PDF Report Error When Distribute the Output?

REP-0069: Internal Error.
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
Approximately 5000 Pages
Distribute PDF File Approximately 1700 Files
How i can resolve this issue?

Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
those patches.
Reference
Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
Regards RZ

Similar Messages

Dev 6.0 Reports: Error when generating delimited output

It seems there may be a problem when trying to use the generate
delimited output command in Developer 6.0 Reports run-time.
I have a report with a formula column that performs a simple
calculation 'x is what percent of y,' where x and y are fields on
the report. From Report Builder I can preview the report and
generate delimited output without any problems. It is quite
nice. Unfortunately this is not true when using the run-time
exacutable outside of Report Builder.
The report runs without a problem, but when I choose to generate
to a file as delimited output (comma delimited with quotes as
cell wrappers) I receive the error:
'REP-1249 Column <column name> has no PL/SQL formula.' It seems
that summary columns work fine, but if the report contains a
formula column then it fails. If I remove the formula column and
generate to a file as delimited output it works fine.
Does anyone have any suggestions as to how to solve this problem?
Thanks,
Scott H.
null

Scott H. (guest) wrote:
: It seems there may be a problem when trying to use the generate
: delimited output command in Developer 6.0 Reports run-time.
: I have a report with a formula column that performs a simple
: calculation 'x is what percent of y,' where x and y are fields
on
: the report. From Report Builder I can preview the report and
: generate delimited output without any problems. It is quite
: nice. Unfortunately this is not true when using the run-time
: exacutable outside of Report Builder.
: The report runs without a problem, but when I choose to
generate
: to a file as delimited output (comma delimited with quotes as
: cell wrappers) I receive the error:
: 'REP-1249 Column <column name> has no PL/SQL formula.' It
seems
: that summary columns work fine, but if the report contains a
: formula column then it fails. If I remove the formula column
and
: generate to a file as delimited output it works fine.
: Does anyone have any suggestions as to how to solve this
problem?
: Thanks,
: Scott H.
Hi Scott,
could only guess, but try to have your report compiled to a .rep
file instead of using .rdf. Maybe it helps.
null

Undefined is not an object error when using the Output Generator with Glossary Restyling script to create WebHelp

When I use the Glossary Hotspot Wizard to create links within my topics to the terms, I then generate the project using the script (because I want to use popups instead of having the text display in-line). I did not edit this script before running it - do I need to? If so, where does the script reside? Any suggestions would be appreciated so that I can get this working as intended :-).

The error occurs during the WebHelp generation. If I generate the project
without using this script, there is no error.
The error indicates
Line no: 395
Thanks!
Julie
Julie Haddon-Cook
Senior Specialist
Messaging Engineering
Direct:      +1 770 303 3507
CVS:         224 3507
Address:   SITA | 3100 Cumberland Blvd | Atlanta, GA 30338 | USA
Website:   www.sita.aero

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Error when generating the selection screen '0005'of report 'XYZ'

Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
Saurabh

If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob

Error when selecting the Report Center tab of the Issues web DB

I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?

Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

REP-50159: Executed successfully but there were some errors when distribute

HI All,
I am using Oracle 10g Rel2 application server on linux environment. I am calling oracle reports from forms i am getting REP-50159: Executed successfully but there were some errors when distribute error.
I am using Destype :PRINTER and Desname:Printername. Please help us in resloving this issue.
Thanks & Regards,
Ram

Try editing rwlpr.sh in $ORACLEHOME/bin and change the lines (at around line 172) from
if [ ! -x $PRNCMDPATH ]
then
searchcommand $CMD
fi
to
if [ -z $PRNCMDPATH ]
then
searchcommand $CMD
fi
It worked for me :-)

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

While processing ALEAUD - "Error when locking the audit statistics"

Hello,
I am sending out IDOC for HR data and then prcessing ALEAUD inbound idoc immediatley (setting is done in WE21 partner profiles).
While processing these incomming idocs, I am getting this error "Error when locking the audit statistics for P01LOGSYS1 IMTIMEDEP HRMD_A" for few idocs. e.g. out of 1000 for 100 idocs this error will happen and IDOC goes to status 51.
If I try to process thes idocs ALEAUD using background processing and if I schedule 2 jobs at a time then I will get same error and IDOC goes to status 51.
Can someone help me out?

Hi
I tried processing the idocs in background processing as you have suggested using program RBDAPP01 (inbound).
There are 2 options in this program serial processing and parallel processing. When I select serial processing everyhting goes smooth but it takes long time. But when I select parallel processing I get same locking error mentioned above and only few idocs will get processed successfully with status 53 and all other will error out with status 51.
If I schedule 2 different jobs in background program RBDAPP01 (inbound) using serial processing then same thing will happen. only few idocs will get processed successfully with status 53 and all other will error out with status 51.
And I will get locking error ....
Note 1333417 says, " these IDocs will be processed via background runs of report RBDAPP01 \ RSEOUT00 (using background work processes) in batch mode leaving dialog work processes free for users and mission-critical processes. Hence you will not encounter the resources problems you are currently experiencing. The only other option would be to try increasing the number of available dialog work processes. The number of dialog processes must be greater than or equal to the total of the number of update and background processes per application server and must be configured across all operation mode
switches (see SAP note 74141). *However when there are a large number of IDocs being processed this is not a practical solution."*
Does that mean there is no possoble solution for this issue. If I increase dialog work processes will it be helpfull ?

Error when running the Webdynpro Application

Hi All,
I am getting the following error when testing the WDA Application. Please let me know what can I do to resolve the error. I appreciate the help. Thanks
The following error text was processed in the system DRD : Screen output without connection to user.
The error occurred on the application server DOWNEA023_DRD_06 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSTRD
Function: TRINT_POPUP_EDIT_CANCEL_SHOW of program SAPLSTRD
Form: RAISE_ERROR of program SAPLSTRD
Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
Function: TR_OBJECTS_CHECK of program SAPLSTRD
Function: RH_HRPOBJECT_CORR_AT_SAVE of program SAPLRHWM
Form: UPDATE_PLOG of program SAPLRHAP
Function: RH_UPDATE_DATABASE of program SAPLRHAP
Form: UPDATE_DATABASE of program MP100100
Form: LEAVE_ACTUAL_DYNPRO of program MP100100
Thanks

I have the same problem.
I'm trying to open up excel (Bex Analyzer) using the following code:
call function 'RSAH_LAUNCH_EXCEL'
    exporting
      i_genuniid                 = '4AW30ILXE3NN5MQTO3SW0GUY0'
     i_workbookid               =
      i_hide_sapgui              = 'X'
    importing
      e_log_handle               = l_log_handle
    exceptions
      excel_wrong_version        = 1
      excel_viewer_not_installed = 2
      bexanalyzer_not_installed = 3
      others                     = 4.

Error when posting the goods receipt

Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
Error when posting the goods receipt
Message no. CB345
Diagnosis
With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1). However, an error occurred when the goods receipt was posted.
Please do needful.
Regards,
PP

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

PDF Report Error When Distribute the Output?

Similar Messages

Maybe you are looking for