.pdf .jpg impossible à lire via preview

J'arrive pas à lire les pdf et les jpg, après lecture de tous les blogs j'ai:, J'arrive pas à lire les pdf et les jpg, après lecture de tous les blogs j'ai cherché:
com.apple.preview.plis
com.apple.Preview.bookmarks.plis
pour les deleter mais ils existent dans mon mac
et ensuite j'ai lancé via utility
le verify disk permission et ensuite le repair
mais encore rien... les pdf jgp via preview ne s'ouvent pas.

Restart. If an application won't quit and prevents restarting, select
 ▹ Force Quit...
from the menu bar, then select the frozen application from the list and press return. As a last resort, force a shutdown by holding down the power button for a few seconds. Then press it again briefly to start up. Test.

Similar Messages

  • Image Added to PDF FFile via Preview Adds Large, White Border

    ::not sure where to stick a 'Preview' discussion::
    I've downloaded several books as PDF files to add to my iBooks app on my iPhone, and I'm wanting to give them their respective book covers. I open the PDF file in Preview, drag and drop the image to the top of the list to create the cover, but I get an ugly, white border around the image itself. There is no white border on the image file itself, so I have no idea why this border is being created.
    I've noticed smaller image files have a larger border, but the image I'm using is 716x1024. It doesn't matter if I increase the image size to help reduce the white border, it still remains.
    Any advice?

    Edited to add - sorry, my description was slightly wrong.
    If I open a single .JPG in a new Preview, and save it as a .PDF, the dimensions are fine. The issue only occurs if I try to add .JPG's to existing PDF's.
    It also occurs if you use the shell to convert a single JPG image, i.e.
    "/System/Library/Printers/Libraries/./convert" -f /users/me/downloads/cvg06300162.jpg -o /users/me/downloads/cvg06300162.pdf
    - this gives the reduced size image as well.

  • Canu2019t view Chinese characters in a PDF email attachment sent via SAP.

    Canu2019t view Chinese characters in a PDF email attachment sent via SAP.
                     When open the Chinese characters come out funny.
                     Note: The document looks okay when previewed in SAP.
    Tried the following:
    FM CONVERT_OTF_2_PDF
    CNSONG is one of our u201CSystem fontsu201D
    Attempted with both ZH(Chinese simplified) and ZF(Chinese traditional) languages
    Tried using a printer that is set up as u201CDevice Typeu201D PDF1
    Tried using a printer that is set up as u201CDevice Typeu201D ZHKPDF
    Tried passing device type as u201CCNSAPWINu201D
    The following ADODE software was loaded: Chinese simplified, Chinese traditional,
                                                                              Korean and Japanese

    Hi,
    As a try, can you check this.
    SET COUNTRY 'CN'. China country code.
    SET LOCALE LANGUAGE 'CN'.
    Thanks,
    Vinod.

  • Upload PDF directly to printer via Citrix from off-site computers

    Is it possible to upload PDF documents directly to the newer HP printers, especially the business printers and copiers (MFDs)?  We have HIPAA-containing data that home-based users must print at work, and therefore cannot be sent via the cloud.
    Our current printer vendor supports uploading PDFs directly, which our users are using.  The workflow involves printing via PDFCreator, then opening the web interface print tab of the device they are printing to and uploading, via a browse button, the PDF document.  The connection is handled through our Citrix remote access servers, everything is encrypted, and all data stays out of the cloud.
    Because HP's ePrint is in the cloud, we cannot submit HIPAA-containing data via that route.
    If no current HP products have that capability, can it be added?  I would think a firmware update to have an upload option would be very doable.  It appears that the ability to print PDFs is already present via ePrint--this would only be another way to submit a print job.
    Our current printer vendor's device functionality includes being able to upload and print other print-ready formats, including .PCL and .PS files, but we aren't using that capability currently.  It would be nice to be able to upload .DOC/.DOCX formats directly.

    Hey SPS64,
    Thank you for participating in the HP Consumer Support Forums!  The steps you desire are not going to be found on Consumer grade printers, but may be able to be found on some of the Enterprise level printers from HP.  I would advise posting this question on the Enterprise printing boards where there are many experts who would be willing to assist with your question.
    http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
    Best of luck,
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

    I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.  When I drag the doc in a line would show up in the past, and if I went above th eline all was good.  It doesn't have a line, and no matter what I try I am having no success.
    Please help!

    According to an Apple Support article, unless there are unforeseen issues
    in file ownership or permissions, the combining of .PDFs should be simple.
    •OS X: Combining PDF documents using Preview - Apple Support
    There are a few variable and similar methods, some change with version
    of OS X in use; some vintage OS X may vary a little in the process...
    A variety of similar topics appear in search results, with terms:
    " mac os x combine pdf into one " such as this page shows...
    https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
    If the system is older than Mavericks there may be other methods to try.
    Suggestions are among linked results in the search. I see a few fair ones.
    •Here's another that offers generally similar suggestions...*  this info looks OK, extra links, do not:
    http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
    { note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
    If you have a problem after trying other methods, based on an OS X
    your computer is running, post back with more exact information...
    Good luck & happy computing!
    edited

  • Can i use pandrive with iPad, i want to access word, excel, pdf files on iPad via pandrive

    Can i use pandrive with iPad, i want to access word, excel, pdf files on iPad via pandrive

    You cannot use pendriver.
    Have a look at the following:
    http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
    http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
    http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
    http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1

  • Error while attaching PDF to FI doc via SAP services

    Hi,
    I am calling SCMS_DOC_CREATE_FILES funtion module to attach PDF to FI doc via SAP services and SAP internally calling standard function 'HTTP_POST_FILESu2019 with RFC_DESTINATION u2018SAPHTTPAu2019 and returned error due to connection fail.
    RFC DESTINATION SAPHTTPA checked and   its working fine.
    call function 'HTTP_POST_FILES' destination rfc_destination
        EXPORTING
          uri                   = absolute_uri
          path                  = component_path
          proxy                 = proxy
          trace                 = http_trace
          prefix                = component_prefix
          user                  = user
          pwd                   = password
        IMPORTING
          status                = status_code
          stext                 = stext
          error                 = cerror
          etext                 = comp_err
        TABLES
          resp                  = response_entity_body
          resphead             = response_headers
          reqhead               = request_headers
          comp                  = components
          compx_255             = componentsx
        EXCEPTIONS
          system_failure        = 1  message msg
          communication_failure = 2  message msg.
         output:   Sy-subrc is 0 and status_code is '403'
    response_entity_body internal table return the below error information:-
    -     HTTP/1.1 403 Forbidden
    -     Server: Apache-Coyote/1.1
    -     X-ErrorDescription: Genuine channels operation exception: Can not connect to the remote host "gtcp://127.0.0.1:49008". System error message: No connection could be made because the target machine actively refused it 127.0.0.1:49008.
    -     Content-Type: text/html;charset=utf-8                           Date: Tue, 08 Nov 2011 21:36:02 GMT
    -     Connection: close
    Please help i am not to able find the reason why i am getting status_code is '403' and RFC failed.
    Thanks
    Sireesha
    Edited by: Sireesha_SAP on Nov 10, 2011 8:53 PM
    Edited by: Sireesha_SAP on Nov 10, 2011 10:16 PM

    Hi,
    I would like to know what font type, you are using in the forms.
    Ideally it should be HELVETICA .
    If you are using any other font in your style/form,try changing it to HELVETICA & Test.
    Also Check the OTF data at the call of gen. FM,before converting it to PDF.
    Regds,
    AS
    Edited by: abheesawant on Oct 12, 2011 7:48 AM

  • In Adobe froms - Sending PDF file as Attachment  via email

    I have to develop a <b>PDF form</b> and one more requirement; I have to change the mail Content (body) and the Subject line which should have attached PDF file.The (Transaction Code VA21) Has the sending the Email part. My  Requirement is to <b>Change the Content (body) and the Subject</b>. 
    Requirement;
    When customer request for the quote, quote document is created in SAP (Transaction Code VA21). Promised Price, quantity, date is communicated to customer via quote output. Customer may decide to place firm order with reference to quote.
    So this form (PDF file and send via email) is used to communicate the AMAT quote to customer. The PDF file will be as a attachment in the mail. With change subject line, and content of the mail (Thanks for the Quote, Please don’t reply to this mail). It also consists of applicable terms & condition of the quote.
    Is it possible to handle the Content and the Subject of the mail in Program or Form layout (SFP). or it's Enhancement?
    How to go about it? I tried a lot. At last am contacting you. Please.............. Let me know. Very urgent.Point will be given sooon. Tnx a lot.....
    #Sinivas

    Hi,
    Yes But you can use ADOBE FORMS for that... Check this link for presentation...
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0c139d3-3eae-2910-01a1-d253f2587b0e?prtmode=navigate
    Check this BLOG for sending Email through ABAP..
    Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface
    One more thing... You can download your data to a PDF file and send that PDF file via program...
    Search this Forum for more answers.. you would get plenty out of it...
    Check this thread for further information..
    Sending mail with 2 attachments
    Hope this would help you.
    Any queries plz revert back
    Good luck
    Narin

  • Pdf color looks different in preview and acrobat?

    I notice that the colors in various PDF files I have look different in Preview and in Acrobat. Is there some weird color profile issue?
    To be specific, I can create a PDF file in various ways, of a slide deck I originally created using Keynote. It has various different color blocks in the slides. In particular some acid green colors look very different depending on whether I open the PDF in Acrobat or in Preview.
    Preview shows the colors as they were in the original keynote application. But Acrobat shows them far more muted.
    I learned from another post that if I create the PDF by first saving to postscript and then creating the PDF using Acrobat, the issue seems to go away. However this is very inconvenient.
    In short, it seems as though there is some peculiar difference between the way Preview and Keynote (and probably Pages ) handle color and the way Acrobat handles color.
    Is there some way to fix this using some setting in one of the programs?
    By the way, this is not a new problem. I noticed it with previous OS's as well as previous versions of Keynote. I am currently using the latest version of everything.

    Same problem here. I was printing a PDF that my designer had sent me. Before I have always used Acrobat, but I've started using Preview in Leopard since it's faster and more powerful than before. But the colors were seriously wrong, often reversed completely. I believe this file was originally created in Illustrator.

  • Pdf not displayed correctly in preview

    We have a new A) scanner (colortrac Ci40) and when we scan a pdf it is displayed in preview as if it is all wrinkled up.
    Only in prewiew and if imorted in vectorworks. (on both OSX 10.5 and 10.6)
    The same problem appears on a iPad.
    It is not displayed correctly.
    In all other programms I tried it is displayed properly.
    We also have a small a4/a3 scanner from konica minolta and these scans display corectly in preview.
    Is this only a preview problem and should I ignore it?

    Hi there,
    I have a very similar problem: a number of pdf files that I can see perfectly well in Safari/GoogleChrome do NOT show correctly in Preview or ANY iPad app I have (Notability, Adobe, PDF Expertm iAnnotate, Dropbox etc.).
    The problem is that punctuation -- with the expection of periods or bolded text -- does not show properly. For example, commas and quotation marks to not show, and some numbers to not show.
    Moreover, once I have annotated/viewed the problematic file on the IPad and resync to dropbox to view on Mac vis Adobe (which I do with most pdf files with no problems), I get an error message upon reopening the pdf file saying "Cannot extract the embedded font 'FAFWQV+--unknown-2--'. Some characters may not display or print correctly." (the 'quoted' text changes each time). When opening in Preview, no error message appears, though the fole is still lacking punctuation etc.
    Here is a link to one problematic pdf:http://niis.cass.cn/upload/2012/12/d20121201200145301.pdf
    NB: the file is in Mandarin, however I can successfully open/edit/annotate/sync other pdfs using Mandarin font so I'm not sure if the language is related to the problem.
    I would be extremely grateful for some help with this please!
    Thanks!

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • Programming help - how to get the read-only state of PDF file is windows explorer preview is ON?

    Programming help - how to get the read-only state of PDF file is windows explorer preview is ON?
    I'm developing an application where a file is need to be saved as pdf. But, if there is already a pdf file with same name in the specified directory, I wish to overwrite it. And in the overwrite case, read-only files should not be overwritten. If the duplicate(old) file is opened in windows (Win7) explorer preview, it is write protected. So, it should not be overwritten. I tried to get the '
    FILE_ATTRIBUTE_READONLY' using MS API 'GetFileAttributes', but it didn't succeed. How Adobe marks the file as read-only for preview? Do I need to check some other attribute of the file?
    Thanks!

    Divya - I have done it in the past following these documents. Please read it and try it it will work.
    Please read it in the following order since both are a continuation documents for the same purpose (it also contains how to change colors of row dynamically but I didnt do that part I just did the read_only part as your requirement) 
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b?quicklink=index&overridelayout=true
    thanks!
    Jason PV

  • Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?

    Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?

    Here's what I've found on the issue:
    Pantone color definitions have changed (coinciding with CS6) — they are now "Pantone+" (I think that's what they're called). The "+" apparently means they're now LAB colors. Lab colors are not properly displayed in Preview (or in Finder previews) — they display as black (as far as I can tell, in all circumstances). I'm sure it's a tad more complicated than that, but that's the gist.
    Now the bad news — nobody seems to know anything about a fix or workaround (unless you convert your PDFs to process — this might be a fix for sending to clients). It causes issues for me in AI files — being able to view them in the finder (with previews) is a HUGE time saver for my workflow... when they're all black, not so much.
    In my chat with a director of product dev at Adobe, they placed the responsibility to fix on Apple (assuming Apple wants to support Pantone color definitions in their OS).

  • How do I view the ULR of a pdf I have opened in Preview?

    How do I view the ULR of a pdf I have opened in Preview?
    When I google something and find a pdf I want, I open it in Preview. However, when I go to copy the URL of the document to use as a resource in my homework, I can't figure out how to find it. Please help.

    Browsers like Safari and Firefox have a contextual menu to allow you to copy a link to the clipboard.  Point at a link.  Right (contol) click the link to bring up the contextual menu and select the "Copy Link" (or similarly worded - "Copy Link Location" in Firefox, "Copy Link Address" in Chrome) .  Then you can paste the link to wherever you want it.

  • IDcs3 export PDF issues when viewing in Preview

    I appear to be having issues when exporting PDFs from IDcs3. I have drop shadows on text and objects. When i export as a PDF and view it in 'Preview', I get a shadow that extends the area of the object. Drop shadows are not defined, they just have a block blur effect.
    The thing is when I transfer the file over to my MS machine, Acrobat displays the PDF perfectly. Is this a problem with Preview or is it something to do with the export PDF settings.
    Cheers

    Preview is not capable of handling the advance features of exported PDFs.
    Bob

Maybe you are looking for