PDF presets are lost after upgrade to CS6 and uninstallation CS4

Since upgrading to CS6 from CS4 and subsequently uninstalling CS4 (and CS3) - as advised by IT - I have lost the presets I had when I export to pdf from Illustrator & Indesign - the drop down menu options of PRESS QUALITY, HIGH QUALITY and SMALLEST FILE SIZE have gone.
I have a back up of CS4's settings but no idea which one I need and what to do with it in order to reinstate these options.
Any ideas?
Thanks so much

You simply would have to copy the presets into the  folder:
C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Settings
I'd be careful, though. Overwriting default presets with an older version may cause compatibilty issues.
Mylenium

Similar Messages

  • My camera folder does not open and all my pictures are lost after upgrading?

    after the upgrade and i dont think i am going to use cloud.....i tried to open my camera roll and there are no pictures at all! and now it keeps crashing i click it and it closes right away???? anyone have any ideas?

    Hello swordbreaker. Thanks for the response.
    The "My Safe" bit seems to be a Toshiba programme written by UPEK as part of the fingerprinting set-up on the Satellite 200. My Safe is an encrypted folder that is sitting on the desktop. The problem I had was that it no longer did anything when I double clicked it. The problem occurred after I went through the Norton de-install and then install routines. (I was trying to install Ghost but it would not install.
    Then I found a Norton Protection suite which I never used had been installeed on my U200 when I bought it and I had to deinstall it before Ghost would install.) I think you were correct that Norton was the cause of the problem because it corrupted something in the UPEK programme.
    After a little thrashing about I found that I could download the UPEK programme from Toshiba and I did that and re-installed the fingerprint stuff and My Safe then worked. your response did give me the heart to find the answer.
    Thanks.
    Regards, Robert.

  • My groups are lost after I create them and shut down and restart.. Very frustrating.

    I create the tab groups during a session on my Imac desktop with 10.6 osx and firefox 4.0 but they are lost everytime I close and restart..

    Hi jennyoutwest,
    Welcome to the Support Communities!
    The following articles will provide some troubleshooting steps for your iPhone.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
    iPhone User Guide for iOS 7
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    The final troubleshooting step would be to restore your device:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
    Verify that you are using the latest version of iTunes.
    Back up your device.
    Transfer and sync content to your computer.
    Cheers,
    - Judy

  • Some notes are lost after typing them in and quitting (but 30%)!

    HI fellow apple enthusiasts,
    I am running an iMac and a MacBook Air with both latest OS and an iPhone.
    I have the strangest experience with notes: some notes are just lost when I type them, quit notes and open it again.
    They are just not there.
    I have allready gone made because I have typed a lot of stuff in there and then its just - vanished.
    I allready getting used of copy past all then quit and open again to see if its there, but its happening pretty often and I have no clue whats going on!
    thanks, alex

    Try deleting the Notes .plist. Quit Notes. Test afterwards.
    You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~/Library. Delete the .plist(s) for the application.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.
    If that didn't fix the problem quit Notes, go to the user library again, and move the Notes container to your desktop (make sure it doesn't just copy).  Test. If that didn't solve the problem, put the one on your desktop back.

  • Workspace is messed up and presets are lost

    Hi I am using Audition 2014.2.
    Sometimes, almost every day, when I open Audition the workspace is messed up and every  pannel is pushed to the upper left corner of the window.
    The same time, all the presets are lost and the Presets list of the effects rack is empty.
    I can reestalish it by deleting the folder "user/xxx/AppData/roaming/adobe/audition", but after a while the annoying problems reaapear.
    Thanks,
    Daniel

    You have to stop your computer trashing the folder for whatever reason - Audition doesn't do this.
    Make sure that you are using it as an administrator user, and that you haven't got some sort of protection scheme in place for supposedly protecting your settings - they regularly trash stuff you actually want...

  • My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
    There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
    Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
    Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
    Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
    In Mail, choose File/Import Mailboxes....
    Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
    It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
    I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
    Problem solved - for me anyway!!
    Hope this helps.

  • All music links are lost after installing windows 7!!! HELP!!!

    All music links are lost after installing windows 7!!! HELP!!!
    I upgraded my system to windows 7 ultimate from Vista and installed itunes 64px. but when I copy the old itunes folder into D://music and opened itunes, all my music cannot be played. each link shows the mp3 location as: file://localhost/D://music/itunes... ... I ve tried deleting library file and copy/past the original one again. doesn't work. what should I do now. It's 106 GB songs. I cannot locate them one by one nor lose all my ratings and play counts.
    please help me!!!!!!!! >_<

    Was that Win 7 update from Lenovo, or Microsoft?  If Lenovo, it should have installed those missing features. If it was from Microsoft, you have to manually install the Lenovo drivers and software.
    The easiest way to do that is to first install ThinkVantage System Update and run it.  It should download and install the other drivers and apps.  I'm running Win 7 pro 64 on my T400 - a MS upgrade clean install, then TVSU installed the Lenovo stuff.  Everything works.
    Use the "SUPPORT" button at the top of this page, then "Download drivers and software" enter T400, install TVSU and you should be off to the races.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

    After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

    Disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

    After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

    If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.

  • My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers?

    My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers? Thanks a lot !!!!
    我的书签在电脑突然被断电之后全部丢失了,我该怎么办呢??谢谢啦!!~~~~

    This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
    * http://kb.mozillazine.org/Lost_bookmarks

  • Forbidden Access after upgrading to CS6 - HELP!

    I have created about 10+ sites all created in CS4. I recently upgraded to CS6 and used the built in DW FTP to upload a page I had changed on one of the sites. This is the way I've always done it in CS4. Now I am getting the following error:
    Forbidden
    You don't have permission to access /Pages/Contact_us.html on this server.
    Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
    How do I correct this??

    Thanks for your response Kenneth. In the Permissions, it does say "644". "Read" and "Write are checked but not "Execute".
    I shut my computer down last night and this morning it let me override the files and now everything seems to be working.  I just purchased a new Mac Pro and am working through all the kinks. 
    -Barb

  • Can't use "Place Linked" or "Place Embedded" or "Open" after upgrading to Yosemite and PS CC 2014

    When I go to File > Place Linked / Place Embedded / Open it isn't working anymore after upgrading to Yosemite and PS CC 2014.
    If I drag a file to Photoshop, I can open it that way, or by using "Open Recent".
    I've tried going to the folder "Adobe Photoshop CC 2014 Settings" and deleting the file "Adobe Photoshop CC 2014 Prefs.psp", and then "Place Linked / Place Embedded / Open" works once, but then it stops working again?

    Yosemite is still full of bugs that Apple has not been able to fix.  Thank Apple for the damage to your Photoshop install.
    To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
    Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
    Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
    NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
    How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
    Mac OS
    Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If  you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

  • I have Creative Suite 5 Design  Premium (teacher and student edition), how can i upgrade to CS6 and

    I have Creative Suite 5 Design  Premium (teacher and student edition), how can i upgrade to cs6 and how much is it. I want to use it forAdobe Creative Suite 6  Design & Web Premium Digital Classroom Book ? I already bought the book thinking it was for Creative Suite 5 not 6 .I don't know where to get it any where else if anyone would be willing to help me out I would really Appreciate it alot. I would just return the book but Its past the return date. I bought the book at Barnes & Noble . I thought the Software would be included but I was wrong.
    Thank you for any help you can give me ~
    angelmia08

    If you are eligible for a new copy of the Teacher and Student edition, that is the way to go. It is generally cheaper to get new teacher/student versions than upgrade to a commercial version. However, with the Creative Cloud now available, I do not know if the CS 6 teacher/student versions are still available.

  • Upgrades for CS6 and Lightroom 4 issues...

    I bought both upgrades for CS6 and Lightroom 4.  I downloaded the upgrades on my MAC desktop computer.  Everything was fine.  When I searched for them in applicatins, it showed both CS5 and CS6 and the same for Lightroom 3 and Lightroom 4.  Should I delete CS5 and Lightroom 3?  Thanks in advance. 

    Feel free to remove the older versions if you are reasonably sure you have migrated all your files and have no technical issues. Just make sure to run the proper uninstallers, not just trash the apps. Also be warned that you may need to reinstall LR4 and CS6 to fix broken file associations and shared components like Bridge...
    Mylenium

  • Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

Maybe you are looking for

  • Problem with WorkFlow of Purchase Orders related to non active employees

    Dear all, We are running into issues with the WorkFlow when people are linked to a PO who are not anymore an active employee. That will give problems in the workflow as those people are logically not going to goods receipt/invoice reciept/approve tho

  • Home button on iPad2 no longer works after iOS 7 upgrade

    I upgraded my iPad2 to iOS 7 today.  The home button no longer works.  I've powered it down and back up as well as restarted it but it's still not working.  Any suggestion greatly appreciated. About to fly to China and was looking forward to watching

  • Customer & vendoar Trial balance under Business Area Wise

    Dear Experts,                       Pls tell me the T.code for Customer & vendor Trial balance under Business Area wise. I am ready to assign full points. Thanks & Regards avudaiappan

  • PDF Printing using BI Publisher

    Hello, I'm using APEX 4.2 and trying to export some classic reports to PDF. I followed these directions to install BI Publisher: http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html Entered these v

  • 802.1X Novell Chap authentication problems

    Ok, I've got FreeRadius up and authenticating successfully to eDir with LDAP. If I boot workstation only and use the built in Microsoft supplicant, etc. PEAP MSCHAP, I can authenticate to my access point using my edir credentials. Then I can click on