PDF maker buttons are not allwoing me to save office documents as pdf's

Everytime I click on the Convert to Adobe PDF and email button in Excell, a message that states "Acrobat PDF Maker does not recognize Acrobat PDF Printer" comes up. I have already installed the PDF printer. If I try to print directly from the File Print menu, I am able to create PDF's. How can i fix my Adobe program sot that this button works? Cesar

When you open an Appleworks (previously ClarisWorks) file in Pages (or Numbers) you're creating a new document. If you discard changes, the Pages document will be deleted; the change was the creation of the document.
If you accept the save, you will get the normal dialogue asking for a name and location.
You will then have a Pages document and an AppleWorks document.
There is no further need to open that particular AW file again
It will occur each time you open a AW (CW) file in iWork, once per file unless you discard the changes and then open the same file again.
You could if you wish install AppleWorks 6.2.9 if you can find it. However, once converted to iWork formats the only use for the old AW files is as an archive.
In other words, no you can't get round it, but you only need to do it once per file.

Similar Messages

  • PPT action buttons are not present in pdf file upon conversion

    Hi
    Am using Office 2003 (SP3) and Acrobat 8 (version 8.1.6).
    Have been using action buttons in the presentations for several years, works fine.
    When converting existing files, action buttons in both PPT show and pdf file just works, no problems.
    Newly generated presentations work fine as PPT show. But when converted to pdf file, the action buttons are simply missing.
    Have verified that all action buttons are "at front", same result.
    Have tried to avoid corporate templates by creating a blank presentation and building a small and simple navigating presentation. Again, works fine as PPT show. And again, upon conversion there are no action buttons present in the pdf file.Corporate changes thereby should be ruled out.
    Have checked all settings (including "Adobe PDF, Change Conversion Settings") between a working and a non-working PPT file, can't identify any differences.
    A colleague helped out (using Acrobat 6), same result. But upon activation of "Adobe PDF, Change Conversion Settings, Restore Defaults", the action buttons worked for him. Tried it with Adobe 8, no such luck.
    Have trialed the "Prep 4 PDF" tool, then the PDF file is complete and the "go to slide" keys appear and work again.
    All new updates available are installed, anyone experienced the same and found a fix for this trouble?

    Have tried both ways, same result.
    When working with new presentations, the pdf file is viewable, but the action buttons are not present.
    When working with past presentations, the action buttons are present and do work as expected.

  • HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active.  How do I fix that?

    When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not.  I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Address/Location bar, forward-back buttons are not shown

    Address/Location bar, forward-back buttons are not shown in my browser. How can I make them visible?

    If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear
    * Make sure that the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    * If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
    * If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
    * If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
    See also:
    * http://kb.mozillazine.org/Toolbar_customization

  • When minimizing firefox to smaller size, [maximize,minimize,close] buttons are not visible.

    Is it a bug? [Alt-space-x can maximize the window] but why the buttons are not visible?

    I was able to reproduce the problem on [http://nightly.mozilla.org/ Nightly] so I went ahead and filed [https://bugzilla.mozilla.org/show_bug.cgi?id=761594 bug 761594].
    Thanks on reporting this and helping make Firefox better =)

  • BSP CRM Sales order buttons are not responding

    Is there any body who already implemented sap crm. I've done this but apparently the buttons are not responding.
    is there anybody who can help me.
    Thanks in advance.

    Geert,
    I am having the same issue. I think this is because of a javascript error. In the crm_bsp_frame application, there are two main.js files and one of which is the good one. I am thinking( and please make sure with SAP before trying anything), that one file needs to be removed. Please enable javascript debugging in your browser and try calling.
    Thanks
    Raj

  • HT201401 my iphone's sleep wake and home buttons are not woking

    my iphone's sleep wake and home buttons are not working

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Action Buttons are not getting displayed in UWL

    Hi Experts,
    I am facing some issues in UWL action buttons and I need your help in resolving this.
    When a request is generated in ECC systems, a notification is generated in ECC as well as portal.
    In ECC, we can see two buttons in the notification, "Complete" and "Cancel work item in Inbox".
    But in portal, these two buttons are not visible in the notifications.
    Please let me know how to bring these action buttons in UWL portal.
    Thanks a lot,

    First of all, please see SAP Note 1133821 - UWL Destination Service Configuration and create the RFC destination as explained in the note.
    The procedure is also explained in the wiki:
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=102793389
    Thanks,
    Shanti

  • Once I add my .swf to Dreamweaver, the buttons are not clickable, how can I fix this?

    Hello there,
    I'd just like to start out by saying that this is the first time I have posted on these forums, so if I have done anything wrong, I apologize!
    Anyway, about my question, just like the title says, once I import the .swf into Dreamweaver the buttons are not clickable, however when tested outside of Dreamweaver, they work correctly.
    Basically I have an animated banner with some audio and two buttons, the buttons mute and unmute the music.
    The file consists of two layers, one of which has 2 keyframes, the first keyframe has the Audio with the settings; "Effect: None. Sync: Start, Loop" and a button leading to the next frame.
    The next keyframe (still on layer one) has much of the same but the Audio settings are different; "Effect: None. Sync: Stop, repeat x 1" and this will stop the music.
    Now on the other layer (Rocket) I have a movie clip of a space-themed background and a rocket flying across it, the movie clip is made up of a motion tween and another movie clip which is the rocket.
    I am using Flash CS6 and Dreamweaver CS6 on a Windows 7 computer. I am also using Actionscript 2.0
    I apologize for the amount of information and I'm not very briliant at explaining things, so here are some images of the flash file, hopefully they'll help;
    Layer setup - http://i.imgur.com/iZHwfAw.jpg
    The movie clip - http://i.imgur.com/ayvPJUZ.jpg
    Keyframe one sound settings - http://i.imgur.com/LWbnQhO.jpg
    Keyframe two sound settings - http://i.imgur.com/7kS9dO2.jpg
    Actionscript for the first button/first keyframe - http://i.imgur.com/x6ROqPv.jpg   - (The second button/keyframe has the same code, but obviously the instance name and frame number has been changed)
    Again, I apologise if this all seems confusing!
    Thanks in advance for any answers to this question
    Adam.

    If you did not create this swf yourself then you won't be able to do what I am suggesting.  If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output.  That will create an html page that embeds the Flash file.  Test that file in your browser and see if it plays properly.  IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
    Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

  • File Upload Action Button are not working

    Hi  ,
    In the File Upload Process when the processor are open change request there are Action Buttons  Approve/Reject ,
    When the CR Processor are Click on either Approve or Reject  these two Action Button are not working (means its not show any activity) , while rest of all action button like save,close check , Run validation  are working ...
    While Processor has authorization to Approve/Reject that CR ...

    Hello Nikhilesh
    These buttons are dependent upon the workflow steps. Check that. Check the linkage for workflow. Check SWI6 - CR number and the step. Based on the step you can identify whether the proper step is assigned or not.
    Thanks
    Kiran

  • HT1430 iPhone 4s keypad the "o" and return button are not working - solutions?

    iPhone 4s keypad, the "o" and the return button are not working. Upgraded the software, now the "o" works in the verticle position only, and the return works in the horizontal position only. Help!

    Hi, VRS77. 
    Thank you for visiting Apple Support Communities. 
    I would start with closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps.
    iOS: Force an app to close
    If the issue persists, here are a couple addition troubleshooting steps I could recommend. 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Hope that helps,
    Jason H. 

  • With IE UIX buttons are not displayed correctly

    Hello there,
    We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
    Thanks,

    Hi Andy,
    sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
    it happens with random buttons...
    i haven't seen this problem in mozilla. its quite frequent in IE.
    our customer is very annoyed by this problem :(

  • Buttons are not displayed for the first time when drawImage method is used

    Hi
    In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
    Please help me!
    Thank You

    Hi
    This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
    import java.awt.*;
    import javax.swing.*;
    /*<applet code = MyClass width = 500 height = 500>
    </applet>
    public class MyClass extends JApplet
    Image img;
    JButton b1,b2;
    Container cp;
    Canvas1 cv;
    class Canvas1 extends JPanel
    public void paint(Graphics g)
    super.paint(g);
    g.setColor(Color.black);
    g.fillRect(0,0,500,500);
    img = getImage(getCodeBase(),"image1.jpeg");
    g.drawImage(img,20,20,this);
    public void start()
    cv = new Canvas1();
    cv.setBounds(0,0,500,500);
    cp.add(cv);
    public void init()
    setLayout(null);
    cp = getContentPane();
    b1 = new JButton("Button1");
    b1.setBounds(1,1,100,30);
    cp.add(b1);
    b2 = new JButton("Button2");
    b2.setBounds(200,1,100,30);
    cp.add(b2);
    It would be very helpful to me if you could fix the problem.
    Thank You.

  • On firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

    Question
    on firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

    Top of Firefox window non-responsive, toolbars non responsive -- also see [http://kb.mozillazine.org/Problematic_extensions Problematic extensions]
    *caused by Yahoo Toolbar -- https://support.mozilla.com/questions/890908
    *caused by Babylon Toolbar -- https://support.mozilla.com/questions/890670

  • HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

    I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

    Razmee,
    Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
    When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
    So just now, I reset it and the outgoing email was sent!
    Thanks to you and this forum, it's a great ending to a few frustrating days.
    I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

Maybe you are looking for