System.out.println("IOException " + e);
e.printStackTrace();
* Pause, discontinue ....
public void pauseApp() {
* Destroy must cleanup everything.
public void destroyApp(boolean unconditional) {
* Retrieve a grade....
void getGrade(String url) throws IOException {
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
TextBox t = null;
int x = 5, y =7;
try {
c = (HttpConnection)Connector.open(url);
c.setRequestMethod(HttpConnection.GET);
c.setRequestProperty("IF-Modified-Since", "10 Nov 2000 17:29:12 GMT");
c.setRequestProperty("User-Agent","Profile/MIDP-1.0 Confirguration/CLDC-1.0");
c.setRequestProperty("Content-Language", "en-CA");
os = c.openOutputStream();
String str = "?idnum=182016";
byte postmsg[] = str.getBytes();
for(int i=0;i<postmsg.length;i++) {
os.writeByte(postmsg);
os.flush();
is = c.openDataInputStream();
int ch;
while ((ch = is.read()) != -1) {
b.append((char) ch);
System.out.println((char)ch);
t = new TextBox("Final Grades", b.toString(), 1024, 0);
} finally {
if(is!= null) {
is.close();
if(os != null) {
os.close();
if(c != null) {
c.close();
display.setCurrent(t);
}>

Send Data back to the Server

Hi.
how to send data back to the server using J2ME or how to communicate with server using J2ME

i am using http its work well on emulator but when i install the application on sony ericsssin p910i or k700i or nokia 7710 then its not working and simply hang.
here is sample code which is run well on emulator but not on mobile.
what is the problem in that or how can this code run in mobile is there any mobile specific setting or internet setting.
Pls reply asap.
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
* An example MIDlet to invoke a CGI script.
public class ThirdExample extends MIDlet {
private Display display;
// String url = "http://www.javacourses.com/cgi-bin/getgrade.cgi?idnum=182016";
String url = "http://sampler.infopro.stpn.soft.net/midletdata.asp?name=name";
public ThirdExample() {
display = Display.getDisplay(this);
* Initialization. Invoked when we activate the MIDlet.
public void startApp() {
 try {
getGrade(url);
 } catch (IOException e) {
 System.out.println("IOException " + e);
 e.printStackTrace();
* Pause, discontinue ....
public void pauseApp() {
* Destroy must cleanup everything.
public void destroyApp(boolean unconditional) {
* Retrieve a grade....
void getGrade(String url) throws IOException {
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
TextBox t = null;
int x = 5, y =7;
try {
c = (HttpConnection)Connector.open(url);
c.setRequestMethod(HttpConnection.GET);
c.setRequestProperty("IF-Modified-Since", "10 Nov 2000 17:29:12 GMT");
c.setRequestProperty("User-Agent","Profile/MIDP-1.0 Confirguration/CLDC-1.0");
c.setRequestProperty("Content-Language", "en-CA");
os = c.openOutputStream();
String str = "?idnum=182016";
byte postmsg[] = str.getBytes();
for(int i=0;i<postmsg.length;i++) {
os.writeByte(postmsg);
os.flush();
is = c.openDataInputStream();
int ch;
while ((ch = is.read()) != -1) {
b.append((char) ch);
System.out.println((char)ch);
t = new TextBox("Final Grades", b.toString(), 1024, 0);
} finally {
if(is!= null) {
is.close();
if(os != null) {
os.close();
if(c != null) {
c.close();
display.setCurrent(t);

How to populate Adobe LiveCycle Designer generated PDF Forms with data from Database in Windows app

Hi
I have a PDF template designed in Adobe LiveCycle Designer. This template has form fields which needs to be filled with data programmatically. I am using windows application in C#.Net 2005 in which I want to retrieve data from database and merge this data into PDF form in respective fields.
How this can be achieved?
I searched a lot & I found that we can process the XDP file generated from PDF to acheive this. I created the XDP file out of the PDF template created in designer. But I don't know how to merge data from database into that XDP file in respective fields and again convert this XDP file back to PDF programmatically. Can anybody help me ? This is urgent.
Thanks in advance.
Sambhaji

Please ignore the above code. The following one is correct one. using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.ContentType = "application/vnd.adobe.xdp+xml"; StringBuilder responseString = new StringBuilder(); responseString.Append("<?xml version='1.0' encoding='UTF-8'?>"); responseString.Append("<?xfa generator='AdobeLiveCycleDesigner_V8.0' APIVersion='2.5.6290.0'?>"); responseString.Append("<xdp:xdp xmlns:xdp='http://ns.adobe.com/xdp/'>"); responseString.Append("<xfa:datasets xmlns:xfa='http://www.xfa.org/schema/xfa-data/1.0/'>"); responseString.Append("<xfa:data>"); responseString.Append("<form1>"); responseString.Append("<TextField1>Homer</TextField1>"); responseString.Append("<TextField2>Simpson</TextField2>"); responseString.Append("<field name ='DropDownList1'>"); responseString.Append("<items save='1'>"); responseString.Append("<text>1</text>"); responseString.Append("<text>2</text>"); responseString.Append("<text>3</text>"); responseString.Append("</items>"); responseString.Append("</field>"); responseString.Append("</form1>"); responseString.Append("</xfa:data>"); responseString.Append("</xfa:datasets>"); responseString.Append("<pdf href='C:\\Test.pdf' xmlns='http://ns.adobe.com/xdp/pdf/' />"); responseString.Append("</xdp:xdp>"); Response.Write(responseString); Response.Flush(); Response.End(); } }

PDF form responses coming back uneditable

I have created a lengthy form in InDesign (v.9.2) for a client, which I have exported to PDF then extended in Acrobat Pro (11.0.06) under File > Save as Other > Reader Extended PDF > Enable More Tools.
This makes the form savable (if that's a real word.) The form is sent to their clients, which they fill in, save and send back by email.
When the form returns, my client wants to be able to edit some of the responses further (mainly checkboxes) then re-save but the Save option in file menu is greyed out. The purple bar says 'Click "Sign" to fill out and send this form etc...'. If you try to 'Save as > PDF', it will only save a blank copy of the form.
I assume the client's clients use Reader for the input, and the client definitely uses just Reader.
I have suggested using an original copy and checking all the checkboxes that the client specified, but they are getting a lot of these forms back and that would be too time-consuming.
Is there a way round this without them having to upgrade to Acrobat Pro? That would make them distinctly unhappy. Though if the community decreed that was the only option, it could be considered.
Any help greatly appreciated!

The form that you sent is not Reader-enabled, so that would be the reason it's not savable with Reader versions prior to 11. Reader 11 is able to save non-enabled forms, so I would your clients could use it, but this doesn't help unless all of the people they distribute it to use Reader 11 as well.
You should not provide clients with Reader-enabled forms, except for testing purposes. If they will be distributing a form for the purpose of collecting data and need Reader-enabled forms, they need to enable them with their own version of Acrobat. This is an Acrobat licensing issue.
The Acrobat license also limits the licensee from using data from no more than 500 instances (including hardcopies) of an enabled form if the form has been made available to more than 500 recipients. A way to avoid this limitation is to use Adobe's FormsCentral service, which allows PDF forms to securely submit the form data, which is collected by a server. A team or people can have access to the data and export any response as a filled-in PDF, which can be further edited as they want. They could instead set up their own web server to collect submissions, but this requires some expertise and more expense, particularly if security is needed. A form can also be set up to submit just the form data by email, which also avoids the licensing limitations, but since email is not secure and notoriously unreliable, it should not be considered for anything of much importance.
Note that Acrobat Standard is sufficient for enabling the form for use with Reader.
You should also make them aware of the Preview problem that I mentioned earlier. If they encounter a form that has been corrupted by Preview, they should export the form data and import it into the original blank form. They will need Acrobat for this.

Submit pdf form fields data as customized template

Hi
Is it possible to submit pdf form fields as a customized template?
when the form is submited, I want it to be emailed to me as text form and the form field data would be autopopulated into the text template.
Im not sure but is this how fdf works?
if so, how do i get my form to be submitted as fdf?
please help.
thanks.

Here you go .....the 3 fields at the top are where you enter data. The allfields field is the field that creates your special format and teh submitted data field is what you woudl recieve in the email. Note that i changed th ebinding for the first three fields so that they are not included as separate items in the data file. This shoudl simplify what you recieve. I cam change the format of what is written to the allfields if you need a different distinction. In this example I hardcoded everything ....depending how many fields there are on yours i woudl use a different approach (using some complicated code) but the concept woudl be the same. I woudl find all of the fields on your form and loop through all of these objects in a for loop construct this will reduce th eamount of code dramatically and also allow you to modify the form to add or remove fields as you see fit without having to change the code.
Make sense?
Paul

Allow reader users to save pdf form with data

I want to create a form that an adobe reader user can open and save a copy as a pdf with the data in the form. I know that requires reader extensions - what i can't seem to figure out is if I already have this included and how to do it. I have LiveCycle Designer ES 8.2 - which is the download I end up at when searching LC with reader extensions.
Does anyone have instructions on how to do this or know whether that functionality is available in the version I'm running?

You can add the Reader Extesnion right to save the form with data locally in two different ways.
1. In Acrobat Pro open the form and under the Advanced/Extend Features in Adobe Reader will walk you through a wizard. Once the wixard is finished, save the file and use that one. This technique is limited to 500 users by licence.
2. LiveCycle Reader Extensions Server has a User Interface that allwos you to pick the rights you want. There are no luser imitations to this option.
If you do not have either, option 1 is a lot simpler. You can download a trial copy of Acrobat Pro and try it.
Paul

Prepopulating PDF forms with data from XML file

How can I get a PDF form to open pre-populated with data from an XML file automatically? I've been using Adobe LifeCycle Designer 8.0 and there doesn't seem to be a way to do it. The closest I came was to use the ImportData method, but that only lets you specify a data file if the form is signed (certified), which these aren't and don't need to be because we're using them on an internal company web page. ImportData works if there is no file name, but then the user has to navigate to and select the correct file, which we can't rely on our users to do.
I've researched this problem for days on this and other websites and haven't found an answer (one Adobe advisor suggested purchasing LifeCycle Forms, which is not an option because it's a $10,000 software package and the company wouldn't authorize a purchase that steep). We will buy a less-expensive option if there is one. We'll even hire a consultant if we can find one to who can design a supportable solution. All suggestions will be much appreciated.

Hi Sharon
The easiest way is:
- Open your PDF form within Acrobat
- From the File menu, import the XML form data into the form
- From the File menu, use Save As... to save the file with a new name.
The new PDF will be identical to the original one, but will have the data embedded in it. Voila.
If you want the same form to pre-populate with different XML files depending on the circumstances, or if you're generating the XML on the fly, then things get more complicated. (And more expensive.) As your consultant said, LiveCycle Forms is one option, but it is expensive (actually even more than 10K). There are other options, including Cold Fusion, custom servlets, etc.
Howard
http://www.avoka.com

Can a HTML form send data to two servlets?

I would like to know if an HTML Form can send data to two servlets, I guess I am askin is that can the parameters be passed to two ACTION attributes??

Hmmmm, well I'm not sure if that is possible, but you could do something of the sort on the server side by chaining them.... the technieque is called Servlet Chaining
Hope this helps
Omer

Pdf form for data from another form with data, xml or pdf, tables not expanding

Sir,
I am using Adobe Acrobat 9 Pro and LifeCylce to do these forms. I have made several subforms for a Risk Assessment for the mission they fly. I have also made up another form with tables that would connect with each subform data. This form also will give me and others a % of the values received from the data to help us with seeing problem area towards Safety.
I am able to connect the data to the form from the Risk Forms but when I go and add another group of data it over writes the data that was already in the data collection form. The tables are dynamic and able to expand with the generated data but when I compile several Risk Forms, xml. data into one single data group, the receiving tables will not except this data. To compile the data I am in Acrobat and using the form-manage form data-merge data to spreadsheet than enter as a report that is xml. Still not working. I also tried to save the form, with data already in the tables, and then opened it again and add data to it, it will over write the existing data in the form. This form does work great with the generated data in LiveCycle.
Any suggestions???

Thanks Paul
Did as you said and for each subform binding tab made sure I have "Repeat subform for each data item" checkbox and still no change when I add the data.
I even tried to combine the xml data and that file just has the main page and not the data pages. just another problem that is happening.
Any other suggestions on this expanding tables and receive single forms one at a time.
Bill

Java Server/Client Applicaton - problem with sending data back

Hello!
I'm trying to write a small server/client chat application in Java. It's server with availability to accept connections from many clients and it's app just for fun... However, I've come up against a huge problem: everything what clients send, arrives to server (I'm sure about that because it is displayed on the Server Application screen) and then server should send it back to all clients but it doesn't work. I have no faintest idea what causes this problem. Maybe you can help me?
Here is my server app code:
import java.net.*;
import java.util.*;
import java.io.*;
* @author Robin
public class Server {
 ServerSocket serw = null;
 Socket socket = null;
 String line = null;
 Vector<ClientThread> Watki = new Vector();
 ClientThread watek = null;
 public Server(int port) {
 try {
 serw = new ServerSocket(port);
 line = "";
 while(true) {
 System.out.println("Running. Waiting for client to connect...");
 socket = serw.accept();
 System.out.println("Connected with:\n" + socket.getInetAddress() + "\n");
 watek = new ClientThread(socket);
 Watki.addElement(watek);
 Watki.firstElement().Send("doszlo?");
 }catch (IOException e) {
 System.out.println("BLAD: " + e);
 public void sendToAll(String s) {
 for(int i = 0; i < Watki.size(); i++) {
 Watki.elementAt(i).Send(s);
 public class ClientThread extends Thread {
 Socket socket;
 DataInputStream in = null;
 DataOutputStream out = null;
 String line = null;
 public ClientThread(Socket s) {
 try {
 this.socket = s;
 in = new DataInputStream(s.getInputStream());
 out = new DataOutputStream(s.getOutputStream());
 start();
 }catch (IOException e) {
 System.out.println("BLAD: " + e);
 public void Send(String s) {
 try {
 out.writeUTF(s);
 }catch (IOException e) {
 System.out.println("BLAD: " + e);
 public void run() {
 try {
 line = "";
 while (true) {
 line = in.readUTF();
 System.out.println(line);
 sendToAll(line);
 }catch (IOException e) {
 System.out.println("BLAD: " + e);
 public static void main(String[] args) {
 Server serwer = new Server(5000);
}And here is client app code:
import java.net.*;
import java.util.*;
import java.io.*;
* @author Robin
public class Client implements Runnable {
 Socket socket = null;
 BufferedReader keyIn = new BufferedReader(new InputStreamReader(System.in));
 DataInputStream in = null;
 DataOutputStream out = null;
 String line = null;
 public Client(String host, int port) {
 try {
 System.out.println("Connecting to " + host + ":" + port);
 socket = new Socket(host, port);
 System.out.println("Connected\nTALK:");
 out = new DataOutputStream(socket.getOutputStream());
 in = new DataInputStream(socket.getInputStream());
 line = "";
 while(!line.toLowerCase().equals(".bye")) {
 line = keyIn.readLine();
 Send(line);
 }catch (UnknownHostException e) {
 System.out.println("BLAD: " + e);
 }catch (IOException e) {
 System.out.println("BLAD: " + e);
 public void Send(String s) {
 try {
 out.writeUTF(s);
 }catch (IOException e) {
 System.out.println("BLAD: " + e);
 public void run() {
 String loaded = "";
 try {
 while(true) {
 loaded = in.readUTF();
 System.out.println(loaded);
 }catch (IOException e) {
 System.out.println("BLAD: " + e);
 public static void main(String[] args) {
 Client client = new Client("localhost", 5000);
}By the way, this app is mainly written in English language (text that appears on the screen) however in functions I used Polish language (for example: BLAD - it means ERROR in English). Sorry for that :)

Yeap, I will change those exceptions later, thanks for advice.
You asked what's going on with it: both applications start with no errors, but when I write something in client side it should be sent to the server and then forwarded to all connected clients but it stops somewhere. However, I added a one line to the server code
line = in.readUTF();
System.out.println(line);
sendToAll(line); and after it reads message from client (no matter which one) it shows that message on the server side screen, then it should send this message to all clients but it doesn't work in this moment. What's confusing: no errors occurs, so it's rather a mistake in my code, but where?
Edited by: Robin3D on Sep 30, 2009 9:07 AM

9914 and sending data back across the bus.

We are programming a device with the 9914 chip, and we can write commands to the device, but are having trouble getting the device to write data back. When using the interactive tool, by executing "ibrd 100" is the device addressed as the talker? What is a fairly straight forward method for passing 1 byte of data from the device to the controller? We have a routine that waits till the TA bit in ISR1 sets, before it placed the byte in the CDOR. But the TA bit never sets, even after we execute ibrd 100 with the interactive tool. Is there something else we need to do? Any help would be appreciated.
Thanks
Rick

Enabling interrupts should not have an affect. Can you give me a summary of how you are setting up the chip? For example, what are you setting in the ADR register? This register sets the addressing mode of the chip. If you are not setting it up correctly at address 3, you would, of course, not get an interrupt.
So, lets assume you are setup correctly. There are a couple of different things to try.
1) You can look at the MAC bit in ISR0. This is the My Address Changed bit, which should set everytime your addressing mode changes.
2) Note that the NAT9914 does not have static bits in the ISR registers. If you read a register, the bit will clear automatically. Just in case something else asserted along with MA and you hand
led it but forgot to check MA, you will lose it.
3) You can try setting MA IE. This will not generate an interrupt if you have interrupts disabled, but it will cause an NDAC holdoff. In this case, the ibrd 100 should timeout on the host side if the device is actually doing the holdoff.

PDF form sending data back as FDF

Similar Messages

Maybe you are looking for