PDF printing is broken with  "Stopped Filter failed"

This is really a "windows" kind of error, that i was not expecting to see in Mac,
I have Timecapsul  wireless network, printer 7520 (HP) I bought it from Apple store,and macbook pro.
everything works I have printer setup wirelessly etc ..  but for some reason I can not print from PDFs only
again it only happens with PDF files, all other doc formats print fine.
I have full licensed version of acrobat XI Pro.
I tried reinstalling driver, removing adding printer etc ... nothing helps,
my computer name in sharing is not empty, ... what else to try?
now I am deciding should I contact HP Adobe, or Apple for tech support,
this is so confusing ...

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Similar Messages

  • Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

    Hi, I have updated to latest OS and now my Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.
    I am running OS X 10.9.3 (13D65) on a 3.4 GHz Intel Core i5 iMac with  8 GB 1600 MHz DDR3
    I've done a complete system re-install and also performed a targetted install of just the Canon Drivers - but all to no avail.
    The printer is OK with regard ink-levels and is/was working fine. It will print out 'photocopies' independantly of the iMac. Additionally, from within the Print Queue I can view the ink-levels so there are comms between the iMac and the Canon - it's just that 'Print' seems to be off topic.
    Can anyone help as I have to get a document out tonight
    Many thanks in advance
    S

    Is that device desSystem Preferences - Print & Scan - Right click the printer and select Reset Printing System. DO NOT use any Canon software.
    You did not advise how it is connected (USB- Wi-Fi- etc..) so it's a little difficult to assist with so little information.

  • I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    Okay, regarding this problem:
    I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
    I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
    Please follow below steps:
    In Spotlight search window type Terminal and then press Enter.
    This should bring up the terminal window/program.
    In the Terminal type:
    sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
    It will ask for your password. Please enter system password.(You will not see password entering)
    After that type following:
    sudo launchctl stop org.cups.cupsd then press Enter.
    Try Printing.
    I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
    Hope this helps people out!

  • Has anyone else seen this error when printing "Stopped - filter - failed"?

    Currently I am trying to print to a new Dell C1765NFW Color MFP with Mac 10.8.2. I can print from a Word document but not from an Adobe PDF file. I have cleared the CUPS folder and rebooted however it is still not working with PDF files. It attempts to print but then comes back with "Stopped - filter - failed". Any ideas? The printer is also connected through USB and the newest driver for the printer has been installed.
    Thanks!

    Errors "Exit Code: 6," "Exit Code: 7"
    Mylenium

  • Canon MF5950dw throwing Stopped - 'filter' failed printer error

    We just bought a Canon MF5950dw printer, and on a MBA running 10.8.2 when we try to print anything over the network, it'll stop with the error: Stopped - 'filter' failed.
    I've:
    repairing permissions from the rescue disk
    tried deleting and re-adding the printer
    uninstalled and reinstalled the drivers
    reset the CUPS printing system
    and nothing has helped. The MBA has no problem printing to our old printers. It works fine on the my MBP running 10.8.2 and our Windows 7 machines. It persists whether I set it up as a Bonjour printer or an IP printer.
    Anyone know how to fix this? thanks!
    Below is the cups error_log:
    E [19/Jan/2013:16:29:39 -0500] [Job 6] Job stopped due to filter errors; please consult the error_log file for details.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] The following messages were recorded from 16:29:38 to 16:29:39
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding start banner page "none".
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Queued on "Canon_MF5900_Series" by "kelly".
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Auto-typing file...
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Request file type is application/vnd.cups-banner.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] File of type application/vnd.cups-banner queued by "kelly".
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding end banner page "none".
    D [19/Jan/2013:16:29:39 -0500] [Job 6] time-at-processing=1358630978
    D [19/Jan/2013:16:29:39 -0500] [Job 6] job-sheets=none,none
    D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[0]="Canon_MF5900_Series"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[1]="6"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[2]="kelly"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[3]="testprint"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[4]="1"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=16929 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:62e1ae28-d482-3786-78e4-bade79b0939a job-originating-host-name=localhost time-at-creation=1358630978 time-at-processing=1358630978 PageSize=Letter"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[6]="/private/var/spool/cups/d00006-001"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[0]="<CFProcessPath>"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[11]="SERVER_ADMIN=root@localhost"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[12]="SOFTWARE=CUPS/1.6svn"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[14]="USER=root"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[15]="CUPS_MAX_MESSAGE=2047"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[17]="CUPS_ENCRYPTION=IfRequested"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[18]="IPP_PORT=631"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[19]="CHARSET=utf-8"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[20]="LANG=en_US.UTF-8"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[21]="APPLE_LANGUAGE=en-US"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[22]="PPD=/private/etc/cups/ppd/Canon_MF5900_Series.ppd"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[23]="RIP_MAX_CACHE=128m"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[24]="CONTENT_TYPE=application/vnd.cups-banner"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[25]="DEVICE_URI=dnssd://Canon%20MF5900%20Series._pdl-datastream._tcp.local ./?bidi"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[26]="PRINTER_INFO=Canon MF5900 Series"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[27]="PRINTER_LOCATION="
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[28]="PRINTER=Canon_MF5900_Series"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[29]="PRINTER_STATE_REASONS=none"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[30]="CUPS_FILETYPE=document"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[31]="FINAL_CONTENT_TYPE=printer/Canon_MF5900_Series"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[32]="AUTH_I****"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 1149)
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl (PID 1150)
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Started backend /usr/libexec/cups/backend/dnssd (PID 1151)
    D [19/Jan/2013:16:29:39 -0500] [Job 6] capdftopdl start.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series._pdl-datastream._tcp.local."...
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series", regtype="_pdl-datastream._tcp", domain="local."...
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking for printer.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Set job-printer-state-message to "Looking for printer.", current level=INFO
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolved as "socket://Canon0b182e.local.:9100/"...
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -connecting-to-device,offline-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Executing backend "/usr/libexec/cups/backend/socket"...
    D [19/Jan/2013:16:29:39 -0500] [Job 6] load_banner(filename="/private/var/spool/cups/d00006-001")
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Page = 612x792; 14,14 to 598,778
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking up "Canon0b182e.local."...
    D [19/Jan/2013:16:29:39 -0500] [Job 6] hrDeviceDesc="Canon MF5900 Series"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] prtMarkerColorantValue.1.1 = "black"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-colors=#000000
    D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-names='"Canon CRG119 Black Toner"'
    D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-types=toner
    D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-levels=100
    D [19/Jan/2013:16:29:39 -0500] [Job 6] new_supply_state=0, change_state=ffff
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-low-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-empty-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-low-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-empty-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-near-eol-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-life-over-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-low-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-empty-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-almost-full-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-full-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-almost-over-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-over-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] new_state=0, change_state=ffff
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-empty-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -door-open-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-jam-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -input-tray-missing-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-tray-missing-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-missing-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-almost-full-report
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-full-warning
    D [19/Jan/2013:16:29:39 -0500] [Job 6] backendWaitLoop(snmp_fd=5, addr=0x7fe17b410178, side_cb=0x10a2e1013)
    D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1149 (/usr/libexec/cups/filter/cgbannertopdf) exited with no errors.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -com.canon.unsupportedsize-error
    D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1151 (/usr/libexec/cups/backend/dnssd) exited with no errors.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1150 (/Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl) stopped with status 1.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] Hint: Try setting the LogLevel to "debug" to find out more.
    D [19/Jan/2013:16:29:39 -0500] [Job 6] End of messages
    D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state=3(idle)
    D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-message="Filter failed"
    D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-reasons=none

    Maybe this will help:
    https://discussions.apple.com/thread/4158755?tstart=0
    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

  • Print window reads "Stopped 'Filter' failed, 1 Page"

    Hi
    When I go to print a doc my Print window shows the following message "Stopped 'Filter' failed, 1 Page"  and refuses to print. I have checked all of the necessary things regarding the printer i.e. calibrating, cleaning printheads, ink supplies & printing test pages etc. Have DL'd all of the up to date drivers and have ensured that I am printing via a solid USB connection and yet still I get nothing. The printer is an Advent AW-10 and was working absolutely fine until I updated to Yosemite however I'm not sure whether or not this has anything to do with it but in my experience of updating OS's it usually does, any help would be fantastic.
    The machine I'm using is a Mac Pro v10.10 OS X Yosemite
    Look forward to any ideas/help,
    Best,
    Alex

    A rule of thumb: treat any OS update as if it is untested and you are now going to give it one, hang onto your old system 'as is' so you can revert or dual boot.
    Check before installing a new OS for problems, for drivers, to insure your hardware and applications and if any need updates check here:
    http://www.roaringapps.com
    Backup - twice at least. And you may need to start with a new TimeMachine backup drive with new OS so you can revert back; also, even if it is just a smaller partition on your much larger TimeMachine drive, create a partition large enough to hold a system image, clone, that you can boot from if needed.
    And definitely do not install new OS over the old. Yes you are suppose to be able, yes there tends to be more issues though if you do - the 'easy' way can turn into the long hard road instead.
    And because it might be a good chance to reformat and initialize your drive. Or use this as an opportunity to buy and install a new better system disk drive (SSD preferable at this point - even if you have an SSD from 2-3 years back).
    On another topic: those 'forced shutdowns' only make matters worse. ie, directory corruption and damage, possible corruption of files, plist (preferences) for which:
    Got files that are not backed up? take care of just those.
    Use Recovery Mode and repair the disk drive twice, "top" drive name and again with the system volume name.
    Follow up with Safe Boot - might even do that twice.
    Use Internet Recovery Mode and do a clean install - to another drive!
    ... but before you do so, save the installer, copy it to another disk or flash drive etc and then create your own flash installer (Lion DiskMaker is very easy to use for that).
    Then you will at least have a solid system, have only Apple updates to worry about, and can begin to build back up.
    Setup Assistant makes it easy to import all your old settings and such from your old system or from TimeMachine.
    Any problems from there would be OS X 10.10.1 alone. If it IS working though, now is a great time to make a system backup image (clone, something you can restore from or boot from if needed).
    And testing done.
    People have been doing something along those lines for years, there are dozens of "lists" of "Best practice for updating or installing a new OS"
    And done right you have a good safety net so you can -
    Set aside the new Yosemite OS for later /
    Go back to Mavericks that was working and continue to use that all the time or when you need to do something (print) that requires 10.9.5.
    Then when Apple or another vendor has updates for your system, you can install and try those out.
    You could end up with backup sets for both Yosemite and Mavericks.
    And before you do install say 10.10.xyz some day, make sure you have the last version - would not want a power outage, disk failure, or the update process to go kaput and leave you with no good working system.
    See if you can repair and uninstall and reinstall - or delete - the preferences and files and printer cache etc so your system does
    Print as it should
    Shutdowns properly and no freezing
    No directory or disk issues
    SMC and NVRAM have been cleared and reset and Startup Disk is reset to the proper default volume
    Sorry for length, just meant to say "do some basic system maintenance" is all. :-)

  • HP Laserjet P4014 Stopped – 'Filter' failed

    I’ve seen discussion of this for other printers and versions of OS X. Has anyone seen this on 10.9.5 and, better still, solved it?
    If I try to print to a networked HP Laserjet P4014, the print queue gives up with the message
    Stopped – ‘Filter’ failed
    Things I have tried so far:
    downloading new HP driver software
    resetting the printing system
    changing the computer network name
    rebooting
    The only effect of all this so far is having to put back the printer’s network name and password.
    At best, I get 1 page printed, followed by a Postscript error.
    The only workaround so far: print to PDF and print the PDF from a Linux machine.

    As far as I can tell the critical thing is an RPC error. I trimmed quite a lot – I am not sure how informative this all is. I meantime also sent a tcpdump and sysdiagnose output to Apple via bug reporter so let’s see if they come up with something.
    D [15/Oct/2014:11:39:44 +0200] [Job 21] 3 filters for job:
    D [15/Oct/2014:11:39:44 +0200] [Job 21] cgpdftops (application/pdf to application/postscript, cost 25)
    D [15/Oct/2014:11:39:44 +0200] [Job 21] pstops (application/postscript to application/vnd.cups-postscript, cost 66)
    D [15/Oct/2014:11:39:44 +0200] [Job 21] /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (application/vnd.cups-postscript to printer/StaffMinor, cost 0)
    D [15/Oct/2014:11:39:44 +0200] [Job 21] argv[6]="/private/var/spool/cups/d00021-001"
    D [15/Oct/2014:11:39:44 +0200] [Job 21] envp[12]="SOFTWARE=CUPS/1.7.2"
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Looking up "print.ict.ru.ac.za"...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] STATE: -connecting-to-device
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Connected to printer...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Set job-printer-state-message to "Connected to printer...", current level=INFO
    D [15/Oct/2014:11:39:44 +0200] [Job 21] job id is 30...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Sending print data...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Set job-printer-state-message to "Sending print data...", current level=INFO
    D [15/Oct/2014:11:39:44 +0200] [Job 21] cgpdftops - using PPD file "/private/etc/cups/ppd/StaffMinor.ppd"...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] PS Matching Mode = AP_ApplicationColorMatching
    D [15/Oct/2014:11:39:44 +0200] [Job 21] cgpdftops - languageLevel = 3, mediaBox.size.width = 595, mediaBox.size.height = 842
    D [15/Oct/2014:11:39:44 +0200] [Job 21] cgpdftops - documentMediaBox.size.width = 595, documentMediaBox.size.height = 842
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Page = 595x842; 12,12 to 583,830
    D [15/Oct/2014:11:39:44 +0200] [Job 21] slow_collate=0, slow_duplex=0, slow_order=0
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Before copy_comments - %!PS-Adobe-3.0
    D [15/Oct/2014:11:39:44 +0200] [Job 21] %!PS-Adobe-3.0
    D [15/Oct/2014:11:39:44 +0200] [Job 21] PID 38050 (/usr/libexec/cups/filter/cgpdftops) exited with no errors.
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Wrote 4 pages...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Calling processor PageCounting before line %%Page: 4 4
    D [15/Oct/2014:11:39:44 +0200] [Job 21] PID 38051 (/usr/libexec/cups/filter/pstops) exited with no errors.
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Calling processor PageScanning before line %%Trailer
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Final number of pages = 4
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Pages per copy = 4
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Allowing document iterator to handle job termination...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Pre-processing tasks
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Current page number is 4
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Calling processor PageAccounting after line %%Page: 4 4
    D [15/Oct/2014:11:39:44 +0200] [Job 21] PAGE: 4 1
    D [15/Oct/2014:11:39:44 +0200] [Job 21] rpc_write_printer: RPC error 0x16c9a036
    D [15/Oct/2014:11:39:44 +0200] [Job 21] RpcWritePrinter error -1!
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Cleaning up printer-state-reasons...
    D [15/Oct/2014:11:39:44 +0200] [Job 21] STATE: -apple-job-blocked,job-completed-successfully,job-canceled-at-device,processing -to-stop-point,apple-job-error,offline-report,media-needed-warning,paused-report ,job-completed-successfully,job-printing,apple-job-restart,job-incoming,apple-jo b-intervention,apple-printer-busy,door-open-warning,apple-printer-errorstate,app le-printer-warming-up,apple-printer-active,apple-printer-manual-feed,apple-print er-unavailable,marker-supply-empty-report,offline-report,output-area-full-report ,interpreter-resource-unavailable-warning,apple-printer-page-punt,media-jam-warn ing,media-empty-warning,media-jam-warning,paused-report,apple-printer-deleting,a pple-printer-lowpower,apple-printer-printing,apple-printer-processing,offline-re port,apple-printer-unknown,toner-low-report,apple-printer-intervention,apple-pri nter-waiting,apple-printer-warming-up
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Aborting print job
    D [15/Oct/2014:11:39:44 +0200] [Job 21] rpc_abort_printer: RPC error 0x16c9a060
    D [15/Oct/2014:11:39:44 +0200] [Job 21] rpc_close_printer: RPC error 0x16c9a060
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Ready to print.
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Set job-printer-state-message to "Ready to print.", current level=INFO
    D [15/Oct/2014:11:39:44 +0200] [Job 21] smb backend (PID=38058) exited with no errors
    D [15/Oct/2014:11:39:44 +0200] [Job 21] smb backend will exit with status 0
    D [15/Oct/2014:11:39:44 +0200] [Job 21] PID 38052 (/Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProce ssing) stopped with status 1.
    D [15/Oct/2014:11:39:44 +0200] [Job 21] Hint: Try setting the LogLevel to "debug" to find out more.
    D [15/Oct/2014:11:39:44 +0200] [Job 21] End of messages
    D [15/Oct/2014:11:39:44 +0200] [Job 21] printer-state=3(idle)
    D [15/Oct/2014:11:39:44 +0200] [Job 21] printer-state-message="Filter failed"
    D [15/Oct/2014:11:39:44 +0200] [Job 21] printer-state-reasons=none
    E [15/Oct/2014:11:44:45 +0200] [Job 21] Stopping unresponsive job.

  • Message Stopped filter failed C3180

    Not printing now and message saying Stopped - 'Filter' failed.  It's a C3180 All-In-One and been excellent and reliable for 3 years.
    This question was solved.
    View Solution.

    Hello,
    I see that you're having an issue with the printer. When do you receive this error message? 
    Also, try a hard reset with the printer.
    Hard Reset:
    Unplug the power cord from the printer and wall
    Take out the toner/cartridges
    Wait 30 sec
    Plug the power cord back into the printer and wall (Make sure the printer is plugged into the wall and not a surge protector)
    Insert the toner/cartridges back into the printer
    Let me know the outcome

  • Epson XP-200 failing on CUPS with a "Filter Failed" error

    After this last update, my printer has stopped working completely, always with a "Filter failed" error. 
    Before the update it worked perfectly, never had an issue. 
    I've tried every combination of turning on and off, reinstalling the drivers, reinstalling cups, etc... nothing got any results.
    None of the related issues I found googling got me anywhere closer to having it work either. 
    If anyone has some fix for this it would be very appreciated

    You show the OS receiving an image from Photoshop, and the OS starting the Epson print driver and handing it part of the image, the driver connects to the printer, then the print driver fails. It looks like a bug in the Epson rasterizer, or the printer communication.
    You really need to talk to Epson.  Photoshop isn't involved in that error.

  • Problem printing to OKI - error msg = "filter" failed

    Okidata usually updates drivers for Mac OS upgrades but does not have one for Yosemite (yet? I hope?). The error message on the printer reads: "filter" failed. I've never seen that before. Anyone know what this means and/or how to work around it?
    Same message from all applications. Message is in the Mac Printer preferences box, not on the printer.
    I can print to old HP inkjet - my backup - but not to OKI c5800Ldn color laser printer.
    Tried deleting printer from list and adding OKI with IPP address - no joy.

    Didn't specify .... I'm using PS CS5, version 12.1

  • Stopped - 'Filter' failed, 1 page

    All of a sudden Epson 9890 won't print with the above message in the print que

    Having the same problem on my Epson Stylus Pro 7900. I printed over 30 prints in the last two days. Suddenly I began receiving the "Stopped - 'Filer' fails, 1 page" error. Was on the phone with Epson for an hour today. Deleted and reinstalled the printer and tried several other workarounds. Ultimately I was told it was a problem with Apple. On the phone with Apple for an hour today. They're saying it's an issue with Photoshop. Logged in here and it seems Apple is pointing a finger at Epson and Photoshop.
    Does ANYBODY have ANY clue why I was able to print dozens of photos over the last two weeks and SUDDENLY I can't????

  • Action to: Print current document to PDF Printer "As Image" with Specified DPI

    I FREQUENTLY do the following task on documents.  I would LOVE to have an action that did it for me.  Can someone help me create one or point me to someone who can?
    Version: Adobe Acrobat X Pro.  Windows 7 64-bit
    With current PDF file open:
    2) Print
    3) Select PDF Printer
    4) (Under advanced printer settings) choose "Print as Image", "150" DPI.
    5) OK
    6) Save file AS the original with _printed appended to the filename.
    Image1: Printer dialogue box
    Image 2: After selecting the PDF Printer and pressing "Advanced"

    The forum added some nice links and i found my answer here http://forums.adobe.com/message/1179199#1179199 - changed the registry key permissions and it's working like a charm. Thank you.

  • Please Help!  All of a sudden my Epson workforce 630 won't print.  I have combed the previous discussions and tried the suggestions; still not printing.  I get an error message that says'"Stopped, Filter failed"

    HI,
    I have combed previous discussions and tried the suggestions.  I am running OS X 10.9.2.  My Epson software is current( I just re downloaded all the drivers etc.) I uninstalled and reinstalled my printer.  I opened sharing and there is a name there. My hardware has this message if this helps:
    rastertoescpII:
      Path:          /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/ MacOS/rastertoescpII.  I have turned off, unplugged, waited... nothing.  I am able to do a test print and all is fine.  Epson only assists via email and I have to wait 24hrs.  I'm reaching out here; been banging my head against the wall since 7am today.  I really need to get back to work, sigh.  Any assistance is greatly appreciated.
    Kristin

    I was contacted by Epson support, all resolved. There were so many steps we did to resolve this; I'm unable to remember them all to share here.

  • PDF Printer not working with Acrobat 8 & Vista Ultimate 64bit

    I have not been able to print pdf's.  I am uptodate on upgrades and have installed, reinstalled printers and repaired the program etc.
    When I install an adobe printer I get the Adobe PDF Converter.  When I try to print with it, I get an audible failure signal and nothing ever happens.  Sometmes I get a sceen indicating it has failed, sometimes not.  I have had this problem since upgrading to a new computer with Vista Ultimate 64bit OS.
    I have seen various "Fixes" but none seem to address my problem or work for it.
    Anyone with the same problem and perhaps a solution?

    What version of AA8?

  • PDFs print blank page with URL on top

    Whenever I try to print a PDF from within Safari XP 4.0.4, I get a blank page with just the URL on the top line and page 1 of 1 on the bottom. I don't know if it's different when I click the printer icon or go to file/print. Help?

    Just doublechecking. Are other PDFs currently printing properly for you, George? (Say, if you're printing them directly from your Reader as opposed to printing them through Safari's Adobe PDF plugin?)

Maybe you are looking for

  • Assigning Task to a Group of people not to just one person through staffing

    We have a requirement of assigning a task to a group (team) rather than assiging to just one person. In cprojects according to the standard we create the BP for a person, then assign the task in cprojects using this BP number. This would be done if w

  • Payroll Posting - G/L Accounts

    Dear Gurus While posting the Payroll Results to the G/L accounts I am ending up with the error message"Documents Created:Incorrect". What does it mean?.Please help me out in solving this issue. Regards Govardhan Reddy

  • What is the current AE firmware version for MacBook Pro 2Ghz Core Duo?

    My losing connection every so often MPB shows: Wireless Card Type: AirPort Extreme (0x168C, 0x86) Wireless Card Locale: USA Wireless Card Firmware Version: 0.1.27

  • How to Test BAPI

    Hello Everyone, I need to test BAPI in APO. Can anyonve give me the direction how to test it. Thanks, Lasya.

  • Why is my iPod so slow?

    I have a little bit over 17g left yet my iPod is still slow. Why? Sometimes it's so laggy when I'm on the Google Chrome or Twitter app, especially Facebook app. I even deleted all of my games and I ended up with one game, which sometimes so lag and c