PDF printing cut off columns

Post Author: fmonsma
CA Forum: WebIntelligence Reporting
If i make a table in webintelligence reports with more than say 10 columns and save it as pdf is cut off the table.I want the first column to display at every page(because this are my titles) and it needs to display all columns at more pages.
Help!!

It certainly would help if you would provide us some specifics of the type of printer you are having this problem with, the driver you use with it, and the characteristics of the files that fail in this manner. It would also help if you could advise what OS version you are running on (Windows 7 64-bit) for example.
My guess is that this is not a PostScript printer and that perhaps the OS-resident printer driver is running out of memory to rasterize complex pages, but that is a stab-in-the-dark.
Come back with more info and we'll try to help.
- Dov

Similar Messages

I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

eehenry wrote:
It is a problem with a secondary provider, "mag cloud" .
Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

HP PSC 2355 all-in-one printer cuts off bottoms of letters

My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
On a Mac, 10.9.3.

Hi @timed
I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Why does my printer cut off the top of copies?cc=us

My printer cuts off the top of copies. Is there some way to adjust the printing size at the top?

gedwardc, what is the size that you are trying to scan? Is it a legal document or a normal letter sized document? Has it worked before, and this is a recent developement?
I want you to do hard reset in the meantime, so unplug the machine from both the back of the unit and the wall outlet for thirty second, and then plug it back in.
Let me know!

Hp printer cutting off the sides of a pdf document I am trying to print.

I am trying to print a pdf form to fill out, when I try to print it using my hp photosmart premium 309g the sides of the text get cut off the page.
I have been trying to find a boarderless printing setting in the printer settings on OS X 10.7 but have had no luck so far.
I urgently need to get this form printed so ny help would really be appreciated.

Hello macnewcomer22,
Please review the steps below to set Borderless printing, It can be configured within the Paper Type/Quality options.
For Lion, click the Show Details button to expend the print settings.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01368574&cc=us&dlc=en&lc=en &product=3793676&tmp_track_link=ot_search#N499
Regards,
Shlomi

Problems printing a PDF-TopMargin cuts off

I have a PDF which has been forwarded to me. When I try to
print it the top margin is cut off. In other words, the top line and a half of text is not there and the document prints way at the top of the page. This document is several pages and on each page ther text only takes up the top 3/4 of the page, so there is plent of room to shift the document down on the page and not lose anything. Is there some way this can be done? I have tried to find somethign in several of the menu's but haven't found anything. If there is no way to shift the whole document down when printing, then can anyone shed any light on why this forwarded document has this problem? Thanks.

You can crop pages in Acrobat to fix things, not Reader. You can try to Print with Page Scaling to Shrink to Printable Area.

HP Deskjet 5740 Color Inkjet Printer cutting off bottom half of letters when printing text

My Printer is cutting off the bottom half of letters when printing documents. I have tried all the troubleshooting options given on the computer and have changed out the ink cartriges as well. I am hoping SOMEONE might have a solution to share. Thanks in advance!!!

I have a user experiencing the same issue. We have removed the drivers and reinstalled them but the problem persists. Steps we have tried.... Completely uninstalled all the HP software and printer driversRebootedReinstalled drivers and printer softwareI have verified the printer has the latest firmware. It doesn't matter what program we are printing from, approximately the bottom 4th to 3rd of the photo is cut off. I do have examples I can send that show the problem. Our organization buys a lot of printers and it would suck to have to start ordering from a different vendor for future buys. But if HP cannot fix this issue, we'll have to switch to another brand. Since we cannot attach in here I have uploaded the examples. The first is an XPS printout from a word 2013 document. When it's printed it comes out as shown in the scan.pdf file. (We printed it and then scanned the printout to a PDF). It is pretty clear that the bottom of the picture is cut off. Any ideas would be appreciated. Thanks. Brian

Printing cut off in acrobat pro x

In Acrobat Pro X for Windows, some documents cut off the right side by about 1". I've tried every setting change I can think of and nothing works to get the document centered again.
Any thoughts?

It certainly would help if you would provide us some specifics of the type of printer you are having this problem with, the driver you use with it, and the characteristics of the files that fail in this manner. It would also help if you could advise what OS version you are running on (Windows 7 64-bit) for example.
My guess is that this is not a PostScript printer and that perhaps the OS-resident printer driver is running out of memory to rasterize complex pages, but that is a stab-in-the-dark.
Come back with more info and we'll try to help.
- Dov

Printing cuts off top of heads

I use PSE4 on a WIN XP with all updates. I have a photo (originally 5x7) that I resized to 4x6. WHen I try printing it on my HP PHOTOSMART 7960 on 4x6 HP photo paper with tab the printer always cuts off the top of one head. I have tried sizing down the picture to 3.95 inches and then printing on 4x6 paper. I have tried everything else I can think of and it ALWAYS cuts off the top of their heads. WHen I print the photo with a different photo software the print comes out O.K.
What Am I not selecting, etc. to print the photo as what-you-see-is-is-what-you-get in PSE4?

I'm beginning to suspect the aspect ratio of this image isn't correct. Do this experiment and see what happens:
First, make a copy of the image file you're working on so you don't experiment on an original.
Have the copy open on your desktop (in Editor), then go to Image>Resize>Image Size. Make sure there is no checkmark next to Resample, and then start increasing (or decreasing) just the number in the resolution box until the dimensions of the image are just slightly over 4 X 6. Make sure it is 4.something by 6.something, though. Once you get to that point, click OK and accept the change.
With the resized image open on your desktop, select the Rectangular Marquee tool. Once you've selected it, choose "Fixed Size" in the tool's option bar and set the dimensions to 4 X 6. Use the tool and select a perfect 4 X 6 portion of the image, then do Image>Crop. Now try printing.
Most cameras do not produce an image file that can be reduced to a perfect sized print, so a little bit of cropping is usually required. I know that the images from my camera wind up coming closest to 6 X 4.5, so I always have to take off at least 1/2 inch on that dimension that has to be 4 inches.
I don't promise this will work, but I did notice that you said you did no cropping, and that could be the reason why you're not getting the print size you want.

Photosmart C310a - photo print cut off

I print 4x6 borderless pics from PC to the printer in the highest resoltion. The preview screen
always cuts off some of the edges when in borderless mode, but none when previewing with border.
Is there a way to directly fit the photo to the size of the photo paper without leaving out any part of the pic?

StephF wrote:
I am trying to print a 6x4 photo with my HP Photosmart B8550. Everytime I go to print it, it cuts off part of the picture. I created the picture in Photoshop at 6x4 and saved it as a jpg. In the preview it shows up fine but it is NOT right when it prints. Please advise.
The edges of your image will be cut off by a printer that can’t print all the way to the edges of the paper. In order to prevent this, go to the Image Size menu again and decrease the height by 1 inch (thus also reducing the width). When printed, the image will be centered on the paper. You can also choose “Scale to Fit Media” In Page Setup.
Although I am an HP employee, I am speaking for myself and not for HP.

Label in PDF Report cut off when using font aliasing (9i2)

Hello.
I have a report and one label on the report that is a bit longer than the rest.
This label is displayed correctly in the reports builder, in the HTML report and as PDF when font aliasing is off.
But if the PDF report is generated when font aliasing is used - the label is cut off.
The label is displayed up to the point where it would finish without font-aliasing. (the alias font is a bit broader)
The field spans the whole page in the paper layout, and every char-width value I use has width 1000, so I'd guess that ain't the problem (also since the non-aliased is displayed correctly) (Btw, the string is 84 byte long)
The pdf is generated via a url like:
http://server:8888/reports/rwservlet?report='timereport.rdf'&userid=xx/yy@mydb&destype=CACHE&desformat=PDF&<...paramters...>&filename=/TR_20050703_1300_20050711_0500.pdf
Any ideas?
best regards,
Martin
Version Info:
Report Builder 9.0.2.0.3
ORACLE Server Release 9.0.1.3.1
Oracle Procedure Builder 9.0.2.0.7
Oracle ORACLE PL/SQL V9.0.1.3.0 - Production
Oracle CORE     9.0.1.2.0     Production
Oracle Tools Integration Services 9.0.2.0.0
Oracle Tools Common Area 9.0.1.0.0
Oracle Toolkit 2 für Windows 32-Bit-Plattformen 9.0.4.0.23
Resource Object Store 9.0.1.0.1
Oracle Help 9.0.4.0.23
Oracle Sqlmgr 9.0.2.0.2
Oracle Query Builder 9.0.2.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 9.0.2.0.2
Oracle XDK Java 9.0.2.0.0 Production
Oracle Virtual Graphics System 9.0.1.5.0
Oracle Image 9.0.4.0.9
Oracle Multimedia Widget 9.0.4.0.9
Oracle Tools GUI Utilities 9.0.4.0.9

Hi Scot
Just replied to your email re. conf call.
In the meantime.
1st question.
    Some of our developers are creating the reports under crystal 2008, while some are 2011.
    Could this be a problem, when they are run by the SDK?
    Should we upgrade all our developers to crystal 2011?
The version of CR a report is created in should not matter at all. I am 100% certain this is not the issue.
2nd question
    When the report is run, to create the pdf... why would it actually embed the font on the pdf?
    if they weren't embedded.. wouldn't it just pull up the proper font, if the user's pc had that font on their
    pc?
    if it does the common fonts aren't embedded, we would just have to worry about the things like
    barcode 3 of 9
I can not answer this as that essentially is the way the product is designed. It may look like a limitation, but there are no work-arounds and I would not consider this to be a bug. Perhaps an enhancement, but a pretty faint hope there. And even if, enhancements take very, very low priority and take long, long time before implementation.
3rd question
    Would the fonts, just need to be installed on the server?   we've seen some indication, that they
    also need to be in a java sub-directory
The fonts must be on the server as that is where the report engine does it's work, then the report is streamed to the user's browser. E.g.; there is no work done on the browser. Also, the process must have rights to access the fonts.
One last point. You mention deployment to Linux. Linux is not supported. Please see: SAP Crystal Reports, Developer Version for Microsoft Visual Studio - Supported Platforms
I suspect this is more an issue with CR not working with the framework for Linux.
- Ludek

Borderless printing cutting off bottom

I have been printing borderless 5x7 prints in PSE8 forever. All of the sudden yesterday, it started cutting off the bottom of the print. It still prints borderless on top and the sides, just not the bottom. I know for a fact it is not the printer. I am not sure if there is some setting that has accidentally gotten changed or what......any help would be GREATLY appreciated!!

Suggest that you reset preferences. It may fix it:
Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
Press and hold Alt+Control+Shift immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file.
A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help.
Close the program and reopen.

JInternalFrame - print cut off

Hi there,
I have tried to print out the JInternalFrame's content by overriding the print() mentod.
However, it seems only those that shown on screen was printed out, i.e., if I resize the frame to a smaller size, I print out fewer things.
On top of that, even if I maximize the frame, only half the page is print out (i.e., I got half a blank page which I need to fill).
Here is my code for printing the frame
public class JPInternalFrame extends JInternalFrame implements Printable {
   public JPInternalFrame() { }
   public int print(Graphics g, PageFormat pf, int pi) throws PrinterException {
   if (pi >= 1) {
       return Printable.PAGE_EXISTS;
   Graphics2D newG = (Graphics2D) g;
   newG.setClip(0,0,650,850); // reset to a new clip cooedinate
   newG.scale(0.6,0.6);
   Font f = new Font("Arial",Font.PLAIN,10);
   newG.setFont(f);
   RepaintManager currentManager = RepaintManager.currentManager(this);
   currentManager.setDoubleBufferingEnabled(false);
   super.paintAll(newG);
   currentManager.setDoubleBufferingEnabled(true);
   return Printable.PAGE_EXISTS;
.and
public void actionPerformed(ActionEvent e) {
      PrinterJob printJob = PrinterJob.getPrinterJob();\
      printJob.setPrintable(one);
      if (printJob.printDialog())
      try { printJob.print(); } catch (Exception PrintException) { }
}Thanks for your time.
Sam

Hi there,
I just found out that my JInternal Frame can now print a full page. But this only happens when I open multiple JInternalFrame.
- If I only open 1 frame, it only print half a page (cut off at the middle);
- If I open multiple, print any one of them would be a full page;
- If I open multiple 1st, close them down to 1 frame, it would still print a full page;
- If I close them all, open 1 frame and print, it would back to half-page-cut-off...
Would anyone able to give me some direction please?
Much appericate for any help!
Cheers
Sam

Printer cuts off top inch of page

When I print something off the internet, for instance my bill from my cable provider, the top one inch is cut off which may contain important infromation. Can I adjust something myself on the printer or do I need service?

Hi 454mom, Welcome to the HP Forums! Some questions for you: What Operating System are you using Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.What happens when you print from another program? ie: NotePad (Windows) or TextEdit (Mac).Are you able to make copies with the printer? Copy Text or Mixed Documents. If you are using Windows please try our HP Print and Scan Doctor, and let me know what happens! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums. Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Hp printer cuts off right side of paper

Hello,
I am new to this but I have a problem that needs to be answered pretty quickly please, when I try to print out an email the right side of the email gets cut off, I checked the printer setting and even the preferences but everything is alright, nothing wrong there, but every time I print I happens. Also when I go to print out a picture the picture turns out yellow, please I tried everything I could think of.
This question was solved.
View Solution.

Hi - Can you provide the model of printer you're using? That will help determine what steps to take to troubleshoot. Typically though, when the print out is being clipped or cut off, it has to do with a paper size mismatch between the printer driver software and the settings in the software you're using (i.e. MS Word). Make sure that the paper size settings in the sw (typically under page setup) match those of the printer (typically under printer setup).
As for the color issue, the first step will be to run a self test page on the printer to determine whether it is an issue with the ink cartridges. How to run the test page from the printer is dependant on the printer model.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

PDF printing cut off columns

Similar Messages

Maybe you are looking for