Pdf image good in preview but distorted when printing without preview

Hi all, I have added a graphic to my adobe form and it looks good when I view the pdf. It also prints fine when I open the pdf and then print it. The problem is when the pdf is sent directly to the printer without previewing it, the image will print but the colors will be distorted.
The image was saved as 256 colors bmp and uploaded using SE78.
Any help is appreciated:). Thanks.

HI friend,
I think it might be the problem with the printer settings just check that else what it must have happened is some code gets trigerred during the print preview which makes the color to print correctly.
But while sending directly that part of code might not have been executed. Try to debug if possible and see whether its because of this else see the printer settings.
I think this might be the issue there might not be any error from smartform.
Just check the driver program print settings also.
If you still face issues please revert back to me i will help you.
Thanks,
Sri Hari.

Similar Messages

  • Chinese characters appear OK in preview but not when printed

    I am working on sap script .
    In which I am facing problem in printing Chinese character.
    In the spool(print preview) I am able to see Chinese characters printed but while printing on a paper it is appearing as '#' Characters.
    I am using Font Family as COURIER in basic settings and If I try changing Font to CHSONG(Chinese character font), alignment getting distorted.
    I have tried several options available in SDN, but not able to find exact solution on the issue.
    Please help me with proper solution.

    HI friend,
    Try changing the device type which suits the Chinese font. There are many device types which support device types.
    Example : CNSAPWIN.
    Just try this friend. If you face queries please revert back to me i will help you.
    Thanks,
    Sri Hari

  • Adobe form company logo image color is distorted when printing

    Hi all, I have added an graphic to my pdf it looks good when I view the pdf. It also prints fine when I open the pdf and then print it. The problem is when the pdf is sent directly to the printer without previewing it, the image will print but the colors will be distorted.
    Any help is appreciated:). Thanks.
    Edited by: Katie Doody on Jan 4, 2012 12:16 PM
    Edited by: Katie Doody on Jan 5, 2012 7:43 AM

    Please try with the below steps:
    1) Open the Pdf which you want to Print.
    2) Select Print button.
    3) From the dialog box, select Properties.
    4) then select Advanced.
    5) Click on  "Edge-To-Edge" and from the drop-down select "Enabled"
    Find the screen-shot below for reference....
    Naveen

  • Captivate 3 shows skin in preview but not when I run after published?

    Captivate 3 shows skin in preview but not when I run after published.  It shows it is included, what's up?

    Is the Skin externalised?  If so, perhaps Flash Global Security is interfering:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
    You could also try NOT externalising the skin.

  • Load swf works in Publish Preview but not when published

    Hi Folks,
    I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
    SecurityError: Error #2000: No active security context.
    I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
    Any help would be much appreciated and rewarded with Karma
    movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
    var fl_Loader_9:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_9:Boolean = true;
    function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
    if(fl_ToLoad_9)
      fl_Loader_9 = new Loader();
      fl_Loader_9.load(new URLRequest("search.swf"));
      addChild(fl_Loader_9);
    else
      fl_Loader_9.unload();
      removeChild(fl_Loader_9);
      fl_Loader_9 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_9 = !fl_ToLoad_9;
    movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
    var fl_Loader_10:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_10:Boolean = true;
    function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
    if(fl_ToLoad_10)
      fl_Loader_10 = new Loader();
    fl_Loader_10.load(new URLRequest("refunds.swf"));
      addChild(fl_Loader_10);
    else
      fl_Loader_10.unload();
      removeChild(fl_Loader_10);
      fl_Loader_10 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_10 = !fl_ToLoad_10;

    I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

  • Artwork doesn't print when printing cd insert, it shows on the preview but doesn't print?

    Hi, after downloading the latest version of Itunes, the artwork no longer prints on the cd insert? It shows on the preview, but doesn't print on the insert? It worked fine before and the printer is working fine, it prints color photos and artwork, no problem?

    Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
    iCloud: Locate your device

  • When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

    When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
    Please help!

    It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

  • Standard text displayed correctly in print preview but not in print

    Hi,
    I have a script in which a standard text has to be printed in the output.
    The standard text contains some german characters.
    These characters are displayed correctly in print preview but not in print.
    The text is maintained in 3 languages DE,EN and Russian.
    The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
    Please suggest something.
    Regards,
    Richa Aggarwal

    Hi Richa,
    Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
    It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters.  If a character does not display then that means it does not exist in the font that you are using.
    Regards,
    Ryan Crosby

  • When printing from Preview, the document prints with large print and many lines added and pages added

    When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

    Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
    Thanks again for helping me resolve this problem.

  • Adobe Reader X: Print without previewing is unreadable.

    Adobe ReaderX: Preview and print is fine, Print without previewing is unreadable.  What's the issue?  They are basic fonts, Courier, Helvetica, Times.

    I have just found this post and am still experiencing this problem, still, even after updating to 10.1, and still trying the disabling of Protected Mode at startup. I am running Windows 7, 32bit version. I am trying to print to an HP 4500 series plotter, on ARCH size D (24x36). Once I set all of my settings and hit print, I receive two dialogue boxes. One says "The document could not be printed." Once you click "OK", a second box pops up that says, "There were no pages selected to print." However, under "Print Range", I had "All" selected.
    All worked fine before updating to Acrobat X.
    Thank you in advance for your help.
    Nick

  • PDF images visible in Adobe but not Preview or Mac Mail's Quick Look

    I have a PDF that I am inserting an ad into. I copy and paste the ad from one PDF into another. The problem I am having is when I have the final 10-page PDF with the ad inserted in it, you can open the 10-page PDF in adobe and the ad will be visible, but if you open it in Preview or using Mac Mail's Quick Look, the ad isn't there. When I open the original file with the ad in it (that I copied and pasted the ad from) in Quick Look or Preview, the ad appears. I need to know why the ad isn't showing up after it is copy and pasted into a new PDF?
    files can be viewed below or at this address:
    http://6letters.com/help/
    "lanai3_Grand Jewels-001Winning.pdf" is the document I am copying the ad from
    "lanai_122211.pdf" is the document I am pasting the ad into. The ad is on page 10. The ad is viewable in Adobe Acrobat but not in Preview or Mac Mail's Quick Look.
    I am using Adobe Acrobat Pro 9 (version 9.4.6) to do the copy/paste/save.
    I just clicked the above link and the ad doesn't show up online now either. It is supposed to be in the blank space on page 10.
    Any help much appreciated!!!!!!

    Hi,
    Acrobat 9 and older versions paste images as a stamp/comment which (that poorly functional) Preview cannot see, so you need to "flatten" the page if you want to see a pasted picture in Preview.
    (Preview, Mail and QuickLook shares the same rendering library)
    You can easily flatten one or several pages in a PDF using this free tools: http://abracadabrapdf.net/articles.php?lng=fr&pg=717

  • Image Distortion When Printing

    Had an ad supplied for a book that was printed digitally. Entire book printed fine except for page with this ad. I got an image drop shadow, but it was way out of position and distorted. Printed claimed it was a bad PDF. All's I did was place a customer-supplied PDF on the page in InDesign, then exported entire book to print-ready PDF. It was fine throughout all proof stages, but when book delivered, I got the strange image distortion. ???
    Thanks.

    Hi peterpica,
    You might try printing this image with a different printer and then check.
    What version of Acrobat are you using?
    There might be some problem of low resolution from the printer.
    So, please check and let me know.
    Regards,
    Anubha

  • Site works in preview but not when uploaded to the web

    I have been trying to add a link from my website to another project I have been doing, a mini site made with Flash.
    I wanted the link to open up a new window with the animation playing inside, and it works perfectly when I use "preview in safari" within dreamweaver, but now I've uploaded to the web it just opens up a blank window.
    This is the url for the homepage:
    http://kayleighthompson.com/
    and the link is the ActiveAid button at the bottom of the navigation list.
    If anyone knows how to get this working I'd be very grateful! It's for a uni project due in this afternoon :S

    I think you may be having a problem with how Flash is displayed. The Flash on the first page doesn't display in IE8... although it does in Chrome. The second page doesn't display in either. Your link is correct. I checked that.
    Wish I could be more helpful, I'm having the same issue with IE and DW CS4 myself, and can't figure it out.
    This may help: http://code.google.com/p/swfobject/wiki/documentation
    Good luck! Let me know if you figure it out.
    [email protected]

  • Effects mask ok in preview but ignored when file created

    APE10: I applied a B&W mask to a portion of the image.  It works fine in preview, but when I generate ("share") it as an .mpg file, the effect is ignored.

    Actually, I need to clarify...   It did not have a red line when I started.  The red line appeared only after applying the effects mask.
    Sony DCR-SR200, set at HQ, wide
    The files are .MPG
    The initial settings were: NTSC-hard disk, flash memory camcorders - widescreen 48KHz
    General & video settings show...
    Editing mode: DV NTSC
    Timebase: 29.97fps
    frame size: 720x480
    Pixel aspect ratio: D1/DV NTSC Widescreen 16:9 (1.2121)
    Fields: upper field first
    Display format: 30fps drop-frame timecode
    Title safe area 20x20
    Action safe area 10x10
    Also, can you tell me what APE settings I should be using with this video camera?

  • Query works in preview, but not when added under a Query Group

    Hello Experts-
    I'm trying to use this query as one of the options under the drop down on the Supplier Search under the Supplier Management.
    Error message:
    while trying to invoke the method com.sap.odp.comp.query.QueryParamValue.getPromptParamDef() of a null
    object loaded from local variable 'paramValue' while trying to invoke the method
    com.sap.odp.comp.query.QueryParamValue.getPromptParamDef() of a null object
    loaded from local variable 'paramValue'
    The query itself is complicated, but it works fine when executed under preview.
    Wondering if any one has ever seen this behavior and knows of any typical causes?
    Thanks,
    Mike

    Thanks for the offer, Vignesh.
    Sorry, I'm currently having trouble duplicating it, but next time it happens I'll try to get some screenshots.
    I have narrowed it down to blank values in optional string fields when the query loads. I fixed (kind of) the ones I was having trouble with by rearranging the filter parameters so there would not be blanks.
    Thanks again,
    Mike

Maybe you are looking for