PDF Page Size does not match Canvas Size

Hello,
I'm using Xcelsius 2008 Engage SP1 on Vista 64bit with Office 2007 installed. When I'm exporting a Xcelsius file to PDF, the resulting Page Size of the PDF file is 8.5in x 11in. However, the Canvas size in Xcelsius is 800x600 (pixels). The resulting PDF file has quite a bit of whitespace in the top and bottom sections of the file.
Is there anyway that I can export to PDF but with a file size that is in the same aspect ratio than the Canvas Size?
Thanks for any input.
Regards,
Jon

We regularly export to PDF and face this issue. I believe that the adjustments need to be made in Acrobat as there is, from my understanding, no way to change the default export in Xcelsius. You are probably already be doing this, but if not ... our solution has been, once you have exported your model into Acrobat, to simply rotate the page before saving the file. At 800 x 600 you may still have some white space at the top and bottom of your model. We typically use an Xcelsius canvas size of 1100 x 850. When exported (and rotated in Acrobat) this gives a nice crisp image that also fills the page. I hope this helps you.

Similar Messages

Annoying 'Could not use the history eraser because the current canvas size does not match that of the history state' message

Does anyone know if it is possible to get rid of the message 'Could not use the history eraser because the current canvas size does not match that of the history state'?. It comes up if I hit the alt/option key while I have the eraser selected. Something I do by accident all the time.

The way you've described it, one gets the distinct impression you do not have a clue as to what the history brush does and how to use it.
You need to read up on it. Read the Help files and google for tutorials.
First you need to create an image (with actual pixels in it), edit it as desired, then make a snapshot of the edited image, then target the snapshot with the history brush tool, then go back in the History panel to the step before your edits and selectively paint your edits in with the History Brush.

Hp pro 8600 error Paper detected does not match paper size or type selected .

hp pro 8600 error "Paper detected does not match paper size or type selected" for Copies from tray one . There has been no change in the paper always used in tray one. Prints documents with no problem from Tray One with same paper. Copies from Tray 2, same paper, no problem. Have restarted the printer, same error. When I try to copy using Tray one, the to be copied document does not feed, and the printer kicks out a blank page using Tray One Paper.

Hello marathonmama,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Mismatch error on the printer.
Please click the following link that deals with an HP Single-Function and Multifunction Printers - 'Paper Mismatch,' or 'Paper Size Mismatch' Error Mes....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Cannot submit widget to Apple Downloads : File size does not match

Hello all,
I made a widget to play Go that I finalized yesterday ( http://lesiteajulien.free.fr ).
Unfortunately, I have not succeeded to uploading it to the Apple widget repository, since the submit page keeps returning the following error :
"The filesize from the file you uploaded and the file that is downloaded from the given download URL do NOT match."
But I am absolutely sure that both zip files are the SAME. I downloaded it from my server a few times and compared the size with the original file I'm sending to Apple: they match. So I guess my server is not the cause.
I tryied from various places and with various browsers.
Did anybody have any similar problem while trying to upload a widget ?
Any idea ?
Thanks for your help.
Julien

tntemerson wrote:
The sales people at the Apple store told me that Time Machine makes a true restorable system picture of the native HDD during backups.
So I'm surprised when the backup runs through to a reported completion but the final backup size does not match the stated estimate for a "full backup" which is the same as the Macintosh HD used space.
Time Machine automatically excludes some things that aren't needed for a full system restore: system work files, most logs & caches, trash, some indexes, etc. So it should be a few GBs less than what's on your system, but of course varies a lot from one Mac to another.
See the tan box in #11 of Time Machine - Frequently Asked Questions for the gory details.

Paper detected does not match paper size or type selected

Says paper mismatch! Paper detected does not match paper size or type selected. I have a 6600. Can some help?

Hi,
Try updating the printer firmware, the latest version should improve its paper handling.
Follow these steps to get the latest update for the printer and then check for any differencex:
http://support.hp.com/us-en/product/HP-Officejet-6600-e-All-in-One-Printer---H711a/H711g/4322968/mod...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Brush preview size does not match brush stroke

The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
Does anyone have a solution for this problem?
*I use a wacom tablet.

Is your system cursor size set to something other than normal?
under Apple, System Preferences, Universal Access.

PhotoSmart3210 All in one "Paper detected does not match paper size or type selected."

All of a sudden i cannot copy any document with my 3210 All In One. I keep getting the message shown above on the screen.

Hi @nunzio317
I would like to help you with your Photosmart 3210. I understand that when you copy you see a message on the printer that says "Paper detected does not match paper size or type selected". Does this also happen when you print from the computer, or only when you copy? Have you tried copying a different size paper, and what size paper are you currently using?
Are you able to print a self test report? If you are unsure, please try, and let me know;
Load plain white paper into the tray.
Press the Setup button.
Press 1 to display the Print Report menu.
Press 1 again to select Self-Test Report. The self-test report prints.
- Source
If this also happens when you print from the computer, please use the following document as it can help you to resolve the issue; 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Final print size does not match screen view.

Hi
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
I welcome any help with this.
Thank you
Joe

If the problem is that the printed image is being scaled larger, this is a very common side effect with borderless mode settings in print drivers. Typically, (though sometimes you can prevent this where alternative borderless options are given) - an extra unrequested scaling % ensures that any physical mis-registration or inaccuracy of the paper size, does not leave any accidental white edges.
That's nothing to do with LR's end of the process, if so.

With color management, color picker current color does not match canvas color

What gives here with color picker in CS3?
RGB doc
using color management/profiles
View>>proof color using my Epson RGB printer profile
create box
double click fill box in palette box to view color picker
pick color from spectrum area
close color picker
want to change color of box
double click fill box to view color picker
NOW current color does not match color on canvas, subtle but vexing color shift. So how can I use current color to pick a new color on the canvas is always different.
here's an in illustration of the problem:
http://docs.google.com/Presentation?id=dfv8h494_18gwqbsjg5

Rob, here's screenshot of Acrobats Output Preview Object Inspector. You can download my PDF here - //www.fileswap.com/dl/Q1CzzOzEqt/
I'm not sure if CM was assigned to document when created or afterwards. In Color Settings preferences is stated Fogra 39 (if it matters - document was meanwhile saved and opened...). Are there other options to assign workspace to exsisting document?
Peter, this is not the case. Placed image has embeded same color profile as is working space of document in ID. I tried the same with sRGB image placed in same ID document and compared it to PS but color shift (greenish) is present - it looks exactly the same.
Guys, I can't tell you how happy I am to have you help me with this terrible and nerve-wracking problem.

Cannot send compressed PDF which is does NOT exceed MAX size?

I am trying to send some PDF's to be opened in IBook which works great, but I keep exceeding the max size which does not reflect the true size of the PDF I am trying to send.
When I try to send a PDF which is 22.1MD, I get a message from the Mail app that says in part:
"Your message has size 30.3MB, which exceeds 28.3MB, the maximum allowed by server:"
The unzipped PDF is 24.7 MB which could not be sent, so I zipped it (22.1 MB) and this will not go either. Perhaps the way to beat this is to break the PDF into two zipped segments but right-clicking on the file does not offer that option. The only choice I see is the 'Compres ...' option.
Any help will be appreciated.

Ok solved the issue. It was rights within the report.
It has been fixed now.
"You need to give the user and the report the schedule rights. One option would be to add another group and call it "Schedule for" then assign the scheduling rights to the group and add the needed users to the group.... Works like a charm."
[http://www.forumtopics.com/busobj/viewtopic.php?t=65458]
taken from the above link.

Data type size does not match values returned

I've tried searching but couldn't find what I was looking for, sorry if this has been answered or is a duplicate.
I am using the (Java) method below to get the column definitions of a table. I am doing this through an ODBC connection (using Oracle ODBC driver) and I have NO CHOICE in the matter.
The problem I am having is that one particular column has a column size is smaller than the size of the data it purportedly holds (ie attendance_code = varchar size 3 but data value is "Absent". I suspect the data is actually a look up to situation, where my attendance_code column has a value of 'ABS' and Oracle goes and fetchs the "Absent" value.
My issue is that the meta data returned from ODBC is the actual column definition (ie varchar(3) and not varchar2(10) for example).
How do I resolve this? I do not have access to all_columns table etc. I have to do it using ODBC metadata only.
TIA.
public ArrayList<SchemaColumn> getColumnsForTable(String catalog,
               String schema,
               String tableName) {
          ArrayList<SchemaColumn> columns = new ArrayList<SchemaColumn>();
          ResultSet rs = null;
          try {
               DatabaseMetaData metaData = connection.getMetaData();
               rs = metaData.getColumns(catalog, schema, tableName, "%");
               SchemaColumn column;
               while (rs.next()) {
                    column = new SchemaColumn();
                    column.setName(rs.getString("COLUMN_NAME"));
                    column.setDataType(rs.getInt("DATA_TYPE"));
                    column.setTypeName(rs.getString("TYPE_NAME"));
                    column.setColumnSize(rs.getInt("COLUMN_SIZE")); <-------- this is the value that is coming back smaller than the data it actually returns
                    column.setDecimalDigits(rs.getInt("DECIMAL_DIGITS"));
                    column.setNumPrecisionRadix(rs.getInt("NUM_PREC_RADIX"));
                    column.setNullable(rs.getInt("NULLABLE"));
                    column.setRemarks(rs.getString("REMARKS"));
                    column.setDefaultValue(rs.getString("COLUMN_DEF"));
                    column.setSqlDataType(rs.getInt("SQL_DATA_TYPE"));
                    column.setSqlDateTimeSub(rs.getInt("SQL_DATETIME_SUB"));
                    column.setCharOctetLength(rs.getInt("CHAR_OCTET_LENGTH"));
                    column.setOrdinalPosition(rs.getInt("ORDINAL_POSITION"));
                    columns.add(column);
          } catch (Exception e) {
               Log.getLogger().error("Could not capture table schema");
          closeResultSet(rs);
          return columns;
Edited by: user10382699 on Apr 11, 2011 4:15 PM

John, thanks for your reply.
As far as I know I'm not doing anything inaccurately/incorrectly.
The select I am using is SELECT * FROM <tableName>.
The resultset metadata has a size of 3 for the column in question, and querying the schema also yields 3 for that column.
I've tried recreating the situation using the Oracle XE DB, but as I am not familiar with Oracle, I do not know how to recreate this scenario (which would then lead me to test other options with ODBC).

Data type column size does not match size of values returned

I've tried searching but couldn't find what I was looking for, sorry if this has been answered or is a duplicate.
I am using the (Java) method below to get the column definitions of a table. I am doing this through an ODBC connection (using Oracle ODBC driver) and I have NO CHOICE in the matter.
The problem I am having is that one particular column has a column size is smaller than the size of the data it purportedly holds (ie attendance_code = varchar size 3 but data value is "Absent". I suspect the data is actually a look up to situation, where my attendance_code column has a value of 'ABS' and Oracle goes and fetchs the "Absent" value.
My issue is that the meta data returned from ODBC is the actual column definition (ie varchar(3) and not varchar2(10) for example).
The resultset metadata has a size of 3 for the column in question, and querying the schema also yields 3 for that column.
How do I resolve this? I do not have access to all_columns table etc. I have to do it using ODBC metadata only.
I've tried recreating the situation using the Oracle XE DB, but as I am not familiar with Oracle, I do not know how to recreate this scenario (which would then lead me to test other options with ODBC).
TIA.
The select I am using is SELECT * FROM <tableName>.
public ArrayList<SchemaColumn> getColumnsForTable(String catalog,
String schema,
String tableName) {
ArrayList<SchemaColumn> columns = new ArrayList<SchemaColumn>();
ResultSet rs = null;
try {
DatabaseMetaData metaData = connection.getMetaData();
rs = metaData.getColumns(catalog, schema, tableName, "%");
SchemaColumn column;
while (rs.next()) {
column = new SchemaColumn();
column.setName(rs.getString("COLUMN_NAME"));
column.setDataType(rs.getInt("DATA_TYPE"));
column.setTypeName(rs.getString("TYPE_NAME"));
column.setColumnSize(rs.getInt("COLUMN_SIZE")); <-------- this is the value that is coming back smaller than the data it actually returns
column.setDecimalDigits(rs.getInt("DECIMAL_DIGITS"));
column.setNumPrecisionRadix(rs.getInt("NUM_PREC_RADIX"));
column.setNullable(rs.getInt("NULLABLE"));
column.setRemarks(rs.getString("REMARKS"));
column.setDefaultValue(rs.getString("COLUMN_DEF"));
column.setSqlDataType(rs.getInt("SQL_DATA_TYPE"));
column.setSqlDateTimeSub(rs.getInt("SQL_DATETIME_SUB"));
column.setCharOctetLength(rs.getInt("CHAR_OCTET_LENGTH"));
column.setOrdinalPosition(rs.getInt("ORDINAL_POSITION"));
columns.add(column);
} catch (Exception e) {
Log.getLogger().error("Could not capture table schema");
closeResultSet(rs);
return columns;
}

I can't say I've ever seen a case where a column held more data than it was declared as, and would have to file that under "see it to believe it" category.
Even if that somehow were the case, I'd expect the ODBC driver to return what the column is defined as anyway, not the data. The data changes with every row, but I'd expect the table metadata to be consistent, and refer to the table definition.
For grins though, can you provide system.out.println output of the metadata, and also a "describe xxxx" from sqlplus if you can, where xxx is the table name?
ie,
while (rs.next()) {
System.out.println("column name is " + rs.getString("COLUMN_NAME"));
System.out.println("data type is " + rs.getInt("DATA_TYPE"));
..etc..
Greg

Total iCloud back up size does not match

Hello,
I just noticed that my "next icloud backup size" is only 8.6 gb, however, I have a 120GB iphone 6, 114gb which is being used. How is my icloud backup only 8.5 gb? I have the 200gb icloud storage plan.

My Windows computer has 3 terabyte hard drive. I use only 750 gigs partition. There are about 500 gigs of music, movies and tv shows, but all of them would not be included in icloud backup. Documents and settings would. So if I did computer backup it would take over 500 gigs, but if I did icloud backup of the phone with the same info, media (movies, songs apps) would not be included.
Here is what is included.
https://support.apple.com/kb/PH12519

OVI backup .nbu file size does not match actual da...

Hi,
I just backed up my phone through the Ovi Suite. The backup was VERY fast (compared to previous backups doen in earlier versions of Ovi Suite) probably due to the new fixed version of Ovi Suite.
Anyway... The backup file (.nbu) is almost 1.85 GB but when I browse my phone (in My Computer folder) and do 'Select All' the size of the data on my Phone Mass Memory reads 2.44 GB.......
SO.... is the backup data in the .nbu file somehow compressed?? Or maybe incomplete?
Thank you

Not sure but..My 1.7 GB (Phone) is equivalent to 0.6 GB (PC) .. but I have done restore without anything missing out..
The phones OS related files may not be getting Backed-up..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Home folder size does not match sum of its contents?

My Home folder using the Get Info command displays that it is around 550GB in size. In trying to find where the large files/folders might be so I can remove them, I Get Info on all the nested folders of the Home folder; Desktop, Documents, Downloads, Movies, Pictures, Music, etc. All these folders combined add up to around 25GB, which clearly isn't even close to 550 GB. I dont understand why there is such an enormous difference. What else can I do to find out what is taking up so much space? It's a fairly new iMac in recent months (not a MacBook Pro), and running 10.8.5. I dont have hardly any files on it since its so new.

Hi Beau,
Without taking a look at any logs from your device, I strongly suggest to run a rescue CD.
Download the image called "The Accelerator Binary Image" for whatever WAAS version you currently run.
Burn the cd and follow this steps:
Insert the rescue CD on the box and reload the WAE
You should see the following menu automatically:
-     Installer Main Menu: ( please do 2,3,5,8)
-     >     1. Configure Network
-     >     2. Manufacture flash
-     >     3. Install flash cookie
-     >     4. Install flash image from network
-     >     5. Install flash image from cdrom
-     >     6. Install flash image from disk
-     >     7. Recreate RAID device (WAE-674/7341/7371 only)
-     >     8. Wipe out disks and install .bin image
-     >     9. Exit (Eject and reboot)
Remove the CD from the WAE –reboot it.
here are the steps again: ( this guide is for an old version 4.0 but the steps are the same for any version)
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v4013/configuration/guide/maint.html#wp1105207
I don't usually ask this but,, please do the steps above twice on your device ( just in case).
best of luck!

PDF Page Size does not match Canvas Size

Similar Messages

Maybe you are looking for