Pdf Preview Handler Error outlook 2010 Server 2008
Pdf Preview Handler Error in outlook 2010 32.bit and Server 2008 64.bit. Using Adobe X. Registry app id correct. Turned on previewer in outlook in trust center. Repaired adobe installation. All to no avail. Any thoughts or fixes. Please Help
Hello i got nearly the same problem. Selecting the .pdf attachment in outlook. error code says that no preview can be showed, because the needed preview isn't installed.
Server 2012 R2 as Terminalserver, Outlook 2013, newest version of adobe reader XI.
I've already checked the following:
- outlook>options>trustcenter>trustcenter settings>attachment handling .. the box disable preview is clear .. furthermore outlook>options>trustcenter>trustcenter settings>attachment handling>attachment and documentpreview .. all
boxes including pdf preview handler are filled.
- adobe reader XI>edit>presettings?>e-mail-account ... outlook is standart.
- Registryentry: "Change the AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}"
- also i repaired the adobe installation and i reinstalled it a few times.
- even checked the access-rights on the temp. directorys outlook uses for attachments and the users have full access.
i have no more clue what it can be..
so may you have the solution for me or at least some tips.
Thanks,
Nikolai
Similar Messages
-
Can't open PDF's on my Mac coming in on MS Outlook 2010. Reinstalled Adobe software 4 x and still get "Adobe PDF Preview Handler" error message.
No. Reader will not damage files. It is only meant to read pdf files. PDF files are frequently damaged when sent as email due to encoding issues.
-
PDF Preview handler error with outlook 2013 on RDS 2012R2
Anyone had any issues with outlook x64 2013 office and "PDF Preview handler", we are running adobe 11 with server 2012 R2. CHecked all the recommended reg settings are correct:
"Change the AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}"
However still prompted with "this file cannot be previewed because of an error with the following previewer: PDF Preview handler"
Also causes a popup box to say an internal error has occurred.
Loads fine when you double click the attachement.Hello i got nearly the same problem. Selecting the .pdf attachment in outlook. error code says that no preview can be showed, because the needed preview isn't installed.
Server 2012 R2 as Terminalserver, Outlook 2013, newest version of adobe reader XI.
I've already checked the following:
- outlook>options>trustcenter>trustcenter settings>attachment handling .. the box disable preview is clear .. furthermore outlook>options>trustcenter>trustcenter settings>attachment handling>attachment and documentpreview .. all
boxes including pdf preview handler are filled.
- adobe reader XI>edit>presettings?>e-mail-account ... outlook is standart.
- Registryentry: "Change the AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}"
- also i repaired the adobe installation and i reinstalled it a few times.
- even checked the access-rights on the temp. directorys outlook uses for attachments and the users have full access.
i have no more clue what it can be..
so may you have the solution for me or at least some tips.
Thanks,
Nikolai -
Adobe PDF preview handler error after install Reader XI
I have received a notification that an update to Reader XI is available. After the installation M/S outlook could not preview all PDF files with the error:
This file cannot be previewed because of an error with the following previewer:
Adobe PDF Preview Handler
To open this file in its own program, double-click it.
My system = Windows XP / Outlook 2007
What should I do?I know this thread is pretty old, but JIC - Try disabling internet auto-detect:
Open Adobe Reader
Go to Edit menu>Preferences
Click Internet, then Internet Settings
Click LAN Settings
Uncheck the box “Automatically detect settings”
Click OK buttons and close Adobe -
No Default Mail Client Error with Outlook 2010, Server 2008 R2 Terminal Server, and TAM
We are running a software package on a Windows 2008 R2 Terminal Server called TAM (The Agency Manager) along with Outlook 2010. The application uses a MAPI connection to retrieve mail data from Outlook to be able to send and receive messages inside
the application. On our individual PC's this works just fine, but on the Terminal Server users we get the message "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook
and set it as the default mail client."
I've tried the steps listed in KB 813745 which tells you to delete the registry keys and run a repair in Office, but that didn't resolve the issue. I've searched on this issue, but haven't found anything useful. Any suggestions would be much
appreciated.Try to set DEP and add outlook.exe. I had outlook 2007 same problem. With DEP enabled and outlook, word en excel also added to the list it worked again.
You can find it under this computer, properties, then change settings. Click advanced tab and then select the first "settings" option.The click the "Data Execution Prevention" (DEP) and select the last option and add the office programs
there.
Hope this helps. -
PDF Preview Handler Not Working in Outlook 2010
I have Win 7 Home Premium 64-bit and Outlook 2010.
Everything was working fine, until a few months ago when the PDF Preview Handler stopped working. I got the typical message that others were having with the issue with Adobe Reader 9. I have Adobe Acrobat X Pro and have also used Adobe Reader X. I have tried the little registry fix app that is supposed to fix this issue, but it states that my registry is already correct. Has anyone found a resolution for this issue with Acrobat X and Outlook 2010? As a workaround I am using the Foxit PDF Preview Handler, but I have to reinstall it everytime Adobe Reader or Acrobat is udpated as for some reason Outlook then reverts back to the PDF Preview Handler, which is not working.
Thanks,
MergNope, using 32-bit. And I recently uninstalled Acrobat Pro completely and reinstalled it due to an issue with it not updating due to having the "Error Applying Transforms" issue. After I reinstalled, I updated it completely. I suppose I can try uninstalling and reinstalling again, but that seems like overkill.
- Merg -
Error in PDF preview Handler in Windows Explorer x32
I'm running Windows 7, 32 bit. and I get this error when trying to view a pdf in the preview pane "Error in PDF Preview Handler". I have Adobe Reader X installed, and have re-installed it with no help.
I've read many problems about this, but everyone else is running 64 bit. I'm running 32.
Any help please. Thank youYes - sorry !
I solved my problem with the exchange of the UNC path against drive letters for the folders in
Administration - System initialisation - General settings - Tab Path
Before:
sbo-data\ruk\attachemnts
After: E:\ruk\attachements (E: is a local drive of the server and we run B1 via Windows Terminal Client on the same machine)
Before I did this, I checked the user rights on the paths, checked the DNS, hosts file, etc.
Regards
Michael Benner -
"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
I am absolutely pulling out my hair over this one!!
PC/Win 7 64bit/Adobe XI/Office 2010
I have tried Uninstalling and re-installing
I have tried using an adobe software removal tool
I have tried modifying the security settings in reader
I've tried running repair on MS Office
If you open the .pdf from an email directly, it opens Reader with the error "Internal Error Occurred"
If you drag and drop the .pdf onto the desktop, and then open it, it opens.
If you open Adobe Reader FIRST, then open the .pdf from the email, it opens fine.
ONLY when you open a .pdf from an email with Adobe Reader closed (so Outlook is asking AR to open first, and then present the .pdf) is it behaving this way.
Hypothesis: Outlook 2010 does not like to open Adobe Reader.
SO....tell me all of you brilliant geniuses? How do I solve this puzzle and become an end user's hero?
PS: WorkAround - the only work around I have found for this at present, is that the user first opens up Adobe Reader and lets it run in the background. I pinned the shortcut to his task bar to remind him.I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error
-
PDF previewer in Microsoft Outlook
For some reason, I have lost the functionality for previewing PDF files in Microsoft Outlook. While I can double click on PDF attachments in emails and open Adobe Acrobat Full Product, I cannot preview them. "This filed cannot be previewed because of an error with the follower previewer - Adobe PDF Preview Handler." I have tried to turn on and off that function in Outlook. I have uninstalled Adobe Acrobat 9 Pro, taking care to have outlook closed when I do so. I have also installed, uninstalled and reinstalled Adobe Reader. I have gone to the Microsoft knowledge base. None of this makes a difference. I figure somewhere, a file has been deleted or corrupted. Any thoughts? Thanks.
It appears that Outlook cannot open .pdf attachment because there is a missing link between Acrobat and Outlook. Tow possibilities for this problem might be such:
1. You have both Acrobat Reader also installed on your system. Adobe recommend that both product (Reader and full Acrobat) should not be on the same system. If this is the case for your system, you should uninstall Reader.
2. Another possibility is that something is wrong with you Acrobat installation. On my system, there two Acrobat icons in the Outlook toolbar. If this is not the case on your copy of Outlook, try a repair operation on Acrobat and see if this solves your problem. If that does not work, do a repair on Microsoft Outlook.
Good luck.
Ken Friedman -
Can someone please help. Since updating to Adobe X1 on a windows 8 system, some emails with an attached PDF file will not open. Keeps coming up with the error 'PDF preview handler'
Thank youHi Ford Man,
You might want to try the steps mentioned here: Error opening attachments / Cleaning out the Temporary Outlook Files folder - HowTo-Outlook
Regards,
Rave -
Again after last patch: Windows 64 - PDF preview handler not working
Adobe's PDF preview handler doesn't work unter Windows XP/Vista/7 64 bit. Because of that PDF preview e.g. in Windows explorer or MS Outlook isn't displaying PDF preview.
This issue has been discussed in this forum some months ago, and this page gives a solution that has helped:
http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html#fixer
Instead of fixing this well-known issue with the last patch Adobe decided again not to fix. And after installing the patch you have to repair PDF preview handler again...
Friendly
Philipp
Philipp
http://ferienbretagne.livejournal.com
Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit, Acrobat 9Hi Sree,
According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
https://forums.adobe.com/community/adobe_reader_forums
By the way, after do some search, it seems not working for 64bit machine,
>> It is working fine in Windows 7 and Vista
Also work fine in win7/vista 64bit????
If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
PDF Preview Handler will not open 1 file
Hi,
I have Office 2013 and Acrobat XI, the PDF Handler works fine on all my files except one.
Through our online ordering, I get a confirmation email with E-Order.pdf with every confirmation, worked for a while and now gives me the
"This file cannot be previewed because of an error with the following previewer
PDF Preview Handler
To open this file in its own program, double-click it."
If I go to any other PDF attachment it works fine.
Thanks
GreggHi Anubha,
Yes I do have the latest version of Acrobat 11, 11.0.10.
I have tried turning the PDF Handler off and back on, that didn’t fix it.
I also installed Reader 11 and that did not fix it.
If there is something else I can try please let me know.
Thanks
Gregg Hynda
General Manager
P 07 5576 5757
F 07 5576 6990
M 0412 644819
E <mailto:[email protected]> [email protected] -
Hi Guys ,
We are facing a serious issue with Windows 8 and Adobe PDF Preview Handler . We are using the PDFPrevHndlr.dll from Adobe to show PDF Previews in our application. It is working fine in Windows 7 and Vista and for some reason it is not working in Windows 8.1 64 bit machines after upgrading to Adobe Pro 10.0.10 . Please help us figure out what is the root cause of this issue .
During a close analysis we have found that the PrevHost.exe( Windows component ) is failing soon after it is being invoked . Any help in this is much appreciated.
Regards
SreeHi Sree,
According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
https://forums.adobe.com/community/adobe_reader_forums
By the way, after do some search, it seems not working for 64bit machine,
>> It is working fine in Windows 7 and Vista
Also work fine in win7/vista 64bit????
If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Adobe PDF Preview Handler Issue in WIndows 8 64 Bit Machine
Hello Gurus ,
We are facing a serious issue with Windows 8 and Adobe PDF Preview Handler . We are referring the PDFPrevHndlr.dll from Adobe to show PDF Previews in our application. It is working fine in Windows 7 and Vista and for some reason it is not working in Windows
8.1 64 bit machines . Any help on this topic is much appreciated.
Regards SreeHi Sree,
According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
https://forums.adobe.com/community/adobe_reader_forums
By the way, after do some search, it seems not working for 64bit machine,
>> It is working fine in Windows 7 and Vista
Also work fine in win7/vista 64bit????
If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012
hi,
can you repair system file errors like ntoskrnl.exe in windows server 2008 and 2012 like like before in windows server 2003 ?
the steps were repairing ntoskrnl.exe error in windows server 2003
1- have a 2003 cd and from that cd start recovery console and copy from i386 directory ntldr and ntdetect.com to windows /system32 directory on the server and then repairing
2- MBR with fixmbr command and then rebuild BOT.INI file with bootcfg/rebuild .
now my question is how you repair or solve such problem with ntoskrnl.exe error in windows server 2008 and windows server 2012
thanks
johan
h.davidfirst this wil take a lot of time for windows 2008 and 2012 ,
and what about windows 2003 I thing this has no startup repair
thanks
johan
h.david
What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Maybe you are looking for
-
The Nokia E51: The things that work, and the thing...
Wonderful phone. Let me list my accomplishments and outstanding challenges. Challenges * Finding a video player that will play common formats like xVid in LANDSCAPE format. I did find a free app that will download and play anything on Youtube, but ag
-
FileReader message schema not found on deployment
Hello, I'm developing a composite where I have a file reader adapter, and I'm specifying an existing schema (in my project) as the message schema. When I click on "browse for schema files", it correctly shows me the schema in my another project in th
-
hi, I keep trying to install itunes 11 on my laptob which has windows 8 but after running the .exe nothing happens each time I tried with itune 10 but the same problem happens.
-
Removing some pages/files/archived blog entries with in a website
I noticed on my iDisk there are pages/files/old blog entries that I had removed from my iWeb (on my computer, saved and then published to .Mac). I am getting close to running out of room on my .Mac/iDisk account that is why I saw that there were old
-
BOM quantity and Base quantity
Hi, I have the follwoing scenario in BOM. I have a plate size of 700 (OD) x 500(ID) x 60 (Thickness). I'll cut this plate in to following different items (Different material code) and qty A - 28 B - 3 C - 1 D - 1 E- 2 How can I define in BOM in term