PDF-Presentation works with Macs keynote but not with iPad keynote ???

Using this Converter PDF to Keynote" ( http://www.cs.hmc.edu/~oneill/freesoftware/pdftokeynote.html ) PDF-Presentations works totaly well inside Macs keynote. Transfering with iTunes to the iPad works well, too. But opening such a presentation in iPads keynote results in "Could not import, unknown error".
Are there any tips or tricks?
A.

Hi,
I didn't understand how you fixed the problem.
Could you please explain step by step how you sorted it?
Thanks

Similar Messages

  • Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

    Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

    YEAY!
    I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
    OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
    You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
    You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
    BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
    On my Mac, it was in ~/Documents/Digital Editions
    Import it, and drag it to your Reader.
    The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
    Worked like a charm.

  • My firewire port works with ext hd but not with audio interface

    2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

    You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
    This is not, neccessarily, an Apple issue.

  • ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
    http://support.apple.com/kb/PH1453

  • Why is my Apple id working on my MacBook but not my iPad?

    Why is my Apple id working on my MacBook but not my iPad? I can log in o.k. on my MacBook, but using the same user name and password on my iPad, I just get the Incorrect Apple ID or Password message.
    on my iPad, I have used the Forgotten Apple ID or Password link and reset the password. Even after I get the successfully reset password message it still gives me the Incorrect Apple ID or Password message!
    In desperation I have restored the iPad to Factory settings. It appears to be running OS 7. something.
    My Macbook is running 10.8.5.
    But the same problme persists.
    Please help

    I am having the same problem. Works fine on the website but telling me it's incorrect on my iPhone

  • My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?

    My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?
    I have restarted all units, disconnected and reconnected

    Hi ryanfromstockbridge,
    I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Printing troubleshooting
    Troubleshooting printer issues in OS X - Apple Support
    OS X Yosemite: Add or remove a printer
    Sincerely,
    - Brenden

  • Using iCloud my iCloud calendar is syncing with my iPhone but not with the Outlook calendar on my PC (Windows 7)

    Using iCloud, my iCloud calenda is syncing with my iPhone but not with the Outlook calendar on my PC (Windows 7)

    smurfanda wrote:
    I agree. What I see is that it is creating an icloud calendar in Outlook but I want it to sync to Outook itself.
    That is what it does. There is no sync, you have a new calendar.

  • Garagekey USB keyboard works with MacBook Pro, but not with 27"  iMac

    Just got a brandnew 27" iMac. The Garagekey USB keyboard doesn't work. It's recognized in systemProfiler, Audio-Midi Setup, GarageBand and Logic. But no Midi is coming in. When I plug it into my MacBook Pro, it works immediately. I know the Garagekey doesn't work with some 3rd party USB hubs, maybe for lack of enough power, but it works always at the internal USB hubs with the MacBook Pro. Why doesn't it with the 27" iMac? I'm cueless...
    The IMac Systemprofiler says: Current Available (mA) 500, Current Required (mA) 300. So I guess, it can't be a power problem?

    Have the same problem with Logic Pro. Works on my old Mac Mini but not on the new iMac 27" i5. Apple told me that it is a difference between the boards they used on the two computers. They said that even if I got a new mac mini I would run into the same problem. they recommended that I upgrade my mini, or try another piece of hardware to connect the two. Looking for hardware now. Good luck to you.

  • Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

    I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter).  Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it  Thanks, - Matt Symes

    OK - I appear to have resolved the issue.  I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.    

  • ESR,ID working with 8000 port but not with 50000

    Hi experts,
    I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT_RECEIVE_FAILED.
    We cross checked the services in  SMICM transaction, and we missed the HTTP port 8000 for the parameter icm/servr/port_xx.
    Then basis team changed the port 8000 in SMICM for the same parameter and restarted the Java stack.we checked the icm/HTTP/j2ee parameter which is having 50000 port.
    Now ESR,ID,SLD,RWB... etc are working with ABAP port 8000 but not with 50000 java port and also I am getting an error in SXI_ CACHE while doing my delta refresh if_http_client receive http_communication_failure : http_communication_failure:ICM_HTTP_CONNECTION_FAILED. Kindly suggest me to resolve this error.
    Naveen

    Hi,
    Re: Architecture of PI 7.1
    NW PI 7.1 - ICM is not binding to port 5$$00
    from the above two threads it is very clear that from PI 7.1 both the ABAP and J2EE ports are same.
    Now we maintained both the ICM and j2ee port as 50000. Now ESR,ID,SLD are working with port 50000.
    But in my SOAP to Proxy scenario I  am getting the same error. When I try to send request to XI server using Altova xmlspy I am getting following error in SXMB_MONI under Call Adapter
    <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
    When i click that HTML error It shows
    404 Resource not found
    I am getting the following error in CC monitoring .
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:CLIENT_RECEIVE_FAILED
    My reciever communication channel is in green status CC monitoring.
    I tested my server proxy in my end system which is successfully fetching data.
    I am using the following URL format for generating the WSDL from Integration directory.
    http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
    Do we need to maintain the Fully qualified host name  in the above URL?
    I tried with a test scenario which is an asynchronous communication with the above mentioned URL format. I got a success message in SXMB_MONI.
    Since I am using PI 7.1 I tried the following URL also  but i this case,the XML spy itself throws error. I couldnt see any messages in SXMB_MONI.
    http://host:port/XISOAPAdapter/MessageServlet?senderParty=&sender
    Service=FS&interface=IF&receiverParty=&receiverService=TS&interfa
    ceNamespace=IFNamespace
    I have seen many threads in SDN for this same error but I didn't get an answer for my scenario.
    Lakshman and Manjusha
    Thanks for the quick responses.
    Regards
    Naveen
    Edited by: naveen perumal on Jul 24, 2009 8:00 PM

  • Wireless video link example works with antenna only but not with SMA to SMA cable

    I am trying to run wireless video link example https://decibel.ni.com/content/docs/DOC-22728 . It works fine if I use install antennas on my Tx and Rx USRPs. But it does not work if I use SMA to SMA cable to connect Tx and Rx USRPs. Can somebody guide me what is the reason why it is only workng with antennas but not with SMA to SMA cable. 
    Thanks 
    JK

    I connect the 30 dB attenuator at RF input port of Rx USRP. But it does not work completely.
    Without connecting attenuator i was not able to receive any thing on my Rx VI although it shows waveform. But after connecting attenuator receiver some times receive text messages and some times not. Also it does not work at all for images and for video it works partially but gives some error related to memory full after few mins.
    I want to know why this example works completely without any problem if I use antennas, and why it does not work perfectly if i use sma to sma cable for connecting transmit and receive usrps.
    Please guide
    Thanks 
    JK

  • Apple ID works on macbook pro but not on ipad after upgrade to IOS7

    My Apple log in ID works on my computer but not on my ipad anymore, now that I have installed ios7. Any suggestion?
    Armelle

    Could you be more specific about "it doesn't work?" Where exactly are you seeing the problem and what exactly is happening?

  • Macbook Pro 7,1 (mid 2010?) boot with 6GB mem, but not with 8GB

    Hello,
    I bought a Macbook Pro 13" equipped with 4GB RAM at Apple Store on Oct-2010, and it says it's Macbook Pro 7,1 in profiler.
    I tried to upgrade the RAM from 2GBx2 to 4GBx2, but the MBP freezed in boot sequence with 8GB RAM.
    After some tests, including swap and change the combination of memory modules, I found my MBP can boot with 2+4GB configuration, but not with 4+4GB.
    Does anyone know similar issue on the latest MBP 13"?

    This is a memory speed problem - check here: http://discussions.apple.com/thread.jspa?messageID=13154160#13154160
    When using 2+4 gb, memory speed is choosen, based on the slowest dimm - the 2gb one (1066mHz), when using single/double 4gb - speed is 1333mHz).
    You can see the memory speed in diagnostic mode. I'm trying some stuff, if I succeed, I'll post my way.
    ps. Changing 4gb memory sodimms to 1066mHz will solve your problem. Or if apple fixes the efi to downclock the 1333mhz ones (which btw every pc can do from the bios).

  • Airport/TC working with MacBook Pro but not with my Mac Pro???

    Hi all,
    I've got a Time Capsule connected to a Westell Modem through AT&T. Needless to say; I've had a lot of issues with my setup but this one has my stumped.
    After my network crashed a few days ago, I reset everything and got my Airport network running on my laptop. I cannot get it to work on my Mac Pro. My MP doesn't even see the Time Capsule when I run Airport Utility. It'll show the network on the Airport Icon at the top of the page and will even let me choose it when picking a network to connect to.
    Anyone know what to do, please help!!!
    Thanks!!!
    Chris

    On the Mac that won't connect using wireless:
    Open System Preferences and click on Network
    Click the Airport connection on the left
    Click the Advanced button on the lower right
    Look for the name of your wireless network and delete it using the - (minus) button at the bottom of the connection list. Delete any other networks that you do not need as well
    Apply changes
    Open Hard Drive > Applications > Utilities > KeyChain Access
    Under the Kind column, look for any listings of Airport Network Password and delete them
    Restart your computer
    Keep your Mac close to the TC for now and click the AirPort icon at the top of the screen and try to log on to your wireless network.

  • Why does my Web Handler work with Internet Explorer, but not with Firefox

    I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
    In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
    var WebHandler = "Example.xml"
    tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
    This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
    var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
    so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
    This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
    /GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
    that returns the XML that it is supposed to.
    I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
    Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
    Thank you, Robert.

    Problem solved. The issue: Content Type was not correct.
    Visual Studio creates the web handler with dummy code like this: -
    Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
    context.Response.ContentType = "text/plain"
    context.Response.Write("Hello World")
    End Sub
    I wrote a database query that set a string variable to the XML I wanted: -
    Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
    Dim Outstring as string
    ' my logic to fill Outstring with XML
    context.Response.ContentType = "text/plain"
    context.Response.Write(Outstring)
    End Sub
    This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
    context.Response.ContentType = "text/plain"
    should be
    context.Response.ContentType = "text/xml"
    It now works with IE, FF, and Chrome, and presumably all others.

Maybe you are looking for