PDF prints blank to OJ Pro X 576dw

I have 2 PDF's open in Reader 10.1.11 on Win 8.1 Pro 64-bit. One prints fine the other prints blank. Printer is HP Office Jet Pro X 576dw.

Hi mertoman,
You may try to create a sample word document and then convert that to PDF. And try to print again.
Regards,
Ajlan Huda.

Similar Messages

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

PDF prints from Acrobat 8 Pro, but not from Acrobat 9 Pro

I have a PDF that prints fine when I print from Acrobat 8 Pro, but when I open the same PDF in Acrobat 9 Pro, only portions of each page actually print out.
All systems running Windows XP Pro, SP3
A8P 8.1.2
A9P 9.1.1
Any ideas?

Well, for those following this thread or needing a solution, I found a work-around though I'm still not sure why the initial problem exists.
In Acrobat 9 Pro, once you have the main print dialogue box open, follow the steps below:
1) Click ADVANCED
2) Select PRINT AS IMAGE
3) Set DPI to 300
4) Click OK
5) Make any other typical print setup adjustments as you normally would and finish printing as usual

Win7 does not show "Adobe PDF" printer using Acrobat 8 Pro

using Acrobat Pro 8.1.0 I cannot see or add Adobe PDF printer. I do see "Microsoft XPS Document Writer" as a printer.

Concentrate on getting the scanner working without any Adobe software. Once you can scan to a file, any OSX program (except Adobe) that can read the file can generate PDF files via the Print command.

PDF Printing Blank??

I am trying to print a pdf file which is printing blank. It is an Xcelsius Dashboard(xlf. file) which I exported to pdf using adobe acrobat 6. When I open the file (adobe reader 8) it is opening fine, but when I print it prints blank. however, when I right click the actualy image of the dashboard then click print, it prints but it's grey areas print black. File print of the print in the toolbar all seem to print blank. I have tried the same using adobe reader 9.3.4 and also X. Any feedback would be greatly appreciated.

How did you export to PDF using Acrobat 6? If you have Acrobat 6 and Reader 9 or X on the same computer you can have issues and it is not recommended, but that is not likely the cause of your problem. Try printing as image.

XP-64 - NO PDF printer installed with AA9 PRO

Installed, uninstalled, reinstalled -- still no PDF printer. Do I need to go back to AA8 Pro to be able to create PDF's with XP-64?
Seems AA9 Pro is an expensive PDF READER only.

Update to AA9 PRO SAGA:
Having spent the best part of a week sorting out this mess I have finally got this working.
Having re-installed CS3 design premium, my event log was totally filled with Version Cue 3 errors, see:
http://www.pbase.com/jacquidervan/image/100016762.gif
and
http://www.pbase.com/jacquidervan/image/100016790.gif
This prompted me to do a repair to Version Cue CS3 which basically seemed to re-install everything.
Following that repair I was unable to update Illustrator from 13 to 13.0.1 or 13.0.2. The automatic updater failed and the manual updates also failed, although at one stage when trying to update to 13.0.1, the installer reported that it had already been installed, although the Illustrator splash still reported version 13.0.0.
See: http://www.adobeforums.com/webx/.3bc43ec4/48
I completely uninstalled CS3 [again] and re-installed everything except AA8 PRO. Again, the automatic updater failed to update Illustrator. I ran the manual updater, and much to my amazement, it updated, both 13.01 and 13.02. The version cue errors are also gone.
Feeling that it was my lucky day, I proceeded to take a chance and install AA9 PRO. It installed without error ...but did not install the printer.
I followed the advice in these forums here to install the printer as described in post #25:
TEW, "Adobe PDF Printer Missing Fix - Adobe Acrobat 8.1 - Vista" #1, 31 Jul 2007 5:00 am
I then ran a repair on AA9 PRO and I now have 2 (two) printers: "Adobe PDF Converter" and "Adobe PDF".
To say that this has been an inconvenience would be an understatement.

Pdf printing issue in macbook pro

hi everyone,
since i got a macbook pro, i found this problem. it doesn't respond to command-P (printing) at all. i removed and downloaded the newest version of adobe reader, i reset printing system, updated the printer driver,.. i can't print. i use iMac to print pdf. what could i do to fix this? would it be hardware problem or software problem?
thanks for reading it.

I too have an issue w/ my Macbook Pro keyboard (2nd time since I've owned it) although this one isn't quite as severe as the one reported.
I started noticing over the past couple of weeks that when I type, I start hearing this odd "click" sound every once in a while. As I started to pay more attention to it, it appears that every time I hit the letter 'E', it sounds like the plastic beneath the key is loose or breaking (?). They key itself feels loose and I'm worried that its going to pop off. (this has happened on my Dell Inspiron a few times and its been an annoying issue ever since as it regularly pops off now).
Is this something covered under Applecare? (my previous keyboard issue was a couple of dead keys including the spacebar that required a new keyboard).
Also (side question), when I go to the concierge page to setup a time to visit an Apple Genius, there's GUEST and MEMBER login. Is Member login for those who have Applecare? If so, then what would the member number be? The Applecare agreement # doesn't seem to take.
Thanks,

Adobe PDF Printer missing (acrobat 9 pro, XP pro)

Hi,
I searched the forums and found some similar problems, but not with my config, and, no solution.
I have installed Adobe Creative Suite CS4 to a new, clean system. It runs on WIN XP Pro. This installation includes Acrobat 9 pro.
Sadly, the printer is NOT in my printers list. I cannot print to PDF via file>print.
I tried help>repair in acrobat, but no difference. I also upgraded the newest versions of my adobe software via adobe updater.
Can anybody help me please? I don't want to install third party PDF writer, I paid for Adobe and I want to use it properly. Thank you

Simon ATS:
I run the Support advisor toot, it said:
"The module found no solutions to report for the selected log file.
If you continue to have difficulties with the application,
please contact Adobe Support: http://www.adobe.com/support
System Information :
Operating System = Windows XP Professional Service Pack 3
Locale = cs"
When I wanted to close the Support tool, it said:
"Creative Suite Product Install Inspector has identified an issue that needs attention.
An issue report has been generated.
Adobe will use this issue report to help address this issue in the future."
Nothing else...
J.R. Sanford:
I checked it, and only RPC is listed. BTW I noticed, that now I am receiving worse PDF outputs from some settings like "High quality print" (from InDesign). Vectors are ugly and has edges. However, exporting to 2001x/1a is good. I am very disappointed :(

PDFs print blank page with URL on top

Whenever I try to print a PDF from within Safari XP 4.0.4, I get a blank page with just the URL on the top line and page 1 of 1 on the bottom. I don't know if it's different when I click the printer icon or go to file/print. Help?

Just doublechecking. Are other PDFs currently printing properly for you, George? (Say, if you're printing them directly from your Reader as opposed to printing them through Safari's Adobe PDF plugin?)

Having issues with PDF printing in Acrobat 7 Pro

The issue I am having is when I print from adobe Acrobat 7 it prints the page really tiny in the middle of the page, I look at all the printing options and change them and get the same result. Just wondering if anyone else seen this and what I can do to fix this.
Thanks

when you get to the print screen it looks fine on the page, I've tried all the other options for scaling and when it prints it prints really tiny in the middle of the page. I have the paper set to letter. I did't see any options about shrinking the print.

Since upgrade to Firefox 29, PDFs print blank pages (Win7Pro/Brother HL5240) - how do I fix this bug?

I think this is the same problem that others have but I have been unable to get a fix to work. Wish I hadn't upgraded from 28.0

hello Road_runner, unfortunately this is currently a bug in the integrated firefox pdf viewer that is investigated by our developers and getting addressed. in the meantime you could use a third-party pdf plugin like from adobe that you can enable in the firefox ''options > applications'' - scroll down and define the default action for the '''portable document format (pdf)'''.
[[How to disable the built-in PDF viewer and use another viewer]]

Excel Print preview stopped working and when save as pdf, pdf is blank

mac 10.5.8
excel home and student 2011
i was working on 2 documents for our accountant.
created one in excel, converted to pdf
created second one in excel, converted to pdf
there was maybe a 30 minute time lapse between these 2 files...tops
the first file does in fact have a print preview, and the pdf opens and is viewable.
HOWEVER, on the second file, there is no print preview, and pdf is blank.
(although the printer does in fact print the file with all the words and whatnot on it...)
blank pdf prints blank.
i tried xlsx, and xls to pdf, and nothing works.
it seems that all of the files created before this troublesome one can be converted and seen in print preview....even if i add a new sheet to the workbook, that works just fine...can print preview and convert pdf no problems.
now, when i try to do that with the second file, or any new excel doc, i canNOT convert or print preview....everything is blank.
one minute it was working, the next it's not.
it works for some excel files while not working for newer ones.
nothing was changed in preferences for excel, preview, or the printer, unless i accidentally typed a keyboard command that would allow this to happen.
i REALLY need to be able to convert excel to pdf! and i really don't want to have to print them out just to scan them in and save the scans as pdf...not fun.
i have been researching, or trying to research this here,and it seems that there is a known bug for office 2008, or for a different OS, but none of the work arounds for those issues are helping me here!
someone, please help me get my save as pdf back!!!!

Try different page setups and layouts. Reinstall the Office fonts, or check for new patches from Microsoft. Check in Microsoft Office forums. Mind you PDF from preview and print are not as complete as Adobe Acrobat Pro, and are based on open source PDF standards. I don't know how well the standards were at the time your Office application was written, or if 10.5's PDF standard was up to Office's snuff, or if you updating to the latest available Adobe Acrobat Reader and Plugin will help, but between Office's and Adobe's forum you may be abl eto find an answer.

Certain pdf pages do not get printed but print blank

I am a mac user (OS X Yosemite v. 10.10.2) and have used acrobat xi pro 11.0.10.
I notice once that some pages did not print from a pdf and after updating all drivers of the printer still I have the same problem.
My printer is Canon ImageClass MF 8580 CDW.
For example, I do see on the screen pages 1 through 80 of a pdf but when print only certain pages get printed and some just get printed blank.
The result is same when I print all pages or current page from the option.
Anyone has same experience?
I just tried to "save as" postscript and it is saved exactly it were to print out via a printer - print certain pages and certain pages printed blank.
This is happening even though I see all pages properly scanned in the pdf and I can see every single page in the pdf.
Not knowing how pdf and actual printing works, it is hard to figure out what is wrong with this scanned pdf to print out all pages.
Message was edited by: Wooseok Chang

I resolved this problem -
The problem was - a pdf file scanned from a scanner fails to print pages having only black; but print pages having at least two color combination (i.e. black + blue)
What I did was -
Click "advanced" and checked when "Print As Image" was unchecked.
Then click OK and Print.
Then it printed all the pages that I had trouble with, apparently having all black.
Sara Foresberg, Staff, was helping me in troubleshooting and may be able to explain why "print as image" was the key to this situation.
It is so simple solution but it took me a couple of hours... Hope this would be helpful for someone similarly situated like me.

Appleworks only prints blank pages ( whether printer, PDF or Preview)

I am at the end of my rope.
Since updating to 10.4.7, none of my Appleworks database pages work properly. The one that has customer’s special orders in it prints, previews and pdfs only blank pages.
The Appleworks database we use to place vendor orders will only print from preview. No direct-to-printer or pdfs will work.
Both databases reside on the a MacBook Pro in the front of the store. From that location:
1. Won’t print anything but blank pages
2. Won’t preview anything but blank pages
3. Won’t PDF anything but blank pages
I transferred the database to the G4 PowerBook in the back office. Same story, in all cases. It is also running 10.4.7.
We are using Appleworks 6.2.9...the same version we’ve used since its release.
I’ve trashed both the prefs and the p.list. Still nothing.
Our customer and vendor files are critical to operation of the business...we simply have to get them out. HELP!
MacBook Pro, G4 PowerBook, G4 tower Mac OS X (10.4.7)

Hello paperqueen,
In the first place-
Can you print a newly created WP document of AW6 in problem machines under OSX10.4.7?
Can you print a newly created DB document of AW6 in problem machines under OSX10.4.7?
The common factors in the two machines are not limited to OSX10.4.7.
* Problem DB is in common.
* User account problem may be in common. (e.g. certain customization in common)
So it is really an important test to create a new user account and check whether problem persists in the new user account. I repeat this because you seem not have done it in spite of Yvan's suggestion.
Also if the problems have occured since 10.4.7 update, re-applying Combo 10.4.7 updater (after repairing permissions) may clear things up.
Anyway, if you're using any input method, the following thread may be relevant:
http://discussions.apple.com/thread.jspa?threadID=455765&tstart=0
Also it has been reported in Japanese Apple Discussions board that OSX10.4.7 introduced new problem in printing, that is if file name contains Japanese character, print to PostScript printer should fail. (PostScript error should occur)
So, if your file name contains, e.g. non-ASCII character, this might be relevant.
Good luck,
H
Mac OS 9.1.x

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

PDF prints blank to OJ Pro X 576dw

Similar Messages

Maybe you are looking for