PDF Generation Error Message:Couldn't open File while generating PDF from a Frame (7.2 Version) book

Hi,
I'm trying to convert a book into PDF and I get the error message Couldn't open a file (... <filename>.fm) and the unavailable Fonts dialog box also appears. The tricky thing is I've converted the same book into PDF just a couple of days ago. Now when I tried to do it again, I get the above mentioned error message. I tried unselecting the File > Prefrences > General > Remember Missing Fonts checkbox too. However, it didn't help in generating the PDF. I will be thankful if anyone suggests a suitable workaround for this issue. Thanks in advance.

Usually, deselecting Remember missing fonts works.
The missing fonts message displays when you or FrameMaker opens the file. The workaround is to open all the files in the book, or at least those with the "missing" font, clearing the message for each file. Now print the book to PDF, while keeping the files open. This usually works because you have already cleared any missing fonts messages.

Similar Messages

Premiere Elements - Error 2048 couldn't open file......Question

Windows 8.1
6 gigs of ram
I get the following error when I attempt to open a created file for viewing.
"Error- 2048: Couldn't open file.....not a file Quicktime understands.
I am creating the file in the default NTSC 720 format. I get the same message with trying to wide screen format.
This error seems new as it did not use to happen.
Can someone explain how to correct this error. In researching the problem I came across:
1. trying third party repair software (which doesn't seem to solve the problem.)
2. that the error refers to an error with the movie rendering (as opposed to the audio.)
Been working on this for four hours. Any help is certainly appreciated. Thanks.
- Craig

Craig
What version of Premiere Elements on your Windows 8.1 (assumed 64 bit)? For now I will assume 11, 12, or 13.NT
Please confirm that your export setting from Premiere Elements were
Publish+Share
Computer
QuickTime
with Presets = NTSC DV 16:9
and that you did not customize the settings, just hit save to get your widescreen DV.mov export.
That export should be fully playable with the latest version of QuickTime.
If you confirm that QuickTime player is rejecting it with your error 2048, then uninstall and install QuickTime
with the antivirus and firewall(s) disabled.
a. Try to open the existing DV.mov again in QuickTime
and
b. Create a new DV.mov in Premiere Elements and try to open it in QuickTime.
What are the results from a and b?
We will be watching for your progress.
Thank you.
ATR

Error message: "Can't open file"

Using Keynote 3.0.x I try to open a keynote file created a year ago and when I try to open the "Opening" dialog comes up, you see the progress bar, and then, I get the error message, "Can’t open file" followed by the file name. Any recourse?
PowerMac G5 Mac OS X (10.4.7) FInal Cut Pro 5.1

I later discovered the file was damaged. Went back to a backup copy and things were fine. Good think we have backups.

N79 (Error message :Unable to open .File type not ...

Dear nokia service manager,,
Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
pls reply me..its very urgent...thanku..

You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

PDF SCANS ERROR MESSAGE: CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

OFFICEJET PRO 8600 PLUS , WIN 7, SCAN TO COMPUTER AS A PDF FILE. ERROR MESSAGE: "
CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

Hi @reddog2,
I would contact HP Cloud Services for assistance. Call 1-855-785-2777.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Error message Could not open file....on application server

Hi Experts,
we are using 3.1 production server which has four application servers, after harware upgrdation we are facing connectivity problem with datastage.
daily the infospkoes and abap programs are faling with the message "Could not open file........on application server".
when we trigger manually on one server then it gets success, means we are facing problem with other 3 appliction servers. we do not know how to go about this issue.

Hi,
This is error RSBO214 and can be due to upper/lower case letters within your destination path.
Maybe you have changed the path in transaction SE16?
In case you change the destination manually, you have to make sure that that the directory exists and that the authorizations are set up correctly for the extraction user.
Rgds,
Colum

Iweb installed on a new computer but i have this error message: Can't open file "~/Library/Application Support/iWeb/Domain.sites2."

I have just installed ilife on my new computer from my disk. I have several backups of my webpage from my old computer. Everything would be great if I could just run the program. When I click the icon for iWeb I get the following message: Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
Somebody please help! I desperately need to update my website.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Keynote error message: "Can't open file..."

I use Keynote almost every for work. Recently I got this message "Can’t open file [insert file name]". I thought if I update to Lion and then got Keynote '09 I would fix the problem. Unfortunately it did nothing. Any help would be greatly appreciated.

Hi Trevor26,
We had the same problem here. This amazingly simple solution worked: http://www.tuaw.com/2012/08/07/invalid-keynote-document-calm-down-and-try-this-f ix/

ERROR MESSAGE Can't open file in DW8

After downloading Dreamweaver 8 trial version.
Download was sucessful. Installation was successful. I opened the
program to proceed to build a webpage. I was able to open a HTML
file. and I was UNABLE to open any image file... I attempt to open
jpg file... I get error message saying Dreamweaver can't open jpg
file Please open HTML, XML or other compatible files. When I
attempted to open a gif file ... another error message same but for
gif in place of jpg. I checked the other programs and other
programs did not have the same problem. I was able to open file
from Internet Explorer or WS FTP. but NOT in Dreamweaver. IT is the
only program that I am not able to open ANY of the image files. I
am not able to continue to evaluate this version before deciding
whether it is what I would like to order. I have heard many good
things about it so I wanted to give it a try but no... I did not
get a good start. I need advise what to do about it. Thank you. A
quick reply will be greatly appreciated.

Are you trying to open a .jpg file directly in Dreamweaver?
Or are you
trying to insert an image into your page?
Dreamweaver is not an image editor so the former would not
work.
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"12345xy" <[email protected]> wrote in
message
news:e3vot6$hnq$[email protected]..
>
After downloading Dreamweaver 8 trial version.
Download was
> sucessful.
> Installation was successful. I opened the program to
proceed to build a
> webpage. I was able to open a HTML file. and I was
UNABLE to open any
> image
> file... I attempt to open jpg file... I get error
message saying
> Dreamweaver
> can't open jpg file Please open HTML, XML or other
compatible files. When
> I
> attempted to open a gif file ... another error message
same but for gif in
> place of jpg. I checked the other programs and other
programs did not have
> the
> same problem. I was able to open file from Internet
Explorer or WS FTP.
> but
> NOT in Dreamweaver. IT is the only program that I am not
able to open ANY
> of
> the image files. I am not able to continue to evaluate
this version
> before
> deciding whether it is what I would like to order. I
have heard many good
> things about it so I wanted to give it a try but no... I
did not get a
> good
> start. I need advise what to do about it. Thank you. A
quick reply will
> be
> greatly appreciated.
>

Error message: "Can't open file "[File path, file name].key"

If I attempt to open any Keynote files, I now get this error message.
"Can't open file "[File path: file name].key"
To clarify, the text in the square brackets above would be the file path and then the file name.
The file then will appear on the screen, but is unresponsive to any clicks or menu commands.
The files will open successfully on other Macs, so they aren't corrupt.
Also - I've just checked, and opening Keynote and trying to create a new presentation leads to the same problem: All screen menus / buttons are dead - all I can do is drag the window around the screen.
I've tried to reinstall Keynote, but this hasn't resolved the problem.
Is there some corrupt preference file (or similar) that I need to get rid of? Is there an easy way to do a complete uninstall of Keynote so I can try another install? Or is this a symptom of something else?
All ideas gratefully appreciated!
Message was edited by: Brendan Donlon

All the issues I describe in my questions around this time re: Keynote were actually symptoms of a soon-to-die laptop. The Hard Disc was corrupting, and Keynote was the first application to be affected.

Getting Error message couldn't open XPCOM and can't open ANY pages

After load of updates were completed, I keep getting this Error 'COULDN'T OPEN XCOM' I can't open any programs or emails, Firefox won't open or IE. Have tried System Restore a number of times without any luck, even that doesn't complete successfully, starting to tear my hair out now.

This is usually a problem with a failed update that caused a corrupted installation that still has older files.
Do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Error message that - cannot open file

I'm getting an error message that says I cannot open a file because it was saved with a newer version of Adobe InDesign CC... I thought I've installed all possible updates - can anyone offer some insight as to what the problem is? Thanks!

Hi,
New release of InDesign CC is not an update of older InDesign. It can coexist with older InDesign CC. It would be available in creative cloud app as a separate installer named InDesign CC (2014).
Regards
-Anshul

Error message 'Unable to open file "3d.cst.ink"'

hello guys, I have this message when I open the .dcr file on the web browser. any ideias?

My guess would be that you created (accidentally or not) a shortcut (*.lnk file) when developing your project and that this is now causing you problems. Whether it's the shortcut you uploaded instead of the cast file, or whether the movie is looking for the shortcut instead of the cast, is impossible to say - but you should explore both of those possibilities.

IWeb o8 error message " Couldn't Save File .. dont have permission to make

this is a screen capture of the error message i am getting. pls help. any ideas ?
http://img.photobucket.com/albums/v626/Jimmy-pop/Picture1-3.png
I'm just trying to update my web sight, new pages, text and photos. i have no idea what this MobileMe crap is. But ever since that feature was initiated, i cannot save or update my iWeb site. can anyone help me?
thanks,
joel
Message was edited by: Jimmy_pop
Message was edited by: Jimmy_pop

Hello Joel,
Locate Domain file at ~/Library/Application Support/iWeb/Domain
right-click file and from info window select drop-down for Sharing & Permissions then make sure Privilege is set to Read & Write.
hth

Error message -10660 when opening files

I've just bought a MacBook Pro 17, and repeatedly (but not every time) when I try to open a document, I'm getting an error message saying "The operation could not be completed. An unexpected error occurred (error code -10660). I have checked Get Info on the document and it's set to open with the correct application. And it does... if the application is open. I'm getting the error code only when the application is closed. Any ideas?
Thanks!

Hi, Steve.
See my "Resetting Launch Services" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

PDF Generation Error Message:Couldn't open File while generating PDF from a Frame (7.2 Version) book

Similar Messages

Maybe you are looking for