PDF Printer not saving files; 9.5.5 (pro) with Windows 7, 64 bit

I imagine that the root of this issue has to do with compatibility between the OS 64 and and 32 bit application of Acrobat 9.5.5. The installation has been uninstalled, reinstalled, and fully repaired. Initially, while printing from powerpoint (but also any other source, including chrome, firefox, or from acrobat's own interface), the PDF printer would output a generic error about the "current printer setup". After reveiwing the event log, a sidebyside 40 seemed to be causing the problem. I followed the solution posted at http://social.technet.microsoft.com/Forums/windows/en-US/a4c36078-6419-4424-8a43-ff3832786 b59/many-sidebyside-78-errors-with-acrobat-9-designer, but with no luck. I then went and installed the PDF printer manually using the adobePDF.inf file. This removed the generic error, but now when converting using the PDF Printer, no file is saved and no error dialog appears. Nothing is showing in the event viewer either. Print-to-pdf works, but the user needs specific formatting that occurs while printing. Any ideas what may be occuring?
Running 9.5.5 Adobe Pro on a Windows 7 Pro 64 bit system.

Let's step back a bit. First, since you have apparently been successful at installing the printer let us see if it works. Open and application and go to the print menu and select Print-to-file for the Adobe PDF printer. Assuming that is successful, open the file that is created (usually a PRN extension, though it is a PS file) in Distiller. Do you get a PDF now, or errors about the creation?
If the PDF is created, use ctrl-alt-del>task manager to see if Acrotray is running in the background. If not, go to the Acrobat (or Distiller) folder and start it. If you can not start it then Acrotray is the problem that you are having. It might be that it will work if installed in a 32-bit compatibility mode.

Similar Messages

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

How to Merge 1 PDF file to 50 PDF together not one by one. Using Acrobat 9 Windows xp.

Hi, How to Merge 1 PDF file to 50 PDF together not one by one. Using Acrobat 9 Windows xp.

Depending on just what you are trying to do, you can also use DOCUMENT>Insert Pages to add multiple documents or simply drag and drop the documents into the current document (OK, I have not tried this one).

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
*http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Nothing in the Acrobat 8.x product family is compatible with Windows 7 (or any contemporary OS).
The Acrobat 8.x product family passed into End of Support way back -- (November 2011).
The current release of Acrobat (XI) is compatible in Windows 7.
Be well...

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

How to import MXF files to Final Cut Pro with smooth editing

Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
you may be familiar with Material eXchange Format (MXF). Though MXF is a
great video format to record high-definition videos, it is not easy to
use in that they are not natively supported by most NLE systems like
Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
Along with some help from a top MXF Converter, it can be done. To
help those who wanna edit MXF files in FCP without problems, here I
share with you a simple guide on how to convert MXF files to edit in
Final Cut Pro 6/7 or FCP X.
First of all, downloading the App- Brorsoft MXF Converter for Mac
Overall, the program is a professional yet easy-to-use MXF Converter
on Mac (Mavericks included) which can not only convert XF100, Canon
C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
simple video editing functions for you. The MXF to FCP Converter not
only can convert MXF to ProRes for FCP, but also can transcode MXF
videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
Just download it and follow the tutorial below to get the work done.
Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
1. Import MXF files to the converter
Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
2. Select FCP editable format
Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
Tips:
a. Settings- click to set video
resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
20Mbps), frame rate (24p/30p)
b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
3. Start transcoding MXF video to FCP
Click “Convert” button to start converting MXF files to Apple ProRes
MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
is done, you can transfer MXF footage into Final Cut Pro (X) for editing
smoothly on Mac with ease.
Source:How to import MXF files to Final Cut Pro with smooth editing
[quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

Photosmart 7960w printer- which driver/procedure to work with Windows 7 64-bit

RE: HP Photosmart 7960w printer- any success with a driver or workaround to use with Windows 7 64-bit? There seem to be three options on the HP site, but it's not clear at all what will work.

Hi there,
The Photosmart 7960 Photo Printer does not have full support in Windows 7. There is no driver available to download on the hp site, but instead there is a limited driver built into the Windows 7 operating system. What this means is that basic print functionality will work for your product in Windows 7, but you might lose some other functionalities. This document on the HP support site explains what is available to you. You might also find this support document helpful. Hope that helps!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
Is it possible to use the AUTO DUPLEX feature of the printer with Windows 7 64 bit operating system.
All replies welcomed! Aaron in Calif.

Hi Aaron,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

someonehelpmaddy wrote:
My Mac knows that it is connected to the montior...
Open your Displays system preferences. Is there an Arrangement tab and does it show two screens? If no Arrangement tab then your mac does not know it has two screens. Maybe smc and pram reset will shake it free and maybe not. Maybe there's something wrong with the connection. Thunderbolt plugs are similar to mini-displayport plugs so make sure the plug is pushed firmly in so that essentially all the metal part disappears inside the socket. The plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
If you do see two screens in the Arrangement tab then click Detect Displays and Gather Windows to get the Displays preferences of the other monitor on to your main monitor. Check the resolution and if there is a refresh rate check that as well.

Tungsten t3 will not sync with Windows 7 64 bit using cradle sync

Tungsten t3 will not sync with Windows 7 64 bit using cradle sync any suggestions?

Try a low-tech solution. Check the condition of the HotSync port connection on both the T3 and the cradle.
Look for any possible corrosion, coating, or bent fingers in the cradle. Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles! (Use a q-tip swabbed in it, do not pour it onto the PDA).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp620#Wireless_Help

PDF Printer not saving files; 9.5.5 (pro) with Windows 7, 64 bit

Similar Messages

Maybe you are looking for