PDF not opening in chrome IIS 8.5, windows server 2012 R2
Hi,
I am facing problem in opening pdf using chrome. problem is not will all pdf files but some of them.
Chrome default pdf viewer plugin is enable, but not loading/downloading pdf. if i disable default pdf viewer and enable adobe pdf viewer, pdf opens up.
i googled the problem found same problem in IIS 7.5 http://support.microsoft.com/default.aspx?scid=kb;EN-US;979543.
what could be the possible solution?
Thanks
Any help will be much appreciated.
This does not seem to be a Windows Server core issue, as you would not be running Chrome on Server core. Chrome requires a GUI. This is a Server Core forum.
You might be better served taking this query to a forum dedicated to Chrome.
.:|:.:|:. tim
Similar Messages
-
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes) -
Not able to inistall Sharepoint 2013 on windows server 2012 r2
Hi ,
I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer.
As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
SQL Server 2008 R2 SP1 Native
Client
Microsoft
WCF Data Services 5.0
Microsoft Information Protection
and Control Client (MSIPC)
Microsoft Sync Framework Runtime
v1.0 SP1 (x64)
Windows
Identity Extensions
Windows
Identity Foundation (KB974405)
Windows
Server AppFabric
CU
1 for AppFabric 1.1 (KB2671763)
All got installed correctly on server validated from control panel then i restarted the server and Ran SharePoint Set up
But still facing issue attached in form of image
Please help me on this.
kirteshHi kirtesh,
According to your description, my understanding is that you got an error when you ran prerequisite installer.
Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
i. Application Server
ii. File Services
iii. Web Server (IIS)
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Not able to install studio + controller on windows server 2012 r2
Hi,
i have installed windows server 2012 R2, now i want to install windows HCK 2.1 with controller + studio option but i am not able to install because that option is grey. what additional settings i have to do in order to successfully installation
of WHCK. please guide me.
ankur dubeyHi, see the
Windows HCK Getting Started.
Note:
Controller isn't supported on Windows Server 2003, Windows Server 2008, Windows Vista®, Windows XP, or Windows 2000.
Controller isn't supported on an installation that has already been set up as a domain controller.
Controller isn't supported in a virtual PC or any third-party Hypervisor environment.
Greetings
Nino
...esistono i motori di ricerca, facci un salto e troverai molte delle risposte che ti darò io. -
Adobe LiveCycle Forms not opening in Chrome.
Adobe LiveCycle Forms not opening in Chrome.
Today, I noticed that if the PDF from is opened from Chrome when it is rendered from an IIS server using the following methoed:
Response.ContentType = "application/vnd.adobe.xdp+xml"
Response.WriteFile(""...file-path-name...")
Just Yesterday morning it was working fine.
If I open the PDF over a direct link to the PDF file, it will open fine.
I reported this problem from Chrome using "Report Issue". I hope someone can help me to solve this problem.
Note: I have disabled the built-in PDF Viewer, and Enabled the Aodbe Reader Plugin in Chrome long time ago. I also reset the Chrome Browser, and still not working
Tarek.UPDATE:
This is a reported issue in latest Chrome Update:
https://code.google.com/p/chromium/issues/detail?id=333449
This is an update to give more details.
Following is the environment I use:
Chrome Version (type about:version into your omnibox): 32.0.1700.76
Adobe Reader: XI
Adobe Acrobat 9.5
Operating System (Windows 7/8/Vista/XP, Mac, Linux, Android, iOS): Windows 7
Extensions (type Chrome:extensions into your omnibox): SnappySnippet 0.4
- Adobe Reader Plugin is enabled.
- Native PDF Viewer is disabled.
- All other extensions are disabled.
Note: I am rewriting the problem discription to clarify.
Few days ago, I noticed that if the PDF form will not be rendered properly, if it is opened from Chrome over ASP.NET Website, and when it will be rendered from an IIS server using the following method:
Response.ContentType = "application/vnd.adobe.xdp+xml"
Response.WriteFile("...file-path-name...")
I am 100% sure it was working fine before. Also, it is working fine from IE 10 and Latest FireFox version.
If I open the PDF over a direct link to the PDF file, it will open fine.
Note: I have disabled the built-in PDF Viewer, and Enabled the Adobe Reader Plugin in Chrome long time ago. I also reset the Chrome Browser, and still not working.
When I navigate to the link using Chrome to render the PDF Form, I can see that Adobe is trying to open the PDF Form, and then I get a black Window.
Sometimes the PDF form will open in the following cases:
1. After waiting for several minutes
2. When I detach the browser tab from main browser window
3. When I resize the Window or Minimize/Maximize it
I have no problem whatsoever when I use IE or FireFox.
See attached snapshots for more details.
Appreciate your help.
Tarek. -
Why will PDF not open from email?
I recently modified my Adobe Reader 9.1 (with instructions from the bank) to be able to electronically sign documents.
Since then I can not open any PDF documents from email. I went back and reversed the changes I made. I uninstalled Adobe and reinstalled it. No luck.
I have to save the documents and open them from Windows Explorer.
Any Ideas?A fast workaround for PDF problem (See my original post)
In Firefox:
Open Tools > Options > Under Main tab click Save files to > click Browse
Scroll up or down to find where you want it to go (I put mine under Documents because it's the easiest to find).
Click New folder and label it something you will quickly recognize.
Now when you click on a PDF attachment it will automatically be sent to that file and you can double click or open
it in Adobe Reader
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(Note) If I use Internet Explorer (I have not used IE in years) I can open PDF's from Hotmail with out a problem.
I like Firefox better so I will continue to use the quick workaround until somebody finds a fix.
If you use IE, here are the instructions for saving PDF files.
Click
to open Windows Mail.
Open a message that contains an attachment by double-clicking it
in the message list.
In the message window, click the File menu,
and then click Save Attachments.
Select the folder where you want to save the attachments.
By default,
Windows Mail saves attachments in your
Documents folder. If you want to save the attachments to a different folder,
click Browse, and then select a folder.
Select the attachments that you want to save, and then click Save.
Date: Thu, 3 Sep 2009 08:45:23 -0600
From: [email protected]
To: [email protected]
Subject: Why will PDF not open from email?
How are you guys working your way around the issue for now?
> -
Not able to install IIS on Windows Server 2012
I am unable to install IIS on Windows Server 2012. I get the error as shown in the below screenshot. Error code is 0x800f0922. I did RestoreHealth but that has not helped. Any help will be appreciated.
Hi Yogesh,
Just last week was installing IIS on W12R2 server and got stuck and found easy way of installing this as follow.
when you start installing IIS and at the last step as i marked on red square confirmation. there you find
export configuration settings..go to and export it to C drive and open Powershell by right clicking as open as administrator and run this from Powershell and it will install successfully.
Please let me know if you are facing any issue, since this way it has to work.
OR if you it already worked let me know or mark as correct.
Regards
Raj Navalgund
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage. -
my itunes will not open! is giving me error7(windows error 1114) RUNING TIME ERROR, PROGRAM FILES\ITUNESHELPER.EXE R6034 An application has made an attempt to load the C runtime library incorrectly. I must contact the application support team for imformation and i tried downloading itunes like 10 times and is saying the same thing. Please help! i need to sync my ipads and ipods thank you!
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086
-
DART: Could not open file c:\datafile.txt on application server
We are running data extracts on DART (t-code FTW1A).
However we get error:
Could not open file c:\datafile.txt on application server ####.
We verified that c:\datafile is existing and accessible.
Please help tell why? Pints guaranteed. Thanks!Hi,
Are you able to see the file from AL11 or using report RSWATCH0. Also please check below thread it may help you.
File not created in application server
Thanks,
Sushil -
Services.msc window not opening in Windows Server 2012
Hi,
I have installed Windows Server 2012 on my laptop, when I am typing services.msc in run, the services management window opens and closes immediately and no logs in event viewer.
Same thing happens with Task Manager. I am not able to diagnose this issue.
Kindly suggest.
Ankur SethDid you ever find a fix to this issue?
-
Error: Could not open key: UNKNOWN\Components in Windows Server 2012 R2
Hi,
I am trying to install an MSI where i am getting the below error
..\MSI\CHIP_MAPS.msi: Could not open key: UNKNOWN\Components\F5C1BE1268054884D9261E148691452A\34DBF3FA04D67B443A8EE069E02E418B. Verify that you have sufficient access to that key, or contact your support personnel.
I was able to fix this in Windows Server 2008 R2 . With ine instructions provided here
http://www.okino.com/conv/changing_windows_registry_permissions.htm
However In Windows Server 2012 or R2 i followed the below steps.
1. Regedit
2.
Navigate to the following parent container:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components
3. Replace all child object permissions with inheritable permissions from this object in permissions tab
4. I don't find the owner tab
Please help me asap
Thanks
Sreeramthen add the user name as new owner
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
I use to have a cc membership which I discontinued and I reinstalled cs6 and now I can not open cs6 without the renew subscription window poping up. How can I still use cs6?
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan MuthuramanHi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows Server 2012 - Printing using UNC path not working
Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario. -
SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification
I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.
Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered
Maybe you are looking for
-
On my laptop i had itunes but recently i needed to delete everything on my laptop including itunes. When i went to update the music on my iphone i re downloaded itunes but when i plug in my iphone a message pops up saying my phone is connected to ano
-
How to find the reporting for work center machine wise
hi gurus My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for th
-
Airport is not able to connect to Dlink G604T wireless
I'm experiencing this bug: Airport is able to recognize an open wireless connection provided by G604T dlink router. So Airport try to connect (no pwd are required, the wireless isn't encrypted). The error is due to timeout connection (as showed by SL
-
Running localized versions of After Effects CS4 in English
I just added some details on my blog about how to switch After Effects CS4 between another language and English.
-
How to know what are the privs for one custom schema?
how to know what are the privs for one custom schema? please suggest me......