PDF of InDesign doc displays form elements list when opened
Saw a thread on this with no answers in the Windows InDesign. I have a file with interactive elements (navigation buttons). When some people open the file in a web browser the top of the page displays a warning message that there are form elements in the document. Is there an easy way to turn these warnings off? I didn't add any form items. Just made some graphics have button actions.
Saw a thread on this with no answers in the Windows InDesign. I have a file with interactive elements (navigation buttons). When some people open the file in a web browser the top of the page displays a warning message that there are form elements in the document. Is there an easy way to turn these warnings off? I didn't add any form items. Just made some graphics have button actions.
Similar Messages
-
Just purchased Photoshop Elements 12, When opening Editor -- "Editor has stopped working" Any solutions?
i have same problem too i do all instructions that says before, make new ADMIN then reinstall ps element 12 then it works but few days later stops again
-
Premiere Pro & Premiere Elements Crash When Open Together?
Anyone have a problem with Premiere Pro & Premiere Elements crashing when open together?
I have PE10 and am doing a trial of Premiere Pro CS6.
Both crash fairly quickly when open together.
i7 2600K
Windows 7 64 Bit
16GB RAM
GTX 470
Corsair AT 850 Watt PSU
Thanks!The first thiing that comes to my mind is a resources issue. As you have a stout computer, with more than adequate RAM, unless something is failing (like a stick of RAM), or perhaps the GPU, I would not expect to see what you observe. On a much less powerful machine, I have no problem running PrPro, Encore, Photoshop, Illustrator, and a word processor, all at the same time.
I would look into this ARTICLE, which starts with some general tips on setting up one's computer for running PrE, and then goes into system and OS tune-up tips (this is probably where I would start, if the intitial checklist looks OK), and then goes into troubleshooting. I would definitely look here, and especially using Event Viewer to try and track down what is happening, when the crashes occur, and also the one on tools to test RAM, GPU's, etc.).
Good luck,
Hunt -
Opening a list item pdf attachment from the display form in a new window
I have a list setup in which attachments are enabled.
Users attach pdf's to list items.
When they go into the display form for a list item and click on a pdf attachment in the "Attachments" area at the bottom of the form, it opens in the same browser window.
I would like to amend this so it opens in a new window. Has anyone found a fix for this?
Thanks in advance,
MarkHi ,
Put the code below in your DispForm.aspx page .The you can open the attachments in a new window. Including all the other links on the DispForm.aspx page .
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script>
<script type="text/javascript">
$(function(){
$('a').click(function(){
window.open(this.href);
return false;
});</script>
Thanks,
Entan Ming -
Display full autosuggest list when field gets focus
I've searched through the the Spry topics but did not find a
solution to my question.
How does one make the Spry autosuggest drop down to
automatically display with an unfiltered list when the associated
text field gets focus? The best I can tell this option isn't a
normal part of the Spry autosuggest widget and would require a
custom tweak.
I'd also like to put in a suggestion that this ability be a
built in option for the autosuggest widget.AFAIK, there isn't a way to do that in a PDF form.
-
I been having problem with PDF files clients sent to our agents.
When the pdf is high-lighted in Outlook it will open in preview mode and shows all the data correctly.
When it is opened in Acrobat 9 Pro, the data is missing. This is true even when I used the Export Data function, the xml shows as empty.
Anyone know what is the cause of this issue? or how to fix it?
Here is what the Form looks like when "Previewed" in Outlook. It shows that data are entered
Here is the actual PDF file
http://cid-217d3e6d42015c53.office.live.com/self.aspx/Shared%20Files/SamplePDF.pdfI am currently following up with the client to figure out what they are using that is causing this problem.
There however is no chance the wrong file is e-mailed however. Since the data is visible when previewing the attachment in Email.
I have no idea why the data associated with the file is readable by whatever preview mechanism Outlook 2010 uses, but somehow inaccessible to Acrobat Reader/Pro.
I am not sure if it is the Mac Preview program issue, but I do not believe they are using Macs. I will post the information as soon as I receive it. -
How to set input ready query to display mode as default when open workbook?
Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a millionin Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save -
Display a default subsequence when openning a sequence file in the TestStand editor
Is there a way to set the default sequence displayed when openning up a sequence file?
Seems that the steps for MainSequence are typically displayed first when openning an existing sequence.
How do I set it to display another subsequence I created when I open the sequence file.
Or if it is displaying a subsequence other than MainSequence, how do I set it back to display MainSequence by default when reopenning the file in TestStand.
Solved!
Go to Solution.Jeff,
Sequences are stored in sequence files in 0-N order. The default sequence will be the 0th one. To change the order in the sequence editor you can click on the Sequence bar above the sequences. Keep clicking until there are no arrows on it. This is the true order of sequences in the sequence file. Drag the one you want visible to the top.
See the image so you know what I'm talking about.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
SequenceBar.jpg 23 KB -
Email interactive pdf from webdynpro without displaying form
Hi all,
We have a webdynpro application that needs to generate an interactive form and send it by email, without first displaying it to the user. I have built the interactive form in a webdynpro component and it works fine, but I think it requires the window to be opened to generate the pdf xstring to be attached to the email. But we do not need the window to be opened because the users don't want to review the form before sending it. (whether this is a good idea or not is not up for discussion. )
I am wondering if there is a better way to accomplish this? More detail on scenario: the user selects some data in the screen and then clicks a button like "send form". They fill out a popup with recipient info and then click "send". A form based on the data they originally selected should be sent to the recipient. The recipient (who does not have access to SAP) fills out some fields in the form (hence it needs to be interactive), then sends the completed form back to the originator via email.
Thanks for any suggestions!
MargaretThanks to all for your responses. I could have stated the problem more succinctly as: how to send a form with ZCI layout (not standard layout) via email?
The pointers you gave are helpful and probably would have gotten us to the solution. We found we could use the normal functions, "CALL FUNCTION 'FP_FUNCTION_MODULE_NAME' ...." and then
CALL FUNCTION funcname
EXPORTING
/1bcdwb/docparams = fp_docparams
/1bcdwb/docxml = docxml
where docxml is the output of a custom transformation we built to convert a deep ABAP structure to the correct XML format. (Note that "CALL TRANSFORMATION id ..." does not work correctly for converting deep structures for ABAP forms because the id transformation inserts <item> where <DATA> is needed.) -
Exporting Pdf in InDesign - Doc Size Changes
I'm trying to save a file as a pdf doc in InDesign. I've done this a million times with no issues, but I must have changed something in the way InDesign now save. The document I made is 24" x 28". The document size after I save is 28" x 32"??? I don't have marks and bleeds checked, so I'm not sure why it's saving larger?
Thank you for your help!Do you have bleeds or slugs enabled?
How are you determining the size of the PDF? -
IChat does't display buddy list when opened & shuts down when opening prefs
I just did the software update and like some other people am having some problems. When I open iChat, the buddy list doesn't come up and I didn't see anything in the menu bars to open it. Also, when I open preferences the program just shuts down before prefs opens. Please help me out if you know how to fix it! Thanks
Go to Users/(your account)/Library/Preferences and delete com.apple.ichat.plist.
Restart iChat. -
Delete Windows Live ID from list when opening office document on Skydrive
I have office documents that are on Skydrive and when I open them the Sign-In form has some old account in the list. Is there a way to delete these other accounts?
ThanksHi Glenn,
There is a little cross in the top right corner of the Sign-In form when you move you mouse on it. Click it remove the certain account from the list.
Sincerely,
Max Meng
Come back and mark the replies as answers if they help and unmark them if they provide no help.
There is no cross. The title of the form is "Connecting to ...live.net". Inside the form I laid out below (I tried to copy the form but it did not work).
Enter your Windows Live ID credentials
Email Address: [drop down box\
Password: [text box]
[check box] Sign me in automaticly
[OK button] [Cancel button]
Windows live ID
[hyperlink Sign up] [hyperlink
Help]
The only other item is Red X to close the form. -
Photos do not open in Photoshop Elements 10 when opened from Photoshop Lightroom 3
I am trying to edit photos using the external editor option in Photoshop Lightroom 3, using Photoshop Elements 10 as the external editor.
I installed Photoshop Elements 10 about the 13th May 2012.
Photoshop Elements loads correctly but the photos do not open. I have followed the help video to make sure that I have set it up correctly.
This was working with Photoshop Elements 8.
I am using an iMac 21.5" with Snow Leopard.The odds are you chose the logical file rather than the correct file as your external editor:
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-external-edito r/ -
Forms builder crashes when opening any pll
Hi,
I have gotten this problem that my forms builder crashes immediately when I try to open any pll file. (There is nothing wrong with the pll file - my colleagues can open these files with no problems on their computers). It crashes before the pll file is even remotely loaded - almost as if it encounters an error during the parsing of the pll file.
I have no problem opening and editing fmb files in my forms builder.
This problem has not always existed but it came all of a sudden one day and since its been impossible for me to open a pll file and its getting annoying :P
I run:
- Windows XP SP3
- Forms builder version info :
Forms [32 Bit] Version 6.0.8.26.0 (Production)
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Oracle Toolkit Version 6.0.8.25.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.25.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
I tried deleting everything under D:\ORA6i where its installed and then reinstalling it - but the problem is still there.
Does anyone have an idea about what could be wrong - because I am clueless atm. - could it be some registry settings that somehow got changed maybe ?
Edited by: [email protected] on Sep 3, 2008 5:06 AMI have encountered various issues like this with Forms 6i over time and have tried numerous things to fix them - including complete uninstall of all Oracle products and reinstalls and the one thing I found to work best was to run a Registry Cleanup tool. I had the best success with Microsoft's RegClean.exe tool (originally released as a PowerTool), but it is getting harder to find now that Microsoft has desupported it and pulled it from their web site. There are a few places where you can still get it; www.cnet.com, www.zdnet.com, and www.majorgeeks.com just to name a few. Other Registry Tools will probably work fine as well, but this is the one I have history with. I did not have 100% success by cleaning the registry, but 50 to 75% of the time it fixed the issue without having to uninstall and reinstall Oracle Forms.
Disclaimer: Please exercise caution when doing anything with the Windows Registry. The smallest change could have serious effects. Always backup the registry or create a restore point with System Restore before you make any changes to the Registry!
Hope this helps.
Craig...
If my response or someone else's response answers your question - please mark your question answered. Thanks. -
Form bad value when opening CFL in system forms
Hi,
I have a UDF control on the Stock Transfer Form which opens a CFL. Now at the CFL event, when i try to set the value from the CFL to the Parent Form (Stock Transfer). It opens the CFL again with "Form - Bad Value" error.
This case i had faced but the problem was solved using
dbdatasource.setValue = "string value returnd frm CFL datatable"
but my problem comes with system form where i cannot use Setvalue method of DBDataSource.
Please Help!
Manu.Hi Trinidad,
thanx for replying.
my code is
Select pVal.BeforeAction
Case False
Select Case pVal.EventType
Case SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST:
''' sCFL_Value1 is a string'''
sCFL_Value1 = oCFLEvent.SelectedObjects.GetValue(1, 0).ToString()
If oCFLEvent.ItemUID = "47" Or oCFLEvent.ItemUID = "3" Then
oEditText = oForm.Items.Item("etTest").Specific
<b>oEditText.Value = sCFL_Value1</b>
'''''' ******This is where i get the error i have tried using oEditText.String as well. I faced the same issue on a user form but when i used oDataSrc_Header.SetValue("U_Price", oDataSrc_Header.Offset, sCFL_Value1), my problem was solved.*********''''''''
End If
i tried a workaround by saving the sCFL_Value into some other textbox which is not bound with a CFL control (e.g. the remarks field in stock transfer), there it does not throw any error but still as soon as i copy that value from remarks field to the actual control it throws "bad value error".
Any help would be very grateful.
Manu.
Maybe you are looking for
-
A/R Down Payment Request and Cash Flow
Hi All, is there a way to present down payment requests in standard cash flow reports? Thanks in advance, Vangelis Kanellopoulos
-
Mail No Longer Working On WiFi
Just discovered a very strange issue. My e-mail accounts no longer send or receive on WiFi. This happens at both at home, and at work. Mail still works fine on Edge and 3G, but not WiFi. I can still access the internet via WiFi, so I'm really confuse
-
"disk cannot be read from or written to" -- help, please.
this started in perhaps the last week or so - i tried updating my mini and it took ages. so i decided i would restore it instead, and as it was doing so, a message popped up and told me that the restore process could not take place because the "disk
-
I have attempted to convert a document that is on A4 size paper from, a JPEG.TIFF.PDF.OPD in order to put it into a word document to input into my translation software. The software that I have to use will only accept the document in a word format,an
-
Creating tabs in Appraisals Overview Page(ESS/MSS) -Status Overview
Hi, We have two types of Appraisal documents in system. One is normal Appraisal document and another is Talent Competency Assessment document. We are thinking to keep these two appraisal documents apart and away from each other. By creating the two S