PDF prints from Acrobat 9 formatting off and security limitation after mac 10.9.2 OS security update

When I print to Acrobat from Word, the output formatting gets messed up (single lines turn to doubles, column to right shifts to the left) ; I can't combine two documents; AND I get a security erro message when I try to reduce file size.

This type of problem is best solved by submitting a formal support case with our developer support staff...

Similar Messages

PDF prints from Acrobat 8 Pro, but not from Acrobat 9 Pro

I have a PDF that prints fine when I print from Acrobat 8 Pro, but when I open the same PDF in Acrobat 9 Pro, only portions of each page actually print out.
All systems running Windows XP Pro, SP3
A8P 8.1.2
A9P 9.1.1
Any ideas?

Well, for those following this thread or needing a solution, I found a work-around though I'm still not sure why the initial problem exists.
In Acrobat 9 Pro, once you have the main print dialogue box open, follow the steps below:
1) Click ADVANCED
2) Select PRINT AS IMAGE
3) Set DPI to 300
4) Click OK
5) Make any other typical print setup adjustments as you normally would and finish printing as usual

Xperia L is turned off and restarting automatically after the 15.3.A.0.26 update.

After the new update to Build Number : 15.3.A.0.26 My Zperia L is getting switched off and restarting automatically while using the google chrome for internet surfing.I tried software update using sony pc compain for more than 8 times. Tried out all the facilities provided by sony,but it didn't come to use.My phone was working properly before this update.now i cant even use it,i dont know when its going to restart,when its going to freeze.tried out all the possible helps from sony.please find a solution.And don't provide any lame updates like this.sony mobiles are getting worse after the software updates.Please provide a stable firmware.Hoping for a favourable reply.

Do you experience the same problem in safe mode?
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
If you do, please reinstall the phone software using Update Service:
http://www.sonymobile.com/global-en/tools/update-service/
You could also try to remove SIM and SD card from the phone and try the phone without to see if you experience any problems.

Why am I having troubles printing from both the Illustrator program and the PDF I save?

I had a large Illustrator file that was made up of AutoCAD linework of an entire university campus. The file works fine and I can do anything I please. I made a 24" x 36" artboard and scaled an area to fit nicely. I also deleted a lot of contours and additional linework so the file size was not so large (went from about 40 mb to 6mb).
However, when I go to "save as" and select my artboard and save as a PDF. I open the PDF, which is 2.5mb in size, and it takes about 1 minute because of all the contours going in one by one. After I let it load, I print to my plotter as I do all the time in Adobe Acrobat X and it will bring up the window that says "Flattening" and gives "1%". After 10 minutes it reches 2%. After patiently waiting 1 hour, something popped up saying Acrobat failed to complete task and needs to close. Tried several times and it just wont print! I am Beyond frustrated. I even try rasterizing the PDF by opening it in Ps
Something I note is how my computer is working...that is how it is handling its processes via the task manager. Both times when I try to print from Illustrator and Acrobat it never makes it because it times out. My 8GB RAM desktop computer reaches max capacity in this process and devotes 6GB RAM specifically to Acrobat or Illustrator as it tries to print.
What is the deal here? I have "Save As"ed PDF's from Illustrator hundreds of times and sent them to our plotter from Acrobat. Is there something going on with my Illustrator File? I idn't think it mattered if linework was outside of the artboard when I save PDF of an artboard. I have a lot of layers in the .Il file, but most of them are off and it is just linework, no images or effects being done.
Any insight would be greatly appreciated.

Agree with what Scott said. It may just look like single lines but due to how CAD programs construct the visual appearance based on drawing primitives rather than "paths" as it is understood in AI, there could be an awful lot of them in the same place even in seemingly simple drawings. I'm sure you'd see the same performance issue if you attempted to manualyl flattening the file in AI... You will have to go in there and clean it up or even better, clean it up in the CAD program and export it differently from there...
Mylenium

When I load my print projects to Acrobat and print from Acrobat, my blacks turn green. WHY!!??!

Sometimes I have to color match at work, or just adjust images in Photoshop CS4. I save as a Adobe PDF, and load it into Acrobat Pro.
I do not flatten or convert to PDF 1a, just print from Acrobat. When I print, my blacks in the print are green. WHY??

Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number:    9G1130CJVD3MA
Manufacturer:    DP
Device Name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    0002
Cell Revision:    0158
Charge Information:
Charge Remaining (mAh):    5663
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    5663
Health Information:
Cycle Count:    59
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    261
Voltage (mV):    12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Wake on LAN:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
ID:    0x0100
Wattage (W):    60
Revision:    0x0000
Family:    0x00ba
Serial Number:    0x00262704
Charging:    No

PDFs not printing from Acrobat Reader 7.0.8

PDF don't print from Acrobat Reader 7.0.8. The same PDFs print from Preview. I've tried many PDF from various sources (over a dozen including those created on my Mac) in every case they print fro Preview and not from Reader.
I'm currently on OS 10.4.7 but This has been an issue for some time and I believe was the case with Reader 7.0.7.

FIXED!
Priner Setup Utility/Reset Printing System
Then added priner again.
Interesting that the only issue was printing from Acrobat Reader and that this fixed it. Probably deleted and "rewrote" whatever file was at issue.
Something regarding cups?
See cups error_log involved Reset Printing System
I [02/Jul/2006:01:44:11 -0400] Listening to 7f000001:631
I [02/Jul/2006:01:44:11 -0400] Listening to 300a80:0
I [02/Jul/2006:01:44:11 -0400] Loaded configuration file "/private/etc/cups/cupsd.conf"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups/certs"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups/ppd"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/etc/cups/cupsd.conf"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/var/spool/cups"
W [02/Jul/2006:01:44:11 -0400] Repairing ownership of "/private/var/spool/cups/tmp"
I [02/Jul/2006:01:44:11 -0400] Configured for up to 100 clients.
I [02/Jul/2006:01:44:11 -0400] Allowing up to 100 client connections per host.
I [02/Jul/2006:01:44:11 -0400] Full reload is required.
E [02/Jul/2006:01:44:11 -0400] LoadAllPrinters: Unable to open /private/etc/cups/printers.conf - No such file or directory
E [02/Jul/2006:01:44:11 -0400] LoadAllClasses: Unable to open /private/etc/cups/classes.conf - No such file or directory
I [02/Jul/2006:01:44:11 -0400] Full reload complete.
E [02/Jul/2006:01:44:11 -0400] getprinterattrs: resource name '/printers/StylusPhotoR200' no good!
I [02/Jul/2006:01:44:46 -0400] Setting StylusPhotoR200 device-uri to "file:///dev/null" (was "file:/dev/null".)
I [02/Jul/2006:01:44:46 -0400] Setting StylusPhotoR200 printer-is-accepting-jobs to 1 (was 0.)
I [02/Jul/2006:01:44:46 -0400] Setting StylusPhotoR200 printer-state to 3 (was 5.)
E [02/Jul/2006:01:44:46 -0400] Unable to backup printers.conf - No such file or directory
I [02/Jul/2006:01:44:46 -0400] Saving printers.conf...
I [02/Jul/2006:01:44:46 -0400] New printer 'StylusPhotoR200' added by ''.
I [02/Jul/2006:01:45:14 -0400] Adding start banner page "none" to job 1.
I [02/Jul/2006:01:45:14 -0400] Adding end banner page "none" to job 1.
I [02/Jul/2006:01:45:14 -0400] Job 1 queued on 'StylusPhotoR200' by 'cseeman'.
I [02/Jul/2006:01:45:14 -0400] Started filter /usr/libexec/cups/filter/pictwpstops (PID 627) for job 1.
I [02/Jul/2006:01:45:14 -0400] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 628) for job 1.
I [02/Jul/2006:01:45:14 -0400] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 629) for job 1.

Faded colors when printing from Acrobat - different than previous

Hi
I have read some threads about color fading when printing a PDF created in ID and printed from Acrobat. My problem is the same and I am also having the same problem with PDF's exported from Keynote (client created posters). It sounds like I should work with the PDF optimizer for the solution. Has anyone experienced the fading colors from anything other than ID or Quark made PDF's? Did the optimizer fix the problem? I find it frustrating that I can print directly from ID and not have a problem - why can't they all get along! ;0)
Using Acrobat 9, Keynote 09 and an Epson 9880 printer.
Thanks

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

Same as Source Printing from Acrobat 9

Hello Everyone,
I'm in the process of testing CS4 for deployment to a large print production environment and I'm seeing some interesting behavior in so far as it's handling of color management is concerned, specifically with Same as Source printing from Acrobat.
I currently have CS2 deployed, and we're using InDesign for page composition. We primarily accept Adobe RGB (1998) and US Web Coated (SWOP) artwork. PDFs are created from InDesign via File > Export, and we have it configured for "No Color Conversion" and "Include all Profiles." As such, our PDFs contain both RGB and CMYK artwork, all of which is tagged with an ICC profile.
In Acrobat 7, we submit these files "Same as Source" to our RIPs (Fiery and Wasatch) in order to preserve the embedded profiles. All of our color management is handled at the RIP. This works quite nicely. We have tested the submissions and the RGB and CMYK builds (color numbers) come through dead on.
With Acrobat 9 Same as Source submissions, we are seeing that the builds are changing, and that we are getting a conversion to CMYK.
-Original PDF file
Raster RGB - 191,45,47
Here are the numbers that are submitted by Acrobat, captured by our RIP:
-Acrobat 7 Same As Source
Raster RGB - 191,45,47
-Acrobat 7 Printer/Postscript Color Management
Raster CMYK- 0,244,245,0
-Acrobat 9 Same As Source
Raster CMYK - 0,242,251,0
-Acrobat 9 Printer/Postscript Color Management
Raster CMYK - 0,242,251,0
-Acrobat 9 Acrobat Color Management
Raster CMYK - 17,248,245,1
So the question is: What changes have been made in Acrobat 9 to cause for it to handle Same as Source print submissions differently? Why is it that our builds are changing when Same as Source has always been how we get "pass through" color from Acrobat?
Has anyone else run into this? From the perspective of a RIP-driven, color managed workflow, this is a serious issue, no?
(This is also posted to the Color Management forum, as it is both a color management concern generally, and an issue specificly related to Acrobat.)
Matt

We’ve done some further investigations into the differences in Same as Source printing from Acrobat 7 and Acrobat 9. For our tests we created a simple InDesign file with two red vector rectangles, one defined as Adobe RGB (1998) and one as U.S. Web Coated (SWOP). This file was then exported to PDF with “No Color Conversion” and “Include All Profiles.” The resulting PDF contained both rectangles tagged as specified, as verified with PitStop.
We then opened this PDF in both Acrobat 7 and 9 and printed to PS files (at the time, the queue for our HP5500PS was selected). Our cursory findings are:
1. The file sizes differs, which suggests that there is a difference right off the bat.
2. The printed artwork differs visually, which is troublesome.
3. In both instances, when opened in Notepad2, the page objects appear to be tagged properly with Adobe RGB and SWOP specified as the objects color space. This, on the other hand, is good.
a.       Acrobat 7
i.      RGB – Line 3342
ii.      CMYK – Line 3400
b.       Acrobat 9
i.      RGB – Line 8406
ii.      CMYK – Line 8468
4. And here's the biggie: When the PS file created from Acrobat 9 is opened in Illustrator, it says "The document does not have an embedded RGB profile" and it allows for the specification of an RGB profile ONLY. When the PS file created from Acrobat 7 is opened in Illustrator, it says "This document contains objects using both CMYK and RGB color modes. Illustrator allows only one color mode per document. Which color mode would you like to use?" Of course, this PS file SHOULD contain mixed color modes (because it came from a mixed color mode PDF), but only the PS files from Acrobat 7 do. The PS files from Acrobat 9 do NOT. This suggests to us that the PS files (and therefor print data submitted to PS queues as Same As Source) created by Acrobat 9 are not honoring the embedded ICC profiles of tagged artwork.
Does anyone out there have any thoughts or experience? If what we are finding is true, this is a major problem for Adobe's Acrobat 9 print engine.
Matt

Solution to the problem printing from Acrobat 9.4.2

Since there are nearly 200 posts in the original thread, It might be best (for those looking for a quick solution) to do this in a new thread.
The problem is that you cannot print to a network printer from Acrobat (pro) 9.4.2. Printing to a local (USB) printer seems okay.
The solution (for us) was found at http://www.hypersensory.com/content/fix-printing-after-installing-adobe-acrobat-942-update
The approach I tested was:
[T]he fast and easy way:
1.) go to the installation directory of Acrobat (C:\Program Files\Adobe\Acrobat 9.0\Acrobat)
2.) Look for the file "Adobe.Acrobat.Dependencies.manifest"
3.) Open it and delete the line <file name="atl.dll" />
4.) Reboot your machine after saving that file
This should fix the issue of being unable to print PDF file after installing 9.4.2 update for Adobe Acrobat.
With thanks to the folks at HyperSensory.com! It works!

Could someone from Adobe respond to this specific issue so that we know we are being heard? Will the fix for the print issue also resolve the 'attach to email' problem? Is there any work around other than telling users to attach directly from their email programs?
Thanks in advance for your response to our concerns.
Penny

Print to Adobe PDF printer from IE 7 crashes computer

I apologize if this has already been answered somewhere in this forum, but I could not find mention of it....I have several users inside my company and out that are having issue with printing to the Adobe PDF printer from a webpage viewed in IE 7...the computer inevitably locks up and requires a restart. It seems to vary based on the version of Acrobat or Reader they have installed, but am wondering if anyone knows of the cause and resolution? It would seem to be a battle of Microsoft Operating System versus Adobe. Most users are on Windows XP Professional, using Adobe Acrobat and Reader 8 or better. Those with 6 do not appear to have issue.
Have been circling around this problem for a month now....any help much appreciated!

I think it's time to upgrade. 64-bit systems weren't much in use at the time of Acrobat 8.0.

Can't Print from Acrobat 9 Pro on windows 7 64bit....

I have a windows 7 64-bit computer that can't print to any printer from Acrobat 9 Pro. When you try to print I get the following error:
"print driver host for 32 bit application has stopped working"
Any thoughts, it's driving me crazy....

I'm having the identical problem and the only way I can get it to work is by not trying to change the title suggested by Acrobat for the PDF.
If I try printing from Firefox and pasting in a new PDF title, it crashes Firefox.

Can't print from Acrobat

Hello, my problem is that I can't print documents from Adobe Acrobat prof.
Every time the error "a required resource cannot be loaded".
I tried to use another printer, another pc. No matter which printer it is every time the same error. On another pc (terminal server) there is no error.
I have installed the printers again, same error. I have installed adobe cs2 again. same error.
I tried to print from other cs2 application but there is the same error.
Anybody who can help ?
thanks a lot

I am a bit confused by some of the implications in your topic. You talk about printing from Acrobat, but then it seems like you are talking about creating PDFs (ok, that is reading between the lines). I am not really sure what you are doing. Might it also be an issue of a network printer? What OS; what Acrobat; and what steps are you actually taking?

Accidently deleted the Adobe PDF printer from the Printer List

Hi Guys,
I have accidently deleted the 'Adobe PDF printer' from the Printer List and am now unable to print any files to PDF from any application.
Any ideas of how to get it back?
Cheers, Nosaj68.
Power Mac G5 Mac OS X (10.3.9)

Hi Nosaj68
Welcome to Discussions.
1. In Applications/Utilities/Printer Setup Utility, select Add printer and reinstall it.
2. If you can't find this file, reinstall Adobe Acrobat and that should put it back again for you.
If this solves your question, please consider awarding stars, by checking the helpful or solved button on the post. This is not a requirement, merely an expression of thanks.
regards roam

PDF Printing from APEX 4.0

Hello
I have a requirement to create PDF reports from websites created using Apex and /or PL/SQL. The reports are a mixture of formatted text, pictures and charts.
Using BI is not an option due to the cost.
What do you recommend and where are I find simple instructions to follow (I lhave imited system / DBA skills).
Thanks for looking. All help very welcome
Regards, Pete

There are multiple options..
If you want a BETTER RESPONSE, please include the following information in your questions here:
Version of APEX?
App Server being used?
Browser being used?
Why this is important is, there are FREE plugins for APEX 4.x that will produce PDF's. There is also FOP which is included with APEX as a free print engine..
Thank you,
Tony Miller
Raleigh, NC

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Hi higi97,
How are you connected to the internet? Are you behind a particularly secure corporate firewall? Are you on Mac or Windows? Do you have any anti-malware software running on your machine that may be preventing applications other than your browser from connecting to the internet?
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave

PDF prints from Acrobat 9 formatting off and security limitation after mac 10.9.2 OS security update

Similar Messages

Maybe you are looking for