PDF output does not refresh data in BI Publisher, XML and HTML do refresh

I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
OS is Oracle Enterprise Linux.
Any help on this will be very welcome.
Francisco

Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved.

Similar Messages

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

PDF output does not match Frame TOC

My Frame TOC is accurate, the tags are correct. My PDF output has the correct Units in place. However, in the PDF TOC on the left nav, the Unit 5 Lessons appear in Unit 4, the Unit 6 Lessons appear in Unit 5, Unit 6 has no Lessons, Unit 7 is correct. I have spent a full day troubleshooting this. Does anyone have an idea what the problem might be?

Strange things can happen thanks to the PDF setup > Bookmarks tab, though I suspect you have already checked that. I've occasionally shot myself in the foot by using two styles for level 2, for example, and not noticing that one of them had decided to sidle into the .pdf navigation as level 3 …
Counsel of despair, if you have full Acrobat, would be to adjust the bookmarks manually so you can hand over the deliverable. Hope someone will come up with a more convincing answer, though!

Server Socket does not read data input stream

Hi all,
I am very newbie to Java Network programming with sockets and multi-threading.
But I am obliged to develop a chat system written in Applets which can be placed on the website and used by visitors who come to my website.
In order to understand this, I have tested a basic web chat program I downloaded from the Internet which use sockets and multi-threadings. The program work fine, no bugs at all at both compilation and run time. I noticed that all three streams for Client side (i.e. first one is input stream used receiving data from User; the second one is socket input stream used for receiving data from Server socket, and the third is socket output stream used for writing data to server socket) were established. And the same, two socket streams (input & output) for Server side were also connected when running program giving right port number and IP address of the server.
The problem is both server and client sockets do not read data using the following stream classes:
1. DataStreamInput: I use input.readUTF() method
2. or BufferedReader: I use input.readLine() method
The example of the codes are below:
private BufferedReader input = null;
private PrintWriter output = null;
private Socket socket = null;
public void open() throws IOException
{ input = new BufferedReader(new
InputStreamReader(socket.getInputStream()));
System.out.println("Server socket input stream was created, and");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Server socket output stream was created");
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
System.out.println("Server is reading data from Client, wait...");
String fromClient = input.readLine();
System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
The problem is at the line: String fromClient = input.readLine(); in the run() method? What is wrong with the codes above?
Note: I also try to use original codes which use readUTF() method in DataStreamInput class instead using readLine() in BufferedReader. Both methods dont read data from inputstream socket?
I very appreciate any help/advice from experienced developers.
Best regards

Hi,
Yes. The readLine() method hangs! After the test, the execuation of the program is stopped at the line of readLine() method; it does not pass it?
There is no problem with writing to Server socket. After the test, the program pass through flush() method. Here is the code for writing to sever socket within ChatClient (client side socket) class:
private BufferedReader input = null;
private PrintWriter           output = null;
public ChatClient(String serverName, int serverPort)
{ System.out.println("Establishing connection. Please wait ...");
try
{ socket = new Socket(serverName, serverPort);
System.out.println("Connected: " + socket);
start();
catch(UnknownHostException uhe)
{ System.out.println("Host unknown: " + uhe.getMessage()); }
catch(IOException ioe)
{ System.out.println("Unexpected exception: " + ioe.getMessage()); }
public void start() throws IOException
{ input   = new BufferedReader (new
                         InputStreamReader(System.in));
System.out.println("Client User input stream was created,");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Client Socket output stream was established, and");
if (thread == null)
{ client = new ChatClientThread(this, socket);
thread = new Thread(this);
thread.start();
public void run()
     while (thread != null) {
     String fromUser;
          try{
               while((fromUser = input.readLine())!= null)
               System.out.println("Client wasreading a data from User, and");
output.println(fromUser);
     output.flush();
     System.out.println("Client has written a data to Server");
catch(IOException ioe)
{ System.out.println("Sending to server error: " + ioe.getMessage());
stop();
etc.
Here is a piece of codes for reading data from the Client Socket in the ChatServer Class (Server Side socket):
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
{ //server.handle(clientPort, input.readLine());
System.out.println("Server is reading data from Client, wait...");
String fromUser = input.readLine();
//while((fromUser = input.readLine()) != null)
     System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
etc. Please advice why the readLine() method hangs; does not read data from the input stream received from the CLIENT?

Submit MC.9 does not retrieve data in background processing.

Hi,
Im submitting transaction MC.9 in one of my programs. The submit statement seems to retrieve data when the program is run in the foreground, but when the program is scheduled to run in the background the submit statement does not retrieve data.
kindly advise,
regards.
Message was edited by:
sheldon barretto

Hi Tushar,
Thanks for ur reply.
I tried wat you asked to, but no spool was generated for the job. In SM37 it says that the Job (RMCB0300) is completed, but theres no spool list entry.
Does it mean i cant run MC.9 in background.
regards,
Message was edited by:
sheldon barretto

CFGRID does not show data (CF9.0)

Under development server, CFGRID show data , all is fine , correct. (CF9.0 version dev)
Under production server , CFGRID does not show data, only a grey line (like a HR).
How to debug this ?
Thanks,

Kindly check below to troubleshoot this issue:-
Is there any difference between your CF production & developement server setting summary?
Is there any browser script level difference between your both CF server?
Are you getting any relevant logging error in your CF server application.log & exception.log?
Run a very simple cfgrid running app to check, either getting issue with that too or not.

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

AddOnsLocalRegistration.sbo file does not match data in the common datab...

We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
Thanks for any help.

Hi Vaughn.........
I guess you need a re installation of Outlook Integration Addon.
Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
Regards,
Rahul

PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2

Well this is upsetting. I created a PDF form with several pages of the same form (it's a travel log).
My hoping to use Adobe Reader to complete the form and save back as a week at a time won't work.
I created the form using Acrobat Pro 9 from CS5.
Does anyone know if a PDF form in a Portfolio should work with Adobe Reader on the iPad2/
Also, what can I use that works with forms as a portfolio?
Ken

Ken,
please could you describe your workflow. It might help to find some solution. Also it would be great if you can share a sample of your document. Please email it to [email protected] with the reference to this discussion "PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2"
thank you.

Acrobat 7.0 Pro pdf printer does not populate? Error says printer port.

I got a new computer and was installing Creative Suite & Acrobat pro and the Adobe PDF printer does not show up in the Printers. I downloaded the upgrade and Windows says it cannot install.
I am running Windows 7 Pro

Two parts of AA 7 will not install on Win 7 (32 or 64-bit): the Adobe PDF printer and AcroTray.exe. You can install a separate color PS printer (either one from Adobe or possibly one for an HP color PS printer), change the name to Adobe PDF and change the port to FILE. That should do the job, but you will ALWAYS have an extra step in the creation of a PDF. You will have to print to the printer and a PS file will be created (probably with a PRN extension). You then have to open that file in Distiller to create a PDF. From my brief testing, this process will work and the rest of Acrobat and Distiller seem to work (though I did not test extensively). If this is unacceptable to you, then purchase AA XI (upgrade not available from AA 7).

Adobe pdf printer does not appear

I downloaded Adobe Reader 9 to my HP laptop, but the Adobe pdf printer does not appear on the list of available printers. My HP says it has AMD Turion (tm) 64 Mobile Technology ML-34 and Windows XP (Version 2002, Service Pack 2). Can someone tell me how to get the Adobe pdf printer to appear in the list of available printers? Thanks. dmm

Reader is just for the reading pdf files. It does not create pdf files.
For that you need one of the commercial Acrobat products. If you only
need to create 5 or less pdfs, then you can use Acrobat.com.
Mike

Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

PDF Reader does not open

PDF reader does not open on web email, windows media viewer opens.
Any suggestions?

See http://windows.microsoft.com/en-us/windows7/change-the-program-that-opens-a-type-of-file

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

PDF output does not refresh data in BI Publisher, XML and HTML do refresh

Similar Messages

Maybe you are looking for