PDF of Project File adds lines to the bottom

When doing a PDF of a Microsoft 2007 project file, the PDF version has a bunch of lines added to the bottom. When printing the project file to a printer, these lines do not show up at all. I have tried it both in Std and Pro with the same results. Something is happening during the conversion process to add these lines. All software has been updated to the latest updates and is being run on a XP SP3 machine. Attached is a view of the completed PDF file. When looking at the file, it is the lower half with all of the horizontal blue lines. I apologize I cannot post the whole image due to the data contained.
Thanks.
Software Used:
Microsoft Project 2007 Standard
Acrobat 9.1.2 Standard
Acrobot 9 Pro
XP Pro SP3

iMovie has only one video track. However you can get a Picture in Picture plugin here:
http://mac.softpedia.com/get/Video/iMovie-Picture-in-Picture-Plugin.shtml

Similar Messages

  • Printing in Acrobat X gives an extra unwanted line in the bottom margin

    Printing in Acrobat Reader X gives an extra unwanted line in the bottom margin. This margin should normally be blank. The line pattern follows the pattern of the print inside the margins. How can I print without this extra line?. The problem does not occur with the same documents opened in Acrobat Reader 9.4.

    I had the same problem when I created my pdf for my Realtor flyer using microsoft publisher. I was able to get rid of the unwated line by using a png file in the publisher before generating the pdf.

  • Printing in Acrobat Reader X gives an extra unwanted line in the bottom margin

    Printing in Acrobat Reader X gives an extra unwanted line in the bottom margin. This margin should normally be blank. The line pattern follows the pattern of the print inside the margins. How can I print without this extra line?. The problem does not occur with the same documents opened in Acrobat Reader 9.4.

    I had the same problem when I created my pdf for my Realtor flyer using microsoft publisher. I was able to get rid of the unwated line by using a png file in the publisher before generating the pdf.

  • I format a cell with a double line at the bottom and it appears until I move to another cell and the formatting is lost.

    In Numbers, I format a cell with a double line at the bottom and it appears until I clik on another cell and then it disappears.

    When you describe the "double" line are you talking about something like this?
    If so this is only selecting an edge of a cell.  You still have to select:
    1) Line style using the menu to the right of the one I have circled (currently  "Thin")
    2) Line width using the menu to the right of the previous one and, finally,
    3) the line color using the menu to the right of the previous one
    Even so I have not found a way to copy cell border formatting so I ALWAYS wait until the very end to add border formatting.

  • Thin green line at the bottom of my QT exports from FCP

    Hello,
    I have exported a series of QT vids from FCP. Each QT video file exhibits a thin (2 px)green line at the bottom of the player window. I can't seem to narrow down what is making this line appear. Can you please offer some suggestions? Remedies?
    Thanks so much in advance.
    Utilizing:
    Quicktime Conversion
    optimized for broadband Large
    H.264 codec for HD footage
    Custom 660x377 frame size (varied to see if that would fix the issue, did not)

    So you only see it in QT Fullscreen mode?
    The reason I'm pressing this is that I've seen green lines LIKE this with issues resulting from what seems like a very hot video card.
    Usually they 1) aren't that crisp and 2) don't always show up each time you view it.
    And this is AFTER compression, yes? For sure this isn't on the original material? Make sure you set your canvas in FCP to 100% size to see all of the lines.
    CaptM

  • I am getting a weird green line at the bottom of my screen...

    I am trying to burn a DVD in iDVD.
    I keep getting a green line at the bottom of the screen. I tried "squaring" the pixels before outputting the project, but I didn't render the project this way in FCP before trying that.
    Could that be the problem?
    I also tried buring at 1x.
    Any help would help!
    Thank you,
    Evan Jacobs

    Well to answer the questions. This artifact is in fact a physical one because you can see it when you boot the Mac and sign in with a different profile. I decided to test my luck at the local Apple Store just to see what they said. They looked at the display for about 3 minutes and then said that it would be nearly 700 bucks for parts and labor to basically put a new display on my laptop. He said that since its a TFT screen chances are on of the layers within the screen are messed up hence I see this black line. I decided Im going to look elsewhere and see if I can't find a solution here. If worse comes to worse, then I'll live with it till the Pro Book is out and get that with Apple care.

  • How do I remove a small line at the bottom of the page?

    Hello!
    I'm formatting some work for a client and I can't seem to find out how to remove this line at the bottom of the screen. It's on every page. It's not a line that was drawn in because I can't click to remove it. Has anyone seen this before?
    Thanks,
    KHILL

    Post a screen shot so we know what you are talking about.
    Does it print, or is it just on the screen?
    Jerry

  • Help with a weird little blue line in the bottom right corner of my lightbox gallery?

    I get a weird little blue line in the bottom right corner of my lightbox gallery when viewing in Safari and Chrome.  Its not there when looking in Dreamweaver or Firefox.  I'm going crazy!  Can anyone help?

    I have added to following code to sample_lightbox_layout.css
    .lbGallery a {
                    text-decoration: none;
    That fixes the dash, which is an underline. The default style for a link is an underline and since it was not defined the tag gets the default style for the underline.
    Good luck.

  • Why do i have a grey thick horizontal line on the bottom of my screen imac

    hello
         I been having a problem with my iMac 21.5 inch mid 2011 since this monday January 7,2014. Theres a grey and some times black thick horizontal line at the bottom of the screen, I cant see my programs at the bottom of the screen. First its black then turns into grey and it starts flickering and then it stops flickering and it wont go unless I turn off my mac or put it to sleep, and then like an hour it comes back again. please could you help me Thank you.

    Hello Armando
    Check out the article below for troubleshooting your issue with the display. There are a few things that can be done, like changing the resolution of the display and also to reset the NVRAM to see if that resolves that for you.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    -Norm G.

  • Well, in two weeks I have gone through 2 mini's.   The first had a 1 inch wide shaded zone top to bottom.  Apple replaced it .  Now, the replacement has started with white flickering lines at the bottom. anyone else exper. probs?

    The Ipad mini replacement (the first had a 1 inch shaded band running down it - and Apple replaced it.  Now my new one has a flickering set of lines at the bottom of the screen.  I reset adn reloaded, powered it down and up and still there.  Seems likely to be a hardware issue - just wondering if anyone else has experienced this.   Nothing unusual - havre Mac Airbook, two other older ipads and iphone and all are fine - no issues charging or such.

    You must be at the end of the bell shaped curve for device problems.  There's always someone who experiences this, and unfortuantely you are the rare user to be annointed by the gods of bad luck.
    I read many Apple forums, and your story is indeed rare.  Just like the person who wins the lotto, there are those who play all their lives and never win anything, not even $1.00.  I'm sure you get the picture.  I had a similar experience many decades ago, only with a car (or cars).  Not fun and not funny.

  • My downloaded film has a white line at the bottom

    My download of Guardians of the Galaxy has a white line at the bottom of the film.
    This has also happened with some other rental films recently.
    How do I get rid of the line?

    Hello,
    If it's still under Warranty have Apple look at it.

  • When doing the app exposé gesture, is it normal to see a thin white horizontal line at the bottom of the screen after minimizing a window?

    I noticed that when I open two windoes (say Safari and Trash can) and minimize both windows so they go on the dock, when I do the swip down gesture with 3 fingers (App Expose´) there is a thin white horizontal line at the bottom of the screen. Does it happen to every macbook pro out there?  Is this normal?  Hope it's not a display screen problem...

    You would have to have multiple pages of the app minimized.
    This is what it looks like with Safari with 1 page open and 4 minimized.

  • Purple line at the bottom of the touch smart screen

    I have a purple line at the bottom of my touch smart screen , that is causing the icons to flicker rapidly . How can i resolve this .

    Hello,
    If you restart your system, is that purple line still there? 
    During the boot process into windows, do you still have that same line?
    If you boot into BIOS or into safemode, is that line still there?
    You can try to remove the video card driver and see if that resolves if not, better to try to update the video card driver, but for that, you need to tell me what computer model you have, the exact and entire model.
    Thanks,
    I work for HP! Please remember to provide and if this helped click ON

  • HT201177 I have a horizontal line in the bottom 1/3 of my screen display that I can't get rid of

    I can't seem to get rid of this black horizontal line in the bottom 1/3 of my display its there in all applications and there appears to be a shadow bar behind it? any help would be appreciated

    What model iMac? This forum covers three different variants made before 2006. They have different display technologies.
    Doing "About this Mac" from your Apple menu and posting the info found there for your processor type is a good start. If that shows you have an Intel processor, those iMacs are different enough to have a separate forum here:
    iMac (Intel)

  • Pictures taken with my 1D Mark IV show a blue horizontal line at the bottom from ISO 400 onwards.

    Pictures taken with my 1D Mark IV show a blue horizontal line at the bottom from ISO 400 onwards. So far nobody has been able tot tell me the cause of this problem. The body is still quite new (15000 pics taken).

    I agree that it looks like a column of photosites is not working.  But... I'm curious as to why this would only happen at ISO 400 or above. 
    The sensor is covered with photosites -- they are monochrome.   On top of the photosites is the "bayer mask".  The mask is a checkboard pattern of red, green, and blue "lenses" which makes the photosite beneath only sensitive to that particular color.  They are group in clusters of 4 photosites in a 2x2 matrix.  Two of the four squares (in opposing corners) are green.  One corner is red.  One corner is blue.  If you were to lose a column which happens to be along the red/green column (as opposed to the green/blue) then you'd lose red sensitive and half the green sensitivity in that column.  The result would be that this column is flanked by two "working" columns which are full of green/blue photosites... hence the teal blue look.
    I do not know if this will work for you, but oddly... you can actually sometimes "clear" stuck pixels (but usually this is an indvidiual stuck pixel... not a whole column of them) by putting the camera into manual sensor cleaning mode (and you may have to do this 2 or three times).  While the normal point of the self-cleaning mode is to flip up the reflex mirror and open the shutter so that you can inspect and clean the sensor (really the front-most filter because you can't actually touch the real sensor), it also neutralizes the charge on the sensor (or so I've read).  This charging and discharging of the sensor a few times can often get "stuck" pixels to start working again.  BUT AGAIN... I've only ever seen this used on individual stuck pixels... never a whole row.
    Tim Campbell
    5D II, 5D III, 60Da

Maybe you are looking for