PDF Indexierung auf dem IIS7 unter Windows Server 2008 mittels IFilter

Hallo,
ich suche nun schone eine ganze weile nach einem Ifilter oder einer vergleichbaren Lösung für den IIS7 unter Windows Server 2008.
Ich möchte meine eingesetzten PDF - Dokumente im Web "durchsuchbar" machen. Dazu habe ich mir gedacht, ich installieren einen Ifilter (Die Lösung habe ich früher bei dem IIS5 angewandt) und indexiere die PDF - Dokumente und realisiere so, dass die Besucher der Webseite über die Suche auch die hinterlegten PDF Dokumente durchsuchen können.
Hat das schon irgendjemand mittels IIS7 realisiern können und mag mir einen Tipp geben, wie man das anstellt? Bitte keine Sharepoint Lösung anbieten.
Cuxhaven09

Similar Messages

How to configure Crystal Reports 2008 and IIS7 and Windows Server 2008?

I have downloaded and installed the trial for Crystal Reports 2008 on our Windows 2008 server. I can open Crystal Reports on the server just fine, but I get HTTP 500 errors when I attempt to view a report hosted on that server via the web.
As far as I can tell, the handler mappings in IIS7 are not configured properly, although I confirmed that the Crystal Reports 2008 install did add several handlers. I read that I must configure the application pool to enable 32-bit applications. I did that and am still getting the same error. Documentation seems sparse and I've spent the better part of the day searching the forum here with no luck. What am I missing?

Don,
Thank you for the quick response!
We will ultimately be using ASPX/C#, but this simple case has a very basic report with no databind, just a single text label that reads "test succeeded" and I'm attempting to access it by direct URL (i.e. "http://192.168.99.21/crystalreportviewers12/test.rpt"). This works on our Windows 2000 server running Crystal Reports 8.
I've also tested with a simple test.aspx file with only the line "Response.Write(System.DateTime.Now.ToString())" and that works just fine. This file is in the same folder as the test.rpt file.
If I leave the Application Pool set for the "Integrated" managed pipeline mode, I continue to get a rather generic "500 - Internal server error". If I switch it to "Classic", I get the following error:
Failed to Execute URL.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Failed to Execute URL.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Failed to Execute URL.]
   System.Web.Hosting.ISAPIWorkerRequestInProcForIIS6.BeginExecuteUrl(String url, String method, String childHeaders, Boolean sendHeaders, Boolean addUserIndo, IntPtr token, String name, String authType, Byte[] entity, AsyncCallback cb, Object state) +2004965
   System.Web.HttpResponse.BeginExecuteUrlForEntireResponse(String pathOverride, NameValueCollection requestHeaders, AsyncCallback cb, Object state) +390
   System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state) +223
   System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8674594
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155

Upload the MVC File in window server 2008

i want to upload the mvc file in server 2008
installed iis7 in window server 2008. please forward the Pre-Requirements for upload the mvc file and how to upload the mvc file.
i want to host mvc file in window server 2008. please help me.
Thank you

On Tue, 10 Feb 2015 18:03:54 +0000, madudhula mahesh wrote:
i want to upload the mvc file in server 2008
installed iis7 in window server 2008. please forward the Pre-Requirements for upload the mvc file and how to upload the mvc file.
i want to host mvc file in window server 2008. please help me.
This forum, as the name should indicate, is only for Windows Server 10
issues. Since your question appears to be about IIS repost to:
http://forums.iis.net
Paul Adare - FIM CM MVP
Q. how many hackers does it take to screw in a light bulb?
A. Huh?...What? Oh, it's dark in here?

Running Windows Server 2008 R2 OS, just downloaded a free copy of Adobe X1? Will not open PDF File

Running Windows Server 2008 R2 OS, just downloaded a free copy of Adobe X1 download completed successfully but will not open (or read) any PDF File...Help!

You write "download", but did you also install it?

Disable OCSP in Windows Server 2008 / IIS7

Is it possible to disable OCSP Stapling on Windows Server 2008 / IIS7?
The problem is that
FF30 does not allow access to a secure site if the server supports OCSP Stapling and the user's computer time is in the past. The error is sec_error_ocsp_future_response. So users are not able to access our site simply because their time is incorrect!
If they don't report the error to us, we can't tell them what to do about it and we lose customers. So we need to disable OCSP Stapling.
I've tried these thing with no luck:
add RequestOCSP of type DWORD and set it to
0 to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters\
certutil –setreg chain\ChainCacheResyncFiletime @now
certutil -urlcache ocsp delete
OCSP Stapling is commonly disabled (for example,
sites such as amazon and google disable it). Please let me know how to disable
OCSP Stapling on IIS7.

Hi, please check on iis.net's forum. You will have a bigger audiance than there. I unfortunaly cant move the thread there.
Thanks you for your understanding
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Windows Server 2008, IIS7, SQL Server 2005 - Will this work?

Hi,
Not super concerned about it being supported at this point, BUT, can I run/install CR XI SP2 on Windows Server 2008, IIS7, SQL Server 2005?
I've reference the System Requirement stuff and it was written before Server 2008 was released.
If it's possible, any help on what to install/not install would be great appreciated.
Thanks,
Mike

Try it. If it works great. As you are using ASP, your app must be using craxdrt.dll. This dll has been retired and no longer ships with CR 2008, so even when the next SP for CR 2008 releases, it will be of no use to you. If the ASP app does not work on the server, you may want to post your query to the Legacy Application Development SDKs forum:
SAP Crystal Reports - Legacy SDKs
and see if anyone can help.
Other than that, the only option will be to go to .NET once SP 1 releases for CR 2008, or use CR 10.5 which bundles with .NET 2008.
Ludek

Insatallation von Adobe CS5 auf Windows Server 2008 R2

Hallo miteinander!
Hat jemand schon Erfahrungen gemacht mit der Installation von Adobe CS5 auf Windows Server 2008 R2/ Remote Desktop host? Auch im Hinblick auf den Einsatz von Virenscannern?
Über jeden Tipp/ link/ Hinweis/ Anregung usw. bin ich dankbar.
Vielen Dank im Voraus.

I was able to figure out a solution.
CAUSE:
It appears that the Internet isn’t fully up to date and ready to use EDns -- which is enabled on Windows Server 2008 R2 by default. The solution for this is to disable Edns. Note that this isn’t
a problem for most Windows Server 2008 R2 member servers. It’s only a problem for DNS *servers* that do recursive lookups. i.e. likely only your domain controller will be affected if that is where your DNS Server role exists.
SOLUTION:
To disable EDns, you can do it from the command prompt, or by editing the registry.
Create a DWORD called EnableEDNSProbes and set to 0 in HKLM\SYSTEM\CurrentControlSet\services\DNS\Parameters
Restart the DNS Server service for it to take effect.

Unable to open Office files on SharePoint 2010 sites on Windows Server 2008 R2

Setup: Windows SharePoint Server 2010 sp1 on Windows Server 2008 R2 (hosted on VMWare VSphere ESXi 5.1)
Secured using Domain SSL from GlobalSign.
Client OS: Windows 7 Professional 32bit & Windows XP SP3 32 bit
Browsers: IE10, IE9,IE8
Office: Office 2010, Office 2010 sp2 (both 32bit), Office 2007
Problem Description: Only recently, users started having issues with opening Office files (Word, Excel) on SharePoint sites. When you click on an Office file e.g. Word Document, it comes up with the option to select "Ready only" or "Edit"
and choosing either options and re-entering the login credentials results in the
application hanging. If you leave it for a while (about 5 minutes) sometimes the file opens and other times it gives the error "Could not open https://portal.com/XXX/XXX/Document.docx". Even when it opens, it's extremely
sluggish and can't do anything other than end it via Task Manager. Same with excel files.
This happens to all the users all different OS and browsers.
On XP Pro SP3 w/ IE8, when you click on the file, the login prompt keeps popping back up repeatedly and if you click cancel, the file loads up anyway but no way of saving back onto the SharePoint site.
IMPORTANT: One exception is when logged in as a Site Collection Administrator, it
works like a dream bizarrely!!!! Opens, Edits and saves back fine on the SharePoint site.
Have tried following:
1. Repaired Office 2010 Pro; Uninstalled/Re-installed Office 2010 Pro
2. Reset Browser, unticked automatically detect proxy settings.
3. Emptied OfficeOfflineCache on Client
4. Removed WebDAV from the SharePoint server
5. Added Antivirus folder exclusion (We use SEP 11) on the SharePoint Server
Note: PDF files opens fine for all users.
I would immensely appreciate if anybody has got any advice/pointers/suggestions. Desperately out of ideas at the moment.
regards,
Compter Sez No!

Hi,
According to your description, When you try to open a Microsoft Office document from a SharePoint 2010 site in a client application, the document opens slowly and you are prompted to enter your credentials multiple times.
This issue may be because of SharePoint Web Front End (WFE) server(s) has Antivirus software installed and the exceptions are not set correctly.
I recommend to remove the antivirus software or set the correct permissions for the antivirus software to resolve the issue.
To configure the antivirus exceptions, please follow the guidelines in the below articles:
KB943620:
Folders to exclude when you perform a file-level antivirus scan on a server operating system.
KB952167:
Certain folders may have to be excluded from antivirus scanning when you use a file-level antivirus program in SharePoint.
KB943556:
Recommended file and folder exclusions for Microsoft Forefront Client Security or Forefront Endpoint Protection 2010.
Best regards.
Thanks

Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

Hi All,
Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
I am Posting this bcoz I did not found any ODDC related Blogs.
Please help on this
Thanks,
Raj

The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

Webi scheduling error in BO 4.0 SP04 after security patch updates in windows server 2008 R2

We are getting below error in BO 4.0 SP04 Web Intelligence report scheduling after security patch updates in windows server 2008 R2
while trying to invoke the method com.businessobjects.sdk.core.server.IServer.getServerContext() of an object returned from com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.getServer(com.businessobjects.sdk.core.context.IContext, com.businessobjects.rebean.wi.model.engine.IDocumentInstance)
We have reverted back security patch but still giving above scheduling problem in BO 4.0 SP04 WebI and we can view and refresh report.
Is there any way to fix the scheduling problem in BO 4.0 SP04 WebI?

HI,
Check SAP notes if they will help you.
1934855 - Scheduled Web Intelligence documents fail with com.businessobjects.sdk.core.server Error
1916443 - Scheduling Web Intellignce reports which are having long names to excel and pdf fails.
1792921 - Unable to schedule Webi documents in Excel or PDF format

Crystal Reports 2008 Runtime, Windows Server 2008 64-Bit AND SharePoint2007

Hi Guys,
here i'm again.
Well I'm developing on a 32-Bit OS with Crystal Reports 2008. I've deployed my solution to SharePoint, but when i try to call a report in the aspx-Website i get the following error:
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Here are the technical details:
- Windows Server 2008 (64Bit)
- IIS7
- Microsoft Office Server 2008 (64Bit)
- Crystal Reports 2008 SP3
I've read, that there isn't a 64-Bit runtime version of CR2008. Then i tryed the two following suggestions i found in this forum:
1. Try to run the IIS-Application-Pool in 32-Bit-Mode -> This don't work, because SharePoint then throws a "Internal Server Error - Code 500" (no SharePoint Sites are available).
2. Try to compile the Visual Studio Project as 32-Bit -> This don't work, because SharePoint could not load the assembly
Well, are there any other hints, suggestions or experiences how i could get this to work?
Thanks in advance,
Christian
Edited by: C.Kaiser on Oct 12, 2010 5:22 PM

Hi,
I Have a Doubt Similarly which is related to the above post.....
I had created a asp.net website with sql db, Its running fine in my PC, But when i host it in my server It shows an Error like..
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Design, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. "
I am Using Visual Studio 2010, and my Server is Windows Server 2008 R2 32bit
I am also attaching the screenshot of the error.
Can anyone Please Help me , Its Very urgent..
Anyone Please Help Me ,,,, Its Very Urgent .......
Thanks In Advance...

Crystal Report 2008 on Windows Server 2008 64bit

hi,
I tried to run a Crystal Reports Web Application on a Windows Server 2008 64bit but I got this error:
"Bei der Erzeugung des Reports ist ein Fehler aufgetreten.
Der Typeninitialisierer für "CrystalDecisions.CrystalReports.Engine.ReportDocument" hat eine Ausnahme verursacht.
CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Fehler beim Versuch, die Crystal Reports-Laufzeit zu laden.
Entweder reichen die Berechtigungen des Crystal Reports-Registrierungsschlüssels nicht aus, oder die Crystal Reports-Laufzeit wurde nicht ordnungsgemäß installiert.
Installieren Sie die geeignete verteilbare Crystal Reports-Datei (CRRedist*.msi), die die erforderliche Version der Crystal Reports-Laufzeit (x86, x64 oder Itanium) enthält. Weitere Informationen erhalten Sie unter folgender Adresse: http://www.germany.businessobjects.com/support/default.asp.
"Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information."
The System:
- Windows Server 2008 Standard 64bit SP2
- Microsoft .NET Framework 3.5 SP1
- Oracle Client 10gR2 64bit
- I tried Crystal Report 2008 Runtime, Crystal Report 2008 Runtime SP1, Crystal Report 2008 Runtime SP2, Crystal Report 2008 Runtime SP3.
- Crystal Report Basic Runtime for Visual Studio 2008 (x64)
On a 32bit-system or 32bit-mode (and 32bit Oracle Client) everything is working fine. But I have to use the 64bit Oracle Client, therefore, Crystal Report have to work in 64bit-mode.
Is it possible and what is to do to get it working, thanks,
Martin

It does work on 64 bit OS - as a 32 bit application. CR 2008 is 32 bit only.
See the article [Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] for more info.
Ludek

Printing from OSX Lion Client to Windows Server 2008

I have tried these methods:
=============
via System Preferences
IP Printer (Line Printer Daemon - LPD)
Address (both Server Name and IP Address)
e.g. lpd://servername/queue
Queue
Print Using (HP LaserJet P4010 Series)
Result:
After a test print is sent, the print queue dialog reads:
Processing Job.
Copying Print Data.
Connecting to Printer.
Paused - "/usr/libexec/cups/backend/lpd failed"
**** I have also tried using the hostname in place of the IP address
I get something to the effect of:
D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
D [10/Nov/2011:12:24:35 -0500] [Job 27] Pre-processing tasks:
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Post-processing tasks:
D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
D [10/Nov/2011:12:24:35 -0500] [Job 27] Read 8170 bytes of print data...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Wrote 8170 bytes of print data...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to 10.157.32.92:515 for printer DOBL_24HR1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to printer.
D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [10/Nov/2011:12:24:35 -0500] [Job 27] STATE: -connecting-to-device
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to printer.
D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to 10.157.32.92:515 (local port 1009)...
D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command 02 DOBL_24HR1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Sending command string (12 bytes)...
D [10/Nov/2011:12:24:35 -0500] [Job 27] Reading command status...
D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command returning 1
D [10/Nov/2011:12:24:35 -0500] [Job 27] Backend returned status 1 (failed)
D [10/Nov/2011:12:24:35 -0500] [Job 27] Printer stopped due to backend errors; please consult the error_log file for details.
D [10/Nov/2011:12:24:35 -0500] [Job 27] End of messages
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state=5(stopped)
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-message="/usr/libexec/cups/backend/lpd failed"
D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-reasons=paused
=============
via System PreferencesWindows *navigated to the server (e.g. smb://servername/printer/) with the browser.
Result:
After a test print is sent, i login to the dialog box with:
DOMAIN\USERNAME
PASSWORD
(*) Remember this password in my keychain
Status - On Hold (Authentication Required)
**** I have also tried various formats for the username here:
DOMAIN\USERNAME & password
USERNAME & password
SERVER\USERNAME & password
Here's the Log output:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Queued on "DOBL_24HR1" by "lab".
D [10/Nov/2011:12:26:21 -0500] [Job 28] job-sheets=none,none
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[0]="DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[1]="28"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[2]="lab"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[3]="testprint"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[4]="1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=3671 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:ad3091e2-399a-3964-4c78-b8a81bf25bdf job-originating-host-name=localhost time-at-creation=1320945980 time-at-processing=1320945980 PageSize=Letter"
D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[6]="/private/var/spool/cups/d00028-001"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[0]="<CFProcessPath>"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[9]="HOME=/private/var/spool/cups/tmp"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[11]="[email protected]"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[12]="SOFTWARE=CUPS/1.5.0"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[14]="USER=root"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[17]="IPP_PORT=631"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[18]="CHARSET=utf-8"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[19]="LANG=en_US.UTF-8"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[20]="APPLE_LANGUAGE=en-US"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[21]="PPD=/private/etc/cups/ppd/DOBL_24HR1.ppd"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[22]="RIP_MAX_CACHE=128m"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[23]="CONTENT_TYPE=application/vnd.cups-banner"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[24]="DEVICE_URI=smb://utlab-prsrv-02/DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[25]="PRINTER_INFO=DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[26]="PRINTER_LOCATION="
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[27]="PRINTER=DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[28]="PRINTER_STATE_REASONS=none"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[29]="CUPS_FILETYPE=document"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[30]="FINAL_CONTENT_TYPE=printer/DOBL_24HR1"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[31]="AUTH_I****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[32]="AUTH_U****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[33]="AUTH_P****"
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 7646)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgpdftops (PID 7647)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/pstops (PID 7648)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 7649)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started backend /usr/libexec/cups/backend/smb (PID 7650)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Started smb backend (PID 7653)
D [10/Nov/2011:12:26:21 -0500] [Job 28] STATE: +connecting-to-device
D [10/Nov/2011:12:26:21 -0500] [Job 28] Connecting to printer...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Connecting to printer...", current level=INFO
D [10/Nov/2011:12:26:21 -0500] [Job 28] Looking up "utlab-prsrv-02"...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Authentication required", current level=ERROR
D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend (PID=7653) stopped with status 512
D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend will exit with status 2
D [10/Nov/2011:12:26:21 -0500] [Job 28] load_banner(filename="/private/var/spool/cups/d00028-001")
D [10/Nov/2011:12:26:21 -0500] [Job 28] hpPostProcessing launched
D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - copying to temp print file "/private/var/spool/cups/tmp/01ddf4ecb23b2"
D [10/Nov/2011:12:26:21 -0500] [Job 28] Final document orientation - 0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Setting language to en-US
D [10/Nov/2011:12:26:21 -0500] [Job 28] EWU support is absent for device.
D [10/Nov/2011:12:26:21 -0500] [Job 28] Pages per sheet - 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] Orientation - portrait
D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
D [10/Nov/2011:12:26:21 -0500] [Job 28] Pre-processing tasks:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%EndComments     Processor - DriverVersion     "Insert driver info"     (pre, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Post-processing tasks:
D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
D [10/Nov/2011:12:26:21 -0500] [Job 28] Allowing document iterator to handle job termination...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Using line-by-line file iteration...
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - using PPD file "/private/etc/cups/ppd/DOBL_24HR1.ppd"...
D [10/Nov/2011:12:26:21 -0500] [Job 28] PS Matching Mode = AP_ApplicationColorMatching
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - documentMediaBox.size.width = 612, documentMediaBox.size.height = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
D [10/Nov/2011:12:26:21 -0500] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_comments - %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] %APL_DSC_Encoding: UTF8
D [10/Nov/2011:12:26:21 -0500] [Job 28] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Title: (testprint)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Creator: (cgpdftops CUPS filter)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%CreationDate: (Thursday, November 10 2011 12:26:21 EST)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%For: (lab)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%DocumentData: Clean7Bit
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%LanguageLevel: 3
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Pages: 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%BoundingBox: (atend)
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%PageOrder: Ascend
D [10/Nov/2011:12:26:21 -0500] [Job 28] %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_prolog - userdict/dscInfo 5 dict dup begin
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_setup - %%BeginSetup
D [10/Nov/2011:12:26:21 -0500] [Job 28] Before page loop - %%Page: 1 1
D [10/Nov/2011:12:26:21 -0500] [Job 28] Copying page 1...
D [10/Nov/2011:12:26:21 -0500] [Job 28] pagew = 588.0, pagel = 768.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageLeft = 12.0, PageRight = 600.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageTop = 780.0, PageBottom = 12.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] PageWidth = 612.0, PageLength = 792.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor DriverVersion before line %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
D [10/Nov/2011:12:26:21 -0500] [Job 28] Received SIGPIPE
D [10/Nov/2011:12:26:21 -0500] [Job 28] Wrote 1 pages...
D [10/Nov/2011:12:26:21 -0500] [Job 28] Backend returned status 2 (authentication required)
D [10/Nov/2011:12:26:21 -0500] [Job 28] Job held for authentication.
D [10/Nov/2011:12:26:21 -0500] [Job 28] End of messages
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state=3(idle)
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-message="Authentication required"
D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-reasons=none
==============
via CUPS (localhost:631)here is the syntax of my printer addresses:
SAMBA--
smb://username:password@serverhost/printer
smb://username:password@serverip/printer
smb://serverhost/printer
smb://serverip/printer
I get something like...
"/usr/libexec/cups/backend/smb failed"
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_comments - %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] %APL_DSC_Encoding: UTF8
D [10/Nov/2011:12:39:00 -0500] [Job 29] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Title: (testprint)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Creator: (cgpdftops CUPS filter)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%CreationDate: (Thursday, November 10 2011 12:39:00 EST)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%For: (lab)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%DocumentData: Clean7Bit
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%LanguageLevel: 3
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Pages: 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%BoundingBox: (atend)
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%PageOrder: Ascend
D [10/Nov/2011:12:39:00 -0500] [Job 29] %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_prolog - userdict/dscInfo 5 dict dup begin
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_setup - %%BeginSetup
D [10/Nov/2011:12:39:00 -0500] [Job 29] Before page loop - %%Page: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] Copying page 1...
D [10/Nov/2011:12:39:00 -0500] [Job 29] pagew = 588.0, pagel = 768.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageLeft = 12.0, PageRight = 600.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageTop = 780.0, PageBottom = 12.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] PageWidth = 612.0, PageLength = 792.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor DriverVersion before line %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
D [10/Nov/2011:12:39:00 -0500] [Job 29] Current page number is 0
D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor PageAccounting after line %%Page: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] PAGE: 1 1
D [10/Nov/2011:12:39:00 -0500] [Job 29] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
D [10/Nov/2011:12:39:00 -0500] [Job 29] ATTR: auth-info-required=username,password
D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend (PID=8517) stopped with status 512
D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend will exit with status 2
D [10/Nov/2011:12:39:00 -0500] [Job 29] Received SIGPIPE
D [10/Nov/2011:12:39:00 -0500] [Job 29] Wrote 1 pages...
D [10/Nov/2011:12:39:00 -0500] [Job 29] Backend returned status 2 (authentication required)
D [10/Nov/2011:12:39:00 -0500] [Job 29] Job held for authentication.
D [10/Nov/2011:12:39:00 -0500] [Job 29] End of messages
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state=3(idle)
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-message="Authentication required"
D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-reasons=none
=================
So yeah...
I'm totally stumped now.
I feel like I've tried every method imaginable, but still no luck.
Printing from OSX 10.6.8 works just FINE.
On the server side, I'm running Windows Server 2008... there's only a local admin and a local user account.
Clients running OSX Lion 10.7.2 -- All updated.
Printer is an HP LaserJet P4010-4510 series.
Workstation is an iMac 21.5-inch, Late 2009
3.06 Ghz Intel Core 2 Duo
Please help!!!
--- Richard

LPD print service is not enabled by default in Server 2008. It can be enabled via the Print Serveer role, but I am remote and cannot confirm the exact setting.
As for SMB, the error log is showing;
Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/"
So it would suggest that there is still an issue with the account detail you are using as you show you have tried this syntax at one stage. If you want to continue to create the queue using SMB rather than LPD then I recommend using the CUPS web page (http://127.0.01:631) to create the queue. This will allow you to enter the syntax exactly as the error message shows. From previous testing I found it was okay to just use the account name rather than domain/account name on a domain bound server.

Poor print performance with Adobe Reader 11.0.06 on XenApp 6.5/Windows Server 2008 R2 SP1

Hi community,
here are informations to our environment:
Windows Server 2008 R2 with SP1 - mspatchlevel 05/2014
XenApp 6.5 RP3 + Hotfix_XA650R01W2K8R2X64003 + Hotfix_XA650R03W2K8R2X64013
AcroRead.msi + 11001.msp + 11003.msp + 11004.msp + 11006.msp
Network: 10GB
Problem:
After migration to Adobe Reader 11.0.06 our users are complain about long printingtimes with PDF documents.
What i have done:
Test printing two different documents from local storage an network (dfs,nfs) - notice the printingtime in our environment depends not on used storage!
1. 310 pages document with text (7,023KB)
Adobe Acrobat XI on Samsung ML-451x 501x Series driver Version 3.11.39.00.58.01
Average 52 seconds (done 5 same printjobs with same dokument) to print document in spooler.
Change printer to:
Adobe Acrobat XI on Samsung CLP-770 Series PCL6 Version 3.10.57:76
Average 46 seconds (done 5 same printjobs with same dokument) to print document in spooler.
2. 4 pages document with grafics (4,438KB)
Adobe Acrobat XI on Samsung ML-451x 501x Series driver Version 3.11.39.00.58.01
Average 45 seconds (done 5 same printjobs with same dokument) to print document in spooler.
Change printer to:
Adobe Acrobat XI on Samsung CLP-770 Series PCL6 Version 3.10.57:76
Average 39 seconds (done 5 same printjobs with same dokument) to print document in spooler.
Befor migration we have Server 2003 SP2 and XenApp 4.5FR6 with Adobe Reader 9.5.5
I did the same testing but the time to print was much faster!
1. 15 Seconds to print 310 pages document
2. 28 seconds to print 4 pages document with grafics
Any ideas to make printing faster on WindowsServer 2008R2 with Adobe Reader?
Next step is testing the old version from reader on 2008R2 but on security aspects is this not the way...
Thx
Thomas

Hi Pat,
thx for your answer :-)
i will try the older one 9.5.5 and the newest 11.0.07
Regards,
Thomas

Can't browse anything in Windows Server 2008 R2 SP1

Hi,
Need your help and expertise. Suddenly, i can't browse anything in my Windows Server 2008 R2 SP1 with IIS7. I tried already three(3) different browsers (IE8, Firefox & Chrome). Before, i can browse (using IE8 & Firefox) both private (LAN) and public
(Internet) websites be it via ip address or domain name without any issues whatsoever. In fact, i can't even access the local http website (status in IIS7 is Started) my server is hosting.
The only problem occured just yesterday in my server was drive C: got disk full but i was still able to access via RDP the server and free up disk space of 80GB. I tried already to clear the browsser history,
disable the add-ons of IE8 and turn-off the firewall. I have NOT tried to reset IE8 settings, disable third-party
program or service and startup in msconfig as it require reboot of the server. I'm apprehensive
to do things i mentioned i have not tried since the server is up and running for 919 days and 17hours. It is why i tried other browsers that i even installed Chrome just to test and troubleshoot the browsing problem.
Thanks
iootoo

Maybe this one helps.
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/8ca76e02-c80c-4648-8983-33b5715adb41/no-microsoftcom-server-reachable-ie-address-is-not-valid-changes-to-http
or possibly ask over here.
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ieitprocurrentver
Also check IE|Tools|Internet Options|Connection|LAN SETTINGS
is correct and possibly Automatically Detect
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

PDF Indexierung auf dem IIS7 unter Windows Server 2008 mittels IFilter

Similar Messages

Maybe you are looking for